The impulsive noise in astronomical images originates from various sources. It develops as a result of thermal generation in pixels, collision of cosmic rays with image sensor or may be induced by high readout voltage in Electron Multiplying CCD (EMCCD). It is usually efficiently removed by employing the dark frames or by averaging several exposures. Unfortunately, there are some circumstances, when either the observed objects or positions of impulsive pixels evolve and therefore each obtained image has to be filtered independently. In this article we present an overview of impulsive noise filtering methods and compare their efficiency for the purpose of astronomical image enhancement. The employed set of noise templates consists of dark frames obtained from CCD and EMCCD cameras working on ground and in space. The experiments conducted on synthetic and real images, allowed for drawing numerous conclusions about the usefulness of several filtering methods for various: (1) widths of stellar profiles, (2) signal to noise ratios, (3) noise distributions and (4) applied imaging techniques. The results of presented evaluation are especially valuable for selection of the most efficient filtering schema in astronomical image processing pipelines.

In the paper we present a low cost optical device which splits the light in the focal plane into two separate optical paths and collimates it back into a single image plane, and where a selective information processing ca be carried out. The optical system is straightforward and easy implementable as it consists of only three lens and two mirrors. The system is dedicated for imaging in low-light-level conditions in which widely used optical devices, based on beam-splitters or dichroic mirrors, suffer from light loss. We expose examples of applications of our device, using a prototype model. The proposed optical system may be employed for: monitoring the objects located in different distances from observer (1), creating regions of different magnification within a single image plane (2), high dynamic range photometry (3), or imaging in two wavelength bands simultaneously (4).