Coronal Mass Ejections (CMEs) often show different features in different band-passes. By combining data in white-light (WL) and ultraviolet (UV) bands, we have applied different techniques to derive plasma temperatures, electron density, internal radial speed, etc, within a fast CME. They serve as extensive tests of the diagnostic capabilities, developed for the observations provided by future multi-channel coronagraphs (such as Solar Orbiter/Metis, ASO-S/LST, PROBA-3/ASPIICS). The involved data include WL images acquired by SOHO/LASCO coronagraphs, and intensities measured by SOHO/UVCS at 2.45 R$_{\odot}$ in the UV (H I Ly$\alpha$ and O VI 1032 {AA} lines) and WL channels. Data from the UVCS WL channel have been employed for the first time to measure the CME position angle with polarization-ratio technique. Plasma electron and effective temperatures of the CME core and void are estimated by combining UV and WL data. Due to the CME expansion and the possible existence of prominence segments, the transit of the CME core results in decreases of the electron temperature down to $10^{5}$ K. The front is observed as a significant dimming in the Ly$\alpha$ intensity, associated with a line broadening due to plasma heating and flows along the line-of-sight. The 2D distribution of plasma speeds within the CME body is reconstructed from LASCO images and employed to constrain the Doppler dimming of Ly$\alpha$ line, and simulate future CME observations by Metis and LST.

A new generation of coronagraphs to study the solar wind and CMEs are being developed and launched. These coronagraphs will heavily rely on multi-channel observations where visible light (VL) and UV-EUV observations provide new plasma diagnostics. One of these instruments, Metis on board ESA-Solar Orbiter, will simultaneously observe VL and the UV Lyman-$\alpha$ line. The number of neutral Hydrogen atoms (a small fraction of coronal protons) is a key parameter for deriving plasma properties such as temperature from the observed Lyman-$\alpha$ line intensity. However, these measurements are significantly affected if non-equilibrium ionisation effects occur. The aim of this work is to determine if non-equilibrium ionisation effects are relevant in CMEs and in particular when and in which regions of the CME. We use a magneto-hydrodynamic simulation of a magnetic flux rope ejection to generate a CME. From this we then reconstruct the ionisation state of Hydrogen atoms in the CME by evaluating both the advection of neutral and ionised Hydrogen atoms and the ionisation and recombination rates in the MHD simulation. We find that the equilibrium ionisation assumption holds mostly in the core of the CME. In contrast non-equilibrium ionisation effects are significant at the CME front, where we find about 100 times more neutral Hydrogen atoms than prescribed by ionisation equilibrium conditions, even if this neutral Hydrogen excess might be difficult to identify due to projection effects. This work provides key information for the development of a new generation of diagnostic techniques that aim at combining visible light and Lyman-$\alpha$ line emissions. The results show that non-ionisation equilibrium effects need to be considered when we analyse CME fronts. To incorrectly assume equilibrium ionisation in these regions would lead to a systematic underestimate of plasma temperatures.

Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-{\alpha} line at 121.6 nm. The coronal images in both the UV Lyman-{\alpha} and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.

The determination of the speed of Coronal Mass Ejections (CMEs) is usually done by tracking brighter features (such as the CME front and core) in visible light coronagraphic images and by deriving unidimensional profiles of the CME speed as a function of altitude or time. Nevertheless, CMEs are usually characterized by the presence of significant density inhomogeneities propagating outward with different radial and latitudinal projected speeds, resulting in a complex evolution eventually forming the Interplanetary CME. In this work, we demonstrate for the first time how coronagraphic image sequences can be analyzed with cross-correlation technique to derive 2D maps of the almost instantaneous plasma speed distribution within the body of CMEs. The technique is first tested with the analysis of synthetic data, and then applied to real observations. Results from this work allow to characterize the distribution and time evolution of kinetic energy inside CMEs, as well as the mechanical energy (combined with the kinetic and potential energy) partition between the core and front of the CME. In the future, CMEs will be observed by two channels (VL and UV Ly-$\alpha$) coronagraphs, such as Metis on-board ESA Solar Orbiter mission as well as Ly-$\alpha$ Solar Telescope (LST) on-board Chinese Advanced Space-based Solar Observatory (ASO-S) mission. Our results will help the analysis of these future observations, helping in particular to take into account the 2D distribution of Ly-$\alpha$ Doppler dimming effect.

