Lifting dust and sand into the thin Martian atmosphere is a challenging problem. Atmospheric pressure excursions within dust devils have been proposed to support lifting. We verify this idea in laboratory experiments. Pressure differences up to a few Pa are applied along particle layers of 50 to 400 $\rm \mu m$. As samples we used glass beads of $\sim$50 $\rm \mu m$ diameter and irregular basalt grains of $\sim$20 $\rm \mu m$ in size. The total ambient pressure of air was set to 600 Pa. Particles are ejected at pressure differences as low as 2.0 $\rm \pm$ 0.8 Pa. In the case of glass beads, the ejected grains returning to the particle bed can trigger new particle ejections as they reduce cohesion and release the tension from other grains. Therefore, few impacting grains might be sufficient to sustain dust lifting in a dust devil at even lower pressure differences. Particle lift requires a very thin, $\sim$100 $\rm \mu m$, low permeability particle layer on top of supporting ground with larger pore space. Assuming this, our experiments support the idea that pressure excursions in Martian dust devils release grains from the ground.

We developed an experiment to study different aspects of granular matter under microgravity. The 1.5U small experiment was carried out on the International Space Station. About 3500 almost identical spherical glass particles with 856 um diameter were placed in a container of 50*50 mm cross section. Adjusting the height between 5 and 50 mm, the filling factor can be varied. The sample was vibrated under different frequencies and amplitudes. The majority of the data are video images of the particles motion. Here, we first give an overview of the general setup and a first qualitative account of different phenomena observed in about 700 experimental runs. These phenomena include collisional cooling, collective motion via gas-cluster coupling, and the influence of electrostatic forces on particle-particle interactions.