The Transiting Exoplanet Survey Satellite (TESS) is observing bright known planet-host stars across almost the entire sky. These stars have been subject to extensive ground-based observations, providing a large number of radial velocity (RV) measurements. In this work we use the new TESS photometric observations to characterize the star $\lambda^2$ Fornacis, and following this to update the parameters of the orbiting planet $\lambda^2$ For b. We measure the p-mode oscillation frequencies in $\lambda^2$ For, and in combination with non-seismic parameters estimate the stellar fundamental properties using stellar models. Using the revised stellar properties and a time series of archival RV data from the UCLES, HIRES and HARPS instruments spanning almost 20 years, we refit the orbit of $\lambda^2$ For b and search the RV residuals for remaining variability. We find that $\lambda^2$ For has a mass of $1.16\pm0.03$M$_\odot$ and a radius of $1.63\pm0.04$R$_\odot$, with an age of $6.3\pm0.9$Gyr. This and the updated RV measurements suggest a mass of $\lambda^2$ For b of $16.8^{+1.2}_{-1.3}$M$_\oplus$, which is $\sim5$M$_\oplus$ less than literature estimates. We also detect a periodicity at 33 days in the RV measurements, which is likely due to the rotation of the host star. While previous literature estimates of the properties of $\lambda^2$ are ambiguous, the asteroseismic measurements place the star firmly at the early stage of its subgiant evolutionary phase. Typically only short time series of photometric data are available from TESS, but by using asteroseismology it is still possible to provide tight constraints on the properties of bright stars that until now have only been observed from the ground. This prompts a reexamination of archival RV data from the past few decades to update the characteristics of the planet hosting systems observed by TESS for which asteroseismology is possible.

Transport of angular momentum in stellar interiors is currently not well understood. Asteroseismology can provide us with estimates of internal rotation of stars and thereby advances our understanding of angular momentum transport. We can measure core-rotation rates in red-giant stars and we can place upper bounds on surface-rotation rates using measurements of dipole ($l=1$) modes. Here, we aim to determine the theoretical sensitivity of modes of different spherical degree towards the surface rotation. Additionally, we aim to identify modes that can potentially add sensitivity at intermediate radii. We used asteroseismic rotational inversions to probe the internal stellar rotation profiles in red-giant models from the base of the red-giant branch up to the luminosity bump. We used the inversion method of multiplicative optimally localised averages (MOLA) to assess how well internal and surface rotation rates can be recovered from different mode sets and different synthetic rotation profiles. We confirm that dipole mixed modes are sufficient to set constraints on the average core-rotation rates in red giants. However, surface-rotation rates estimated with only dipole mixed modes are contaminated by the core rotation. We show that the sensitivity to the surface rotation decreases from the base of the red-giant branch until it reaches a minimum at 0.6-0.8$L_\text{bump}$ due to a glitch in the buoyancy frequency. Thereafter a narrow range of increased surface sensitivity just below the bump luminosity exists. Quadrupole and octopole modes have more sensitivity in the outer parts of the star. If observed, quadrupole and octopole modes enable us to distinguish between differential and solid body rotation in the convection zone. To obtain accurate estimates of rotation rates at intermediate radii, acoustic oscillation modes with a spherical degree of $l\approx10$ are needed.

Convective boundary mixing (CBM) is ubiquitous in stellar evolution. It is a necessary ingredient in the models in order to match observational constraints from clusters, binaries and single stars alike. We compute `effective overshoot' measures that reflect the extent of mixing and which can differ significantly from the input overshoot values set in the stellar evolution codes. We use constraints from pressure modes to infer the CBM properties of Kepler and CoRoT main-sequence and subgiant oscillators, as well as in two radial velocity targets (Procyon A and $\alpha$ Cen A). Collectively these targets allow us to identify how measurement precision, stellar spectral type, and overshoot implementation impact the asteroseismic solution. With these new measures we find that the `effective overshoot' for most stars is in line with physical expectations and calibrations from binaries and clusters. However, two F-stars in the CoRoT field (HD 49933 and HD 181906) still necessitate high overshoot in the models. Due to short mode lifetimes, mode identification can be difficult in these stars. We demonstrate that an incongruence between the radial and non-radial modes drives the asteroseismic solution to extreme structures with highly-efficient CBM as an inevitable outcome. Understanding the cause of seemingly anomalous physics for such stars is vital for inferring accurate stellar parameters from TESS data with comparable timeseries length.