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

On 2014 October 30, a band-splitted type II radio burst associated with a coronal mass ejection (CME) observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamic Observatory (SDO) occurred over the southeast limb of the Sun. The fast expansion in all directions of the plasma front acted as a piston and drove a spherical fast shock ahead of it, whose outward progression was traced by simultaneous images obtained with the Nan\c{c}ay Radioheliograph (NRH). The geometry of the CME/shock event was recovered through 3D modeling, given the absence of concomitant stereoscopic observations, and assuming that the band-splitted type II burst was emitted at the intersection of the shock surface with two adjacent low-Alfven speed coronal streamers. From the derived spatiotemporal evolution of the standoff distance between shock and CME leading edge, we were finally able to infer the magnetic field strength $B$ in the inner corona. A simple radial profile of the form $B(r) = (12.6 \pm 2.5) r^{-4}$ nicely fits our results, together with previous estimates, in the range $r = 1.1-2.0$ solar radii.

We determine an optimal width and shape of the narrow-band filter centered around the He\,{\sc i} D$_{3}$ line for prominence and coronal mass ejection (CME) observations with the ASPIICS ({\it Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun}) coronagraph onboard the PROBA-3 ({\it Project for On-board Autonomy}) satellite, to be launched in 2020. We analyze He\,{\sc i} D$_{3}$ line intensities for three representative non-LTE prominence models at temperatures 8, 30 and 100~kK computed by the radiative transfer code and the prominence visible-light (VL) emission due to Thomson scattering on the prominence electrons. We compute various useful relations at prominence line-of-sight (LOS) velocities of 0, 100, and 300~km~s$^{-1}$ for 20~\AA~wide flat filter and three Gaussian filters with full width at half maximum (FWHM) equal to 5, 10, and 20~\AA~to show the relative brightness contribution of the He\,{\sc i} D$_{3}$ line and the prominence VL to the visibility in a given narrow-band filter. We also discuss possible signal contamination by Na\,{\sc i} D$_{1}$ and D$_{2}$ lines which otherwise may be useful to detect comets. Results mainly show: i) an optimal narrow-band filter should be flat or somewhere between flat and Gaussian with FWHM of 20~\AA~in order to detect fast moving prominence structures, ii) the maximum emission in the He\,{\sc i} D$_3$ line is at 30~kK and the minimal at 100~kK, and iii) the ratio of emission in the He\,{\sc i} D$_3$ line to the VL emission can provide a useful diagnostic for the temperature of prominence structures. This ratio is up to 10 for hot prominence structures, up to 100 for cool structures and up to 1000 for warm structures.

This work deals with the study of an erupting prominence embedded in the core of a CME and focuses on the derivation of the prominence plasma filling factor. We explore two methods to measure the prominence plasma filling factor that are based on the combination of visible-light and ultraviolet spectroscopic observations. Theoretical relationships for resonant scattering and collisional excitation are used to evaluate the intensity of the H I Lyman-{\alpha} and Lyman-{\beta} lines, in two prominence points where simultaneous and cospatial LASCO-C2 and UVCS data were available. Thermodynamic and geometrical parameters assumed for the calculation are provided by both observations and the results of a detailed 1D non-LTE radiative-transfer model of the prominence, developed in our previous work (Heinzel 2016). The filling factor is derived from the comparison between the calculated and the measured intensities of the two lines. The results are then checked against the non-LTE model in order to verify the reliability of the methods. The resulting filling factors are consistent with the model in both the prominence points when the separation of the radiative and collisional components of the total intensity, required to estimate the filling factor, is performed using both the line intensities. An exploration of the parameter space shows that the results are weakly sensitive to the plasma velocity, but they depends more strongly on the assumed kinetic temperatures. The combination of visible-light and ultraviolet Lyman-{\alpha} and Lyman-{\beta} data can be used to approximately estimate the geometrical filling factor in erupting prominences, but the proposed techniques are reliable only for emission that is optically thin in the lines considered, condition that is not in general representative of prominence plasma.

