Turbulence simulations play a key role in advancing the general understanding of the physical properties turbulence and in interpreting astrophysical observations of turbulent plasmas. For the sake of simplicity, however, turbulence simulations are often conducted in the isothermal limit. Given that the majority of astrophysical systems are not governed by isothermal dynamics, we aim to quantify the impact of thermodynamics on the physics of turbulence, through varying adiabatic index, $\gamma$, combined with a range of optically thin cooling functions. In this paper, we present a suite of ideal magnetohydrodynamics simulations of thermally balanced stationary turbulence in the subsonic, super-Alfv\'enic, high beta (ratio of thermal to magnetic pressure) regime, where turbulent dissipation is balanced by two idealized cooling functions (approximating linear cooling and free-free emission) and examine the impact of the equation of state by considering cases that correspond to isothermal, monatomic and diatomic gases. We find a strong anticorrelation between thermal and magnetic pressure independent of thermodynamics, whereas the strong anticorrelation between density and magnetic field found in the isothermal case weakens with increasing $\gamma$. Similarly, with the linear relation between variations in density and thermal pressure with sonic Mach number becomes steeper with increasing $\gamma$. This suggests that there exists a degeneracy in these relations with respect to thermodynamics and Mach number in this regime, which is dominated by slow magnetosonic modes. These results have implications for attempts to infer (e.g.) Mach numbers from (e.g.) Faraday rotation measurements, without additional information regarding the thermodynamics of the plasma. However, our results suggest that this degeneracy can be broken by utilizing higher-order moments of observable distribution functions.

Many astrophysical systems encompass very large dynamical ranges in space and time, which are not accessible by direct numerical simulations. Thus, idealized subvolumes are often used to study small-scale effects including the dynamics of turbulence. These turbulent boxes require an artificial driving in order to mimic energy injection from large-scale processes. In this Letter, we show and quantify how the autocorrelation time of the driving and its normalization systematically change properties of an isothermal compressible magnetohydrodynamic flow in the sub- and supersonic regime and affect astrophysical observations such as Faraday rotation. For example, we find that $\delta$-in-time forcing with a constant energy injection leads to a steeper slope in kinetic energy spectrum and less efficient small-scale dynamo action. In general, we show that shorter autocorrelation times require more power in the acceleration field, which results in more power in compressive modes that weaken the anticorrelation between density and magnetic field strength. Thus, derived observables, such as the line-of-sight magnetic field from rotation measures, are systematically biased by the driving mechanism. We argue that $\delta$-in-time forcing is unrealistic and numerically unresolved, and conclude that special care needs to be taken in interpreting observational results based on the use of idealized simulations.

Magnetic fields, compressibility and turbulence are important factors in many terrestrial and astrophysical processes. While energy dynamics, i.e. how energy is transferred within and between kinetic and magnetic reservoirs, has been previously studied in the context of incompressible magnetohydrodynamic (MHD) turbulence, we extend shell-to-shell energy transfer analysis to the compressible regime. We derive four new transfer functions specifically capturing compressibility effects in the kinetic and magnetic cascade, and capturing energy exchange via magnetic pressure. To illustrate their viability, we perform and analyze four simulations of driven isothermal MHD turbulence in the sub- and supersonic regime with two different codes. On the one hand, our analysis reveals robust characteristics across regime and numerical method. For example, energy transfer between individual scales is local and forward for both cascades with the magnetic cascade being stronger than the kinetic one. Magnetic tension and magnetic pressure related transfers are less local and weaker than the cascades. We find no evidence for significant nonlocal transfer. On the other hand, we show that certain functions, e.g., the compressive component of the magnetic energy cascade, exhibit a more complex behavior that varies both with regime and numerical method. Having established a basis for the analysis in the compressible regime, the method can now be applied to study a broader parameter space.

