EarthFinder is a NASA Astrophysics Probe mission concept selected for study as input to the 2020 Astrophysics National Academies Decadal Survey. The EarthFinder concept is based on a dramatic shift in our understanding of how PRV measurements should be made. We propose a new paradigm which brings the high precision, high cadence domain of transit photometry as demonstrated by Kepler and TESS to the challenges of PRV measurements at the cm/s level. This new paradigm takes advantage of: 1) broad wavelength coverage from the UV to NIR which is only possible from space to minimize the effects of stellar activity; 2) extremely compact, highly stable, highly efficient spectrometers (R>150,000) which require the diffraction-limited imaging possible only from space over a broad wavelength range; 3) the revolution in laser-based wavelength standards to ensure cm/s precision over many years; 4) a high cadence observing program which minimizes sampling-induced period aliases; 5) exploiting the absolute flux stability from space for continuum normalization for unprecedented line-by-line analysis not possible from the ground; and 6) focusing on the bright stars which will be the targets of future imaging missions so that EarthFinder can use a ~1.5 m telescope.

We present the discovery of 7 new planets and 8 planet candidates around subgiant stars, as additions to the known sample of planets around "retired A stars" (Johnson et al. 2006). Among these are the possible first 3-planet systems around subgiant stars, HD 163607 and HD 4917. Additionally, we present calculations of possible transit times, durations, depths, and probabilities for all known planets around subgiant (3 < log g < 4) stars, focused on possible transits during the TESS mission. While most have transit probabilities of 1-2%, we find that there are 3 planets with transit probabilities > 9%.

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since July 2014. This paper describes the second data release from this phase, and the fourteenth from SDSS overall (making this, Data Release Fourteen or DR14). This release makes public data taken by SDSS-IV in its first two years of operation (July 2014-2016). Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey (eBOSS); the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data driven machine learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS website (www.sdss.org) has been updated for this release, and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020, and will be followed by SDSS-V.

We present a comparison of parallaxes and radii from asteroseismology and Gaia DR1 (TGAS) for 2200 Kepler stars spanning from the main sequence to the red giant branch. We show that previously identified offsets between TGAS parallaxes and distances derived from asteroseismology and eclipsing binaries have likely been overestimated for parallaxes <~ 5-10 mas (~ 90-98% of the TGAS sample). The observed differences in our sample can furthermore be partially compensated by adopting a hotter Teff scale (such as the infrared flux method) instead of spectroscopic temperatures for dwarfs and subgiants. Residual systematic differences are at the ~ 2% level in parallax across three orders of magnitude. We use TGAS parallaxes to empirically demonstrate that asteroseismic radii are accurate to ~ 5% or better for stars between ~ 0.8-8 Rsun. We find no significant offset for main-sequence (<~ 1.5 Rsun) and low-luminosity RGB stars (~ 3-8 Rsun), but seismic radii appear to be systematically underestimated by ~5% for subgiants (~ 1.5-3 Rsun). We find no systematic errors as a function of metallicity between [Fe/H] ~ -0.8 to +0.4 dex, and show tentative evidence that corrections to the scaling relation for the large frequency separation (Dnu) improve the agreement with TGAS for RGB stars. Finally, we demonstrate that beyond ~ 3 kpc asteroseismology will provide more precise distances than end-of-mission Gaia data, highlighting the synergy and complementary nature of Gaia and asteroseismology for studying galactic stellar populations.

In the updated APOGEE-Kepler catalog, we have asteroseismic and spectroscopic data for over 3000 first ascent red giants. Given the size and accuracy of this sample, these data offer an unprecedented test of the accuracy of stellar models on the post-main-sequence. When we compare these data to theoretical predictions, we find a metallicity dependent temperature offset with a slope of around 100 K per dex in metallicity. We find that this effect is present in all model grids tested and that theoretical uncertainties in the models, correlated spectroscopic errors, and shifts in the asteroseismic mass scale are insufficient to explain this effect. Stellar models can be brought into agreement with the data if a metallicity dependent convective mixing length is used, with $ \Delta\alpha_{\rm ML, YREC} \sim 0.2$ per dex in metallicity, a trend inconsistent with the predictions of three dimensional stellar convection simulations. If this effect is not taken into account, isochrone ages for red giants from the Gaia data will be off by as much as a factor of 2 even at modest deviations from solar metallicity ([Fe/H]=$-$0.5).