Remote sensors on spacecrafts acquire huge volumes of data that can be processed for other purposes in addition to those they were designed for. The project TECSEL2 was born for the usage of the Gaia AIM/AVU daily pipeline output and solar events data to characterize the response of detectors subjected to strong radiation damage within an environment not protected by the terrestrial magnetic field, the Lagrangian point L2, where Gaia operates. The project also aims at identifying anomalies in the scientific output parameters and relate them to detectors malfunctioning due to radiation damage issues correlating with solar events occurred in the same time range. TECSEL2 actually designs and implements a system based on big data technologies which are the state of art in the fields of data processing and data storage. The final goal of TECSEL2 is not only related to the Gaia project, because it provides useful analysis techniques for generic and potentially huge time series datasets.

Visible-light observations of Coronal Mass Ejections (CMEs) performed with coronagraphs and heliospheric imagers (in primis on board the SOHO and STEREO missions) have offered so far the best way to study the kinematics and geometrical structure of these fundamental events. Nevertheless, it has been widely demonstrated that only combination of multi-wavelength data (including X-ray spectra, EUV images, EUV-UV spectra, and radio dynamic spectra) can provide complete information on the plasma temperature and density distributions, non-thermal motions, magnetic fields, and other physical parameters, for both CMEs and CME-related phenomena. In this work, we analyze three CMEs by combining simultaneous data acquired in the polarized visible light by the LASCO-C2 coronagraph and in the UV H I Lyman-$\alpha$ line (1216 \AA) by the UVCS spectrometer, in order to estimate the CME plasma electron density (using the polarization-ratio technique to infer the 3D structure of the CME) and temperature (from the comparison between the expected and measured Lyman-$\alpha$ intensities) along the UVCS field of view. This analysis is primarily aimed at testing the diagnostic methods that will be applied to coronagraphic observations of CMEs delivered by the Metis instrument on board the next ESA-Solar Orbiter mission. We find that CME cores are usually associated with cooler plasma ($T \sim 10^6$ K), and that a significant increase of the electron temperatures is observed from the core to the front of the CME (where $T > 10^{6.3}$ K), which seems to be correlated, in all cases, with the morphological structure of the CME as derived from visible-light images.

Recent works demonstrated that remote sensing observations of shock waves propagating into the corona and associated with major solar eruptions can be used to derive the strength of coronal magnetic fields met by the shock over a very large interval of heliocentric distances and latitudes. This opinion article will summarize most recent results obtained on this topic and will discuss the weaknesses and strengths of these techniques to open a constructive discussion with the scientific community.

We report here on the determination of plasma physical parameters across a shock driven by a Coronal Mass Ejection using White Light (WL) coronagraphic images and Radio Dynamic Spectra (RDS). The event analyzed here is the spectacular eruption that occurred on June 7th 2011, a fast CME followed by the ejection of columns of chromospheric plasma, part of them falling back to the solar surface, associated with a M2.5 flare and a type-II radio burst. Images acquired by the SOHO/LASCO coronagraphs (C2 and C3) were employed to track the CME-driven shock in the corona between 2-12 R$_\odot$ in an angular interval of about 110$^\circ$. In these intervals we derived 2-Dimensional (2D) maps of electron density, shock velocity and shock compression ratio, and we measured the shock inclination angle with respect to the radial direction. Under plausible assumptions, these quantities were used to infer 2D maps of shock Mach number $M_\text{A}$ and strength of coronal magnetic fields at the shock's heights. We found that in the early phases (2-4 R$_\odot$) the whole shock surface is super-Alfv\'enic, while later on (i.e. higher up) it becomes super-Alfvenic only at the nose. This is in agreement with the location for the source of the observed type-II burst, as inferred from RDS combined with the shock kinematic and coronal densities derived from WL. For the first time, a coronal shock is used to derive a 2D map of the coronal magnetic field strength over a 10 R$_\odot$ altitude and $\sim 110^\circ$ latitude intervals.

