Although the stellar halo accounts for just ~1% of the total stellar mass of the Milky Way, the kinematics of halo stars encode valuable information about the origins and evolution of our Galaxy. It has been shown that the high transverse velocity stars in Gaia DR2 reveal a double sequence in the Hertzsprung-Russell (HR) diagram, indicating a bifurcation in the local stellar halo within 1 kpc. We fit these stars by updating the popular Besan\c{c}on/Galaxia model, incorporating the latest observational results for the stellar halo and an improved kinematic description for the thick-disk from Sch\"onrich & Binney (2012). We are able to obtain a good match to the Gaia data and provide new constraints on the properties of the Galactic disc and stellar halo. In particular, we show that the kinematically defined thick disc contribution to this high velocity tail is ~13%. We look in greater detail using chemistry from LAMOST DR5, identifying a population of retrograde stars with thick-disc chemistry. Our thick disc kinematic model cannot account for this population and so we conclude there is likely to be a contribution from heated or accreted stars in the Solar Neighbourhood. We also investigate proposed dynamical substructures in this sample, concluding that they are probably due to resonant orbits rather than accreted populations. Finally we provide new insights on the nature of the two sequences and their relation with past accretion events and the primordial Galactic disc.

We introduce the 4-metre Multi-Object Spectroscopic Telescope (4MOST), a new high-multiplex, wide-field spectroscopic survey facility under development for the four-metre-class Visible and Infrared Survey Telescope for Astronomy (VISTA) at Paranal. Its key specifications are: a large field of view (FoV) of 4.2 square degrees and a high multiplex capability, with 1624 fibres feeding two low-resolution spectrographs ($R = \lambda/\Delta\lambda \sim 6500$), and 812 fibres transferring light to the high-resolution spectrograph ($R \sim 20\,000$). After a description of the instrument and its expected performance, a short overview is given of its operational scheme and planned 4MOST Consortium science; these aspects are covered in more detail in other articles in this edition of The Messenger. Finally, the processes, schedules, and policies concerning the selection of ESO Community Surveys are presented, commencing with a singular opportunity to submit Letters of Intent for Public Surveys during the first five years of 4MOST operations.

We highlight the power of the Gaia DR2 in studying many fine structures of the Hertzsprung-Russell diagram (HRD). Gaia allows us to present many different HRDs, depending in particular on stellar population selections. We do not aim here for completeness in terms of types of stars or stellar evolutionary aspects. Instead, we have chosen several illustrative examples. We describe some of the selections that can be made in Gaia DR2 to highlight the main structures of the Gaia HRDs. We select both field and cluster (open and globular) stars, compare the observations with previous classifications and with stellar evolutionary tracks, and we present variations of the Gaia HRD with age, metallicity, and kinematics. Late stages of stellar evolution such as hot subdwarfs, post-AGB stars, planetary nebulae, and white dwarfs are also analysed, as well as low-mass brown dwarf objects. The Gaia HRDs are unprecedented in both precision and coverage of the various Milky Way stellar populations and stellar evolutionary phases. Many fine structures of the HRDs are presented. The clear split of the white dwarf sequence into hydrogen and helium white dwarfs is presented for the first time in an HRD. The relation between kinematics and the HRD is nicely illustrated. Two different populations in a classical kinematic selection of the halo are unambiguously identified in the HRD. Membership and mean parameters for a selected list of open clusters are provided. They allow drawing very detailed cluster sequences, highlighting fine structures, and providing extremely precise empirical isochrones that will lead to more insight in stellar physics. Gaia DR2 demonstrates the potential of combining precise astrometry and photometry for large samples for studies in stellar evolution and stellar population and opens an entire new area for HRD-based studies.

We present a new analysis of the LAMOST DR1 survey spectral database performed with the code SP_Ace, which provides the derived stellar parameters T$_{\rm eff}$, log (g), [Fe/H], and [$\alpha$/Fe] for 1,097,231 stellar objects. We tested the reliability of our results by comparing them to reference results from high spectral resolution surveys. The expected errors can be summarized as $\sim$120 K in T$_{\rm eff}$, $\sim$0.2 in log (g), $\sim$0.15 dex in [Fe/H], and $\sim$0.1 dex in [$\alpha$/Fe] for spectra with S/N$>$40, with some differences between dwarf and giant stars. SP_Ace provides error estimations consistent with the discrepancies observed between derived and reference parameters. Some systematic errors are identified and discussed. The resulting catalog is publicly available at the LAMOST and CDS websites.

We present a set of 87 RAVE stars with detected solar like oscillations, observed during Campaign 1 of the K2 mission (RAVE K2-C1 sample). This dataset provides a useful benchmark for testing the gravities provided in RAVE Data Release 4 (DR4), and is key for the calibration of the RAVE Data Release 5 (DR5). In the present work, we use two different pipelines, GAUFRE (Valentini et al. 2013) and Sp_Ace (Boeche & Grebel 2016), to determine atmospheric parameters and abundances by fixing log(g) to the seismic one. Our strategy ensures highly consistent values among all stellar parameters, leading to more accurate chemical abundances. A comparison of the chemical abundances obtained here with and without the use of seismic log(g) information has shown that an underestimated (overestimated) gravity leads to an underestimated (overestimated) elemental abundance (e.g. [Mg/H] is underestimated by ~0.25 dex when the gravity is underestimated by 0.5 dex). We then perform a comparison between the seismic gravities and the spectroscopic gravities presented in the RAVE DR4 catalogue, extracting a calibration for log(g) of RAVE giants in the colour interval 0.50<(J - Ks)<0.85. Finally, we show a comparison of the distances, temperatures, extinctions (and ages) derived here for our RAVE K2-C1 sample with those derived in RAVE DR4 and DR5.DR5 performs better than DR4 thanks to the seismic calibration, although discrepancies can still be important for objects for which the difference between DR4/DR5 and seismic gravities differ by more than ~0.5 dex. The method illustrated in this work will be used for analysing RAVE targets present in the other K2 campaigns, in the framework of Galactic Archaeology investigations.