Context. The large quantity of high-quality asteroseismic data that obtained from space-based photometric missions and the accuracy of the resulting frequencies motivate a careful consideration of the accuracy of computed oscillation frequencies of stellar models, when applied as diagnostics of the model properties. Aims. Based on models of red-giant stars that have been independently calculated using different stellar evolution codes, we investigate the extent to which the differences in the model calculation affect the model oscillation frequencies. Methods. For each of the models, which cover four different masses and different evolution stages on the red-giant branch, we computed full sets of low-degree oscillation frequencies using a single pulsation code and, from these frequencies, typical asteroseismic diagnostics. In addition, we carried out preliminary analyses to relate differences in the oscillation properties to the corresponding model differences. Results. In general, the differences in asteroseismic properties between the different models greatly exceed the observational precision of these properties, in particular for the nonradial modes whose mixed acoustic and gravity-wave character makes them sensitive to the structure of the deep stellar interior. In some cases, identifying these differences led to improvements in the final models presented here and in Paper I; here we illustrate particular examples of this. Conclusions. Further improvements in stellar modelling are required in order fully to utilise the observational accuracy to probe intrinsic limitations in the modelling. However, our analysis of the frequency differences and their relation to stellar internal properties provides a striking illustration of the potential of the mixed modes of red-giant stars for the diagnostics of stellar interiors.

The search for twins of the Sun and Earth relies on accurate characterization of stellar and exoplanetary parameters: i.e., ages, masses, and radii. In the modern era of asteroseismology, parameters of solar-like stars are derived by fitting theoretical models to observational data, which include measurements of their oscillation frequencies, metallicity [Fe/H], and effective temperature Teff. Combining this information with transit data furthermore yields the corresponding parameters for their exoplanets. While [Fe/H] and Teff are commonly stated to a precision of ~0.1 dex and ~100 K, the impact of errors in their measurement has not been studied in practice within the context of the parameters derived from them. Here we use the Stellar Parameters in an Instant (SPI) pipeline to estimate the parameters of nearly 100 stars observed by Kepler and Gaia, many of which are confirmed planet hosts. We adjust the reported spectroscopic measurements of these stars by introducing faux systematic errors and artificially increasing the reported uncertainties, and quantify the differences in the resulting parameters. We find that a systematic error of 0.1 dex in [Fe/H] translates to differences of only 4%, 2%, and 1% on average in the resulting stellar ages, masses, and radii, which are well within their uncertainties (~11%, 3.5%, 1.4%) as derived by SPI. We also find that increasing the uncertainty of [Fe/H] measurements by 0.1 dex increases the uncertainties by only 0.01 Gyr, 0.02 M_sun, and 0.01 R_sun, which are again well below their reported uncertainties (0.5 Gyr, 0.04 M_sun, 0.02 R_sun). The results for Teff at 100 K are similar. Stellar parameters from SPI are unchanged within uncertainties by errors of up to 0.14 dex or 175 K, and are even more robust to errors in Teff than the seismic scaling relations. Consequently, the parameters for their exoplanets are robust as well.