We perform a suite of two- and three-dimensional magnetohydrodynamic (MHD) simulations with the Athena code of the non-driven Kelvin-Helmholtz instability in the subsonic, weak magnetic field limit. Focusing the analysis on the non-linear turbulent regime, we quantify energy transfer on a scale-by-scale basis and identify the physical mechanisms responsible for energy exchange by developing the diagnostic known as spectral energy transfer function analysis. At late times when the fluid is in a state of MHD turbulence, magnetic tension mediates the dominant mode of energy injection into the magnetic reservoir, whereby turbulent fluid motions twist and stretch the magnetic field lines. This generated magnetic energy turbulently cascades to smaller scales, while being exchanged backwards and forwards with the kinetic energy reservoir, until finally being dissipated. Incorporating explicit dissipation pushes the dissipation scale to larger scales than if the dissipation were entirely numerical. For scales larger than the dissipation scale, we show that the physics of energy transfer in decaying MHD turbulence is robust to numerical effects.

We carry out a series of local, vertically stratified shearing box simulations of protoplanetary disks that include ambipolar diffusion and a net vertical magnetic field. The ambipolar diffusion profiles we employ correspond to 30AU and 100AU in a minimum mass solar nebula (MMSN) disk model, which consists of a far-UV-ionized surface layer and low-ionization disk interior. These simulations serve as a follow up to Simon et al. (2013), in which we found that without a net vertical field, the turbulent stresses that result from the magnetorotational instability (MRI) are too weak to account for observed accretion rates. The simulations in this work show a very strong dependence of the accretion stresses on the strength of the background vertical field; as the field strength increases, the stress amplitude increases. For gas to magnetic pressure ratios of 1e4 and 1e5, we find accretion rates between 1e-8 and 1e-7 solar masses per year. These accretion rates agree with observational constraints, suggesting a vertical magnetic field strength between 60 and 200 microgauss at 30AU and 10 and 30 microgauss at 100AU in a MMSN disk. Furthermore, the stress has a non-negligible component due to a magnetic wind. For sufficiently strong vertical field strengths, MRI turbulence is quenched, and the flow becomes largely laminar, with accretion proceeding through large scale correlations in the radial and toroidal field components as well as through the magnetic wind. In all simulations, the presence of a low ionization region near the disk mid-plane, which we call the ambipolar damping zone, results in reduced stresses there.

We use local numerical simulations to investigate the strength and nature of magnetohydrodynamic (MHD) turbulence in the outer regions of protoplanetary disks, where ambipolar diffusion is the dominant non-ideal MHD effect. The simulations include vertical stratification and assume zero net vertical magnetic flux. We employ a super time-stepping technique to ameliorate the Courant restriction on the diffusive time step. We find that in idealized stratified simulations, with a spatially constant ambipolar Elsasser number Am, turbulence driven by the magnetorotational instability (MRI) behaves in a similar manner as in prior unstratified calculations. Turbulence dies away for Am < 1, and becomes progressively more vigorous as ambipolar diffusion is decreased. Near-ideal MHD behavior is recovered for Am > 1000. In the intermediate regime (10 < Am < 1000) ambipolar diffusion leads to substantial increases in both the period of the MRI dynamo cycle and the characteristic scales of magnetic field structures. To quantify the impact of ambipolar physics on disk accretion, we run simulations at 30 AU and 100 AU that include a vertical Am profile based upon far ultraviolet (FUV) ionized disk models. These models develop a vertically layered structure analogous to the Ohmic dead zone that is present at smaller radii. We find that, although the levels of surface turbulence can be strong (and consistent with constraints on turbulent line widths at these radii), the inferred accretion rates are at least an order of magnitude smaller than those observed in T Tauri stars. This discrepancy is very likely due to the assumption of zero vertical magnetic field in our simulations and suggests that vertical magnetic fields are essential for MRI-driven accretion in the outer regions of protoplanetary disks.