We present evidence from the RAdial Velocity Experiment (RAVE) survey of chemically separated, kinematically distinct disc components in the solar neighbourhood. We apply probabilistic chemical selection criteria to separate our sample into $\alpha$-low (`thin disc') and $\alpha$-high (`thick disc') sequences. Using newly derived distances, which will be utilized in the upcoming RAVE DR5, we explore the kinematic trends as a function of metallicity for each of the disc components. For our $\alpha$-low disc, we find a negative trend in the mean rotational velocity ($V_{\mathrm{\phi}}$) as a function of iron abundance ([Fe/H]). We measure a positive gradient $\partial V_{\mathrm{\phi}}$/$\partial$[Fe/H] for the $\alpha$-high disc, consistent with results from high-resolution surveys. We also find differences between the $\alpha$-low and $\alpha$-high discs in all three components of velocity dispersion. We discuss the implications of an $\alpha$-low, metal-rich population originating from the inner Galaxy, where the orbits of these stars have been significantly altered by radial mixing mechanisms in order to bring them into the solar neighbourhood. The probabilistic separation we propose can be extended to other data sets for which the accuracy in [$\alpha$/Fe] is not sufficient to disentangle the chemical disc components a priori. For such datasets which will also have significant overlap with Gaia DR1, we can therefore make full use of the improved parallax and proper motion data as it becomes available to investigate kinematic trends in these chemical disc components.

We report the identification of extended tidal debris potentially associated with the globular cluster NGC 3201, using the RAVE catalogue. We find the debris stars are located at a distance range of 1-7 kpc based on the forthcoming RAVE distance estimates. The derived space velocities and integrals of motion show interesting connections to NGC 3201, modulo uncertainties in the proper motions. Three stars, which are among the 4 most likely candidates for NGC 3201 tidal debris, are separated by 80 degrees on the sky yet are well matched by the 12 Gyr, [Fe/H] = -1.5 isochrone appropriate for the cluster. This is the first time tidal debris around this cluster has been reported over such a large spatial extent, with implications for the cluster$'$s origin and dynamical evolution.

Aims: We developed a new method of estimating the stellar parameters Teff, log g, [M/H], and elemental abundances. This method was implemented in a new code, SP_Ace (Stellar Parameters And Chemical abundances Estimator). This is a highly automated code suitable for analyzing the spectra of large spectroscopic surveys with low or medium spectral resolution (R=2,000-20,000). Methods: After the astrophysical calibration of the oscillator strengths of 4643 absorption lines covering the wavelength ranges 5212-6860\AA\ and 8400-8924\AA, we constructed a library that contains the equivalent widths (EW) of these lines for a grid of stellar parameters. The EWs of each line are fit by a polynomial function that describes the EW of the line as a function of the stellar parameters. The coefficients of these polynomial functions are stored in a library called the "$GCOG$ library". SP_Ace, a code written in FORTRAN95, uses the GCOG library to compute the EWs of the lines, constructs models of spectra as a function of the stellar parameters and abundances, and searches for the model that minimizes the $\chi^2$ deviation when compared to the observed spectrum. The code has been tested on synthetic and real spectra for a wide range of signal-to-noise and spectral resolutions. Results: SP_Ace derives stellar parameters such as Teff, log g, [M/H], and chemical abundances of up to ten elements for low to medium resolution spectra of FGK-type stars with precision comparable to the one usually obtained with spectra of higher resolution. Systematic errors in stellar parameters and chemical abundances are presented and identified with tests on synthetic and real spectra. Stochastic errors are automatically estimated by the code for all the parameters. A simple Web front end of SP_Ace can be found at http://dc.g-vo.org/SP_ACE, while the source code will be published soon.

The globular cluster H4, located in the center of the Fornax dwarf spheroidal galaxy, is crucial for understanding the formation and chemical evolution of star clusters in low-mass galactic environments. H4 is peculiar because the cluster is significantly more metal-rich than the galaxy's other clusters, is located near the galaxy center, and may also be the youngest cluster in the galaxy. In this study, we present detailed chemical abundances derived from high-resolution (R~28000) spectroscopy of an isolated H4 member star for comparison with a sample of 22 nearby Fornax field stars. We find the H4 member to be depleted in the alpha-elements Si, Ca, and Ti with [Si/Fe]=-0.35+-0.34, [Ca/Fe]=+0.05+-0.08, and [Ti/Fe]=-0.27+-0.23, resulting in an average [alpha/Fe]=-0.19+-0.14. If this result is representative of the average cluster properties, H4 is the only known system with a low [alpha/Fe] ratio and a moderately low metallicity embedded in an intact birth environment. For the field stars we find a clear sequence, seen as an early depletion in [alpha/Fe] at low metallicities, in good agreement with previous measurements. H4 falls on top of the observed field star [alpha/Fe] sequence and clearly disagrees with the properties of Milky Way halo stars. We therefore conclude that within a galaxy, the chemical enrichment of globular clusters may be closely linked to the enrichment pattern of the field star population. The low [alpha/Fe] ratios of H4 and similar metallicity field stars in Fornax give evidence that slow chemical enrichment environments, such as dwarf galaxies, may be the original hosts of alpha-depleted clusters in the halos of the Milky Way and M31.

We present the identification of potential members of nearby Galactic globular clusters using radial velocities from the RAdial Velocity Experiment Data Release 4 (RAVE-DR4) survey database. Our identifications are based on three globular clusters -- NGC 3201, NGC 5139 ($\omega$ Cen) and NGC 362 -- all of which are shown to have |RV|>100 km/s. The identification of globular cluster stars in RAVE DR4 data offers a unique opportunity to test the precision and accuracy of the stellar parameters determined with the currently available Stellar Parameter Pipelines (SPPs) used in the survey, as globular clusters are ideal testbeds for the validation of stellar atmospheric parameters, abundances, distances and ages. For both NGC 3201 and $\omega$ Cen, there is compelling evidence for numerous members (> 10) in the RAVE database; in the case of NGC 362 the evidence is more ambiguous, and there may be significant foreground and/or background contamination in our kinematically-selected sample. A comparison of the RAVE-derived stellar parameters and abundances with published values for each cluster and with BASTI isochrones for ages and metallicities from the literature reveals overall good agreement, with the exception of the apparent underestimation of surface gravities for giants, in particular for the most metal-poor stars. Moreover, if the selected members are part of the main body of each cluster our results would also suggest that the distances from Binney et al. 2013, where only isochrones more metal-rich than -0.9 dex were used, are typically underestimated by ~ 40% with respect to the published distances for the clusters, while the distances from Zwitter et al. 2010 show stars ranging from 1 to ~ 6.5 kpc -- with indications of a trend toward higher distances at lower metallicities -- for the three clusters analysed in this study.