Understanding the 3D structure of coronal mass ejections (CMEs) is crucial for understanding the nature and origin of solar eruptions. To derive information on the 3D structure of CMEs from white-light (total and polarized brightness) images, the polarization ratio technique is widely used. The soon-to-be-launched METIS coronagraph on board Solar Orbiter will use this technique to produce new polarimetric images. We determine the accuracy at which the position of the centre of mass, direction and speed of propagation, and the column density of the CME can be determined along the line of sight. We perform a 3D MHD simulation of a flux rope ejection where a CME is produced. From the simulation we (i) synthesize the corresponding METIS white-light (total and polarized brightness) images and (ii) apply the polarization ratio technique to these synthesized images and compare the results with the known density distribution from the MHD simulation. We find that the polarization ratio technique reproduces with high accuracy the position of the centre of mass along the line of sight. However, some errors are inherently associated with this determination. The polarization ratio technique also allows information to be derived on the real 3D direction of propagation of the CME. In addition, we find that the column density derived from white-light images is accurate and we propose an improved technique where the combined use of the polarization ratio technique and white-light images minimizes the error in the estimation of column densities. Our method allows us to thoroughly test the performance of the polarization ratio technique and allows a determination of the errors associated with it, which means that it can be used to quantify the results from the analysis of the forthcoming METIS observations in white light (total and polarized brightness).

The target of this work is to investigate the physical nature of polar jets in the solar corona and their possible contribution to coronal heating and solar wind flow based on the analysis of X-ray images acquired by the Hinode XRT telescope. We estimate the different forms of energy associated with many of these small-scale eruptions, in particular the kinetic energy and enthalpy. Two Hinode XRT campaign datasets focusing on the two polar coronal holes were selected to analyze the physical properties of coronal jets; the analyzed data were acquired using a series of three XRT filters. Typical kinematical properties (e.g., length, thickness, lifetime, ejection rate, and velocity) of 18 jets are evaluated from the observed sequences, thus providing information on their possible contribution to the fast solar wind flux escaping from coronal holes. Electron temperatures and densities of polar-jet plasmas are also estimated using ratios of the intensities observed in different filters. We find that the largest amount of energy eventually provided to the corona is thermal. The energy due to waves may also be significant, but its value is comparatively uncertain. The kinetic energy is lower than thermal energy, while other forms of energy are comparatively low. Lesser and fainter events seem to be hotter, thus the total contribution by polar jets to the coronal heating could have been underestimated so far. The kinetic energy flux is usually around three times smaller than the enthalpy counterpart, implying that this energy is converted into plasma heating more than in plasma acceleration. This result suggests that the majority of polar jets are most likely not escaping from the Sun and that only cooler ejections could possibly have enough kinetic energy to contribute to the total solar wind flow.

This work is aimed at quantifying the uncertainties in the 3D reconstruction of the location of coronal mass ejections (CMEs) obtained with the polarization ratio technique. The method takes advantage of the different distributions along the line of sight (LOS) of total (tB) and polarized (pB) brightnesses to estimate the average location of the emitting plasma. To this end, we assumed two simple electron density distributions along the LOS (a constant density and Gaussian density profiles) for a plasma blob and synthesized the expected tB and pB for different distances $z$ of the blob from the plane of the sky (POS) and different projected altitudes $\rho$. Reconstructed locations of the blob along the LOS were thus compared with the real ones, allowing a precise determination of uncertainties in the method. Independently of the analytical density profile, when the blob is centered at a small distance from the POS (i.e. for limb CMEs) the distance from the POS starts to be significantly overestimated. Polarization ratio technique provides the LOS position of the center of mass of what we call folded density distribution, given by reflecting and summing in front of the POS the fraction of density profile located behind that plane. On the other hand, when the blob is far from the POS, but with very small projected altitudes (i.e. for halo CMEs, $\rho < 1.4$ R$_\odot$), the inferred distance from that plane is significantly underestimated. Better determination of the real blob position along the LOS is given for intermediate locations, and in particular when the blob is centered at an angle of $20^\circ$ from the POS. These result have important consequences not only for future 3D reconstruction of CMEs with polarization ratio technique, but also for the design of future coronagraphs aimed at providing a continuous monitoring of halo-CMEs for space weather prediction purposes.

