The optics of a number of future X-ray telescopes will have very long focal lengths (10 - 20 m), and will consist of a number of nested/stacked thin, grazing-incidence mirrors. The optical quality characterization of a real mirror can be obtained via profile metrology, and the Point Spread Function of the mirror can be derived via one of the standard computation methods. However, in practical cases it can be difficult to access the optical surfaces of densely stacked mirror shells, after they have been assembled, using the widespread metrological tools. For this reason, the assessment of the imaging resolution of a system of mirrors is better obtained via a direct, full-illumination test in X-rays. If the focus cannot be reached, an intra-focus test can be performed, and the image can be compared with the simulation results based on the metrology, if available. However, until today no quantitative information was extracted from a full-illumination, intra-focal exposure. In this work we show that, if the detector is located at an optimal distance from the mirror, the intensity variations of the intra-focal, full-illumination image in single reflection can be used to reconstruct the profile of the mirror surface, without the need of a wavefront sensor. The Point Spread Function can be subsequently computed from the reconstructed mirror shape. We show the application of this method to an intra-focal (8 m distance from mirror) test performed at PANTER on an optical module prototype made of hot-slumped glass foils with a 20 m focal length, from which we could derive an expected imaging quality near 16 arcsec HEW.

The Hot Slumping Technology is under development by several research groups in the world for the realization of grazing-incidence segmented mirrors for X-ray astronomy, based on thin glass plates shaped over a mould at temperatures above the transformation point. The performed thermal cycle and related operations might have effects on the strength characteristics of the glass, with consequences on the structural design of the elemental optical modules and consecutively on the entire X-ray optic for large astronomical missions like IXO and ATHENA. The mechanical strength of glass plates after they underwent the slumping process was tested through destructive double-ring tests in the context of a study performed by the Astronomical Observatory of Brera with the collaboration of Stazione Sperimentale del Vetro and BCV Progetti. The entire study has been realized on more than 200 D263 Schott borosilicate glass specimens of dimension 100 mm x 100 mm and thickness 0.4 mm, either flat or bent at a Radius of Curvature of 1000 mm through the particular pressure assisted hot slumping process developed by INAF-OAB. The collected experimental data have been compared to non-linear FEM analyses and treated with Weibull statistic to assess the current IXO glass X-ray telescope design, in terms of survival probability, when subject to static and acoustic loads characteristic of the launch phase. The paper describes the activities performed and presents the obtained results.

The latest all-sky survey in hard X-ray band was performed by the HEAO-1 satellite (13-80 keV) with an angular resolution of 24x48 arcmin. A diffuse hard X-Ray background (HXB) was detected between 3 and 50 keV. The main scientific goal of In.XS is to resolve a large fraction of this HXB into individual sources. As no distortion by Compton up-scattering is seen in the spectrum of the microwave background, the hard X-ray background is believed to be mainly due to point sources. Type I Active Galactic Nuclei (AGN) have softer X-ray spectra than the hard X-ray background, so other sources must be considered, like faint Type II or absorbed AGN. These could be distinguished through hard X-ray spectroscopic or hardness ratio observations. Here we present In.XS - a mission concept designed to conduct the first imaging all-sky hard X-ray (2-80 keV) survey. The angular resolution of nearly 1 arcmin and good sensitivity at high energies is provided by the latest multilayer focussing mirrors, with semiconductor-based (GaAs) arrays of detectors. We also describe the mission operations, and how the all-sky survey will be complemented by follow-up pointed observations of selected fields. The good angular resolution will allow correlations and identification with objects seen at other wavelengths. In addition, since a large fraction of the Type II AGN luminosity is emitted in the hard X-ray band, this survey will provide a large unbiased sample of the AGN population. This may provide constraints on AGN evolution through the possible observation of a turnover in deep field source statistics.

XEUS is under study by ESA as part of the Horizon 2000+ program to utilize the International Space Station (ISS) for astronomical applications. XEUS will be a long-term X-ray observatory with an initial mirror area of 6m2 at 1 keV that will be grown to 30m2 following a visit to the ISS. The 1 keV spatial resolution is expected to be 2-5'' HEW. XEUS will consist of separate detector and mirror spacecraft aligned by active control to provide a focal length of 50m. A new detector spacecraft, complete with the next generation of instruments, will also be added after visiting the ISS. The limiting sensitivity will then be ~4 10-18 erg/cm2/s - around 250 times better than XMM, allowing XEUS to study the properties of the hot baryons and dark matter at high redshift.

We report on a BeppoSAX Concentrator Spectrometer observation of the super-soft source (SSS) CAL87. The X-ray emission in SSS is believed to arise from nuclear burning of accreted material on the surface of a white dwarf (WD). An absorbed blackbody spectral model gives a chi^2_v of 1.18 and a temperature of 42 +/- ^13 _11 eV. However, the derived luminosity and radius are greater than the Eddington limit and radius of a WD. Including an O viii edge at 0.871 keV gives a significantly better fit (at > 95% confidence) and results in more realistic values of the source luminosity and radius. We also fit WD atmosphere models to the CAL87 spectrum. These also give reasonable bolometric luminosities and radii in the ranges 2.7-4.8 10^{36} erg/s and 8-20 10^7 cm, respectively. These results support the view that the X-ray emission from CAL87 results from nuclear burning in the atmosphere of a WD.