We aim to characterize high-velocity (HiVel) stars in the solar vicinity both chemically and kinematically using the fourth data release of the RAdial Velocity Experiment (RAVE). We used a sample of 57 HiVel stars with Galactic rest-frame velocities larger than 275 km s$^{-1}$. With 6D position and velocity information, we integrated the orbits of the HiVel stars and found that, on average, they reach out to 13 kpc from the Galactic plane and have relatively eccentric orbits consistent with the Galactic halo. Using the stellar parameters and [$\alpha$/Fe] estimates from RAVE, we found the metallicity distribution of the HiVel stars peak at [M/H] = -1.2 dex and is chemically consistent with the inner halo. There are a few notable exceptions that include a hypervelocity star (HVS) candidate, an extremely high-velocity bound halo star, and one star that is kinematically consistent with the halo but chemically consistent with the disk. High-resolution spectra were obtained for the metal-rich HiVel star candidate and the second highest velocity star in the sample. Using these high-resolution data, we report the discovery of a metal-rich halo star that has likely been dynamically ejected into the halo from the Galactic thick disk. This discovery could aid in explaining the assembly of the most metal-rich component of the Galactic halo.

Galactic Archaeology, i.e. the use of chemo-dynamical information for stellar samples covering large portions of the Milky Way to infer the dominant processes involved in its formation and evolution, is now a powerful method thanks to the large recently completed and ongoing spectroscopic surveys. It is now important to ask the right questions when analyzing and interpreting the information contained in these rich datasets. To this aim, we have developed a chemodynamical model for the Milky Way that provides quantitative predictions to be compared with the chemo-kinematical properties extracted from the stellar spectra. Three key parameters are needed to make the comparison between data and model predictions useful in order to advance in the field, namely: precise proper-motions, distances and ages. The uncertainties involved in the estimate of ages and distances for field stars are currently the main obstacles in the Galactic Archaeology method. Two important developments might change this situation in the near future: asteroseismology and the now launched Gaia. When combined with the large datasets from surveys like RAVE, SEGUE, LAMOST, Gaia-ESO, APOGEE , HERMES and the future 4MOST we will have the basic ingredients for the reconstruction of the MW history in hands. In the light of these observational advances, the development of detailed chemo-dynamical models tailored to the Milky Way is urgently needed in the field. Here we show the steps we have taken, both in terms of data analysis and modelling. The examples shown here illustrate how powerful can the Galactic Archaeology method become once ages and distances are known with better precision than what is currently feasible.

Stellar population studies of globular clusters have suggested that the brightest clusters in the Galaxy might actually be the remnant nuclei of dwarf spheroidal galaxies. If the present Galactic globular clusters formed within larger stellar systems, they are likely surrounded by extra-tidal halos and/or tails made up of stars that were tidally stripped from their parent systems. The stellar surroundings around globular clusters are therefore one of the best places to look for the remnants of an ancient dwarf galaxy. Here an attempt is made to search for tidal debris around the supernovae enriched globular clusters M22 and NGC 1851 as well as the kinematically unique cluster NGC 3201. The stellar parameters from the Radial Velocity Experiment (RAVE) are used to identify stars with RAVE metallicities, radial velocities and elemental-abundances consistent with the abundance patterns and properties of the stars in M22, NGC 1851 and NGC 3201. The discovery of RAVE stars that may be associated with M22 and NGC 1851 are reported, some of which are at projected distances of ~10 degrees away from the core of these clusters. Numerous RAVE stars associated with NGC 3201 suggest that either the tidal radius of this cluster is underestimated, or that there are some unbound stars extending a few arc minutes from the edge of the cluster's radius. No further extra-tidal stars associated with NGC 3201 could be identified. The bright magnitudes of the RAVE stars make them easy targets for high resolution follow-up observations, allowing an eventual further chemical tagging to solidify (or exclude) stars outside the tidal radius of the cluster as tidal debris. In both our radial velocity histograms of the regions surrounding NGC 1851 and NGC 3201, a peak of stars at 230 km/s is seen, consistent with extended tidal debris from omega Centauri.

We provide APASS photometry in the Landolt BV and Sloan g'r'i' bands for all the 425,743 stars included in the latest 4th RAVE Data Release. The internal accuracy of the APASS photometry of RAVE stars, expressed as error of the mean of data obtained and separately calibrated over a median of 4 distinct observing epochs and distributed between 2009 and 2013, is 0.013, 0.012, 0.012, 0.014 and 0.021 mag for B, V, g', r' and i' band, respectively. The equally high external accuracy of APASS photometry has been verified on secondary Landolt and Sloan photometric standard stars not involved in the APASS calibration process, and on a large body of literature data on field and cluster stars, confirming the absence of offsets and trends. Compared with the Carlsberg Meridian Catalog (CMC-15), APASS astrometry of RAVE stars is accurate to a median value of 0.098 arcsec. Brightness distribution functions for the RAVE stars have been derived in all bands. APASS photometry of RAVE stars, augmented by 2MASS JHK infrared data, has been chi2 fitted to a densely populated synthetic photometric library designed to widely explore in temperature, surface gravity, metallicity and reddening. Resulting Teff and E(B-V), computed over a range of options, are provided and discussed, and will be kept updated in response to future APASS and RAVE data releases. In the process it is found that the reddening caused by an homogeneous slab of dust, extending for 140 pc on either side of the Galactic plane and responsible for E(B-V,poles)=0.036 +/- 0.002 at the galactic poles, is a suitable approximation of the actual reddening encountered at Galactic latitudes |b|>=25 deg.

We provide new constraints on the chemo-dynamical models of the Milky Way by measuring the radial and vertical chemical gradients for the elements Mg, Al, Si, Ti, and Fe in the Galactic disc and the gradient variations as a function of the distance from the Galactic plane ($Z$). We selected a sample of giant stars from the RAVE database using the gravity criterium 1.7$<$log g$<$2.8. We created a RAVE mock sample with the Galaxia code based on the Besan\c con model and selected a corresponding mock sample to compare the model with the observed data. We measured the radial gradients and the vertical gradients as a function of the distance from the Galactic plane $Z$ to study their variation across the Galactic disc. The RAVE sample exhibits a negative radial gradient of $d[Fe/H]/dR=-0.054$ dex kpc$^{-1}$ close to the Galactic plane ($|Z|<0.4$ kpc) that becomes flatter for larger $|Z|$. Other elements follow the same trend although with some variations from element to element. The mock sample has radial gradients in fair agreement with the observed data. The variation of the gradients with $Z$ shows that the Fe radial gradient of the RAVE sample has little change in the range $|Z|\lesssim0.6$ kpc and then flattens. The iron vertical gradient of the RAVE sample is slightly negative close to the Galactic plane and steepens with $|Z|$. The mock sample exhibits an iron vertical gradient that is always steeper than the RAVE sample. The mock sample also shows an excess of metal-poor stars in the [Fe/H] distributions with respect to the observed data. These discrepancies can be reduced by decreasing the number of thick disc stars and increasing their average metallicity in the Besan\c con model.

