We use zoom hydrodynamical simulations to investigate the properties of satellites within galaxy-sized dark-matter haloes with different assembly histories. We consider two classes of haloes at redshift $z=0$: `stalled' haloes that assembled at $z>1$ and `accreting' ones that are still forming nowadays. Previously, we showed that the stalled haloes are embedded within thick filaments of the cosmic web while the accreting ones lie where multiple thin filaments converge. We find that satellites in the two classes have both similar and different properties. Their mass spectra, radial count profiles, baryonic and stellar content, and the amount of material they shed are indistinguishable. However, the mass fraction locked in satellites is substantially larger for the accreting haloes as they experience more mergers at late times. The largest difference is found in the satellite kinematics. Substructures fall towards the accreting haloes along quasi-radial trajectories whereas an important tangential velocity component is developed, before accretion, while orbiting the filament that surrounds the stalled haloes. Thus, the velocity anisotropy parameter of the satellites ($\beta$) is positive for the accreting haloes and negative for the stalled ones. This signature enables us to tentatively categorize the Milky Way halo as stalled based on a recent measurement of $\beta$. Half of our haloes contain clusters of satellites with aligned orbital angular momenta corresponding to flattened structures in space. These features are not driven by baryonic physics and are only found in haloes hosting grand-design spiral galaxies, independently of their assembly history.

The clustering of dark matter haloes with fixed mass depends on their formation history, an effect known as assembly bias. We use zoom N -body simulations to investigate the origin of this phenomenon. For each halo at redshift z=0, we determine the time in which the physical volume containing its final mass becomes stable. We consider five examples for which this happens at z~1.5 and two that do not stabilize by z=0. The zoom simulations show that early-collapsing haloes do not grow in mass at z=0 while late-forming ones show a net inflow. The reason is that 'accreting' haloes are located at the nodes of a network of thin filaments feeding them. Conversely, each 'stalled' halo lies within a prominent filament that is thicker than the halo size. Infalling material from the surroundings becomes part of the filament while matter within it recedes from the halo. We conclude that assembly bias originates from quenching halo growth due to tidal forces following the formation of non-linear structures in the cosmic web, as previously conjectured in the literature. Also the internal dynamics of the haloes change: the velocity anisotropy profile is biased towards radial (tangential) orbits in accreting (stalled) haloes. Our findings reveal the cause of the yet unexplained dependence of halo clustering on the anisotropy. Finally, we extend the excursion-set theory to account for these effects. A simple criterion based on the ellipticity of the linear tidal field combined with the spherical collapse model provides excellent predictions for both classes of haloes.

The growth-rate and the internal dynamics of galaxy-sized dark-matter haloes depend on their location within the cosmic web. Haloes that sit at the nodes grow in mass till the present time and are dominated by radial orbits. Conversely, haloes embedded in prominent filaments do not change much in size and are dominated by tangential orbits. Using zoom hydrodynamical simulations including star formation and feedback, we study how gas accretes onto these different classes of objects that, for simplicity, we dub 'accreting' and 'stalled' haloes. We find that all haloes get a fresh supply of newly accreted gas in their inner regions, although this slowly decreases with time, in particular for the stalled haloes. The inflow of new gas is always higher than (but comparable with) that of recycled material. Overall, the cold-gas fraction increases (decreases) with time for the accreting (stalled) haloes. In all cases, a stellar disc and a bulge form at the centre of the simulated haloes. The total stellar mass is in excellent agreement with expectations based on the abundance-matching technique. Many properties of the central galaxies do not seem to correlate with the large-scale environment in which the haloes reside. However, there are two notable exceptions that characterise stalled haloes with respect to their accreting counterparts: i) the galaxy disc contains much older stellar populations; ii) its vertical scale-height is larger by a factor of two or more. This thickening is likely due to the heating of the long-lived discs by mergers and close flybys.

We introduce a method to create mock galaxy catalogues in redshift space including general relativistic effects to linear order in the cosmological perturbations. We dub our method LIGER, short for `light cones with general relativity'. LIGER takes a (N-body or hydrodynamic) Newtonian simulation as an input and outputs the distribution of galaxies in comoving redshift space. This result is achieved making use of a coordinate transformation and simultaneously accounting for lensing magnification. The calculation includes both local corrections and terms that have been integrated along the line of sight. Our fast implementation allows the production of many realizations that can be used to forecast the performance of forthcoming wide-angle surveys and to estimate the covariance matrix of the observables. To facilitate this use, we also present a variant of LIGER designed for large-volume simulations with low mass resolution. In this case, the galaxy distribution on large scales is obtained by biasing the matter-density field. Finally, we present two sample applications of LIGER. First, we discuss the impact of weak gravitational lensing onto the angular clustering of galaxies in a Euclid-like survey. In agreement with previous analytical studies, we find that magnification bias can be measured with high confidence. Second, we focus on two generally neglected Doppler-induced effects: magnification and the change of number counts with redshift. We show that the corresponding redshift-space distortions can be detected at 5.5$\sigma$ significance with the completed Square Kilometre Array.