We study how the structure and variability of magnetohydrodynamic (MHD) turbulence in accretion discs converge with domain size. Our results are based on a series of vertically stratified local simulations, computed using the Athena code, that have fixed spatial resolution, but varying radial and azimuthal extent (from \Delta R = 0.5H to 16H, where H is the vertical scale height). We show that elementary local diagnostics of the turbulence, including the Shakura-Sunyaev {\alpha} parameter, the ratio of Maxwell stress to magnetic energy, and the ratio of magnetic to fluid stresses, converge to within the precision of our measurements for spatial domains of radial size Lx \geq 2H. We obtain {\alpha} = 0.02-0.03, consistent with recent results. Very small domains (Lx = 0.5H) return anomalous results, independent of spatial resolution. The convergence with domain size is only valid for a limited set of diagnostics: larger spatial domains admit the emergence of dynamically important mesoscale structures. In our largest simulations, the Maxwell stress shows a significant large scale non-local component, while the density develops long-lived axisymmetric perturbations (zonal flows) at the 20% level. Most strikingly, the variability of the disc in fixed-sized patches decreases strongly as the simulation volume increases. We find generally good agreement between our largest local simulations and global simulations with comparable spatial resolution. There is no direct evidence that the presence of curvature terms or radial gradients in global calculations materially affect the turbulence, except to perhaps introduce an outer radial scale for mesoscale structures. The demonstrated importance of mean magnetic fields, seen in both large local and global simulations implies that the growth and saturation of these fields is likely of critical importance for the evolution of accretion discs. (abridged)

We study the collimation of relativistic hydrodynamic jets by the pressure of an ambient medium in the limit where the jet interior has lost causal contact with its surroundings. For a jet with an ultrarelativistic equation of state and external pressure that decreases as a power of spherical radius, p \propto r^(-eta), the jet interior will lose causal contact when eta > 2. However, the outer layers of the jet gradually collimate toward the jet axis as long as eta < 4, leading to the formation of a shocked boundary layer. Assuming that pressure-matching across the shock front determines the shape of the shock, we study the resulting structure of the jet in two ways: first by assuming that the pressure remains constant across the shocked boundary layer and looking for solutions to the shock jump equations, and then by constructing self-similar boundary-layer solutions that allow for a pressure gradient across the shocked layer. We demonstrate that the constant-pressure solutions can be characterized by four initial parameters that determine the jet shape and whether the shock closes to the axis. We show that self-similar solutions for the boundary layer can be constructed that exhibit a monotonic decrease in pressure across the boundary layer from the contact discontinuity to the shock front, and that the addition of this pressure gradient in our initial model generally causes the shock front to move outwards, creating a thinner boundary layer and decreasing the tendency of the shock to close. We discuss trends based on the value of the pressure power-law index eta.

We present the results of a numerical investigation of current-driven instability in magnetized jets. Utilizing the well-tested, relativistic magnetohydrodynamic code Athena, we construct an ensemble of local, co-moving plasma columns in which initial radial force balance is achieved through various combinations of magnetic, pressure, and rotational forces. We then examine the resulting flow morphologies and energetics to determine the degree to which these systems become disrupted, the amount of kinetic energy amplification attained, and the non-linear saturation behaviors. Our most significant finding is that the details of initial force balance have a pronounced effect on the resulting flow morphology. Models in which the initial magnetic field is force-free deform, but do not become disrupted. Systems that achieve initial equilibrium by balancing pressure gradients and/or rotation against magnetic forces, however, tend to shred, mix, and develop turbulence. In all cases, the linear growth of current-driven instabilities is well-represented by analytic models. CDI-driven kinetic energy amplification is slower and saturates at a lower value in force-free models than in those that feature pressure gradients and/or rotation. In rotating columns, we find that magnetized regions undergoing rotational shear are driven toward equipartition between kinetic and magnetic energies. We show that these results are applicable for a large variety of physical parameters, but we caution that algorithmic decisions (such as choice of Riemann solver) can affect the evolution of these systems more than physically motivated parameters.