We investigate the kinematic parameters of the Milky Way disc using the RAVE and GCS stellar surveys. We do this by fitting a kinematic model to the data taking the selection function of the data into account. For stars in the GCS we use all phase-space coordinates, but for RAVE stars we use only $(l,b,v_{\rm los})$. Using MCMC technique, we investigate the full posterior distributions of the parameters given the data. We investigate the `age-velocity dispersion' relation for the three kinematic components ($\sigma_R,\sigma_{\phi},\sigma_z$), the radial dependence of the velocity dispersions, the Solar peculiar motion ($U_{\odot},V_{\odot}, W_{\odot} $), the circular speed $\Theta_0$ at the Sun and the fall of mean azimuthal motion with height above the mid-plane. We confirm that the Besan\c{c}on-style Gaussian model accurately fits the GCS data, but fails to match the details of the more spatially extended RAVE survey. In particular, the Shu distribution function (DF) handles non-circular orbits more accurately and provides a better fit to the kinematic data. The Gaussian distribution function not only fits the data poorly but systematically underestimates the fall of velocity dispersion with radius. We find that correlations exist between a number of parameters, which highlights the importance of doing joint fits. The large size of the RAVE survey, allows us to get precise values for most parameters. However, large systematic uncertainties remain, especially in $V_{\odot}$ and $\Theta_0$. We find that, for an extended sample of stars, $\Theta_0$ is underestimated by as much as $10\%$ if the vertical dependence of the mean azimuthal motion is neglected. Using a simple model for vertical dependence of kinematics, we find that it is possible to match the Sgr A* proper motion without any need for $V_{\odot}$ being larger than that estimated locally by surveys like GCS.

We present alpha-element abundances of Mg, Si, and Ti for a large sample of field stars in two outer fields of the Fornax dwarf spheroidal galaxy (dSph), obtained with VLT/GIRAFFE (R~16,000). Due to the large fraction of metal-poor stars in our sample, we are able to follow the alpha-element evolution from [Fe/H]=-2.5 continuously to [Fe/H]=-0.7 dex. For the first time we are able to resolve the turnover from the Type II supernovae (SNe) dominated, alpha-enhanced plateau down to subsolar [alpha/Fe] values due to the onset of SNe Ia, and thus to trace the chemical enrichment efficiency of the galaxy. Our data support the general concept of an alpha-enhanced plateau at early epochs, followed by a well-defined "knee", caused by the onset of SNe Ia, and finally a second plateau with sub-solar [alpha/Fe] values. We find the position of this knee to be at [Fe/H]=-1.9 and therefore significantly more metal-poor than expected from comparison with other dSphs and standard evolutionary models. Surprisingly, this value is rather comparable to the knee in Sculptor, a dSph about 10 times less luminous than Fornax. Using chemical evolution models, we find that both the position of the knee as well as the subsequent plateau at sub-solar level can hardly be explained unless the galaxy experienced several discrete star formation events with a drastic variation in star formation efficiency, while a uniform star formation can be ruled out. One possible evolutionary scenario is that Fornax experienced one or several major accretion events from gas-rich systems in the past, so that its current stellar mass is not indicative of the chemical evolution environment at ancient times. If Fornax is the product of several smaller building blocks, this may also have implications of the understanding on the formation process of dSphs in general.

We investigate the chemo-kinematic properties of the Milky Way disc by exploring the first year of data from the Apache Point Observatory Galactic Evolution Experiment (APOGEE), and compare our results to smaller optical high-resolution samples in the literature, as well as results from lower resolution surveys such as GCS, SEGUE and RAVE. We start by selecting a high-quality sample in terms of chemistry ($\sim$ 20.000 stars) and, after computing distances and orbital parameters for this sample, we employ a number of useful subsets to formulate constraints on Galactic chemical and chemodynamical evolution processes in the Solar neighbourhood and beyond (e.g., metallicity distributions -- MDFs, [$\alpha$/Fe] vs. [Fe/H] diagrams, and abundance gradients). Our red giant sample spans distances as large as 10 kpc from the Sun. We find remarkable agreement between the recently published local (d $<$ 100 pc) high-resolution high-S/N HARPS sample and our local HQ sample (d $<$ 1 kpc). The local MDF peaks slightly below solar metallicity, and exhibits an extended tail towards [Fe/H] $= -$1, whereas a sharper cut-off is seen at larger metallicities. The APOGEE data also confirm the existence of a gap in the [$\alpha$/Fe] vs. [Fe/H] abundance diagram. When expanding our sample to cover three different Galactocentric distance bins, we find the high-[$\alpha$/Fe] stars to be rare towards the outer zones, as previously suggested in the literature. For the gradients in [Fe/H] and [$\alpha$/Fe], measured over a range of 6 $ < $ R $ <$ 11 kpc in Galactocentric distance, we find a good agreement with the gradients traced by the GCS and RAVE dwarf samples. For stars with 1.5 $<$ z $<$ 3 kpc, we find a positive metallicity gradient and a negative gradient in [$\alpha$/Fe].

The velocity dispersions of stars near the Sun are known to increase with stellar age, but age can be difficult to determine so a proxy like the abundance of alpha elements (e.g., Mg) with respect to iron, [alpha/Fe], is used. Here we report an unexpected behavior found in the velocity dispersion of a sample of giant stars from the RAdial Velocity Experiment (RAVE) survey with high quality chemical and kinematical information, in that it decreases strongly for stars with [Mg/Fe] > 0.4 dex (i.e., those that formed in the first Gyr of the Galaxy's life). These findings can be explained by perturbations from massive mergers in the early Universe, which have affected more strongly the outer parts of the disc, and the subsequent radial migration of stars with cooler kinematics from the inner disc. Similar reversed trends in velocity dispersion are also found for different metallicity subpopulations. Our results suggest that the Milky Way disc merger history can be recovered by relating the observed chemo-kinematic relations to the properties of past merger events.

