Given the very close proximity of their habitable zones, brown dwarfs represent high-value targets in the search for nearby transiting habitable planets that may be suitable for follow-up occultation spectroscopy. In this paper we develop search strategies to find habitable planets transiting brown dwarfs depending on their maximum habitable orbital period (PHZ out). Habitable planets with PHZ out shorter than the useful duration of a night (e.g. 8-10 hrs) can be screened with 100 percent completeness from a single location and in a single night (near-IR). More luminous brown dwarfs require continuous monitoring for longer duration, e.g. from space or from a longitude-distributed network (one test scheduling achieved - 3 telescopes, 13.5 contiguous hours). Using a simulated survey of the 21 closest known brown dwarfs (within 7 pc) we find that the probability of detecting at least one transiting habitable planet is between 4.5 +5.6-1.4 and 56 +31-13 percent, depending on our assumptions. We calculate that brown dwarfs within 5-10 pc are characterizable for potential biosignatures with a 6.5 m space telescope using approx. 1 percent of a 5-year mission's life-time spread over a contiguous segment only one fifth to one tenth of this duration.

Context. The photometric signal we receive from a star hosting a planet is modulated by the variation of the planet signal with its orbital phase. Such phase variations are observed for transiting hot Jupiters with current instrumentation, and have also been measured for one transiting terrestrial planet (Kepler 10 b) and one non-transiting gas giant (Ups A b). Future telescopes (JWST and EChO) will have the capability to measure thermal phase curves of exoplanets including hot rocky planets in transiting and non-transiting configurations, and at different wavelengths. Short-period planets with a mass below 10 R_EARTH are indeed frequent and nearby targets (within 10 pc) are already known and more are to be found. Aims. To test the possibility to use multi-wavelengths infrared phase curves to constrain the radius, the albedo and the orbital inclination of a non-transiting planet with no atmosphere and on a 1:1 spin orbit resonance. Methods. We model the thermal emission of a synchronous rocky planet with no atmosphere and its apparent variation with the orbital phase for a given orbital inclination. We assume that the planet is detected by radial velocity so its orbital period and minimum mass are known. We simulate observed noisy phase curves and then apply a procedure to retrieve the radius and albedo of the planet and the inclination of the orbit. Results. Airless planets can be distinguished from planets having a dense atmosphere and their radius, albedo and inclination (and therefore true mass) can be retrieved from multiband observations with MIRI-JWST and EChO in the 5-15 {\mu}m range. [...] As inclination above 60{\deg} represents half of randomly oriented orbits, the growing population of short-period terrestrial-sized planets detected by radial velocity surveys and transits should offer several nearby promising targets for this method [...]. See full abstract in the paper.

Atmospheric temperature and mixing ratio profiles of terrestrial planets vary with the spectral energy flux distribution for different types of M-dwarf stars and the planetary gravity. We investigate the resulting effects on the spectral appearance of molecular absorption bands, that are relevant as indicators for potential planetary habitability during primary and secondary eclipse for transiting terrestrial planets with Earth-like biomass emissions. Atmospheric profiles are computed using a plane-parallel, 1D climate model coupled with a chemistry model. We then calculate simulated spectra using a line-by-line radiative transfer model. We find that emission spectra during secondary eclipse show increasing absorption of methane, water and ozone for planets orbiting quiet M0-M3 dwarfs and the active M-type star AD Leo compared to solar type central stars. However, for planets orbiting very cool and quiet M dwarfs (M4 to M7), increasing temperatures in the mid-atmosphere lead to reduced absorption signals, making the detection of molecules more difficult in such scenarios. Transmission spectra during primary eclipse show strong absorption features of CH4, N2O and H2O for planets orbiting quiet M0-M7 stars and AD Leo. The N2O absorption of an Earth-sized planet orbiting a quiet M7 star can even be as strong as the CO2 signal. However, ozone absorption decreases for planets orbiting such cool central stars due to chemical effects in the atmosphere. To investigate the effect on the spectroscopic detection of absorption bands with potential future satellite missions, we compute signal-to-noise-ratios (SNR) for a James Webb Space Telescope (JWST)-like aperture telescope.