Period-colour and amplitude-colour (PCAC) relations can be used to probe both the hydrodynamics of outer envelope structure and evolutionary status of Cepheids and RR Lyraes. In this work, we incorporate the PCAC relations for RR Lyraes, BL Her, W Vir and classical Cepheids in a single unifying theory that involves the interaction of the hydrogen ionization front (HIF) and stellar photosphere and the theory of stellar evolution. PC relations for RR Lyraes and classical Cepheids using OGLE-IV data are found to be consistent with this theory: RR Lyraes have shallow/sloped relations at minimum/maximum light whilst long-period ($P>10$ days) Cepheids exhibit sloped/flat PC relations at minimum/maximum light. The differences in the PC relations for Cepheids and RR Lyraes can be explained based on the relative location of the HIF and stellar photosphere which changes depending on their position on the HR diagram. We also extend our analysis of PCAC relations for type II Cepheids in the Galactic bulge, LMC and SMC using OGLE-IV data. We find that BL Her stars have sloped PC relations at maximum and minimum light similar to short-period ($P<10$ days) classical Cepheids. W Vir stars exhibit sloped/flat PC relation at minimum/maximum light similar to long-period classical Cepheids. We also compute state-of-the-art 1D radiation hydrodynamic models of RR Lyraes, BL Her and classical Cepheids using the radial stellar pulsation code in MESA to further test these ideas theoretically and find that the models are generally consistent with this picture. We are thus able to explain PC relations at maximum and minimum light across a broad spectrum of variable star types.

(Abridged). We introduce the Aarhus Red Giants Challenge, a series of detailed comparisons between widely used stellar evolution and oscillation codes aiming at establishing the minimum level of uncertainties in properties of red giants arising solely from numerical implementations. Using 9 state-of-the-art stellar evolution codes, we defined a set of input physics and physical constants for our calculations and calibrated the convective efficiency to a specific point on the main sequence. We produced evolutionary tracks and stellar structure models at fixed radius along the red-giant branch for masses of 1.0 M$_\odot$, 1.5 M$_\odot$, 2.0 M$_\odot$, and 2.5 M$_\odot$, and compared the predicted stellar properties. Once models have been calibrated on the main sequence we find a residual spread in the predicted effective temperatures across all codes of ~20 K at solar radius and ~30-40 K in the RGB regardless of the considered stellar mass. The predicted ages show variations of 2-5% (increasing with stellar mass) which we track down to differences in the numerical implementation of energy generation. The luminosity of the RGB-bump shows a spread of about 10% for the considered codes, which translates into magnitude differences of ~0.1 mag in the optical V-band. We also compare the predicted [C/N] abundance ratio and found a spread of 0.1 dex or more for all considered masses. Our comparisons show that differences at the level of a few percent still remain in evolutionary calculations of red giants branch stars despite the use of the same input physics. These are mostly due to differences in the energy generation routines and interpolation across opacities, and call for further investigations on these matters in the context of using properties of red giants as benchmarks for astrophysical studies.

Owing to their simplicity and ease of application, seismic scaling relations are widely used to determine the properties of stars exhibiting solar-like oscillations, such as solar twins and red giants. So far, no seismic scaling relations for determining the ages of red giant stars have been developed. Such relations would be desirable for galactic archaeology, which uses stellar ages to map the history of the Milky Way. The ages of red giants must instead be estimated with reference to grids of theoretical stellar models, which can be computationally intensive. Here I present an exhaustive search for scaling age relations involving different combinations of observable quantities. The candidate scaling relations are calibrated and tested using more than 1,000 red giant stars whose ages were obtained via grid-based modeling. I report multiple high-quality scaling relations for red giant branch stars, the best of which are shown to be approximately as accurate as grid-based modeling with typical uncertainties of 15%. Additionally, I present new scaling mass and radius relations for red giants as well.