We construct new estimates on the Galactic escape speed at various Galactocentric radii using the latest data release of the Radial Velocity Experiment (RAVE DR4). Compared to previous studies we have a database larger by a factor of 10 as well as reliable distance estimates for almost all stars. Our analysis is based on the statistical analysis of a rigorously selected sample of 90 high-velocity halo stars from RAVE and a previously published data set. We calibrate and extensively test our method using a suite of cosmological simulations of the formation of Milky Way-sized galaxies. Our best estimate of the local Galactic escape speed, which we define as the minimum speed required to reach three virial radii $R_{340}$, is $533^{+54}_{-41}$ km/s (90% confidence) with an additional 5% systematic uncertainty, where $R_{340}$ is the Galactocentric radius encompassing a mean over-density of 340 times the critical density for closure in the Universe. From the escape speed we further derive estimates of the mass of the Galaxy using a simple mass model with two options for the mass profile of the dark matter halo: an unaltered and an adiabatically contracted Navarro, Frenk & White (NFW) sphere. If we fix the local circular velocity the latter profile yields a significantly higher mass than the un-contracted halo, but if we instead use the statistics on halo concentration parameters in large cosmological simulations as a constraint we find very similar masses for both models. Our best estimate for $M_{340}$, the mass interior to $R_{340}$ (dark matter and baryons), is $1.3^{+0.4}_{-0.3} \times 10^{12}$ M$_\odot$ (corresponding to $M_{200} = 1.6^{+0.5}_{-0.4} \times 10^{12}$ M$_\odot$). This estimate is in good agreement with recently published independent mass estimates based on the kinematics of more distant halo stars and the satellite galaxy Leo I.

By selecting in the RAVE-DR4 survey the stars located between 1 and 2 kpc above the Galactic plane, we question the consistency of the simplest three-component model (thin disc, thick disc, halo) for the Milky Way. We confirm that the metallicity and azimuthal velocity distribution functions of the thick disc are not Gaussian. In particular, we find that the thick disc has an extended metallicity tail going at least down to [M/H]=-2 dex, contributing roughly at 3% of the entire thick disc population and having a shorter scale-length compared to the canonical thick disc. The mean azimuthal velocity of these metal-poor stars allows us to estimate the correlation between the metallicity and the orbital velocity, which is an important constraint on the formation mechanisms of the Galactic thick disc. Given our simple approach, we find dVphi/d[M/H] ~ 50 km/s/dex, which is in a very good agreement with previous literature values. We complete the study with a brief discussion on the implications of the formation scenarios for the thick disc, and suggest that given the above mentioned characteristics, a thick disc mainly formed by radial migration mechanisms seems unlikely.

Aim: We aim at measuring the chemical gradients of the elements Mg, Al, Si, and Fe along the Galactic radius to provide new constraints on the chemical evolution models of the Galaxy and Galaxy models such as the Besancon model. Methods: We analysed three different samples selected from three independent datasets: a sample of 19,962 dwarf stars selected from the RAVE database, a sample of 10,616 dwarf stars selected from the Geneva-Copenhagen Survey (GCS) dataset, and a mock sample (equivalent to the RAVE sample) created by using the GALAXIA code, which is based on the Besancon model. We measured the chemical gradients as functions of the guiding radius (Rg) at different distances from the Galactic plane reached by the stars along their orbit (Zmax). Results: The chemical gradients of the RAVE and GCS samples are negative and show consistent trends, although they are not equal: at Zmax<0.4 kpc and 4.5<Rg(kpc)<9.5, the iron gradient for the RAVE sample is d[Fe/H]/dRg=-0.065 dex kpc^{-1}, whereas for the GCS sample it is d[Fe/H]/dRg=-0.043 dex kpc^{-1} with internal errors +-0.002 and +-0.004 dex kpc^{-1}, respectively. The gradients of the RAVE and GCS samples become flatter at larger Zmax. Conversely, the mock sample has a positive iron gradient of d[Fe/H]/dRg=+0.053+-0.003 dex kpc^{-1} at Zmax<0.4 kpc and remains positive at any Zmax. These positive and unrealistic values originate from the lack of correlation between metallicity and tangential velocity in the Besancon model. The discrepancies between the observational samples and the mock sample can be reduced by i) decreasing the density, ii) decreasing the vertical velocity, and iii) increasing the metallicity of the thick disc in the Besancon model.

The RAVE survey, combined with proper motions and distance estimates, can be used to study in detail stellar kinematics in the extended solar neighbourhood (solar suburb). Using the red clump, we examine the mean velocity components in 3D between an R of 6 and 10 kpc and a Z of -2 to 2 kpc, concentrating on North-South differences. Simple parametric fits to the R, Z trends for VPHI and the velocity dispersions are presented. We confirm the recently discovered gradient in mean Galactocentric radial velocity, VR, finding that the gradient is more marked below the plane, with a Z gradient also present. The vertical velocity, VZ, also shows clear structure, with indications of a rarefaction-compression pattern, suggestive of wave-like behaviour. We perform a rigorous error analysis, tracing sources of both systematic and random errors. We confirm the North-South differences in VR and VZ along the line-of-sight, with the VR estimated independent of the proper motions. The complex three-dimensional structure of velocity space presents challenges for future modelling of the Galactic disk, with the Galactic bar, spiral arms and excitation of wave-like structures all probably playing a role.

RAVE, the unbiased magnitude limited survey of the southern sky stars, contained 456,676 medium-resolution spectra at the time of our analysis. Spectra cover the CaII IRT range which is a known indicator of chromospheric activity. Our previous work (Matijevi\v{c} et al. 2012) classified all spectra using locally linear embedding. It identified 53,347 cases with a suggested emission component in calcium lines. Here we use a spectral subtraction technique to measure the properties of this emission. Synthetic templates are replaced by the observed spectra of non-active stars to bypass the difficult computations of non-LTE profiles of the line cores and stellar parameter dependence. We derive both the equivalent width of the excess emission for each calcium line on a 5\AA\ wide interval and their sum EW_IRT for ~44,000 candidate active dwarf stars with S/N>20 and with no respect to the source of their emission flux. From these ~14,000 show a detectable chromospheric flux with at least 2\sigma\ confidence level. Our set of active stars vastly enlarges previously known samples. Atmospheric parameters and in some cases radial velocities of active stars derived from automatic pipeline suffer from systematic shifts due to their shallower calcium lines. We re-estimate the effective temperature, metallicity and radial velocities for candidate active stars. The overall distribution of activity levels shows a bimodal shape, with the first peak coinciding with non-active stars and the second with the pre main-sequence cases. The catalogue will be publicly available with the next RAVE public data releases.