We use two cosmological simulations of structure formation in the LambdaCDM scenario to study the evolutionary histories of dark-matter haloes and to characterize the Lagrangian regions from which they form. We focus on haloes identified at redshift z_id=0 and show that the classic ellipsoidal collapse model systematically overestimates their collapse times. If one imposes that halo collapse takes place at z_id, this model requires starting from a significantly lower linear density contrast than what is measured in the simulations at the locations of halo formation. We attempt to explain this discrepancy by testing two key assumptions of the model. First, we show that the tides felt by collapsing haloes due to the surrounding large-scale structure evolve non-linearly. Although this effect becomes increasingly important for low-mass haloes, accounting for it in the ellipsoidal collapse model only marginally improves the agreement with N-body simulations. Second, we track the time evolution of the physical volume occupied by forming haloes and show that, after turnaround, it generally stabilizes at a well-defined redshift, z_c>z_id, contrary to the basic assumption of extended Press-Schechter theory based on excursion sets. We discuss the implications of this result for understanding the origin of the mass-dependence and scatter in the linear threshold for halo formation. Finally, we show that, when tuned for collapse at z_c, a modified version of the ellipsoidal collapse model that also accounts for the triaxial nature of protohaloes predicts their linear density contrast in an unbiased way.

In the excursion set approach to structure formation initially spherical regions of the linear density field collapse to form haloes of mass $M$ at redshift $z_{\rm id}$ if their linearly extrapolated density contrast, averaged on that scale, exceeds some critical threshold, $\delta_{\rm c}(z_{\rm id})$. The value of $\delta_{\rm c}(z_{\rm id})$ is often calculated from the spherical or ellipsoidal collapse model, which provide well-defined predictions given auxiliary properties of the tidal field at a given location. We use two cosmological simulations of structure growth in a $\Lambda$ cold dark matter scenario to quantify $\delta_{\rm c}(z_{\rm id})$, its dependence on the surrounding tidal field, as well as on the shapes of the Lagrangian regions that collapse to form haloes at $z_{\rm id}$. Our results indicate that the ellipsoidal collapse model provides an accurate description of the mean dependence of $\delta_{\rm c}(z_{\rm id})$ on both the strength of the tidal field and on halo mass. However, for a given $z_{\rm id}$, $\delta_{\rm c}(z_{\rm id})$ depends strongly on the halo's characteristic formation redshift: the earlier a halo forms, the higher its initial density contrast. Surprisingly, the majority of haloes forming $today$ fall below the ellipsoidal collapse barrier, contradicting the model predictions. We trace the origin of this effect to the non-spherical shapes of Lagrangian haloes, which arise naturally due to the asymmetry of the linear tidal field. We show that a modified collapse model, that accounts for the triaxial shape of protohaloes, provides a more accurate description of the measured minimum overdensities of recently collapsed objects.

Rotational mixing in massive main sequence stars is predicted to monotonically increase their surface nitrogen abundance with time. We use this effect to design a method for constraining the age and the inclination angle of massive main sequence stars, given their observed luminosity, effective temperature, projected rotational velocity and surface nitrogen abundance. This method relies on stellar evolution models for different metallicities, masses and rotation rates. We use the population synthesis code STARMAKER to show the range of applicability of our method. We apply this method to 79 early B-type main sequence stars near the LMC clusters NGC 2004 and N 11 and the SMC clusters NGC 330 and NGC 346. From all stars within the sample, 17 were found to be suitable for an age analysis. For ten of them, which are rapidly rotating stars without a strong nitrogen enhancement, it has been previously concluded that they did not evolve as rotationally mixed single stars. This is confirmed by our analysis, which flags the age of these objects as highly discrepant with their isochrone ages. For the other seven stars, their nitrogen and isochrone ages are found to agree within error bars, what validates our method. Constraints on the inclination angle have been derived for the other 62 stars,with the implication that the nitrogen abundances of the SMC stars, for which mostly only upper limits are known, fall on average significantly below those limits. Nitrogen chronology is found to be a new useful tool for testing stellar evolution and to constrain fundamental properties of massive main sequence stars. A web version of this tool is provided.