A three-dimensional (3D) reconstruction of the 2007, May 20 partial-halo Coronal Mass Ejection (CME) has been made using STEREO/EUVI and STEREO/COR1 coronagraphic images. The trajectory and kinematics of the erupting filament have been derived from EUVI image pairs with the "tie-pointing" triangulation technique, while the polarization ratio technique has been applied to COR1 data to determine the average position and depth of the CME front along the line of sight. These 3D geometrical information have been combined for the first time with spectroscopic measurements of the OVI $\lambda\lambda$1031.91, 1037.61 \AA\ line profiles made with the Ultraviolet Coronagraph Spectrometer (UVCS) on board SOHO. Comparison between the prominence trajectory extrapolated at the altitude of UVCS observations and the core transit time measured from UVCS data made possible a firm identification of the CME core observed in white light and UV with the prominence plasma expelled during the CME. Results on the 3D structure of the CME front have been used to calculate synthetic spectral profiles of the OVI $\lambda\lambda1031.91$ \AA\ line expected along the UVCS slit, in an attempt to reproduce the measured line widths. Observed line widths can be reproduced within the uncertainties only in the peripheral part of the CME front; at the front center, where the distance of the emitting plasma from the plane of the sky is greater, synthetic widths turn out to be $\sim 25$% lower than the measured ones. This provides strong evidence of line broadening due to plasma heating mechanisms in addition to bulk expansion of the emitting volume.

In this work UV and white light (WL) coronagraphic data are combined to derive the full set of plasma physical parameters along the front of a shock driven by a Coronal Mass Ejection. Pre-shock plasma density, shock compression ratio, speed and inclination angle are estimated from WL data, while pre-shock plasma temperature and outflow velocity are derived from UV data. The Rankine-Hugoniot (RH) equations for the general case of an oblique shock are then applied at three points along the front located between $2.2-2.6$ R$_\odot$ at the shock nose and at the two flanks. Stronger field deflection (by $\sim 46^\circ$), plasma compression (factor $\sim 2.7$) and heating (factor $\sim 12$) occur at the nose, while heating at the flanks is more moderate (factor $1.5-3.0$). Starting from a pre-shock corona where protons and electrons have about the same temperature ($T_p \sim T_e \sim 1.5 \cdot 10^6$ K), temperature increases derived with RH equations could better represent the protons heating (by dissipation across the shock), while the temperature increase implied by adiabatic compression (factor $\sim 2$ at the nose, $\sim 1.2-1.5$ at the flanks) could be more representative of electrons heating: the transit of the shock causes a decoupling between electron and proton temperatures. Derived magnetic field vector rotations imply a draping of field lines around the expanding flux rope. The shock turns out to be super-critical (sub-critical) at the nose (at the flanks), where derived post-shock plasma parameters can be very well approximated with those derived by assuming a parallel (perpendicular) shock.

In this work we study the kinematics of three small-scale (0.01 R$_\odot$) blobs of chromospheric plasma falling back to the Sun after the huge eruptive event of June 7, 2011. From a study of 3-D trajectories of blobs made with the Solar TErrestrial RElations Observatory (STEREO) data, we demonstrate the existence of a significant drag force acting on the blobs and calculate two drag coefficients, in the radial and tangential directions. The resulting drag coefficients $C_D$ are between 0 and 5, comparable in the two directions, making the drag force only a factor of 0.45-0.75 smaller than the gravitational force. To obtain a correct determination of electron densities in the blobs, we also demonstrate how, by combining measurements of total and polarized brightness, the H$\alpha$ contribution to the white-light emission observed by the COR1 telescopes can be estimated. This component is significant for chromospheric plasma, being between 95 and 98 % of the total white-light emission. Moreover, we demonstrate that the COR1 data can be employed even to estimate the H$\alpha$ polarized component, which turns out to be in the order of a few percent of H$\alpha$ total emission from the blobs. If the drag forces acting on small-scale blobs reported here are similar to those that play a role during the CME propagation, our results suggest that the magnetic drag should be considered even in the CME initiation modelling.