We present the stellar atmospheric parameters (effective temperature, surface gravity, overall metallicity), radial velocities, individual abundances and distances determined for 425 561 stars, which constitute the fourth public data release of the RAdial Velocity Experiment (RAVE). The stellar atmospheric parameters are computed using a new pipeline, based on the algorithms of MATISSE and DEGAS. The spectral degeneracies and the 2MASS photometric information are now better taken into consideration, improving the parameter determination compared to the previous RAVE data releases. The individual abundances for six elements (magnesium, aluminum, silicon, titanium, iron and nickel) are also given, based on a special-purpose pipeline which is also improved compared to that available for the RAVE DR3 and Chemical DR1 data releases. Together with photometric information and proper motions, these data can be retrieved from the RAVE collaboration website and the Vizier database.

Context. Galactic open clusters (OCs) mainly belong to the young stellar population in the Milky Way disk, but are there groups and complexes of OCs that possibly define an additional level in hierarchical star formation? Current compilations are too incomplete to address this question, especially regarding radial velocities (RVs) and metallicities ($[M/H]$). Aims. Here we provide and discuss newly obtained RV and $[M/H]$ data, which will enable us to reinvestigate potential groupings of open clusters and associations. Methods.We extracted additional RVs and $[M/H]$ from the RAdial Velocity Experiment (RAVE) via a cross-match with the Catalogue of Stars in Open Cluster Areas (CSOCA). For the identified OCs in RAVE we derived RV and $[M/H]$ from a cleaned working sample and compared the results with previous findings. Results. Although our RAVE sample does not show the same accuracy as the entire survey, we were able to derive reliable RV for 110 Galactic open clusters. For 37 OCs we publish RV for the first time. Moreover, we determined $[M/H]$ for 81 open clusters, extending the number of OCs with $[M/H]$ by 69.

Aims: We study the relations between stellar kinematics and chemical abundances of a large sample of RAVE giants in search for selection criteria needed for disentangling different Galactic stellar populations. Methods: We select a sample of 2167 giant stars with signal-to-noise per spectral measurements above 75 from the RAVE chemical catalogue and follow the analysis performed by Gratton and colleagues on 150 subdwarf stars spectroscopically observed at high-resolution. We then use a larger sample of 9131 giants (with signal-to-noise above 60) to investigate the chemo-kinematical characteristics of our stars by grouping them into nine subsamples with common eccentricity ($e$) and maximum distance achieved above the Galactic plane ($Z_max$). Results: The RAVE kinematical and chemical data proved to be reliable by reproducing the results by Gratton et al. obtained with high-resolution spectroscopic data. Our analysis, based on the $e$-$Z_max$ plane combined with additional orbital parameters and chemical information, provides an alternative way of identifying different populations of stars. In addition to extracting canonical thick- and thin-disc samples, we find a group of stars in the Galactic plane ($Z_max<1$ kpc and 0.4 $< e < $0.6), which show homogeneous kinematics but differ in their chemical properties. We interpret this as a clear sign that some of these stars have experienced the effects of heating and/or radial migration, which have modified their original orbits. The accretion origin of such stars cannot be excluded.

Radial velocity surveys such as the Radial Velocity Experiment (RAVE) provide us with measurements of hundreds of thousands of nearby stars most of which belong to the Galactic thin, thick disk or halo. Ideally, to study the Galactic disks (both thin and thick) one should make use of the multi-dimensional phase-space and the whole pattern of chemical abundances of their stellar populations. In this paper, with the aid of the RAVE Survey, we study the thin and thick disks of the Milky Way, focusing on the latter. We present a technique to disentangle the stellar content of the two disks based on the kinematics and other stellar parameters such as the surface gravity of the stars. Using the Padova Galaxy Model, we checked the ability of our method to correctly isolate the thick disk component from the Galaxy mixture of stellar populations. We introduce selection criteria in order to clean the observed radial velocities from the Galactic differential rotation and to take into account the partial sky coverage of RAVE. We developed a numerical technique to statistically disentangle thin and thick disks from their mixture. We deduce the components of the solar motion relative to the Local Standard of Rest (LSR) in the radial and vertical direction, the rotational lag of the thick disk component relative to the LSR, and the square root of the absolute value of the velocity dispersion tensor for the thick disk alone. The analysis of the thin disk is presented in another paper. We find good agreement with previous independent parameter determinations. In our analysis we used photometrically determined distances. In the Appendix we show that similar values can be found for the thick disk alone as derived in the main sections of our paper even without the knowledge of photometric distances.

Aims. We study the Milky Way thin disk with the Radial Velocity Experiment (RAVE) survey. We consider the thin and thick disks as different Galactic components and present a technique to statistically disentangle the two populations. Then we focus our attention on the thin disk component. Methods. We disentangle the thin disk component from amixture of the thin and thick disks using a data set providing radial velocities, proper motions, and photometrically determined distances. Results. We present the trend of the velocity dispersions in the thin disk component of the Milky Way (MW) in the radial direction above and below the Galactic plane using data from the RAdial Velocity Experiment (RAVE). The selected sample is a limited subsample from the entire RAVE catalogue, roughly mapping up to 500 pc above and below the Galactic plane, a few degrees in azimuthal direction and covering a radial extension of 2.0 kpc around the solar position. The solar motion relative to the local standard of rest is also re-determined with the isolated thin disk component. Major results are the trend of the velocity mean and dispersion in the radial and vertical direction. In addition the azimuthal components of the solar motion relative to the local standard of rest and the velocity dispersion are discussed.

Using the RAVE survey, we recently brought to light a gradient in the mean galactocentric radial velocity of stars in the extended solar neighbourhood. This gradient likely originates from non-axisymmetric perturbations of the potential, among which a perturbation by spiral arms is a possible explanation. Here, we apply the traditional density wave theory and analytically model the radial component of the two-dimensional velocity field. Provided that the radial velocity gradient is caused by relatively long-lived spiral arms that can affect stars substantially above the plane, this analytic model provides new independent estimates for the parameters of the Milky Way spiral structure. Our analysis favours a two-armed perturbation with the Sun close to the inner ultra-harmonic 4:1 resonance, with a pattern speed \Omega_p=18.6^{+0.3}_{-0.2} km/s/kpc and a small amplitude A=0.55 \pm 0.02% of the background potential (14% of the background density). This model can serve as a basis for numerical simulations in three dimensions, additionally including a possible influence of the galactic bar and/or other non-axisymmetric modes.

