As the complexity and volume of datasets have increased along with the capabilities of modular, open-source, easy-to-implement, visualization tools, scientists' need for, and appreciation of, data visualization has risen too. Until recently, scientists thought of the "explanatory" graphics created at a research project's conclusion as "pretty pictures" needed only for journal publication or public outreach. The plots and displays produced during a research project - often intended only for experts - were thought of as a separate category, what we here call "exploratory" visualization. In this view, discovery comes from exploratory visualization, and explanatory visualization is just for communication. Our aim in this paper is to spark conversation amongst scientists, computer scientists, outreach professionals, educators, and graphics and perception experts about how to foster flexible data visualization practices that can facilitate discovery and communication at the same time. We present an example of a new finding made using the glue visualization environment to demonstrate how the border between explanatory and exploratory visualization is easily traversed. The linked-view principles as well as the actual code in glue are easily adapted to astronomy, medicine, and geographical information science - all fields where combining, visualizing, and analyzing several high-dimensional datasets yields insight. Whether or not scientists can use such a flexible "undisciplined" environment to its fullest potential without special training remains to be seen. We conclude with suggestions for improving the training of scientists in visualization practices, and of computer scientists in the iterative, non-workflow-like, ways in which modern science is carried out.

The very long and thin infrared dark cloud "Nessie" is even longer than had been previously claimed, and an analysis of its Galactic location suggests that it lies directly in the Milky Way's mid-plane, tracing out a highly elongated bone-like feature within the prominent Scutum-Centaurus spiral arm. Re-analysis of mid-infrared imagery from the Spitzer Space Telescope shows that this IRDC is at least 2, and possibly as many as 5 times longer than had originally been claimed by Nessie's discoverers (Jackson et al. 2010); its aspect ratio is therefore at least 300:1, and possibly as large as 800:1. A careful accounting for both the Sun's offset from the Galactic plane ($\sim 25$ pc) and the Galactic center's offset from the $(l^{II},b^{II})=(0,0)$ position shows that the latitude of the true Galactic mid-plane at the 3.1 kpc distance to the Scutum-Centaurus Arm is not $b=0$, but instead closer to $b=-0.4$, which is the latitude of Nessie to within a few pc. An analysis of the radial velocities of low-density (CO) and high-density (${\rm NH}_3$) gas associated with the Nessie dust feature suggests that Nessie runs along the Scutum-Centaurus Arm in position-position-velocity space, which means it likely forms a dense `spine' of the arm in real space as well. The Scutum-Centaurus arm is the closest major spiral arm to the Sun toward the inner Galaxy, and, at the longitude of Nessie, it is almost perpendicular to our line of sight, making Nessie the easiest feature to see as a shadow elongated along the Galactic Plane from our location. Future high-resolution dust mapping and molecular line observations of the harder-to-find Galactic "bones" should allow us to exploit the Sun's position above the plane to gain a (very foreshortened) view "from above" of the Milky Way's structure.

We present a study on the shells (and bubbles) in the Perseus molecular cloud using the COMPLETE survey large-scale 12CO(1-0) and 13CO(1-0) maps. The twelve shells reported here are spread throughout most of the Perseus cloud and have circular or arc-like morphologies with a range in radius of about 0.1 to 3 pc. Most of them have not been detected before most likely as maps of the region lacked the coverage and resolution needed to distinguish them. The majority of the shells are coincident with infrared nebulosity of similar shape and have a candidate powering source near the center. We suggest they are formed by the interaction of spherical or very wide-angle winds powered by young stars inside or near the Perseus molecular cloud -a cloud that is commonly considered to be mostly forming low-mass stars. Two of the twelve shells are powered by high-mass stars close to the cloud, while the others appear to be powered by low or intermediate mass stars in the cloud. We argue that winds with a mass loss rate of about 10^-8 to 10^-6 M_sun/yr are required to produce the observed shells. Our estimates indicate that the energy input rate from these stellar winds is similar to the turbulence dissipation rate. We conclude that in Perseus the total energy input from both collimated protostellar outflows and powerful spherical winds from young stars is sufficient to maintain the turbulence in the molecular cloud. Large scale molecular line and IR continuum maps of a sample of clouds will help determine the frequency of this phenomenon in other star forming regions.

We present a study on the impact of molecular outflows in the Perseus molecular cloud complex using the COMPLETE survey large-scale 12CO(1-0) and 13CO(1-0) maps. We used three-dimensional isosurface models generated in RA-DEC-Velocity space to visualize the maps. This rendering of the molecular line data allowed for a rapid and efficient way to search for molecular outflows over a large (~ 16 sq. deg.) area. Our outflow-searching technique detected previously known molecular outflows as well as new candidate outflows. Most of these new outflow-related high-velocity features lie in regions that have been poorly studied before. These new outflow candidates more than double the amount of outflow mass, momentum, and kinetic energy in the Perseus cloud complex. Our results indicate that outflows have significant impact on the environment immediately surrounding localized regions of active star formation, but lack the energy needed to feed the observed turbulence in the entire Perseus complex. This implies that other energy sources, in addition to protostellar outflows, are responsible for turbulence on a global cloud scale in Perseus. We studied the impact of outflows in six regions with active star formation within Perseus of sizes in the range of 1 to 4 pc. We find that outflows have enough power to maintain the turbulence in these regions and enough momentum to disperse and unbind some mass from them. We found no correlation between outflow strength and star formation efficiency for the six different regions we studied, contrary to results of recent numerical simulations. The low fraction of gas that potentially could be ejected due to outflows suggests that additional mechanisms other than cloud dispersal by outflows are needed to explain low star formation efficiencies in clusters.