Eclipse exoplanet spectroscopy has yielded detection of H_2O, CH_4, CO_2 and CO in the atmosphere of hot jupiters and neptunes. About 40 large terrestrial planets are announced or confirmed, two of which are transiting, and another deemed habitable. Hence the potential for eclipse spectroscopy of terrestrial planets with James Webb Space Telescope (JWST) has become an active field of study. We explore the parameter space (type of stars, planet orbital periods and types, and instruments/wavelengths) in terms of the signal-to-noise ratio (S/N) achievable on the detection of spectroscopic features. We use analytic formula and model data for both the astrophysical scene and the instrument, to plot S/N contour maps, while indicating how the S/N scales with the fixed parameters. We systematically compare stellar photon noise-only figures with ones including detailed instrumental and zodiacal noises. Likelihood of occurring targets is based both on model and catalog star population of the solar neighborhood. The 9.6 micron ozone band is detectable (S/N = 3) with JWST, for a warm super-earth 6.7 pc away, using ~2% of the 5-year nominal mission time (summing observations, M4V and lighter host star for primary eclipses, M5V for secondary). If every star up to this mass limit and distance were to host a habitable planet, there should be statistically ~1 eclipsing case. Investigation of systematic noises in the co-addition of 5 years worth-, tens of days separated-, hours-long observations is critical, complemented by dedicated characterisation of the instruments, currently in integration phase. The census of nearby transiting habitable planets must be complete before the beginning of science operations.

The Mid Infra Red Instrument (MIRI) is one of the four instruments onboard the James Webb Space Telescope (JWST), providing imaging, coronagraphy and spectroscopy over the 5-28 microns band. To verify the optical performance of the instrument, extensive tests were performed at CEA on the flight model (FM) of the Mid-InfraRed IMager (MIRIM) at cryogenic temperatures and in the infrared. This paper reports on the point spread function (PSF) measurements at 5.6 microns, the shortest operating wavelength for imaging. At 5.6 microns the PSF is not Nyquist-sampled, so we use am original technique that combines a microscanning measurement strategy with a deconvolution algorithm to obtain an over-resolved MIRIM PSF. The microscanning consists in a sub-pixel scan of a point source on the focal plane. A data inversion method is used to reconstruct PSF images that are over-resolved by a factor of 7 compared to the native resolution of MIRI. We show that the FWHM of the high-resolution PSFs were 5-10% wider than that obtained with Zemax simulations. The main cause was identified as an out-of-specification tilt of the M4 mirror. After correction, two additional test campaigns were carried out, and we show that the shape of the PSF is conform to expectations. The FWHM of the PSFs are 0.18-0.20 arcsec, in agreement with simulations. 56.1-59.2% of the total encircled energy (normalized to a 5 arcsec radius) is contained within the first dark Airy ring, over the whole field of view. At longer wavelengths (7.7-25.5 microns), this percentage is 57-68%. MIRIM is thus compliant with the optical quality requirements. This characterization of the MIRIM PSF, as well as the deconvolution method presented here, are of particular importance, not only for the verification of the optical quality and the MIRI calibration, but also for scientific applications.

Instrumental projects that will improve the direct optical finding and characterisation of exoplanets have advanced sufficiently to trigger organized investigation and development of corresponding signal processing algorithms. The first step is the availability of field-of-view (FOV) models. These can then be submitted to various instrumental models, which in turn produce simulated data, enabling the testing of processing algorithms. We aim to set the specifications of a physical model for typical FOVs of these instruments. The dynamic in resolution and flux between the various sources present in such a FOV imposes a multiscale, independent layer approach. From review of current literature and through extrapolations from currently available data and models, we derive the features of each source-type in the field of view likely to pass the instrumental filter at exo-Earth level. Stellar limb darkening is shown to cause bias in leakage calibration if unaccounted for. Occurrence of perturbing background stars or galaxies in the typical FOV is unlikely. We extract galactic interstellar medium background emissions for current target lists. Galactic background can be considered uniform over the FOV, and it should show no significant drift with parallax. Our model specifications have been embedded into a Java simulator, soon to be made open-source. We have also designed an associated FITS input/output format standard that we present here.