The period of pulsation and the structure of the light curve for Cepheid and RR Lyrae variables depend on the fundamental parameters of the star: mass, radius, luminosity, and effective temperature. Here we train artificial neural networks on theoretical pulsation models to predict the fundamental parameters of these stars based on their period and light curve structure. We find significant improvements to estimates of these parameters made using light curve structure and period over estimates made using only the period. Given that the models are able to reproduce most observables, we find that the fundamental parameters of these stars can be estimated up to 60% more accurately when light curve structure is taken into consideration. We quantify which aspects of light curve structure are most important in determining fundamental parameters, and find for example that the second Fourier amplitude component of RR Lyrae light curves is even more important than period in determining the effective temperature of the star. We apply this analysis to observations of hundreds Cepheids in the Large Magellanic Cloud and thousands of RR Lyrae in the Magellanic Clouds and Galactic bulge to produce catalogs of estimated masses, radii, luminosities, and other parameters of these stars. As an example application, we estimate Wesenheit indices and use those to derive distance moduli to the Magellanic Clouds of $\mu_{\text{LMC},\text{CEP}} = 18.688 \pm 0.093$, $\mu_{\text{LMC},\text{RRL}} = 18.52 \pm 0.14$, and $\mu_{\text{SMC},\text{RRL}} = 18.88 \pm 0.17$ mag.

We investigate the variation of the gravitational constant $G$ over the history of the Universe by modeling the effects on the evolution and asteroseismology of the low-mass star KIC 7970740, which is one of the oldest (~11 Gyr) and best-observed solar-like oscillators in the Galaxy. From these data we find $\dot{G}/G = (1.2 \pm 2.6) \times 10^{-12}~\text{yr}^{-1}$, that is, no evidence for any variation in $G$. We also find a Bayesian asteroseismic estimate of the age of the Universe as well as astrophysical S-factors for five nuclear reactions obtained through a 12-dimensional stellar evolution Markov chain Monte Carlo simulation.

The goal of stellar evolution theory is to predict the structure of stars throughout their lifetimes. Usually, these predictions can be assessed only indirectly, for example by comparing predicted and observed effective temperatures and luminosities. Thanks now to asteroseismology, which can reveal the internal structure of stars, it becomes possible to compare the predictions from stellar evolution theory to actual stellar structures. In this work, we present an inverse analysis of the oscillation data from the solar-type star KIC 6225718, which was observed by the \emph{Kepler} space observatory during its nominal mission. As its mass is about 20% greater than solar, this star is predicted to transport energy by convection in its nuclear-burning core. We find significant differences between the predicted and actual structure of the star in the radiative interior near to the convective core. In particular, the predicted sound speed is higher than observed in the deep interior of the star, and too low at a fractional radius of 0.25 and beyond. The cause of these discrepancies is unknown, and is not remedied by known physics in the form of convective overshooting or elemental diffusion.

A simple solar scaling relation for estimating the ages of main-sequence stars from asteroseismic and spectroscopic data is developed. New seismic scaling relations for estimating mass and radius are presented as well, including a purely seismic radius scaling relation (i.e., no dependence on temperature). The relations show substantial improvement over the classical scaling relations and perform similarly well to grid-based modeling.

(Abridged) The Maunakea Spectroscopic Explorer (MSE) is an end-to-end science platform for the design, execution and scientific exploitation of spectroscopic surveys. It will unveil the composition and dynamics of the faint Universe and impact nearly every field of astrophysics across all spatial scales, from individual stars to the largest scale structures in the Universe. Major pillars in the science program for MSE include (i) the ultimate Gaia follow-up facility for understanding the chemistry and dynamics of the distant Milky Way, including the outer disk and faint stellar halo at high spectral resolution (ii) galaxy formation and evolution at cosmic noon, via the type of revolutionary surveys that have occurred in the nearby Universe, but now conducted at the peak of the star formation history of the Universe (iii) derivation of the mass of the neutrino and insights into inflationary physics through a cosmological redshift survey that probes a large volume of the Universe with a high galaxy density. MSE is positioned to become a critical hub in the emerging international network of front-line astronomical facilities, with scientific capabilities that naturally complement and extend the scientific power of Gaia, the Large Synoptic Survey Telescope, the Square Kilometer Array, Euclid, WFIRST, the 30m telescopes and many more.