Sub-mm observations of protoplanetary disks now approach the acuity needed to measure the turbulent broadening of molecular lines. These measurements constrain disk angular momentum transport, and furnish evidence of the turbulent environment within which planetesimal formation takes place. We use local magnetohydrodynamic (MHD) simulations of the magnetorotational instability (MRI) to predict the distribution of turbulent velocities in low mass protoplanetary disks, as a function of radius and height above the mid-plane. We model both ideal MHD disks, and disks in which Ohmic dissipation results in a dead zone of suppressed turbulence near the mid-plane. Under ideal conditions, the disk mid-plane is characterized by a velocity distribution that peaks near v \simeq 0.1cs (where cs is the local sound speed), while supersonic velocities are reached at z > 3H (where H is the pressure scale height). Residual velocities of v \approx 0.01cs persist near the mid-plane in dead zones, while the surface layers remain active. Anisotropic variation of the linewidth with disk inclination is modest. We compare our MHD results to hydrodynamic simulations in which large-scale forcing is used to initiate similar turbulent velocities. We show that the qualitative trend of increasing v with height, seen in the MHD case, persists for forced turbulence and is likely a generic property of disk turbulence. Percent level determinations of v at different heights within the disk, or spatially resolved observations that probe the inner disk containing the dead zone region, are therefore needed to test whether the MRI is responsible for protoplanetary disk turbulence.

Grid-based magnetohydrodynamic (MHD) simulations have proven invaluable for the study of astrophysical accretion disks. However, the fact that angular momentum transport in disks is mediated by MHD turbulence (with structure down to very small scales) raises the concern that the properties of the modeled accretion disks are affected by the finite numerical resolution of the simulation. By implementing an orbital advection algorithm into the Athena code in cylindrical geometry, we have performed a set of global (but unstratified) Newtonian disk simulations extending up to resolutions previously unattained. We study the convergence of these models as a function of spatial resolution and initial magnetic field geometry. The usual viscosity parameter ($\alpha$) or the ratio of thermal-to-magnetic pressure ($\beta$) are found to be poor diagnostics of convergence, whereas the average tilt angle of the magnetic field in the $(r,\phi)$-plane is a very good diagnostic of convergence. We suggest that this is related to the saturation of the MHD turbulence via parasitic modes of the magnetorotational instability. Even in the case of zero-net magnetic flux, we conclude that our highest resolution simulations (with 32-zones and 64-zones per vertical scale height) have achieved convergence. Our global simulations reach resolutions comparable to those used in local, shearing box models of MHD disk turbulence. We find that the saturation predictors derived from local simulations correspond well to the instantaneous correlations between local flux and stress found in our global simulations. However, the conservation of magnetic flux implicit in local models is not realized in our global disks. Thus, the magnetic connectivity of an accretion disk represents physics that is truly global and cannot be captured in any ab-initio local model.

We use a global magnetohydrodynamic simulation of a geometrically thin accretion disk to investigate the locality and detailed structure of turbulence driven by the magnetorotational instability (MRI). The model disk has an aspect ratio $H / R \simeq 0.07$, and is computed using a higher-order Godunov MHD scheme with accurate fluxes. We focus the analysis on late times after the system has lost direct memory of its initial magnetic flux state. The disk enters a saturated turbulent state in which the fastest growing modes of the MRI are well-resolved, with a relatively high efficiency of angular momentum transport $< < \alpha > > \approx 2.5 \times 10^{-2}$. The accretion stress peaks at the disk midplane, above and below which exists a moderately magnetized corona with patches of superthermal field. By analyzing the spatial and temporal correlations of the turbulent fields, we find that the spatial structure of the magnetic and kinetic energy is moderately well-localized (with correlation lengths along the major axis of $2.5H$ and $1.5H$ respectively), and generally consistent with that expected from homogenous incompressible turbulence. The density field, conversely, exhibits both a longer correlation length and a long correlation time, results which we ascribe to the importance of spiral density waves within the flow. Consistent with prior results, we show that the mean local stress displays a well-defined correlation with the local vertical flux, and that this relation is apparently causal (in the sense of the flux stimulating the stress) during portions of a global dynamo cycle. We argue that the observed flux-stress relation supports dynamo models in which the structure of coronal magnetic fields plays a central role in determining the dynamics of thin-disk accretion.