The determination of exoplanet properties and occurrence rates using Kepler data critically depends on our knowledge of the fundamental properties (such as temperature, radius and mass) of the observed stars. We present revised stellar properties for 197,096 Kepler targets observed between Quarters 1-17 (Q1-17), which were used for the final transiting planet search run by the Kepler Mission (Data Release 25, DR25). Similar to the Q1--16 catalog by Huber et al. the classifications are based on conditioning published atmospheric parameters on a grid of Dartmouth isochrones, with significant improvements in the adopted methodology and over 29,000 new sources for temperatures, surface gravities or metallicities. In addition to fundamental stellar properties the new catalog also includes distances and extinctions, and we provide posterior samples for each stellar parameter of each star. Typical uncertainties are ~27% in radius, ~17% in mass, and ~51% in density, which is somewhat smaller than previous catalogs due to the larger number of improved logg constraints and the inclusion of isochrone weighting when deriving stellar posterior distributions. On average, the catalog includes a significantly larger number of evolved solar-type stars, with an increase of 43.5% in the number of subgiants. We discuss the overall changes of radii and masses of Kepler targets as a function of spectral type, with particular focus on exoplanet host stars.

In Bastien et al. (2013) we found that high quality light curves, such as those obtained by Kepler, may be used to measure stellar surface gravity via granulation-driven light curve "flicker". Here, we update and extend the relation originally presented in Bastien et al. (2013) after calibrating flicker against a more robust set of asteroseismically derived surface gravities. We describe in detail how we extract the flicker signal from the light curves, including how we treat phenomena, such as exoplanet transits and shot noise, that adversely affect the measurement of flicker. We examine the limitations of the technique, and, as a result, we now provide an updated treatment of the flicker-based logg error. We briefly highlight further applications of the technique, such as astrodensity profiling or its use in other types of stars with convective outer layers. We discuss potential uses in current and upcoming space-based photometric missions. Finally, we supply flicker-based logg values, and their uncertainties, for 27 628 Kepler stars not identified as transiting-planet hosts, with 4500<teff<7150 K, 2.5<logg<4.6, Kepler magnitude <13.5, and overall photometric amplitudes <10 parts per thousand.

The Kepler mission has yielded a large number of planet candidates from among the Kepler Objects of Interest (KOIs), but spectroscopic follow-up of these relatively faint stars is a serious bottleneck in confirming and characterizing these systems. We present motivation and survey design for an ongoing project with the SDSS-III multiplexed APOGEE near-infrared spectrograph to monitor hundreds of KOI host stars. We report some of our first results using representative targets from our sample, which include current planet candidates that we find to be false positives, as well as candidates listed as false positives that we do not find to be spectroscopic binaries. With this survey, KOI hosts are observed over ~20 epochs at a radial velocity precision of 100-200 m/s. These observations can easily identify a majority of false positives caused by physically-associated stellar or substellar binaries, and in many cases, fully characterize their orbits. We demonstrate that APOGEE is capable of achieving RV precision at the 100-200 m/s level over long time baselines, and that APOGEE's multiplexing capability makes it substantially more efficient at identifying false positives due to binaries than other single-object spectrographs working to confirm KOIs as planets. These APOGEE RVs enable ancillary science projects, such as studies of fundamental stellar astrophysics or intrinsically rare substellar companions. The coadded APOGEE spectra can be used to derive stellar properties (T_eff, log(g)) and chemical abundances of over a dozen elements to probe correlations of planet properties with individual elemental abundances.

Stellar surface processes represent a fundamental limit to the detection of extrasolar planets with the currently most heavily-used techniques. As such, considerable effort has gone into trying to mitigate the impact of these processes on planet detection, with most studies focusing on magnetic spots. Meanwhile, high-precision photometric planet surveys like CoRoT and Kepler have unveiled a wide variety of stellar variability at previously inaccessible levels. We demonstrate that these newly revealed variations are not solely magnetically driven but also trace surface convection through light curve "flicker." We show that "flicker" not only yields a simple measurement of surface gravity with a precision of ~0.1 dex, but it may also improve our knowledge of planet properties, enhance radial velocity planet detection and discovery, and provide new insights into stellar evolution.