The Maunakea Spectroscopic Explorer (MSE) is a planned 11.25-m aperture facility with a 1.5 square degree field of view that will be fully dedicated to multi-object spectroscopy. A rebirth of the 3.6m Canada-France-Hawaii Telescope on Maunakea, MSE will use 4332 fibers operating at three different resolving powers (R ~ 2500, 6000, 40000) across a wavelength range of 0.36-1.8mum, with dynamical fiber positioning that allows fibers to match the exposure times of individual objects. MSE will enable spectroscopic surveys with unprecedented scale and sensitivity by collecting millions of spectra per year down to limiting magnitudes of g ~ 20-24 mag, with a nominal velocity precision of ~100 m/s in high-resolution mode. This white paper describes science cases for stellar astrophysics and exoplanet science using MSE, including the discovery and atmospheric characterization of exoplanets and substellar objects, stellar physics with star clusters, asteroseismology of solar-like oscillators and opacity-driven pulsators, studies of stellar rotation, activity, and multiplicity, as well as the chemical characterization of AGB and extremely metal-poor stars.

We discuss time-series analyses of classical Cepheid and RR Lyrae variables in the Galaxy and the Magellanic Clouds at multiple wavelengths. We adopt the Fourier decomposition method to quantify the structural changes in the light curves of Cepheid and RR Lyrae variables. A quantitative comparison of Cepheid Fourier parameters suggests that the canonical mass-luminosity models that lie towards the red-edge of the instability strip show a greater offset with respect to observations for short-period Cepheids. RR Lyrae models are consistent with observations in most period bins. We use ensemble light curve analysis to predict the physical parameters of observed Cepheid and RR Lyrae variables using machine learning methods. Our preliminary results suggest that the posterior distributions of mass, luminosity, temperature and radius for Cepheids and RR Lyraes can be well-constrained for a given metal abundance, provided a smoother grid of models is adopted in various input physical parameters.

We present an asteroseismic analysis of the Kepler light curve of KIC 8263801, a red-giant star in the open cluster NGC 6866 that has previously been reported to be a helium-burning red-clump star. We extracted the frequencies of the radial and quadrupole modes from its frequency power spectrum and determined its properties using a grid of evolutionary models constructed with MESA. The oscillation frequencies were calculated using the GYRE code and the surface term was corrected using the Ball & Gizon(2014) prescription. We find that the star has a mass of $M/M_{\odot} = 1.793\pm 0.072$, age $t=1.48\pm 0.21$ Gyr and radius $R/R_{\odot} = 10.53\pm 0.28$. By analyzing the internal structure of the best-fitting model, we infer the evolutionary status of the star KIC 8263801 as being on the ascending part of the red giant branch, and not on the red clump. This result is verified using a purely asteroseismic diagnostic, the $\epsilon_{c}-\Delta\nu_{c}$ diagram which can distinguish red giant branch stars from red clump stars. Finally, by comparing its age with NGC 6866 ($t=0.65 \pm 0.1$ Gyr) we conclude that KIC 8263801 is not a member of this open cluster.

Asteroseismology allows us to probe the internal structure of stars through their global modes of oscillation. Thanks to missions such as the NASA Kepler space observatory, we now have high-quality asteroseismic data for nearly 100 solar-type stars. In this thesis, new techniques to measure the ages, masses, and radii of stars are presented, as well as a way to infer their internal structure.

We present a method for measuring internal stellar structure based on asteroseismology that we call "inversions for agreement." The method accounts for imprecise estimates of stellar mass and radius as well as the relatively limited oscillation mode sets that are available for distant stars. By construction, the results of the method are independent of stellar models. We apply this method to measure the isothermal sound speeds in the cores of the solar-type stars 16 Cyg A and B using asteroseismic data obtained from Kepler observations. We compare the asteroseismic structure that we deduce against best-fitting evolutionary models and find that the sound speeds in the cores of these stars exceed those of the models.