We investigate the effect of shear viscosity and Ohmic resistivity on the magnetorotational instability (MRI) in vertically stratified accretion disks through a series of local simulations with the Athena code. First, we use a series of unstratified simulations to calibrate physical dissipation as a function of resolution and background field strength; the effect of the magnetic Prandtl number, Pm = viscosity/resistivity, on the turbulence is captured by ~32 grid zones per disk scale height, H. In agreement with previous results, our stratified disk calculations are characterized by a subthermal, predominately toroidal magnetic field that produces MRI-driven turbulence for |z| < 2 H. Above |z| = 2 H, magnetic pressure dominates and the field is buoyantly unstable. Large scale radial and toroidal fields are also generated near the mid-plane and subsequently rise through the disk. The polarity of this mean field switches on a roughly 10 orbit period in a process that is well-modeled by an alpha-omega dynamo. Turbulent stress increases with Pm but with a shallower dependence compared to unstratified simulations. For sufficiently large resistivity, on the order of cs H/1000, where cs is the sound speed, MRI turbulence within 2 H of the mid-plane undergoes periods of resistive decay followed by regrowth. This regrowth is caused by amplification of toroidal field via the dynamo. This process results in large amplitude variability in the stress on 10 to 100 orbital timescales, which may have relevance for partially ionized disks that are observed to have high and low accretion states.

We describe a new Godunov algorithm for relativistic magnetohydrodynamics (RMHD) that combines a simple, unsplit second order accurate integrator with the constrained transport (CT) method for enforcing the solenoidal constraint on the magnetic field. A variety of approximate Riemann solvers are implemented to compute the fluxes of the conserved variables. The methods are tested with a comprehensive suite of multidimensional problems. These tests have helped us develop a hierarchy of correction steps that are applied when the integration algorithm predicts unphysical states due to errors in the fluxes, or errors in the inversion between conserved and primitive variables. Although used exceedingly rarely, these corrections dramatically improve the stability of the algorithm. We present preliminary results from the application of these algorithms to two problems in RMHD: the propagation of supersonic magnetized jets, and the amplification of magnetic field by turbulence driven by the relativistic Kelvin-Helmholtz instability (KHI). Both of these applications reveal important differences between the results computed with Riemann solvers that adopt different approximations for the fluxes. For example, we show that use of Riemann solvers which include both contact and rotational discontinuities can increase the strength of the magnetic field within the cocoon by a factor of ten in simulations of RMHD jets, and can increase the spectral resolution of three-dimensional RMHD turbulence driven by the KHI by a factor of 2. This increase in accuracy far outweighs the associated increase in computational cost. Our RMHD scheme is publicly available as part of the Athena code.

We report on a global, three-dimensional GRMHD simulation of an accretion torus embedded in a large scale vertical magnetic field orbiting a Schwarzschild black hole. This simulation investigates how a large scale vertical field evolves within a turbulent accretion disk and whether global magnetic field configurations suitable for launching jets and winds can develop. We find that a "coronal mechanism" of magnetic flux motion, which operates largely outside the disk body, dominates global flux evolution. In this mechanism, magnetic stresses driven by orbital shear create large-scale half-loops of magnetic field that stretch radially inward and then reconnect, leading to discontinuous jumps in the location of magnetic flux. In contrast, little or no flux is brought in directly by accretion within the disk itself. The coronal mechanism establishes a dipole magnetic field in the evacuated funnel around the orbital axis with a field intensity regulated by a combination of the magnetic and gas pressures in the inner disk. These results prompt a reevaluation of previous descriptions of magnetic flux motion associated with accretion. Local pictures are undercut by the intrinsically global character of magnetic flux. Formulations in terms of an "effective viscosity" competing with an "effective resistivity" are undermined by the nonlinearity of of the magnetic dynamics and the fact that the same turbulence driving mass motion (traditionally identified as "viscosity") can alter magnetic topology.

