We perform an analysis of the diffuse low-frequency Galactic components in the Southern part of the Gould Belt system (130^\circ\leq l\leq 230^\circ and -50^\circ\leq b\leq -10^\circ). Strong ultra-violet (UV) flux coming from the Gould Belt super-association is responsible for bright diffuse foregrounds that we observe from our position inside the system and that can help us improve our knowledge of the Galactic emission. Free-free emission and anomalous microwave emission (AME) are the dominant components at low frequencies (\nu < 40 GHz), while synchrotron emission is very smooth and faint. We separate diffuse free-free emission and AME from synchrotron emission and thermal dust emission by using Planck data, complemented by ancillary data, using the "Correlated Component Analysis" (CCA) component separation method and we compare with the results of cross-correlation of foreground templates with the frequency maps. We estimate the electron temperature T_e from H$\alpha$ and free-free emission using two methods (temperature-temperature plot and cross-correlation) and we obtain T_e ranging from 3100 to 5200 K, for an effective fraction of absorbing dust along the line of sight of 30% (f_d=0.3). We estimate the frequency spectrum of the diffuse AME and we recover a peak frequency (in flux density units) of 25.5 \pm 1.5 GHz. We verify the reliability of this result with realistic simulations that include the presence of biases in the spectral model for the AME and in the free-free template. By combining physical models for vibrational and rotational dust emission and adding the constraints from the thermal dust spectrum from Planck and IRAS we are able to get a good description of the frequency spectrum of the AME for plausible values of the local density and radiation field.

We describe the processing of data from the Low Frequency Instrument (LFI) used in production of the Planck Early Release Compact Source Catalogue (ERCSC). In particular, we discuss the steps involved in reducing the data from telemetry packets to cleaned, calibrated, time-ordered data (TOD) and frequency maps. Data are continuously calibrated using the modulation of the temperature of the cosmic microwave background radiation induced by the motion of the spacecraft. Noise properties are estimated from TOD from which the sky signal has been removed using a generalized least square map-making algorithm. Measured 1/f noise knee-frequencies range from 100mHz at 30GHz to a few tens of mHz at 70GHz. A destriping code (Madam) is employed to combine radiometric data and pointing information into sky maps, minimizing the variance of correlated noise. Noise covariance matrices required to compute statistical uncertainties on LFI and Planck products are also produced. Main beams are estimated down to the approx -10dB level using Jupiter transits, which are also used for geometrical calibration of the focal plane.

We present a data analysis pipeline for CMB polarization experiments, running from multi-frequency maps to the power spectra. We focus mainly on component separation and, for the first time, we work out the covariance matrix accounting for errors associated to the separation itself. This allows us to propagate such errors and evaluate their contributions to the uncertainties on the final products.The pipeline is optimized for intermediate and small scales, but could be easily extended to lower multipoles. We exploit realistic simulations of the sky, tailored for the Planck mission. The component separation is achieved by exploiting the Correlated Component Analysis in the harmonic domain, that we demonstrate to be superior to the real-space application (Bonaldi et al. 2006). We present two techniques to estimate the uncertainties on the spectral parameters of the separated components. The component separation errors are then propagated by means of Monte Carlo simulations to obtain the corresponding contributions to uncertainties on the component maps and on the CMB power spectra. For the Planck polarization case they are found to be subdominant compared to noise.

We present the first tests of a new method, the Correlated Component Analysis (CCA) based on second-order statistics, to estimate the mixing matrix, a key ingredient to separate astrophysical foregrounds superimposed to the Cosmic Microwave Background (CMB). In the present application, the mixing matrix is parameterized in terms of the spectral indices of Galactic synchrotron and thermal dust emissions, while the free-free spectral index is prescribed by basic physics, and is thus assumed to be known. We consider simulated observations of the microwave sky with angular resolution and white stationary noise at the nominal levels for the PLANCK satellite, and realistic foreground emissions, with a position dependent synchrotron spectral index. We work with two sets of PLANCK frequency channels: the low frequency set, from 30 to 143 GHz, complemented with the Haslam 408 MHz map, and the high frequency set, from 217 to 545 GHz. The concentration of intense free-free emission on the Galactic plane introduces a steep dependence of the spectral index of the global Galactic emission with Galactic latitude, close to the Galactic equator. This feature makes difficult for the CCA to recover the synchrotron spectral index in this region, given the limited angular resolution of PLANCK, especially at low frequencies. A cut of a narrow strip around the Galactic equator (|b|<3 deg), however, allows us to overcome this problem. We show that, once this strip is removed, the CCA allows an effective foreground subtraction, with residual uncertainties inducing a minor contribution to errors on the recovered CMB power spectrum.