In most theories of planet formation, the snow-line represents a boundary between the emergence of the interior rocky planets and the exterior ice giants. The wide separation of the snow-line makes the discovery of transiting worlds challenging, yet transits would allow for detailed subsequent characterization. We present the discovery of Kepler-421b, a Uranus-sized exoplanet transiting a G9/K0 dwarf once every 704.2 days in a near-circular orbit. Using public Kepler photometry, we demonstrate that the two observed transits can be uniquely attributed to the 704.2 day period. Detailed light curve analysis with BLENDER validates the planetary nature of Kepler-421b to >4 sigmas confidence. Kepler-421b receives the same insolation as a body at ~2AU in the Solar System and for a Uranian albedo would have an effective temperature of ~180K. Using a time-dependent model for the protoplanetary disk, we estimate that Kepler-421b's present semi-major axis was beyond the snow-line after ~3Myr, indicating that Kepler-421b may have formed at its observed location.

Most extrasolar planets have been detected by their influence on their parent star, typically either gravitationally (the Doppler method) or by the small dip in brightness as the planet blocks a portion of the star (the transit method). Therefore, the accuracy with which we know the masses and radii of extrasolar planets depends directly on how well we know those of the stars, the latter usually determined from the measured stellar surface gravity, logg. Recent work has demonstrated that the short-timescale brightness variations ("flicker") of stars can be used to measure logg to a high accuracy of ~0.1-0.2 dex (Bastien et al. 2013). Here, we use flicker measurements of 289 bright (Kepmag<13) candidate planet-hosting stars with Teff=4500-6650 K to re-assess the stellar parameters and determine the resulting impact on derived planet properties. This re-assessment reveals that for the brightest planet-host stars, an astrophysical bias exists that contaminates the stellar sample with evolved stars: nearly 50% of the bright planet-host stars are subgiants. As a result, the stellar radii, and hence the radii of the planets orbiting these stars, are on average 20-30% larger than previous measurements had suggested.

Variability in the time series brightness of a star on a timescale of 8 hours, known as 'flicker', has been previously demonstrated to serve as a proxy for the surface gravity of a star by Bastien et al. (2013). Although surface gravity is crucial for stellar classification, it is the mean stellar density which is most useful when studying transiting exoplanets, due to its direct impact on the transit light curve shape. Indeed, an accurate and independent measure of the stellar density can be leveraged to infer subtle properties of a transiting system, such as the companion's orbital eccentricity via asterodensity profiling. We here calibrate flicker to the mean stellar density of 439 Kepler targets with asteroseismology, allowing us to derive a new empirical relation given by $\log_{10}(\rho_{\star}\,[\mathrm{kg}\,\mathrm{m}^{-3}]) = 5.413 - 1.850 \log_{10}(F_8\,[\mathrm{ppm}])$. The calibration is valid for stars with $4500$K$<T_{\mathrm{eff}}<6500$K, $K_P<14$ and flicker estimates corresponding to stars with $3.25<\log g_{\star}<4.43$. Our relation has a model error in the stellar density of 31.7% and so has $\sim8$ times lower precision than that from asteroseismology but is applicable to a sample $\sim40$ times greater. Flicker therefore provides an empirical method to enable asterodensity profiling on hundreds of planetary candidates from present and future missions.

We present revised properties for 196,468 stars observed by the NASA Kepler Mission and used in the analysis of Quarter 1-16 (Q1-Q16) data to detect and characterize transiting exoplanets. The catalog is based on a compilation of literature values for atmospheric properties (temperature, surface gravity, and metallicity) derived from different observational techniques (photometry, spectroscopy, asteroseismology, and exoplanet transits), which were then homogeneously fitted to a grid of Dartmouth stellar isochrones. We use broadband photometry and asteroseismology to characterize 11,532 Kepler targets which were previously unclassified in the Kepler Input Catalog (KIC). We report the detection of oscillations in 2,762 of these targets, classifying them as giant stars and increasing the number of known oscillating giant stars observed by Kepler by ~20% to a total of ~15,500 stars. Typical uncertainties in derived radii and masses are ~40% and ~20%, respectively, for stars with photometric constraints only, and 5-15% and ~10% for stars based on spectroscopy and/or asteroseismology, although these uncertainties vary strongly with spectral type and luminosity class. A comparison with the Q1-Q12 catalog shows a systematic decrease in radii for M dwarfs, while radii for K dwarfs decrease or increase depending on the Q1-Q12 provenance (KIC or Yonsei-Yale isochrones). Radii of F-G dwarfs are on average unchanged, with the exception of newly identified giants. The Q1-Q16 star properties catalog is a first step towards an improved characterization of all Kepler targets to support planet occurrence studies.