The masses and radii of solar-like oscillators can be estimated through the asteroseismic scaling relations. These relations provide a direct link between observables, i.e. effective temperature and characteristics of the oscillation spectra, and stellar properties, i.e. mean density and surface gravity (thus mass and radius). These scaling relations are commonly used to characterize large samples of stars. Usually, the Sun is used as a reference from which the structure is scaled. However, for stars that do not have a similar structure as the Sun, using the Sun as a reference introduces systematic errors as large as 10\% in mass and 5\% in radius. Several alternatives for the reference of the scaling relation involving the large frequency separation (typical frequency difference between modes of the same degree and consecutive radial order) have been suggested in the literature. In a previous paper, we presented a reference function with a dependence on both effective temperature and metallicity. The accuracy of predicted masses and radii improved considerably when using reference values calculated from our reference function. However, the residuals indicated that stars on the red-giant branch possess a mass dependence that was not accounted for. Here, we present a reference function for the scaling relation involving the large frequency separation that includes the mass dependence. This new reference function improves the derived masses and radii significantly by removing the systematic differences and mitigates the trend with $\nu_{\rm max}$ (frequency of maximum oscillation power) that exists when using the solar value as a reference.

With the advent of dedicated photometric space missions, the ability to rapidly process huge catalogues of stars has become paramount. Bellinger and Angelou et al. (2016) recently introduced a new method based on machine learning for inferring the stellar parameters of main-sequence stars exhibiting solar-like oscillations. The method makes precise predictions that are consistent with other methods, but with the advantages of being able to explore many more parameters while costing practically no time. Here we apply the method to 52 so-called "LEGACY" main-sequence stars observed by the Kepler space mission. For each star, we present estimates and uncertainties of mass, age, radius, luminosity, core hydrogen abundance, surface helium abundance, surface gravity, initial helium abundance, and initial metallicity as well as estimates of their evolutionary model parameters of mixing length, overshooting coefficient, and diffusion multiplication factor. We obtain median uncertainties in stellar age, mass, and radius of 14.8%, 3.6%, and 1.7%, respectively. The source code for all analyses and for all figures appearing in this manuscript can be found electronically at: https://github.com/earlbellinger/asteroseismology

From its surface properties it can be difficult to determine whether a red-giant star is in its helium-core-burning phase or only burning hydrogen in a shell around an inert helium core. Stars in either of these stages can have similar effective temperatures, radii and hence luminosities, i.e. they can be located at the same position in the Hertzsprung-Russell diagram. Asteroseismology -- the study of the internal structure of stars through their global oscillations -- can provide the necessary additional constraints to determine the evolutionary states of red-giant stars. Here, we present a method that uses grid-based modelling based on global asteroseismic properties ($\nu_{\rm max}$, frequency of maximum oscillation power; and $\Delta\nu$, frequency spacing between modes of the same degree and consecutive radial orders) as well as effective temperature and metallicity to determine the evolutionary phases. This method is applicable even to timeseries data of limited length, although with a small fraction of miss-classifications.

Astronomy is in an era where all-sky surveys are mapping the Galaxy. The plethora of photometric, spectroscopic, asteroseismic and astrometric data allows us to characterise the comprising stars in detail. Here we quantify to what extent precise stellar observations reveal information about the properties of a star, including properties that are unobserved, or even unobservable. We analyse the diagnostic potential of classical and asteroseismic observations for inferring stellar parameters such as age, mass and radius from evolutionary tracks of solar-like oscillators on the lower main sequence. We perform rank correlation tests in order to determine the capacity of each observable quantity to probe structural components of stars and infer their evolutionary histories. We also analyse the principal components of classic and asteroseismic observables to highlight the degree of redundancy present in the measured quantities and demonstrate the extent to which information of the model parameters can be extracted. We perform multiple regression using combinations of observable quantities in a grid of evolutionary simulations and appraise the predictive utility of each combination in determining the properties of stars. We identify the combinations that are useful and provide limits to where each type of observable quantity can reveal information about a star. We investigate the accuracy with which targets in the upcoming TESS and PLATO missions can be characterized. We demonstrate that the combination of observations from GAIA and PLATO will allow us to tightly constrain stellar masses, ages and radii with machine learning for the purposes of Galactic and planetary studies.