High spatial- and temporal-resolution images of coronal hole regions show a dynamical environment where mass flows and jets are frequently observed. These jets are believed to be important for the coronal heating and the acceleration of the fast solar wind. We studied the dynamics of two jets seen in a polar coronal hole with a combination of imaging from EIS and XRT onboard Hinode. We observed drift motions related to the evolution and formation of these small-scale jets, which we tried to model as well. We found observational evidence that supports the idea that polar jets are very likely produced by multiple small-scale reconnections occurring at different times in different locations. These eject plasma blobs that flow up and down with a motion very similar to a simple ballistic motion. The associated drift speed of the first jet is estimated to be $\approx$ 27 km s$^{-1}$. The average outward speed of the first jet is $\approx 171$ km s$^{-1}$, well below the escape speed, hence if simple ballistic motion is considered, the plasma will not escape the Sun. The second jet was observed in the south polar coronal hole with three XRT filters, namely, C$_{-}$poly, Al$_{-}$poly, and Al$_{-}$mesh filters. We observed that the second jet drifted at all altitudes along the jet with the same drift speed of $\simeq$ 7 km s$^{-1}$. The enhancement in the light curves of low-temperature EIS lines in the later phase of the jet lifetime and the shape of the jet's stack plots suggests that the jet material is falls back, and most likely cools down. To support this conclusion, the observed drifts were interpreted within a scenario where reconnection progressively shifts along a magnetic structure, leading to the sequential appearance of jets of about the same size and physical characteristics. On this basis, we also propose a simple qualitative model that mimics the observations.

Off-limb observations of the solar corona after Coronal Mass Ejections (CMEs) often show strong, compact, and persistent UV sources behind the eruption. They are primarily observed by the SOHO/UVCS instrument in the "hot" Fe XVIII {\lambda}974 {\AA} line and are usually interpreted as a signature of plasma heating due to magnetic reconnection in the post-CME Current Sheet (CS). Nevertheless, the physical process itself and the altitude of the main energy release are currently not fully understood. In this work, we studied the evolution of plasma heating after the CME of 2004 July 28 by comparing UV spectra acquired by UVCS with soft X-ray (SXR) and hard X-ray (HXR)images of the post-flare loops taken by GOES/SXI and RHESSI. The X-ray data show a long-lasting extended source that is rising upwards, toward the high-temperature source detected by UVCS. UVCS data show the presence of significant non-thermal broadening in the CS (signature of turbulent motions) and a strong density gradient across the CS region. The thermal energy released in the HXR source is on the order of about 10^32 erg, a factor about 2-5 larger than the energy required to explain the high-temperature plasma sampled by UVCS. Nevertheless, the very different time evolutions of SXR and HXR sources compared to the UV emission suggest that reconnection occurring above the post-eruption arcades are not directly responsible for the high-temperature plasma sampled higher up by UVCS. We conclude that an additional plasma heating mechanism (such as turbulent reconnection) in the CS is likely required.

White-light coronagraphic images of Coronal Mass Ejections (CMEs) observed by SOHO/LASCO C2 have been used to estimate the density jump along the whole front of two CME-driven shocks. The two events are different in that the first one was a "radio-loud" fast CME, while the second one was a "radio quiet" slow CME. From the compression ratios inferred along the shock fronts, we estimated the Alfv\'en Mach numbers for the general case of an oblique shock. It turns out that the "radio-loud" CME shock is initially super-critical around the shock center, while later on the whole shock becomes sub-critical. On the contrary, the shock associated with the "radio-quiet" CME is sub-critical at all times. This suggests that CME-driven shocks could be efficient particle accelerators at the shock nose only at the initiation phases of the event, if and when the shock is super-critical, while at later times they lose their energy and the capability to accelerate high energetic particles.