The 4MOST consortium is currently halfway through a Conceptual Design study for ESO with the aim to develop a wide-field (>3 square degree, goal >5 square degree), high-multiplex (>1500 fibres, goal 3000 fibres) spectroscopic survey facility for an ESO 4m-class telescope (VISTA). 4MOST will run permanently on the telescope to perform a 5 year public survey yielding more than 20 million spectra at resolution R~5000 ({\lambda}=390-1000 nm) and more than 2 million spectra at R~20,000 (395-456.5 nm & 587-673 nm). The 4MOST design is especially intended to complement three key all-sky, space-based observatories of prime European interest: Gaia, eROSITA and Euclid. Initial design and performance estimates for the wide-field corrector concepts are presented. We consider two fibre positioner concepts, a well-known Phi-Theta system and a new R-Theta concept with a large patrol area. The spectrographs are fixed configuration two-arm spectrographs, with dedicated spectrographs for the high- and low-resolution. A full facility simulator is being developed to guide trade-off decisions regarding the optimal field-of-view, number of fibres needed, and the relative fraction of high-to-low resolution fibres. Mock catalogues with template spectra from seven Design Reference Surveys are simulated to verify the science requirements of 4MOST. The 4MOST consortium aims to deliver the full 4MOST facility by the end of 2018 and start delivering high-level data products for both consortium and ESO community targets a year later with yearly increments.

The RAdial Velocity Experiment (RAVE) is a medium resolution R~7500 spectroscopic survey of the Milky Way which already obtained over half a million stellar spectra. They present a randomly selected magnitude-limited sample, so it is important to use a reliable and automated classification scheme which identifies normal single stars and discovers different types of peculiar stars. To this end we present a morphological classification of 350,000 RAVE survey stellar spectra using locally linear embedding, a dimensionality reduction method which enables representing the complex spectral morphology in a low dimensional projected space while still preserving the properties of the local neighborhoods of spectra. We find that the majority of all spectra in the database ~90-95% belong to normal single stars, but there is also a significant population of several types of peculiars. Among them the most populated groups are those of various types of spectroscopic binary and chromospherically active stars. Both of them include several thousands of spectra. Particularly the latter group offers significant further investigation opportunities since activity of stars is a known proxy of stellar ages. Applying the same classification procedure to the sample of normal single stars alone shows that the shape of the projected manifold in two dimensional space correlates with stellar temperature, surface gravity and metallicity.

We present chemical elemental abundances for $36,561$ stars observed by the RAdial Velocity Experiment (RAVE), an ambitious spectroscopic survey of our Galaxy at Galactic latitudes $|$b$|>25^{\circ}$ and with magnitudes in the range 9$<I_{DENIS}<$13. RAVE spectra cover the Ca-triplet region at 8410--8795\AA\ with resolving power R$\sim$7500. This first data release of the RAVE chemical catalogue is complementary to the third RAVE data release of radial velocities and stellar parameters, and it contains chemical abundances for the elements Mg, Al, Si, Ca, Ti, Fe and Ni, with a mean error of $\sim$0.2 dex, as judged from accuracy tests performed on synthetic and real spectra. Abundances are estimated through a dedicated processing pipeline in which the curve of growth of individual lines is obtained from a library of absorption-line equivalent widths to construct a model spectrum that is then matched to the observed spectrum via a $\chi^2$-minimization technique. We plan to extend this pipeline to include estimates for other elements, such as oxygen and sulfur, in future data releases.

We present the third data release of the RAdial Velocity Experiment (RAVE) which is the first milestone of the RAVE project, releasing the full pilot survey. The catalog contains 83,072 radial velocity measurements for 77,461 stars in the southern celestial hemisphere, as well as stellar parameters for 39,833 stars. This paper describes the content of the new release, the new processing pipeline, as well as an updated calibration for the metallicity based upon the observation of additional standard stars. Spectra will be made available in a future release. The data release can be accessed via the RAVE webpage: http://www.rave-survey.org.

The RAdial Velocity Experiment (RAVE) is a spectroscopic survey of the Milky Way. We use the subsample of spectra with spectroscopically determined values of stellar parameters to determine the distances to these stars. The list currently contains 235,064 high quality spectra which show no peculiarities and belong to 210,872 different stars. The numbers will grow as the RAVE survey progresses. The public version of the catalog will be made available through the CDS services along with the ongoing RAVE public data releases. The distances are determined with a method based on the work by Breddels et al.~(2010). Here we assume that the star undergoes a standard stellar evolution and that its spectrum shows no peculiarities. The refinements include: the use of either of the three isochrone sets, a better account of the stellar ages and masses, use of more realistic errors of stellar parameter values, and application to a larger dataset. The derived distances of both dwarfs and giants match within ~21% to the astrometric distances of Hipparcos stars and to the distances of observed members of open and globular clusters. Multiple observations of a fraction of RAVE stars show that repeatability of the derived distances is even better, with half of the objects showing a distance scatter of \simlt 11%. RAVE dwarfs are ~300 pc from the Sun, and giants are at distances of 1 to 2 kpc, and up to 10 kpc. This places the RAVE dataset between the more local Geneva-Copenhagen survey and the more distant and fainter SDSS sample. As such it is ideal to address some of the fundamental questions of Galactic structure and evolution in the pre-Gaia era. Individual applications are left to separate papers, here we show that the full 6-dimensional information on position and velocity is accurate enough to discuss the vertical structure and kinematic properties of the thin and thick disks.

We devise a new method for the detection of double-lined binary stars in a sample of the Radial Velocity Experiment (RAVE) survey spectra. The method is both tested against extensive simulations based on synthetic spectra, and compared to direct visual inspection of all RAVE spectra. It is based on the properties and shape of the cross-correlation function, and is able to recover ~80% of all binaries with an orbital period of order 1 day. Systems with periods up to 1 year are still within the detection reach. We have applied the method to 25,850 spectra of the RAVE second data release and found 123 double-lined binary candidates, only eight of which are already marked as binaries in the SIMBAD database. Among the candidates, there are seven that show spectral features consistent with the RS CVn type (solar type with active chromosphere) and seven that might be of W UMa type (over-contact binaries). One star, HD 101167, seems to be a triple system composed of three nearly identical G-type dwarfs. The tested classification method could also be applicable to the data of the upcoming Gaia mission.