We present the chemistry, temperature, and dynamical state of a sample of 193 dense cores or core candidates in the Perseus Molecular cloud and compare the properties of cores associated with young stars and clusters with those which are not. The combination of our NH3 and CCS observations with previous millimeter, sub-millimeter, and Spitzer data available for this cloud enable us both to determine core properties precisely and to accurately classify cores as starless or protostellar. The properties of cores in different cluster environments and before-and-after star formation provide important constraints on simulations of star-formation, particularly under the paradigm that the essence of star formation is set by the turbulent formation of prestellar cores. We separate the influence of stellar content from that of cluster environment and find that cores within clusters have (1) higher kinetic temperatures and (2) lower fractional abundances of CCS and NH3. Cores associated with protostars have (1) slightly higher kinetic temperatures (2) higher NH3 excitation temperatures), (3) are at higher column density, have (4) slightly more non-thermal/turbulent NH3 linewidths, have (5) higher masses and have (6) lower fractional abundance of CCS. We find that neither cluster environment nor protostellar content makes a significant difference to the dynamical state of cores as estimated by the virial parameter -- most cores in each category are gravitationally bound. Overall, cluster environment and protostellar content have a smaller influence on the properties of the cores than is typically assumed, and the variation within categories is larger than the differences between categories.

We present ammonia observations of 193 dense cores and core candidates in the Perseus molecular cloud made using the Robert F. Byrd Green Bank Telescope. We simultaneously observed the NH3(1,1), NH3(2,2), CCS (2_1 -> 1_0) and CC34S (2_1 -> 1_0) transitions near 23 GHz for each of the targets with a spectral resolution of dv ~ 0.024 km/s. We find ammonia emission associated with nearly all of the (sub)millimeter sources as well as at several positions with no associated continuum emission. For each detection, we have measured physical properties by fitting a simple model to every spectral line simultaneously. Where appropriate, we have refined the model by accounting for low optical depths, multiple components along the line of sight and imperfect coupling to the GBT beam. For the cores in Perseus, we find a typical kinetic temperature of T=11 K, a typical column density of N(NH3)~ 10^14.5 /cm^2 and velocity dispersions ranging from sigma_v = 0.07 km/s to 0.7 km/s. However, many cores with velocity dispersions > 0.2 km/s show evidence for multiple velocity components along the line of sight.

The AstroMed project at Harvard University's Initiative in Innovative Computing (IIC) is working on improved visualization and data sharing solutions applicable to the fields of both astronomy and medicine. The current focus is on the application of medical imaging visualization and analysis techniques to three-dimensional astronomical data. The 3D Slicer and OsiriX medical imaging tools have been used to make isosurface and volumetric models in RA-DEC-velocity space of the Perseus star forming region from the COMPLETE Survey of Star Forming Region's spectral line maps. 3D Slicer, a brain imaging and visualization computer application developed at Brigham and Women's Hospital's Surgical Planning Lab, is capable of displaying volumes (i.e. data cubes), displaying slices in any direction through the volume, generating 3D isosurface models from the volume which can be viewed and rotated in 3D space, and making 3D models of label maps (for example CLUMPFIND output). OsiriX is able to generate volumetric models from data cubes and allows the user in real time to change the displayed intensity level, crop the models without losing the data, manipulate the model and viewing angle, and use a variety of projections. In applying 3D Slicer to 12CO and 13CO spectral line data cubes of Perseus, the visualization allowed for a rapid review of over 8 square degrees and 150,000 spectra, and the cataloging of 217 high velocity points. These points were further investigated in half of Perseus and all known outflows were detected, and 20 points were identified in these regions as possibly being associated with undocumented outflows. All IIC developed tools, as well as 3D Slicer and OsiriX, are freely available.

We present an overview of data available for the Ophiuchus and Perseus molecular clouds from ``Phase I'' of the COMPLETE Survey of Star-Forming Regions. This survey provides a range of data complementary to the Spitzer Legacy Program ``From Molecular Cores to Planet Forming Disks.'' Phase I includes: Extinction maps derived from 2MASS near-infrared data using the NICER algorithm; extinction and temperature maps derived from IRAS 60 and 100um emission; HI maps of atomic gas; 12CO and 13CO maps of molecular gas; and submillimetre continuum images of emission from dust in dense cores. Not unexpectedly, the morphology of the regions appears quite different depending on the column-density tracer which is used, with IRAS tracing mainly warmer dust and CO being biased by chemical, excitation and optical depth effects. Histograms of column-density distribution are presented, showing that extinction as derived from 2MASS/NICER gives the closest match to a log-normal distribution as is predicted by numerical simulations. All the data presented in this paper, and links to more detailed publications on their implications are publically available at the COMPLETE website.

3D Slicer, a brain imaging and visualization computer application developed at Brigham and Women's Hospital's Surgical Planning Lab, was used to visualize the IC 348 star-forming complex in Perseus in RA-DEC-Velocity space. This project is part of a collaboration between Harvard University's Astronomy Department and Medical School, and serves as a proof-of-concept technology demonstration for Harvard's Institute for Innovative Computing (IIC). 3D Slicer is capable of displaying volumes (data cubes), slices in any direction through the volume, 3D models generated from the volume, and 3D models of label maps. The 3D spectral line maps of IC 348 were created using 13CO and C18O data collected at the FCRAO (Five College Radio Astronomy Observatory). The 3D visualization makes the identification of the cloud's inner dense cores and velocity structure components easier than current conventional astronomical methods. It is planned for 3D Slicer to be enhanced with astrophysics-specific features resulting in an astronomical version to be available online through the IIC and in conjunction with the National Virtual Observatory (NVO).