A recently discovered group of nearby co-orbital objects is an attractive location for extraterrestrial intelligence (ETI) to locate a probe to observe Earth while not being easily seen. These near-Earth objects provide an ideal way to watch our world from a secure natural object. That provides resources an ETI might need: materials, a firm anchor, concealment. These have been little studied by astronomy and not at all by SETI or planetary radar observations. I describe these objects found thus far and propose both passive and active observations of them as possible sites for ET probes.

The most observable leakage radiation from an advanced civilization may well be from the use of power beaming to transfer energy and accelerate spacecraft. Applications suggested for power beaming involve launching spacecraft to orbit, raising satellites to a higher orbit, and interplanetary concepts involving space-to-space transfers of cargo or passengers. We also quantify beam-driven launch to the outer solar system, interstellar precursors and ultimately starships. We estimate the principal observable parameters of power beaming leakage. Extraterrestrial civilizations would know their power beams could be observed, and so could put a message on the power beam and broadcast it for our receipt at little additional energy or cost. By observing leakage from power beams we may find a message embedded on the beam. Recent observations of the anomalous star KIC8462852 by the Allen Telescope Array set some limits on extraterrestrial power beaming in that system. We show that most power beaming applications commensurate with those suggested for our solar system would be detectable if using the frequency range monitored by the ATA, and so the lack of detection is a meaningful, if modest, constraint on extraterrestrial power beaming in that system. Until more extensive observations are made, the limited observation time and frequency coverage are not sufficiently broad in frequency and duration to produce firm conclusions. Such beams would be visible over large interstellar distances. This implies a new approach to the SETI search: Instead of focusing on narrowband beacon transmissions generated by another civilization, look for more powerful beams with much wider bandwidth. This requires a new approach for their discovery by telescopes on Earth. Further studies of power beaming applications should be done, which could broaden the parameter space of observable features we have discussed here.

The vast collecting area of the Square Kilometre Array (SKA), harnessed by sensitive receivers, flexible digital electronics and increased computational capacity, could permit the most sensitive and exhaustive search for technologically-produced radio emission from advanced extraterrestrial intelligence (SETI) ever performed. For example, SKA1-MID will be capable of detecting a source roughly analogous to terrestrial high-power radars (e.g. air route surveillance or ballistic missile warning radars, EIRP (EIRP = equivalent isotropic radiated power, ~10^17 erg sec^-1) at 10 pc in less than 15 minutes, and with a modest four beam SETI observing system could, in one minute, search every star in the primary beam out to ~100 pc for radio emission comparable to that emitted by the Arecibo Planetary Radar (EIRP ~2 x 10^20 erg sec^-1). The flexibility of the signal detection systems used for SETI searches with the SKA will allow new algorithms to be employed that will provide sensitivity to a much wider variety of signal types than previously searched for. Here we discuss the astrobiological and astrophysical motivations for radio SETI and describe how the technical capabilities of the SKA will explore the radio SETI parameter space. We detail several conceivable SETI experimental programs on all components of SKA1, including commensal, primary-user, targeted and survey programs and project the enhancements to them possible with SKA2. We also discuss target selection criteria for these programs, and in the case of commensal observing, how the varied use cases of other primary observers can be used to full advantage for SETI.

Microwave propelled sails are a new class of spacecraft using photon acceleration. It is the only method of interstellar flight that has no physics issues. Laboratory demonstrations of basic features of beam-driven propulsion, flight, stability ('beam-riding'), and induced spin, have been completed in the last decade, primarily in the microwave. It offers much lower cost probes after a substantial investment in the launcher. Engineering issues are being addressed by other applications: fusion (microwave, millimeter and laser sources) and astronomy (large aperture antennas). There are many candidate sail materials: carbon nanotubes and microtrusses, graphene, beryllium, etc. For acceleration of a sail, what is the cost-optimum high power system? Here the cost is used to constrain design parameters to estimate system power, aperture and elements of capital and operating cost. From general relations for cost-optimal transmitter aperture and power, system cost scales with kinetic energy and inversely with sail diameter and frequency. So optimal sails will be larger, lower in mass and driven by higher frequency beams. Estimated costs include economies of scale. We present several starship point concepts. Systems based on microwave, millimeter wave and laser technologies are of equal cost at today's costs. The frequency advantage of lasers is cancelled by the high cost of both the laser and the radiating optic.

