Context. Teegarden's Star is the brightest and one of the nearest ultra-cool dwarfs in the solar neighbourhood. For its late spectral type (M7.0V), the star shows relatively little activity and is a prime target for near-infrared radial velocity surveys such as CARMENES. Aims. As part of the CARMENES search for exoplanets around M dwarfs, we obtained more than 200 radial-velocity measurements of Teegarden's Star and analysed them for planetary signals. Methods. We find periodic variability in the radial velocities of Teegarden's Star. We also studied photometric measurements to rule out stellar brightness variations mimicking planetary signals. Results. We find evidence for two planet candidates, each with $1.1M_\oplus$ minimum mass, orbiting at periods of 4.91 and 11.4 d, respectively. No evidence for planetary transits could be found in archival and follow-up photometry. Small photometric variability is suggestive of slow rotation and old age. Conclusions. The two planets are among the lowest-mass planets discovered so far, and they are the first Earth-mass planets around an ultra-cool dwarf for which the masses have been determined using radial velocities.

The CARMENES radial velocity (RV) survey is observing 324 M dwarfs to search for any orbiting planets. In this paper, we present the survey sample by publishing one CARMENES spectrum for each M dwarf. These spectra cover the wavelength range 520--1710nm at a resolution of at least $R > 80,000$, and we measure its RV, H$\alpha$ emission, and projected rotation velocity. We present an atlas of high-resolution M-dwarf spectra and compare the spectra to atmospheric models. To quantify the RV precision that can be achieved in low-mass stars over the CARMENES wavelength range, we analyze our empirical information on the RV precision from more than 6500 observations. We compare our high-resolution M-dwarf spectra to atmospheric models where we determine the spectroscopic RV information content, $Q$, and signal-to-noise ratio. We find that for all M-type dwarfs, the highest RV precision can be reached in the wavelength range 700--900nm. Observations at longer wavelengths are equally precise only at the very latest spectral types (M8 and M9). We demonstrate that in this spectroscopic range, the large amount of absorption features compensates for the intrinsic faintness of an M7 star. To reach an RV precision of 1ms$^{-1}$ in very low mass M dwarfs at longer wavelengths likely requires the use of a 10m class telescope. For spectral types M6 and earlier, the combination of a red visual and a near-infrared spectrograph is ideal to search for low-mass planets and to distinguish between planets and stellar variability. At a 4m class telescope, an instrument like CARMENES has the potential to push the RV precision well below the typical jitter level of 3-4ms$^{-1}$.

Context: The main goal of the CARMENES survey is to find Earth-mass planets around nearby M-dwarf stars. Seven M-dwarfs included in the CARMENES sample had been observed before with HIRES and HARPS and either were reported to have one short period planetary companion (GJ15A, GJ176, GJ436, GJ536 and GJ1148) or are multiple planetary systems (GJ581 and GJ876). Aims: We aim to report new precise optical radial velocity measurements for these planet hosts and test the overall capabilities of CARMENES. Methods: We combined our CARMENES precise Doppler measurements with those available from HIRES and HARPS and derived new orbital parameters for the systems. Bona-fide single planet systems are fitted with a Keplerian model. The multiple planet systems were analyzed using a self-consistent dynamical model and their best fit orbits were tested for long-term stability. Results: We confirm or provide supportive arguments for planets around all the investigated stars except for GJ15A, for which we find that the post-discovery HIRES data and our CARMENES data do not show a signal at 11.4 days. Although we cannot confirm the super-Earth planet GJ15Ab, we show evidence for a possible long-period ($P_{\rm c}$ = 7025$_{-629}^{+972}$ d) Saturn-mass ($m_{\rm c} \sin i$ = 51.8$_{-5.8}^{+5.5}M_\oplus$) planet around GJ15A. In addition, based on our CARMENES and HIRES data we discover a second planet around GJ1148, for which we estimate a period $P_{\rm c}$ = 532.6$_{-2.5}^{+4.1}$ d, eccentricity $e_{\rm c}$ = 0.34$_{-0.06}^{+0.05}$ and minimum mass $m_{\rm c} \sin i$ = 68.1$_{-2.2}^{+4.9}M_\oplus$. Conclusions: The CARMENES optical radial velocities have similar precision and overall scatter when compared to the Doppler measurements conducted with HARPS and HIRES. We conclude that CARMENES is an instrument that is up to the challenge of discovering rocky planets around low-mass stars.