Shocks driven by Coronal Mass Ejections (CMEs) are primary agents of space weather. They can accelerate particles to high energies and can compress the magnetosphere thus setting in motion geomagnetic storms. For many years, these shocks were studied only in-situ when they crossed over spacecraft or remotely through their radio emission spectra. Neither of these two methods provides information on the spatial structure of the shock nor on its relationship to its driver, the CME. In the last decade, we have been able to not only image shocks with coronagraphs but also measure their properties remotely through the use of spectroscopic and image analysis methods. Thanks to instrumentation on STEREO and SOHO we can now image shocks (and waves) from the low corona, through the inner heliosphere, to Earth. Here, we review the progress made in imaging and analyzing CME-driven shocks and show that joint coronagraphic and spectrscopic observations are our best means to understand shock physics close to the Sun.

The magnetic field plays a pivotal role in many fields of Astrophysics. This is especially true for the physics of the solar atmosphere. Measuring the magnetic field in the upper solar atmosphere is crucial to understand the nature of the underlying physical processes that drive the violent dynamics of the solar corona -- that can also affect life on Earth. SolmeX, a fully equipped solar space observatory for remote-sensing observations, will provide the first comprehensive measurements of the strength and direction of the magnetic field in the upper solar atmosphere. The mission consists of two spacecraft, one carrying the instruments, and another one in formation flight at a distance of about 200m carrying the occulter to provide an artificial total solar eclipse. This will ensure high-quality coronagraphic observations above the solar limb. Solmex integrates two spectro-polarimetric coronagraphs for off-limb observations, one in the EUV and one in the IR, and three instruments for observations on the disk. The latter comprises one imaging polarimeter in the EUV for coronal studies, a spectro-polarimeter in the EUV to investigate the low corona, and an imaging spectro-polarimeter in the UV for chromospheric studies. SOHO and other existing missions have investigated the emission of the upper atmosphere in detail (not considering polarization), and as this will be the case also for missions planned for the near future. Therefore it is timely that SolmeX provides the final piece of the observational quest by measuring the magnetic field in the upper atmosphere through polarimetric observations.

In this work, we focus on the analysis of a CME-driven shock observed by SOHO/LASCO. We show that white-light coronagraphic images can be employed to estimate the compression ratio X = rho_d / rho_u all along the front of CME-driven shocks. X increases from the shock flanks (where X ~ 1.2) to the shock center (where X ~ 3.0 is maximum). From the estimated X values, we infer the Alfv\'en Mach number for the general case of an oblique shock. It turns out that only a small region around the shock center is supercritical at earlier times, while higher up in the corona the whole shock becomes subcritical. This suggests that CME-driven shocks could be efficient particle accelerators at the initiation phases of the event, while at later times they progressively loose energy, also losing their capability to accelerate high energy particles. This result has important implications on the localization of particle acceleration sites and in the context of predictive space weather studies.

Eruption of a coronal mass ejection (CME) drags and "opens" the coronal magnetic field, presumably leading to the formation of a large-scale current sheet and the field relaxation by magnetic reconnection. We analyze physical characteristics of ray-like coronal features formed in the aftermath of CMEs, to check if the interpretation of this phenomenon in terms of reconnecting current sheet is consistent with the observations. The study is focused on measurements of the ray width, density excess, and coronal velocity field as a function of the radial distance. The morphology of rays indicates that they occur as a consequence of Petschek-like reconnection in the large scale current sheet formed in the wake of CME. The hypothesis is supported by the flow pattern, often showing outflows along the ray, and sometimes also inflows into the ray. The inferred inflow velocities range from 3 to 30 km s$^{-1}$, consistent with the narrow opening-angle of rays, adding up to a few degrees. The density of rays is an order of magnitude larger than in the ambient corona. The density-excess measurements are compared with the results of the analytical model in which the Petschek-like reconnection geometry is applied to the vertical current sheet, taking into account the decrease of the external coronal density and magnetic field with height. The model results are consistent with the observations, revealing that the main cause of the density excess in rays is a transport of the dense plasma from lower to larger heights by the reconnection outflow.