Owing to the remarkable photometric precision of space observatories like Kepler, stellar and planetary systems beyond our own are now being characterized en masse for the first time. These characterizations are pivotal for endeavors such as searching for Earth-like planets and solar twins, understanding the mechanisms that govern stellar evolution, and tracing the dynamics of our Galaxy. The volume of data that is becoming available, however, brings with it the need to process this information accurately and rapidly. While existing methods can constrain fundamental stellar parameters such as ages, masses, and radii from these observations, they require substantial computational efforts to do so. We develop a method based on machine learning for rapidly estimating fundamental parameters of main-sequence solar-like stars from classical and asteroseismic observations. We first demonstrate this method on a hare-and-hound exercise and then apply it to the Sun, 16 Cyg A & B, and 34 planet-hosting candidates that have been observed by the Kepler spacecraft. We find that our estimates and their associated uncertainties are comparable to the results of other methods, but with the additional benefit of being able to explore many more stellar parameters while using much less computation time. We furthermore use this method to present evidence for an empirical diffusion-mass relation. Our method is open source and freely available for the community to use. The source code for all analyses and for all figures appearing in this manuscript can be found electronically at https://github.com/earlbellinger/asteroseismology

The scaling relations between global asteroseismic observables and stellar properties are widely used to estimate masses and radii of stars exhibiting solar-like oscillations. Since the mass and radius of the Sun are known independently, the Sun is commonly used as a reference to scale to. However, the validity of the scaling relations depends on the homology between the star under study and the reference star. Solar-like oscillators span a wide range of masses and metallicities, as well as evolutionary phases. Most of these stars are therefore not homologous to the Sun. This leads to errors of up to 10% (5%) in mass (radius) when using the asteroseismic scaling relations with the Sun as the reference. In this paper we derive a reference function to replace the solar-reference value used in the large-frequency-separation scaling relation. Our function is the first that depends on both effective temperature and metallicity, and is applicable from the end of the main sequence to just above the bump on the red giant branch. This reference function improves the estimates of masses and radii determined through scaling relations by a factor of 2, i.e. allows masses and radii to be recovered with an accuracy of 5% and 2%, respectively.

Discoveries of RR Lyrae and Cepheid variable stars with multiple modes of pulsation have increased tremendously in recent years. The Fourier spectra of these stars can be quite complicated due to the large number of combination frequencies that can exist between their modes. As a result, light-curve fits to these stars often suffer from undesirable ringing effects that arise from noisy observations and poor phase coverage. These non-physical overfitting artifacts also occur when fitting the harmonics of single-mode stars as well. Here we present a new method for fitting light curves that is much more robust against these effects. We prove that the amplitude measurement problem is very difficult (NP-hard) and provide a heuristic algorithm for solving it quickly and accurately.

This paper discusses two aspects of current research on the Cepheid period-luminosity (P-L) relation: the derivation of mid-infrared (MIR) P-L relations and the investigation of multi-phase P-L relations. The MIR P-L relations for Cepheids are important in the James Webb Space Telescope era for the distance scale issue, as the relations have potential to derive the Hubble constant within ~ 2% accuracy - a critical constraint in precision cosmology. Consequently, we have derived the MIR P-L relations for Cepheids in the Large and Small Magellanic Clouds, using archival data from Spitzer Space Telescope. We also compared currently empirical P-L relations for Cepheids in the Magellanic Clouds to the synthetic MIR P-L relations derived from pulsational models. For the study of multi-phase P-L relations, we present convincing evidence that the Cepheid P-L relations in the Magellanic Clouds are highly dynamic quantities that vary significantly when considered as a function of pulsational phase. We found that there is a difference in P-L relations as a function of phase between the Cepheids in each of the Clouds; the most likely cause for this is the metallicity difference between the two galaxies. We also investigated the dispersion of the multi-phase P-L relations, and found that the minimum dispersion do not differ significantly from the mean light P-L dispersion.