Synthetic intensity maps are generated from a 3D kink-unstable flux rope simulation using several DKIST/DL-NIRSP spectral lines to make a prediction of the observational signatures of energy transport and release. The reconstructed large field-of-view intensity mosaics and single tile sit-and-stare high-cadence image sequences show detailed, fine-scale structure and exhibit signatures of wave propagation, redistribution of heat, flows and fine-scale bursts. These fine-scale bursts are present in the synthetic Doppler velocity maps and can be interpreted as evidence for small-scale magnetic reconnection at the loop boundary. The spectral lines reveal the different thermodynamic structures of the loop, with the hotter lines showing the loop interior and braiding, and the cooler lines showing the radial edges of the loop. The synthetic observations of DL-NIRSP are found to preserve the radial expansion and hence the loop radius can be measured accurately. The electron number density can be estimated using the intensity ratio of the Fe~\textsc{xiii} lines at 10747 and 10798~\AA. The estimated density from this ratio is correct to within $\pm10\%$ during the later phases of the evolution, however it is less accurate initially when line-of-sight density inhomogeneities contribute to the Fe~\textsc{xiii} intensity, resulting in an overprediction of the density by $\approx30\%$. The identified signatures are all above a conservative estimate for instrument noise and therefore will be detectable. In summary, we have used forward modelling to demonstrate that the coronal off-limb mode of DKIST/DL-NIRSP will be able to detect multiple independent signatures of a kink-unstable loop and observe small-scale transient features including loop braiding/twisting and small-scale reconnection events occurring at the radial edge of the loop.

We investigate the onset of 2D time-dependent magnetic reconnection that is triggered using an external velocity driver located away from, and perpendicular to, an equilibrium Harris current sheet. Previous studies have typically utilised an internal trigger to initiate reconnection, e.g. initial conditions centred on the current sheet. Numerical simulations solving the compressible, resistive magnetohydrodynamics equations were performed to investigate the reconnection onset within different atmospheric layers of the Sun, namely the corona, chromosphere and photosphere. A reconnecting state is reached for all atmospheric heights considered, with the dominant physics being highly dependent on atmospheric conditions. The coronal case achieves a sharp rise in electric field for a range of velocity drivers. For the chromosphere, we find a larger velocity amplitude is required to trigger reconnection. For the photospheric environment, the electric field is highly dependent on the inflow speed; a sharp increase in electric field is obtained only as the velocity entering the reconnection region approaches the Alfven speed. Additionally, the role of ambipolar diffusion is investigated for the chromospheric case and we find that the ambipolar diffusion alters the structure of the current density in the inflow region. The rate at which flux enters the reconnection region is controlled by the inflow velocity. This determines all aspects of the reconnection start-up process, i.e. the early onset of reconnection is dominated by the advection term in Ohms law in all atmospheric layers. A lower plasma-$\beta$ enhances reconnection and creates a large change in the electric field. A high plasma-$\beta$ hinders the reconnection, yielding a sharp rise in the electric field only when the velocity flowing into the reconnection region approaches the local Alfven speed.

The signatures of energy release and energy transport for a kink-unstable coronal flux rope are investigated via forward modelling. Synthetic intensity and Doppler maps are generated from a 3D numerical simulation. The CHIANTI database is used to compute intensities for three Hinode/EIS emission lines that cover the thermal range of the loop. The intensities and Doppler velocities at simulation resolution are spatially degraded to the Hinode/EIS pixel size (1\arcsec), convolved using a Gaussian point-spread function (3\arcsec), and exposed for a characteristic time of 50 seconds. The synthetic images generated for rasters (moving slit) and sit-and-stare (stationary slit) are analysed to find the signatures of the twisted flux and the associated instability. We find that there are several qualities of a kink-unstable coronal flux rope that can be detected observationally using Hinode/EIS, namely the growth of the loop radius, the increase in intensity towards the radial edge of the loop, and the Doppler velocity following an internal twisted magnetic field line. However, EIS cannot resolve the small, transient features present in the simulation, such as sites of small-scale reconnection (e.g. nanoflares)

We study the propagation of a fast magnetoacoustic wave in a 3D magnetic field created from two magnetic dipoles. The magnetic topology contains an X-line. We aim to contribute to the overall understanding of MHD wave propagation within inhomogeneous media, specifically around X-lines. We investigate the linearised, 3D MHD equations under the assumptions of ideal and cold plasma. We utilise the WKB approximation and Charpit's method during our investigation. It is found that the behaviour of the fast magnetoacoustic wave is entirely dictated by the local, inhomogeneous, equilibrium Alfv\'en speed profile. All parts of the wave experience refraction during propagation, where the magnitude of the refraction effect depends on the location of an individual wave element within the inhomogeneous magnetic field. The X-line, along which the Alfv\'en speed is identically zero, acts as a focus for the refraction effect. There are two main types of wave behaviour: part of the wave is either trapped by the X-line or escapes the system, and there exists a critical starting region around the X-line that divides these two types of behaviour. For the set-up investigated, it is found that $15.5\%$ of the fast wave energy is trapped by the X-line. We conclude that linear, $\beta=0$ fast magnetoacoustic waves can accumulate along X-lines and thus these will be specific locations of fast wave energy deposition and thus preferential heating. The work here highlights the importance of understanding the magnetic topology of a system. We also demonstrate how the 3D WKB technique described in this paper can be applied to other magnetic configurations.