We present the application of the Fast Independent Component Analysis ({\ica}) technique for blind component separation to polarized astrophysical emission. We study how the Cosmic Microwave Background (CMB) polarized signal, consisting of $E$ and $B$ modes, can be extracted from maps affected by substantial contamination from diffuse Galactic foreground emission and instrumental noise. {We implement Monte Carlo chains varying the CMB and noise realizations in order to asses the average capabilities of the algorithm and their variance.} We perform the analysis of all sky maps simulated according to the {\sc Planck} satellite capabilities, modelling the sky signal as a superposition of the CMB and of the existing simulated polarization templates of Galactic synchrotron. Our results indicate that the angular power spectrum of CMB $E$-mode can be recovered on all scales up to $\ell\simeq 1000$, corresponding to the fourth acoustic oscillation, while the $B$-mode power spectrum can be detected, up to its turnover at $\ell\simeq 100$, if the ratio of tensor to scalar contributions to the temperature quadrupole exceeds 30%. The power spectrum of the cross correlation between total intensity and polarization, $TE$, can be recovered up to $\ell\simeq 1200$, corresponding to the seventh $TE$ acoustic oscillation.

This paper deals with a source separation strategy based on second-order statistics, namely, on data covariance matrices estimated at several lags. In general, ``blind'' approaches to source separation do not assume any knowledge on the mixing operator; however, any prior information about the possible structure of the mixing operator can improve the solution. Unlike ICA blind separation approaches, where mutual independence between the sources is assumed, our method only needs to constrain second-order statistics, and is effective even if the original sources are significantly correlated. Besides the mixing matrix, our strategy is also capable to evaluate the source covariance functions at several lags. Moreover, once the mixing parameters have been identified, a simple deconvolution can be used to estimate the probability density functions of the source processes. To benchmark our algorithm, we used a database that simulates the one expected from the instruments that will operate onboard ESA's Planck Surveyor Satellite to measure the CMB anisotropies all over the celestial sphere. The assumption was made that the emission spectra of the galactic foregrounds can be parametrised, thus reducing the number of unknowns for system identification to the number of the foreground radiations. We performed separation in several sky patches, featuring different levels of galactic contamination to the CMB, and assuming several noise levels, including the ones derived from the Planck specifications.

We present a new, fast, algorithm for the separation of astrophysical components superposed in maps of the sky, based on the fast Independent Component Analysis technique (FastICA). It allows to recover both the spatial pattern and the frequency scalings of the emissions from statistically independent astrophysical processes, present along the line-of-sight, from multi-frequency observations. We apply FastICA to simulated observations of the microwave sky with angular resolution and instrumental noise at the mean nominal levels for the Planck satellite, containing the most important known diffuse signals: the Cosmic Microwave Background (CMB), Galactic synchrotron, dust and free-free emissions. A method for calibrating the reconstructed maps of each component at each frequency has been devised. The spatial pattern of all the components have been recovered on all scales probed by the instrument. In particular, the CMB angular power spectra is recovered at the percent level up to $\ell_{max}\simeq 2000$. Frequency scalings and normalization have been recovered with better than percent precision for all the components at frequencies and in sky regions where their signal-to-noise ratio exceeds 1.5; the error increases at ten percent level for signal-to-noise ratios about 1. Runs have been performed on a Pentium III 600 MHz computer; FastICA typically took a time of the order of 10 minutes for all-sky simulations with 3.5 arcminutes pixel size. We conclude that FastICA is an extremly promising technique for analyzing the maps that will be obtained by the forthcoming high resolution CMB experiments.

The Independent Component Analysis (ICA) algorithm is implemented as a neural network for separating signals of different origin in astrophysical sky maps. Due to its self-organizing capability, it works without prior assumptions on the signals, neither on their frequency scaling, nor on the signal maps themselves; instead, it learns directly from the input data how to separate the physical components, making use of their statistical independence. To test the capabilities of this approach, we apply the ICA algorithm on sky patches, taken from simulations and observations, at the microwave frequencies, that are going to be deeply explored in a few years on the whole sky, by the Microwave Anisotropy Probe (MAP) and by the {\sc Planck} Surveyor Satellite. The maps are at the frequencies of the Low Frequency Instrument (LFI) aboard the {\sc Planck} satellite (30, 44, 70 and 100 GHz), and contain simulated astrophysical radio sources, Cosmic Microwave Background (CMB) radiation, and Galactic diffuse emissions from thermal dust and synchrotron. We show that the ICA algorithm is able to recover each signal, with precision going from 10% for the Galactic components to percent for CMB; radio sources are almost completely recovered down to a flux limit corresponding to $0.7\sigma_{CMB}$, where $\sigma_{CMB}$ is the rms level of CMB fluctuations. The signal recovering possesses equal quality on all the scales larger then the pixel size. In addition, we show that the frequency scalings of the input signals can be partially inferred from the ICA outputs, at the percent precision for the dominant components, radio sources and CMB.