(abridged) We apply a second-order Godunov code, Athena, to studies of the magnetorotational instability using unstratified shearing box simulations with a uniform net vertical field and a sinusoidally varying zero net vertical field. The Athena results agree well with similar studies that used different numerical algorithms. We conduct analyses to study the flow of energy from differential rotation to turbulent fluctuations to thermalization. A study of the temporal correlation between the time derivatives of volume-averaged energy components shows that energy injected into turbulent fluctuations dissipates on a timescale of $\Omega^{-1}$, where $\Omega$ is the orbital frequency of the local domain. Magnetic dissipation dominates over kinetic dissipation, although not by as great a factor as the ratio of magnetic to kinetic energy. We Fourier-transform the magnetic and kinetic energy evolution equations and, using the assumption that the time-averaged energies are constant, determine the level of numerical dissipation as a function of length scale and resolution. By modeling numerical dissipation as if it were physical in origin, we characterize numerical resistivity and viscosity in terms of effective Reynolds and Prandtl numbers. The resulting effective magnetic Prandtl number is $\sim 2$, independent of resolution or initial field geometry. MRI simulations with effective Reynolds and Prandtl numbers determined by numerical dissipation are not equivalent to those where these numbers are set by physical resistivity and viscosity. These results serve, then, as a baseline for future shearing box studies where dissipation is controlled by the inclusion of explicit viscosity and resistivity.

General Relativistic (GR) Magnetohydrodynamic (MHD) simulations of black hole accretion find significant magnetic stresses near and inside the innermost stable circular orbit (ISCO), suggesting that such flows could radiate in a manner noticeably different from the prediction of the standard model, which assumes that there are no stresses in that region. We provide estimates of how phenomenologically interesting parameters like the ``radiation edge", the innermost ring of the disc from which substantial thermal radiation escapes to infinity, may be altered by stresses near the ISCO. These estimates are based on data from a large number of three-dimensional GRMHD simulations combined with GR ray-tracing. For slowly spinning black holes ($a/M<0.9$), the radiation edge lies well inside where the standard model predicts, particularly when the system is viewed at high inclination. For more rapidly spinning black holes, the contrast is smaller. At fixed total luminosity, the characteristic temperature of the accretion flow increases between a factor of $1.2-2.4$ over that predicted by the standard model, whilst at fixed mass accretion rate, there is a corresponding enhancement of the accretion luminosity which may be anywhere from tens of percent to order unity. When all these considerations are combined, we find that, for fixed black hole mass, luminosity, and inclination angle, our uncertainty in the characteristic temperature of the radiation reaching distant observers due to uncertainty in dissipation profile (around a factor of 3) is {\it greater} than the uncertainty due to a complete lack of knowledge of the black hole's spin (around a factor of 2) and furthermore that spin estimates based on the stress-free inner boundary condition provide an upper limit to $a/M$.

Because the magneto-rotational instability is capable of exponentially amplifying weak preexisting magnetic fields, it might be hoped that the character of the magnetic field in accretion disks is independent of the nature of the seed field. However, the divergence-free nature of magnetic fields in highly conducting fluids ensures that their large-scale topology is preserved, no matter how greatly the field intensity is changed. By performing global two-dimensional and three-dimensional general relativistic magnetohydrodynamic disk simulations with several different topologies for the initial magnetic field, we explore the degree to which the character of the flows around black holes depends on the initial topology. We find that while the qualitative properties of the accretion flow are nearly independent of field topology, jet-launching is very sensitive to it: a sense of vertical field consistent for at least an inner disk inflow time is essential to the support of strong jets.