(Abridged) Aims:We develop a method for deriving distances from spectroscopic data and obtaining full 6D phase-space coordinates for the RAVE survey's second data release. Methods: We used stellar models combined with atmospheric properties from RAVE (Teff, logg and [Fe/H]) and (J-Ks) photometry from archival sources to derive absolute magnitudes. We are able to derive the full 6D phase-space coordinates for a large sample of RAVE stars. This method is tested with artificial data, Hipparcos trigonometric parallaxes and observations of the open cluster M67. Results: When we applied our method to a set of 16 146 stars, we found that 25% (4 037) of the stars have relative (statistical) distance errors of < 35%, while 50% (8 073) and 75% (12 110) have relative (statistical) errors smaller than 45% and 50%, respectively. Our various tests show that we can reliably estimate distances for main-sequence stars, but there is an indication of potential systematic problems with giant stars. For the main-sequence star sample (defined as those with log(g) > 4), 25% (1 744) have relative distance errors < 31%, while 50% (3 488) and 75% (5 231) have relative errors smaller than 36% and 42%, respectively. Our full dataset shows the expected decrease in the metallicity of stars as a function of distance from the Galactic plane. The known kinematic substructures in the U and V velocity components of nearby dwarf stars are apparent in our dataset, confirming the accuracy of our data and the reliability of our technique. We provide independent measurements of the orientation of the UV velocity ellipsoid and of the solar motion, and they are in very good agreement with previous work. Conclusions: The distance catalogue for the RAVE second data release is available at http://www.astro.rug.nl/~rave

We present the second data release of the Radial Velocity Experiment (RAVE), an ambitious spectroscopic survey to measure radial velocities (RVs) and stellar atmosphere parameters of up to one million stars using the 6dF multi-object spectrograph on the 1.2-m UK Schmidt Telescope of the Anglo-Australian Observatory (AAO). It is obtaining medium resolution spectra (median R=7,500) in the Ca-triplet region (8,410--8,795 \AA) for southern hemisphere stars in the magnitude range 9<I<12. Following the first data release (Steinmetz et al. 2006) the current release doubles the sample of published RVs, now containing 51,829 RVs for 49,327 individual stars observed on 141 nights between April 11 2003 and March 31 2005. Comparison with external data sets shows that the new data collected since April 3 2004 show a standard deviation of 1.3 km/s, about twice better than for the first data release. For the first time this data release contains values of stellar parameters from 22,407 spectra of 21,121 individual stars. They were derived by a penalized \chi^2 method using an extensive grid of synthetic spectra calculated from the latest version of Kurucz models. From comparison with external data sets, our conservative estimates of errors of the stellar parameters (for a spectrum with S/N=40) are 400 K in temperature, 0.5 dex in gravity, and 0.2 dex in metallicity. We note however that the internal errors estimated from repeat RAVE observations of 822 stars are at least a factor 2 smaller. We demonstrate that the results show no systematic offsets if compared to values derived from photometry or complementary spectroscopic analyses. The data release includes proper motion and photometric measurements. It can be accessed via the RAVE webpage: http://www.rave-survey.org and through CDS.

We present the first data release of the Radial Velocity Experiment (RAVE), an ambitious spectroscopic survey to measure radial velocities and stellar atmosphere parameters (temperature, metallicity, surface gravity) of up to one million stars using the 6dF multi-object spectrograph on the 1.2-m UK Schmidt Telescope of the Anglo-Australian Observatory (AAO). The RAVE program started in 2003, obtaining medium resolution spectra (median R=7,500) in the Ca-triplet region ($\lambda\lambda$ 8,410--8,795 \AA) for southern hemisphere stars drawn from the Tycho-2 and SuperCOSMOS catalogs, in the magnitude range 9<I<12. The first data release is described in this paper and contains radial velocities for 24,748 individual stars (25,274 measurements when including re-observations). Those data were obtained on 67 nights between 11 April 2003 to 03 April 2004. The total sky coverage within this data release is $\sim$4,760 square degrees. The average signal to noise ratio of the observed spectra is 29.5, and 80% of the radial velocities have uncertainties better than 3.4 km/s. Combining internal errors and zero-point errors, the mode is found to be 2 km/s. Repeat observations are used to assess the stability of our radial velocity solution, resulting in a variance of 2.8 km/s. We demonstrate that the radial velocities derived for the first data set do not show any systematic trend with color or signal to noise. The RAVE radial velocities are complemented in the data release with proper motions from Starnet 2.0, Tycho-2 and SuperCOSMOS, in addition to photometric data from the major optical and infrared catalogs (Tycho-2, USNO-B, DENIS and 2MASS). The data release can be accessed via the RAVE webpage: http://www.rave-survey.org.

Between 1996 and 2003 we have obtained 226 high resolution spectra of 16 stars in the field of the young open cluster NGC 6913, to the aim of constraining its main properties and study its internal kinematics. Twelve of the program stars turned out to be members, one of them probably unbound. Nine are binaries (one eclipsing and another double lined) and for seven of them the observations allowed to derive the orbital elements. All but two of the nine discovered binaries are cluster members. In spite of the young age (a few Myr), the cluster already shows signs that could be interpreted as evidence of dynamical relaxation and mass segregation. However, they may be also the result of an unconventional formation scenario. The dynamical (virial) mass as estimated from the radial velocity dispersion is larger than the cluster luminous mass, which may be explained by a combination of the optically thick interstellar cloud that occults part of the cluster, the unbound state or undetected very wide binary orbit of some of the members that inflate the velocity dispersion and a high inclination for the axis of a possible cluster angular momentum. All discovered binaries are hard enough to survive average close encounters within the cluster and do not yet show sign of relaxation of the orbital elements to values typical of field binaries.

The orbits and physical parameters of three detached F and G-type eclipsing binaries have been derived combining Hipparcos H(P) photometry with 8480-8740 Ang ground-based spectroscopy, simulating the photometric+spectroscopic observations that the GAIA mission will obtain. Tycho B(T) and V(T) light curves are too noisy to be modeled for the three targets, and only mean Tycho colors are retained to constrain the temperature. No previous combined photometric+spectroscopic solution exists in literature for any of the three targets. Quite remarkably, CN Lyn turned out to be an equal masses F5 triple system. Distances from the orbital solutions agree within the astrometric error with the Hipparcos parallaxes.

A photometric, astrometric and spectroscopic investigation of the poorly studied open cluster NGC 6738 has been performed in order to ascertain its real nature. NGC 6738 is definitely not a physical stellar ensemble: photometry does not show a defined mean sequence, proper motions and radial velocities are randomly distributed, spectro-photometric parallaxes range between 10 and 1600 pc, and the apparent luminosity function is identical to that of the surrounding field. NGC 6738 therefore appears to be an apparent concentration of a few bright stars projected on patchy background absorption.