We report on the first star discovered to host a planet detected by radial velocity (RV) observations obtained within the CARMENES survey for exoplanets around M dwarfs. HD 147379 ($V = 8.9$ mag, $M = 0.58 \pm 0.08$ M$_{\odot}$), a bright M0.0V star at a distance of 10.7 pc, is found to undergo periodic RV variations with a semi-amplitude of $K = 5.1\pm0.4$ m s$^{-1}$ and a period of $P = 86.54\pm0.06$ d. The RV signal is found in our CARMENES data, which were taken between 2016 and 2017, and is supported by HIRES/Keck observations that were obtained since 2000. The RV variations are interpreted as resulting from a planet of minimum mass $m_{\rm p}\sin{i} = 25 \pm 2$ M$_{\oplus}$, 1.5 times the mass of Neptune, with an orbital semi-major axis $a = 0.32$ au and low eccentricity ($e < 0.13$). HD 147379b is orbiting inside the temperate zone around the star, where water could exist in liquid form. The RV time-series and various spectroscopic indicators show additional hints of variations at an approximate period of 21.1d (and its first harmonic), which we attribute to the rotation period of the star.

Massive spectroscopic survey are becoming trendy in astrophysics and cosmology, as they can address new fundamental knowledge such as Galactic Archaeology and probe the nature of the mysterious Dark Energy. To enable massive spectroscopic surveys, new technology are being developed to place thousands of optical fibers at a given position on a focal plane. These technology needs to be: 1) accurate, with micrometer positional accuracy; 2) fast to minimize overhead; 3) robust to minimize failure; and 4) low cost. In this paper we present the development of a new 8-mm in diameter fiber positionner robot using two 4mm DC-brushless gearmotors, developed in the context of the Dark Energy Spectroscopic Instrument. This development was conducted by a Spanish-Swiss (ES-CH) team led by the Instituto de F\'isica Te\'orica (UAM-CSIC) and the Laboratoire d'Astrophysique (EPFL), in collaboration with the AVS company in Spain and the Faulhaber group (MPS & FAULHABER-MINIMOTOR) in Switzerland.

BigBOSS is a Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a wide-area galaxy and quasar redshift survey over 14,000 square degrees. It has been conditionally accepted by NOAO in response to a call for major new instrumentation and a high-impact science program for the 4-m Mayall telescope at Kitt Peak. The BigBOSS instrument is a robotically-actuated, fiber-fed spectrograph capable of taking 5000 simultaneous spectra over a wavelength range from 340 nm to 1060 nm, with a resolution R = 3000-4800. Using data from imaging surveys that are already underway, spectroscopic targets are selected that trace the underlying dark matter distribution. In particular, targets include luminous red galaxies (LRGs) up to z = 1.0, extending the BOSS LRG survey in both redshift and survey area. To probe the universe out to even higher redshift, BigBOSS will target bright [OII] emission line galaxies (ELGs) up to z = 1.7. In total, 20 million galaxy redshifts are obtained to measure the BAO feature, trace the matter power spectrum at smaller scales, and detect redshift space distortions. BigBOSS will provide additional constraints on early dark energy and on the curvature of the universe by measuring the Ly-alpha forest in the spectra of over 600,000 2.2 < z < 3.5 quasars. BigBOSS galaxy BAO measurements combined with an analysis of the broadband power, including the Ly-alpha forest in BigBOSS quasar spectra, achieves a FOM of 395 with Planck plus Stage III priors. This FOM is based on conservative assumptions for the analysis of broad band power (kmax = 0.15), and could grow to over 600 if current work allows us to push the analysis to higher wave numbers (kmax = 0.3). BigBOSS will also place constraints on theories of modified gravity and inflation, and will measure the sum of neutrino masses to 0.024 eV accuracy.

