This paper presents how photonics associated with new arising detection technologies is able to provide fully integrated instrument for coherent beam combination applied to astrophysical interferometry. The feasibility and operation of on-chip coherent beam combiners has been already demonstrated using various interferometric combination schemes. More recently we proposed a new detection principle aimed at directly sampling and extracting the spectral information of an input signal together with its flux level measurement. The so-called SWIFTS demonstrated concept that stands for Stationary-Wave Integrated Fourier Transform Spectrometer, provides full spectral and spatial information recorded simultaneously thanks to a motionless detecting device. Due to some newly available detection principles considered for the implementation of the SWIFTS concept, some technologies can even provide photo-counting operation that brought a significant extension of the interferometry domain of investigation in astrophysics . The proposed concept is applicable to most of the interferometric instrumental modes including fringe tracking, fast and sensitive detection, Fourier spectral reconstruction and also to manage a large number of incoming beams. The paper presents three practical implementations, two dealing with pair-wise integrated optics beam combinations and the third one with an all-in-one 8 beam combination. In all cases the principles turned into a pair wise baseline coding after proper data processing.

We report first white-light interferograms obtained with an integrated optics beam combiner on a glass plate. These results demonstrate the feasability of single-mode interferometric beam combination with integrated optics technology presented and discussed in paper I. The demonstration is achieved in laboratory with off-the-shelves components coming from micro-sensor applications, not optimized for astronomical use. These two-telescope beam combiners made by ion exchange technique on glass substrate provide laboratory white-light interferograms simultaneously with photometric calibration. A dedicated interferometric workbench using optical fibers is set up to characterize these devices. Despite the rather low match of the component parameters to astronomical constraints, we obtain stable contrasts higher than 93% with a 1.54-\micron laser source and up to 78% with a white-light source in the astronomical H band. Global throughput of 27% for a potassium ion exchange beam combiner and of 43% for a silver one are reached. This work validates our approach for combining several stellar beams of a long baseline interferometer with integrated optics components.