The Euclid mission will observe well over a billion galaxies out to $z\sim6$ and beyond. This will offer an unrivalled opportunity to investigate several key questions for understanding galaxy formation and evolution. The first step for many of these studies will be the selection of a sample of quiescent and star-forming galaxies, as is often done in the literature by using well known colour techniques such as the `UVJ' diagram. However, given the limited number of filters available for the Euclid telescope, the recovery of such rest-frame colours will be challenging. We therefore investigate the use of observed Euclid colours, on their own and together with ground-based u-band observations, for selecting quiescent and star-forming galaxies. The most efficient colour combination, among the ones tested in this work, consists of the (u-VIS) and (VIS-J) colours. We find that this combination allows users to select a sample of quiescent galaxies complete to above $\sim70\%$ and with less than 15$\%$ contamination at redshifts in the range $0.75<z<1$. For galaxies at high-z or without the u-band complementary observations, the (VIS-Y) and (J-H) colours represent a valid alternative, with $>65\%$ completeness level and contamination below 20$\%$ at $1<z<2$ for finding quiescent galaxies. In comparison, the sample of quiescent galaxies selected with the traditional UVJ technique is only $\sim20\%$ complete at $z<3$, when recovering the rest-frame colours using mock Euclid observations. This shows that our new methodology is the most suitable one when only Euclid bands, along with u-band imaging, are available.

Stellar masses in future James Webb Space Telescope (JWST) deep blank-fields will be mainly derived fitting the spectral energy distribution with theoretical galaxy templates. We investigate the uncertainties and biases of the stellar masses derived by using the LePhare code for spectral energy distribution fitting and the Yggdrasil theoretical templates. We consider a sample of mock galaxies at z$=$7-10 with mock JWST observations with S/N$_{F150W}\geqslant$ 10. Our goal is to provide a list of statistical stellar mass corrections to include on the stellar mass derivation for different output galaxy properties and JWST filter combinations to correct for template degeneracies. Median statistical stellar mass corrections vary from -0.83 dex to 0.87 dex, while 25$\%$ (75$\%$) quartiles range from -0.83 dex (-0.67 dex) to 0.51 dex (0.88 dex), depending on filter combinations and galaxy models. The most challenging cases are galaxies with nebular emission lines, especially the ones that are wrongly identified as galaxies without, relative dust-free galaxies and galaxies with small metallicities (i.e. Z$=1/50Z_{\odot}$). The stellar mass estimation of galaxies correctly identified without emission lines is generally fine, except at z$=$10 when considering only the 8 NIRCam bands, which make the MIRI bands very valuable. We have tested our stellar mass corrections using the public JAGUAR galaxy catalogue, deriving that the average discrepancy in the recovered stellar mass distribution decreases by 20-50$\%$ at z$>$7 after the correction. We found that without the stellar-mass corrections the number of low-mass galaxies (M$^{*}<10^{7}M_{\odot}$) is overestimated, which can potentially lead to systematic errors in the calculation of the galaxy stellar mass function faint-end slope at high z.

We report the study of far-IR sizes of submillimeter galaxies (SMGs) in relation to their dust-obscured star formation rate (SFR) and active galactic nuclei (AGN) presence, determined using mid-IR photometry. We determined the millimeter-wave ($\lambda_{\rm obs}=1100 \mu$m) sizes of 69 ALMA-identified SMGs, selected with $\geq10$$\sigma$ confidence on ALMA images ($F_{\rm 1100 \mu m}=1.7$--7.4 mJy). We found that all the SMGs are located above an avoidance region in the millimeter size-flux plane, as expected by the Eddington limit for star formation. In order to understand what drives the different millimeter-wave sizes in SMGs, we investigated the relation between millimeter-wave size and AGN fraction for 25 of our SMGs at $z=1$--3. We found that the SMGs for which the mid-IR emission is dominated by star formation or AGN have extended millimeter-sizes, with respective median $R_{\rm c,e} = 1.6^{+0.34}_{-0.21}$ and 1.5$^{+0.93}_{-0.24}$ kpc. Instead, the SMGs for which the mid-IR emission corresponds to star-forming/AGN composites have more compact millimeter-wave sizes, with median $R_{\rm c,e}=1.0^{+0.20}_{-0.20}$ kpc. The relation between millimeter-wave size and AGN fraction suggests that this size may be related to the evolutionary stage of the SMG. The very compact sizes for composite star-forming/AGN systems could be explained by supermassive black holes growing rapidly during the SMG coalescing, star-formation phase.