We advocate international consultations on societal and technical issues to address the risk problem, and a moratorium on future METI transmissions until such issues are resolved. Instead, we recommend continuing to conduct SETI by listening, with no innate risk, while using powerful new search systems to give a better total probability of detection of beacons and messages than METI for the same cost, and with no need for a long obligatory wait for a response. Realistically, beacons are costly. In light of recent work on the economics of contact by radio, we offer alternatives to the current standard of SETI searches. Historical leakage from Earth has been undetectable as messages for credible receiver systems. Transmissions ('messages') to date are faint and very unlikely to be detected, even by very nearby stars. Future space microwave and laser power systems will likely be more visible.

How would observers differentiate Beacons from pulsars or other exotic sources, in light of likely Beacon observables? Bandwidth, pulse width and frequency may be distinguishing features. Such transients could be evidence of civilizations slightly higher than ourselves on the Kardashev scale.

What would SETI Beacon transmitters be like if built by civilizations with a variety of motivations, but who cared about cost? We studied in a companion paper how, for fixed power density in the far field, we could build a cost-optimum interstellar Beacon system. Here we consider, if someone like us were to produce a Beacon, how should we look for it? High-power transmitters might be built for wide variety of motives other than twoway communication; Beacons built to be seen over thousands of light years are such. Altruistic Beacon builders will have to contend with other altruistic causes, just as humans do, so may select for economy of effort. Cost, spectral lines near 1 GHz and interstellar scintillation favor radiating frequencies substantially above the classic water hole. Therefore the transmission strategy for a distant, cost-conscious Beacon will be a rapid scan of the galactic plane, to cover the angular space. Such pulses will be infrequent events for the receiver. Such Beacons built by distant advanced, wealthy societies will have very different characteristics from what SETI researchers seek. Future searches should pay special attention to areas along the galactic disk where SETI searches have seen coherent signals that have not recurred on the limited listening time intervals we have used. We will need to wait for recurring events that may arrive in intermittent bursts. Several new SETI search strategies emerge from these ideas. We propose a new test for SETI Beacons, based on the Life Plane hypotheses.

This paper considers galactic scale Beacons from the point of view of expense to a builder on Earth. For fixed power density in the far field, what is the cost-optimum interstellar Beacon system? Experience shows an optimum tradeoff, depending on transmission frequency and on antenna size and power. This emerges by minimizing the cost of producing a desired effective isotropic radiated power, which in turn determines the maximum range of detectability of a transmitted signal. We derive general relations for cost-optimal aperture and power. For linear dependence of capital cost on transmitter power and antenna area, minimum capital cost occurs when the cost is equally divided between antenna gain and radiated power. For non-linear power law dependence a similar simple division occurs. This is validated in cost data for many systems; industry uses this cost optimum as a rule-of-thumb. Costs of pulsed cost-efficient transmitters are estimated from these relations using current cost parameters ($/W, $/m2) as a basis. Galactic-scale Beacons demand effective isotropic radiated power >1017 W, emitted powers are >1 GW, with antenna areas > km2. We show the scaling and give examples of such Beacons. Thrifty beacon systems would be large and costly, have narrow searchlight beams and short dwell times when the Beacon would be seen by an alien oberver at target areas in the sky. They may revisit an area infrequently and will likely transmit at higher microwave frequencies, ~10 GHz. The natural corridor to broadcast is along the galactic spiral radius or along the spiral galactic arm we are in. Our second paper argues that nearly all SETI searches to date had little chance of seeing such Beacons.