The Sloan Digital Sky Survey (SDSS) has been in operation since 2000 April. This paper presents the tenth public data release (DR10) from its current incarnation, SDSS-III. This data release includes the first spectroscopic data from the Apache Point Observatory Galaxy Evolution Experiment (APOGEE), along with spectroscopic data from the Baryon Oscillation Spectroscopic Survey (BOSS) taken through 2012 July. The APOGEE instrument is a near-infrared R~22,500 300-fiber spectrograph covering 1.514--1.696 microns. The APOGEE survey is studying the chemical abundances and radial velocities of roughly 100,000 red giant star candidates in the bulge, bar, disk, and halo of the Milky Way. DR10 includes 178,397 spectra of 57,454 stars, each typically observed three or more times, from APOGEE. Derived quantities from these spectra (radial velocities, effective temperatures, surface gravities, and metallicities) are also included.DR10 also roughly doubles the number of BOSS spectra over those included in the ninth data release. DR10 includes a total of 1,507,954 BOSS spectra, comprising 927,844 galaxy spectra; 182,009 quasar spectra; and 159,327 stellar spectra, selected over 6373.2 square degrees.

A large fraction of cool, low-mass stars exhibit brightness fluctuations that arise from a combination of convective granulation, acoustic oscillations, magnetic activity, and stellar rotation. Much of the short-timescale variability takes the form of stochastic noise, whose presence may limit the progress of extrasolar planet detection and characterization. In order to lay the groundwork for extracting useful information from these quasi-random signals, we focus on the origin of the granulation-driven component of the variability. We apply existing theoretical scaling relations to predict the star-integrated variability amplitudes for 508 stars with photometric light curves measured by the Kepler mission. We also derive an empirical correction factor that aims to account for the suppression of convection in F-dwarf stars with magnetic activity and shallow convection zones. So that we can make predictions of specific observational quantities, we performed Monte Carlo simulations of granulation light curves using a Lorentzian power spectrum. These simulations allowed us to reproduce the so-called "flicker floor" (i.e., a lower bound in the relationship between the full light-curve range and power in short-timescale fluctuations) that was found in the Kepler data. The Monte Carlo model also enabled us to convert the modeled fluctuation variance into a flicker amplitude directly comparable with observations. When the magnetic suppression factor described above is applied, the model reproduces the observed correlation between stellar surface gravity and flicker amplitude. Observationally validated models like these provide new and complementary evidence for a possible impact of magnetic activity on the properties of near-surface convection.

We cross-match the GALEX and Kepler surveys to create a unique dataset with both ultraviolet (UV) measurements and highly precise photometric variability measurements in the visible light spectrum. As stellar activity is driven by magnetic field modulations, we have used UV emission from the magnetically heated gas in the stellar atmosphere to serve as our proxy for the more well-known stellar activity indicator, R'HK. The R'HK approximations were in turn used to estimate the level of astrophysical noise expected in radial velocity (RV) measurements and these were then searched for correlations with photometric variability. We find significant scatter in our attempts to estimate RV noise for magnetically active stars, which we attribute to variations in the phase and strength of the stellar magnetic cycle that drives the activity of these targets. However, for stars we deem to be magnetically quiet, we do find a clear correlation between photometric variability and estimated levels of RV noise (with variability up to ~ 10 m/s). We conclude, that for these quiet stars, we can use photometric measurements as a proxy to estimate the RV noise expected. As a result, the procedure outlined in this paper may help select targets best-suited for RV follow-up necessary for planet confirmation.