The analysis of galaxies on the star formation rate - stellar mass (SFR-M*) plane is a powerful diagnostic for galaxy evolution at different cosmic times. We consider a sample of 24463 galaxies from the CANDELS/GOODS-S survey to conduct a detailed analysis of the SFR-M* relation at redshifts 0.5$\leqslant z<$3 over more than three dex in stellar mass. To obtain SFR estimates, we utilise mid- and far-IR photometry when available, and rest-UV fluxes for all the other galaxies. We perform our analysis in different redshift bins, with two different methods: 1) a linear regression fitting of all star-forming galaxies, defined as those with specific star formation rates $\rm log_{10}(sSFR/yr^{-1}) > -9.8$, similarly to what is typically done in the literature; 2) a multi-Gaussian decomposition to identify the galaxy main sequence (MS), the starburst sequence and the quenched galaxy cloud. We find that the MS slope becomes flatter when higher stellar mass cuts are adopted, and that the apparent slope change observed at high masses depends on the SFR estimation method. In addition, the multi-Gaussian decomposition reveals the presence of a starburst population which increases towards low stellar masses and high redshifts. We find that starbursts make up ~5% of all galaxies at z=0.5-1.0, while they account for ~16% of galaxies at 2$<z<$3 with log$_{10}(M^{*})=$8.25-11.25. We conclude that the dissection of the SFR-M* in multiple components over a wide range of stellar masses is necessary to understand the importance of the different modes of star formation through cosmic time.

We study a large galaxy sample from the Spitzer Matching Survey of the UltraVISTA ultra-deep Stripes (SMUVS) to search for sources with enhanced 3.6 micron fluxes indicative of strong Halpha emission at z=3.9-4.9. We find that the percentage of "Halpha excess" sources reaches 37-40% for galaxies with stellar masses log10(M*/Msun) ~ 9-10, and decreases to <20% at log10(M*/Msun) ~ 10.7. At higher stellar masses, however, the trend reverses, although this is likely due to AGN contamination. We derive star formation rates (SFR) and specific SFR (sSFR) from the inferred Halpha equivalent widths (EW) of our "Halpha excess" galaxies. We show, for the first time, that the "Halpha excess" galaxies clearly have a bimodal distribution on the SFR-M* plane: they lie on the main sequence of star formation (with log10(sSFR/yr^{-1})<-8.05) or in a starburst cloud (with log10(sSFR/yr^{-1}) >-7.60). The latter contains ~15% of all the objects in our sample and accounts for >50% of the cosmic SFR density at z=3.9-4.9, for which we derive a robust lower limit of 0.066 Msun yr^{-1} Mpc^{-3}. Finally, we identify an unusual >50sigma overdensity of z=3.9-4.9 galaxies within a 0.20 x 0.20 sq. arcmin region. We conclude that the SMUVS unique combination of area and depth at mid-IR wavelengths provides an unprecedented level of statistics and dynamic range which are fundamental to reveal new aspects of galaxy evolution in the young Universe.

Imaging with the James Webb Space Telescope (JWST) will allow for observing the bulk of distant galaxies at the epoch of reionisation. The recovery of their properties, such as age, color excess E(B-V), specific star formation rate (sSFR) and stellar mass, will mostly rely on spectral energy distribution fitting, based on the data provided by JWST's two imager cameras, namely the Near Infrared Camera (NIRCam) and the Mid Infrared Imager (MIRI). In this work we analyze the effect of choosing different combinations of NIRCam and MIRI broad-band filters, from 0.6 {\mu}m to 7.7 {\mu}m, on the recovery of these galaxy properties. We performed our tests on a sample of 1542 simulated galaxies, with known input properties, at z=7-10. We found that, with only 8 NIRCam broad-bands, we can recover the galaxy age within 0.1 Gyr and the color excess within 0.06 mag for 70% of the galaxies. Besides, the stellar masses and sSFR are recovered within 0.2 and 0.3 dex, respectively, at z=7-9. Instead, at z=10, no NIRCam band traces purely the {\lambda}> 4000 {\AA} regime and the percentage of outliers in stellar mass (sSFR) increases by > 20% (> 90%), in comparison to z=9. The MIRI F560W and F770W bands are crucial to improve the stellar mass and the sSFR estimation at z=10. When nebular emission lines are present, deriving correct galaxy properties is challenging, at any redshift and with any band combination. In particular, the stellar mass is systematically overestimated in up to 0.3 dex on average with NIRCam data alone and including MIRI observations improves only marginally the estimation.