The acoustic resonator is an important model for explaining the three-minute oscillations in the chromosphere above sunspot umbrae. The steep temperature gradients at the photosphere and transition region provide the cavity for the acoustic resonator, which allows waves to be both partially transmitted and partially reflected. In this paper, a new method of estimating the size and temperature profile of the chromospheric cavity above a sunspot umbra is developed. The magnetic field above umbrae is modelled numerically in 1.5D with slow magnetoacoustic wave trains travelling along magnetic fieldlines. Resonances are driven by applying the random noise of three different colours---white, pink and brown---as small velocity perturbations to the upper convection zone. Energy escapes the resonating cavity and generates wave trains moving into the corona. Line of sight (LOS) integration is also performed to determine the observable spectra through SDO/AIA. The numerical results show that the gradient of the coronal spectra is directly correlated with the chromosperic temperature configuration. As the chromospheric cavity size increases, the spectral gradient becomes shallower. When LOS integrations is performed, the resulting spectra demonstrate a broadband of excited frequencies that is correlated with the chromospheric cavity size. The broadband of excited frequencies becomes narrower as the chromospheric cavity size increases. These two results provide a potentially useful diagnostic for the chromospheric temperature profile by considering coronal velocity oscillations.

Srivastava et al. (2010) have observed a highly twisted coronal loop, which was anchored in AR10960 during the period 04:43 UT-04:52 UT on 4 June 2007. The loop length and radius are approximately 80 Mm and 4 Mm, with a twist of 11.5 $\pi$. These observations are used as initial conditions in a three dimensional nonlinear magnetohydrodynamic simulation with parallel thermal conduction included. The initial unstable equilibrium evolves into the kink instability, from which synthetic observables are generated for various high-temperature filters of SDO/AIA. These observables include temporal and spatial averaging to account for the resolution and exposure times of SDO/AIA images. Using the simulation results, we describe the implications of coronal kink instability as observables in SDO/AIA filters.

It is known from numerical simulations that thermal conduction along magnetic field lines plays an important role in the evolution of the kink instability in coronal loops. This study presents the observational signatures of the kink instability in long coronal loops when parallel thermal conduction is included. The 3D nonlinear magnetohydrodynamic equations are solved numerically to simulate the evolution of a coronal loop that is initially in an unstable equilibrium. The loop has length 80 Mm, width 8 Mm and an initial maximum twist of Phi = 11.5 pi, where Phi is a function of the radius. The initial loop parameters are obtained from a highly twisted loop observed in the TRACE 171 A waveband. Synthetic observables are generated from the data. These observables include spatial and temporal averaging to account for the resolution and exposure times of TRACE images. Parallel thermal conduction reduces the maximum local temperature by up to an order of magnitude. This means that different spectral lines are formed and different internal loop structures are visible with or without the inclusion of thermal conduction. However, the response functions sample a broad range of temperatures. The result is that the inclusion of parallel thermal conductivity does not have as large an impact on observational signatures as the order of magnitude reduction in the maximum temperature would suggest; the net effect is a blurring of internal features of the loop structure.

A numerical model of axisymmetric convection in the presence of a vertical magnetic flux bundle and rotation about the axis is presented. The model contains a compressible plasma described by the nonlinear MHD equations, with density and temperature gradients simulating the upper layer of the sun's convection zone. The solutions exhibit a central magnetic flux tube in a cylindrical numerical domain, with convection cells forming collar flows around the tube. When the numerical domain is rotated with a constant angular velocity, the plasma forms a Rankine vortex, with the plasma rotating as a rigid body where the magnetic field is strong, as in the flux tube, while experiencing sheared azimuthal flow in the surrounding convection cells, forming a free vortex. As a result, the azimuthal velocity component has its maximum value close to the outer edge of the flux tube. The azimuthal flow inside the magnetic flux tube and the vortex flow are prograde relative to the rotating cylindrical reference frame. A retrograde flow appears at the outer wall. The most significant convection cell outside the flux tube is the location for the maximum value of the azimuthal magnetic field component. The azimuthal flow and magnetic structure are not generated spontaneously, but decay exponentially in the absence of any imposed rotation of the cylindrical domain.