Simulations of black hole accretion have shown that magnetic stresses are present near and inside the innermost stable circular orbit (ISCO). This finding suggests that such flows may be more luminous than predicted by the standard accretion disk model. Here we apply a prescription for heat dissipation within the simulated accretion flows to estimate their implied radiative efficiency. We assume that dissipation is proportional to the current density squared, and find that the resulting azimuthally-averaged and shell-integrated radial profile is well-matched to the radial heat dissipation profile of the standard disk model for the region outside the ISCO, particularly when it is adjusted to account for additional stress at the ISCO. In contrast to the standard model, however, the dissipation profile derived from the current density continues past the ISCO and through the plunging region. The total predicted dissipation rate is between $\simeq 30%$ and $\simeq 100%$ greater than that predicted by the standard model, depending on the black hole spin. Most of the additional dissipation takes place just outside the ISCO. To predict luminosities, we assume instantaneous radiation and zero optical depth, but allow for photon capture. The net radiative efficiency seen by a distant observer is increased relative to the standard model by $\simeq 25%$--80%, with the largest fractional increase for intermediate black hole spins because the increase in dissipation from enhanced stress that occurs for rapid spin is partially offset by the increased likelihood that the additional photons will be captured by the hole.

We describe a new approach to calculating photon trajectories and gravitational lensing effects in the strong gravitational field of the Kerr black hole. These techniques are applied to explore both the imaging and spectral properties of photons that perform multiple orbits of the central mass before escaping to infinity. Viewed at large inclinations, these higher order photons contribute $\sim 20 %$ of the total luminosity of the system for a Schwarzschild hole, whilst for an extreme Kerr black hole this fraction rises to $\sim 60 %$. In more realistic models these photons will be re-absorbed by the disc at large distances from the hole, but this returning radiation could provide a physical mechanism to resolve the discrepancy between the predicted and observed optical/UV colours in AGN. Conversely, at low inclinations, higher order images re-intercept the disc plane close to the black hole, so need not be absorbed by the disc if this is within the plunging region. These photons form a bright ring carrying approximately 10% of the total disc luminosity for a Schwarzchild black hole. The spatial separation between the inner edge of the disc and the ring is similar to the size of the event horizon. This is resolvable for supermassive black holes with proposed X-ray interferometery missions such as MAXIM, so has the potential to provide an observational test of strong field gravity.

Spacetime in the vicinity of an event horizon can be probed using observations which explore the dynamics of the accretion disc. Many high energy theories of gravity lead to modifications of the near horizon regime, potentially providing a testing ground for these theories. In this paper, we explore the impact of braneworld gravity on this region by formulating a method of deriving the general behaviour of the as yet unknown braneworld black hole solution. We use simple bounds to constrain the solution close to the horizon.

We describe a new code which can accurately calculate the relativistic effects which distort the emission from an accretion disc around a black hole. We compare our results for a disk which extends from the innermost stable orbit to $20r_{g}$ in both Schwarzschild and maximal ($a=0.998$) Kerr spacetimes with the two line profile codes which are on general release in the XSPEC spectral fitting package. These models generally give a very good description of the relativistic smearing of the line for this range of radii. However, these models have some limitations. In particular we show that the assumed form of the {\em angular} emissivity law (limb darkening or brightening) can make significant changes to the derived line profile where lightbending is important. This is {\em always} the case for extreme Kerr spacetimes or high inclination systems, where the observed line is produced from a very large range of different emitted angles. In these situations the assumed angular emissivity can affect the derived {\em radial} emissivity. The line profile is not simply determined by the well defined (but numerically difficult) physical effects of strong gravity, but is also dependent on the poorly known astrophysics of the disc emission.

Observations of fluorescent iron lines from accreting black holes provide one of the best tests of strong field gravity available to date, and the only current observational tool to probe black hole spacetime. However, the two most widely used models for spectral fitting (diskline, laor) are over a decade old and have significant limitations. We present a new code for calculating these effects which will be incorporated within the XSPEC package