The determination of galaxy redshifts in James Webb Space Telescope (JWST)'s blank-field surveys will mostly rely on photometric estimates, based on the data provided by JWST's Near-Infrared Camera (NIRCam) at 0.6-5.0 {\mu}m and Mid Infrared Instrument (MIRI) at {\lambda}>5.0 {\mu}m. In this work we analyse the impact of choosing different combinations of NIRCam and MIRI broad-band filters (F070W to F770W), as well as having ancillary data at {\lambda}<0.6 {\mu}m, on the derived photometric redshifts (zphot) of a total of 5921 real and simulated galaxies, with known input redshifts z=0-10. We found that observations at {\lambda}<0.6 {\mu}m are necessary to control the contamination of high-z samples by low-z interlopers. Adding MIRI (F560W and F770W) photometry to the NIRCam data mitigates the absence of ancillary observations at {\lambda}<0.6 {\mu}m and improves the redshift estimation. At z=7-10, accurate zphot can be obtained with the NIRCam broad bands alone when S/N>=10, but the zphot quality significantly degrades at S/N<=5. Adding MIRI photometry with one magnitude brighter depth than the NIRCam depth allows for a redshift recovery of 83-99%, depending on SED type, and its effect is particularly noteworthy for galaxies with nebular emission. The vast majority of NIRCam galaxies with [F150W]=29 AB mag at z=7-10 will be detected with MIRI at [F560W, F770W]<28 mag if these sources are at least mildly evolved or have spectra with emission lines boosting the mid-infrared fluxes.

The main advantage of Microwave Kinetic Inductance Detector arrays (MKID) is their multiplexing capability, which allows for building cameras with a large number of pixels and good sensitivity, particularly suitable to perform large blank galaxy surveys. However, to have as many pixels as possible it is necessary to arrange detectors close in readout frequency. Consequently KIDs overlap in frequency and are coupled to each other producing crosstalk. Because crosstalk can be only minimised by improving the array design, in this work we aim to correct for this effect a posteriori. We analysed a MKID array consisting of 880 KIDs with readout frequencies at 4-8 GHz. We measured the beam patterns for every detector in the array and described the response of each detector by using a two-dimensional Gaussian fit. Then, we identified detectors affected by crosstalk above -30 dB level from the maximum and removed the signal of the crosstalking detectors. Moreover, we modelled the crosstalk level for each KID as a function of the readout frequency separation starting from the assumption that the transmission of a KID is a Lorenztian function in power. We were able to describe the general crosstalk level of the array and the crosstalk of each KID within 5 dB, so enabling the design of future arrays with the crosstalk as a design criterion. In this work, we demonstrate that it is possible to process MKID images a posteriori to decrease the crosstalk effect, subtracting the response of each coupled KID from the original map.

Microwave kinetic inductance detector (MKID) provides a way to build large ground based sub-mm instruments such as NIKA and A-MKID. For such instruments, therefore, it is important to understand and characterize the response to ensure good linearity and calibration over wide dynamic range. We propose to use the MKID readout frequency response to determine the MKID responsivity to an input optical source power. A signal can be measured in a KID as a change in the phase of the readout signal with respect to the KID resonant circle. Fundamentally, this phase change is due to a shift in the KID resonance frequency, in turn due to a radiation induced change in the quasiparticle number in the superconducting resonator. We show that shift in resonant frequency can be determined from the phase shift by using KID phase versus frequency dependence using a previously measured resonant frequency. Working in this calculated resonant frequency, we gain near linearity and constant calibration to a constant optical signal applied in a wide range of operating points on the resonance and readout powers. This calibration method has three particular advantages: first, it is fast enough to be used to calibrate large arrays, with pixel counts in the thousand of pixels; second, it is based on data that are already necessary to determine KID positions; third, it can be done without applying any optical source in front of the array.