We present an optimized algorithm for assigning fibers to targets in next-generation fiber-fed multi-object spectrographs. The method, that we named draining algorithm, ensures that the maximum number of targets in a given target field is observed in the first few tiles. Using randomly distributed targets and mock galaxy catalogs we have estimated that the gain provided by the draining algorithm as compared to a random assignment can be as much as 2% for the first tiles. This would imply for a survey like BigBOSS saving for observation several hundred thousand objects or, alternatively, reducing the covered area in ~350 sq. deg. An important advantage of this method is that the fiber collision problem can be solved easily and in an optimal way. We also discuss additional optimizations of the fiber positioning process. In particular, we show that allowing for rotation of the focal plane can improve the efficiency of the process in ~3.5-4.5% even if only small adjustments are permitted (up to 2 deg). For instruments that allow large rotations of the focal plane the expected gain increases to ~5-6%. These results, therefore, strongly support focal plane rotation in future spectrographs, as far as the efficiency of the fiber positioning process is concerned. Finally, we discuss on the implications of our optimizations and provide some basic hints for an optimal survey strategy based on the number of targets per positioner.

XMS is a multi-channel wide-field spectrograph designed for the prime focus of the 3.5m Calar-Alto telescope. The instrument is composed by four quadrants, each of which contains a spectrograph channel. An innovative mechanical design -at concept/preliminary stage- has been implemented to: 1) Minimize the separation between the channels to achieve maximal filling factor; 2) Cope with the very constraining space and mass overall requirements; 3) Achieve very tight alignment tolerances; 4) Provide lens self-centering under large temperature excursions; 5) Provide masks including 4000 slits (edges thinner than 100\mu). An overview of this extremely challenging mechanical design is here presented.

CARMENES has been proposed as a next-generation instrument for the 3.5m Calar Alto Telescope. Its objective is finding habitable exoplanets around M dwarfs through radial velocity measurements (m/s level) in the near-infrared. Consequently, the NIR spectrograph is highly constraint regarding thermal/mechanical requirements. As a first approach, the thermal stability has been limited to \pm 0.01K (within year period) over a working temperature of 243K. This can be achieved by means of several temperature-controlled rooms. The options considered to minimise the complexity of the thermal design are here presented, as well as the transient-state thermal analyses realised to make the best choice.

Fiber-fed spectrographs dedicated to observing massive portions of the sky are increasingly being more demanded within the astronomical community. For all the fiber-fed instruments, the primordial and common problem is the positioning of the fiber ends, which must match the position of the objects of a target field on the sky. Amongst the different approaches found in the state of the art, actuator arrays are one of the best. Indeed, an actuator array is able to position all the fiber heads simultaneously, thus making the reconfiguration time extremely short and the instrument efficiency high. The SIDE group (see http://side.iaa.es) at the Instituto de Astrof\'isica de Andaluc\'ia, together with the industrial company AVS and the University of Barcelona, has been developing an actuator suitable for a large and scalable array. A real-scale prototype has been built and tested in order to validate its innovative design concept, as well as to verify the fulfillment of the mechanical requirements. The present article describes both the concept design and the test procedures and conditions. The main results are shown and a full justification of the validity of the proposed concept is provided.

CARMENES, Calar Alto high-Resolution search for M dwarfs with Exo-earths with a Near-infrared Echelle Spectrograph, is a study for a next-generation instrument for the 3.5m Calar Alto Telescope to be designed, built, integrated, and operated by a consortium of nine German and Spanish institutions. Our main objective is finding habitable exoplanets around M dwarfs, which will be achieved by radial velocity measurements on the m/s level in the near-infrared, where low-mass stars emit the bulk of their radiation.