We compare stellar photometric variability, as measured from Kepler light curves by Basri et al. (2011), with measurements of radial velocity (RV) root-mean-square (RMS) variations of all California Planet Search overlap stars. We newly derive rotation periods from the Kepler light curves for all of the stars in our study sample. The RV variations reported herein range from less than 4 m/s to 135 m/s, yet the stars all have amplitudes of photometric variability less than 3 mmag, reflecting the preference of the RV program for chromospherically "quiet" stars. Despite the small size of our sample, we find with high statistical significance that the RV RMS manifests strongly in the Fourier power spectrum of the light curve: stars that are noisier in RV have a greater number of frequency components in the light curve. We also find that spot models of the observed light curves systematically underpredict the observed RV variations by factors of ~2--1000, likely because the low level photometric variations in our sample are driven by processes not included in simple spot models. The stars best fit by these models tend to have simpler light curves, dominated by a single relatively high amplitude component of variability. Finally, we demonstrate that the RV RMS behavior of our sample can be explained in the context of the photometric variability evolutionary diagram introduced by Bastien et al. (2013). We use this diagram to derive the surface gravities of the stars in our sample, revealing many of them to have moved off the main-sequence. More generally, we find that the stars with the largest RV RMS are those that have evolved onto the "flicker floor" sequence in that diagram, characterized by relatively low amplitude but highly complex photometric variations which grow as the stars evolve to become subgiants.

Surface gravity is one of a star's basic properties, but it is difficult to measure accurately, with typical uncertainties of 25-50 per cent if measured spectroscopically and 90-150 per cent photometrically. Asteroseismology measures gravity with an uncertainty of about two per cent but is restricted to relatively small samples of bright stars, most of which are giants. The availability of high-precision measurements of brightness variations for >150,000 stars provides an opportunity to investigate whether the variations can be used to determine surface gravities. The Fourier power of granulation on a star's surface correlates physically with surface gravity; if brightness variations on timescales of hours arise from granulation, then such variations should correlate with surface gravity. Here we report an analysis of archival data that reveals an observational correlation between surface gravity and the root-mean-square brightness variations on timescales of less than eight hours for stars with temperatures of 4500-6750K, log of surface gravities of 2.5-4.5 (cgs units), and having overall brightness variations <3 parts per thousand. A straightforward observation of optical brightness variations therefore allows a determination of the surface gravity with a precision of <25 percent for inactive Sun-like stars at main-sequence to giant stages of evolution.

We present the analysis of 21 bright X-ray knots in the Cassiopeia A supernova remnant from observations spanning 10 yr. We performed a comprehensive set of measurements to reveal the kinematic and thermal state of the plasma in each knot, using a combined analysis of two high energy resolution High Energy Transmission Grating (HETG) and four medium energy resolution Advanced CCD Imaging Spectrometer (ACIS) sets of spectra. The ACIS electron temperature estimates agree with the HETG-derived values for approximately half of the knots studied, yielding one of the first comparisons between high resolution temperature estimates and ACIS-derived temperatures. We did not observe the expected spectral evolutionpredicted from the ionization age and density estimates for each knotin all but three of the knots studied. The incompatibility of these measurements with our assumptions has led us to propose a dissociated ejecta model, with the metals unmixed inside the knots, which could place strong constraints on supernova mixing models.

We present the detection of five planets -- Kepler-62b, c, d, e, and f -- of size 1.31, 0.54, 1.95, 1.61 and 1.41 Earth radii, orbiting a K2V star at periods of 5.7, 12.4, 18.2, 122.4 and 267.3 days, respectively. The outermost planets (Kepler-62e & -62f) are super-Earth-size (1.25 < planet radius/earth radius < 2.0) planets in the habitable zone (HZ) of their host star, receiving 1.2 +- 0.2 and 0.41 +- 0.05 times the solar flux at Earth's orbit. Theoretical models of Kepler-62e and -62f for a stellar age of ~7 Gyr suggest that both planets could be solid: either with a rocky composition or composed of mostly solid water in their bulk.

We present results from six years of recalibrated and new spectropolarimetric data taken with the University of Wisconsin's Half-Wave Spectropolarimeter (HPOL) and six years of new data taken with the photoelastic modulating polarimeter (PEMP) at the Flower and Cook Observatory. Combining these data with polarimetric data from the literature allows us to characterize the intrinsic BVRI polarized light curves. A repeatable discrepancy of 0.245 days (approximately 6 hours) between the secondary minima in the total light curve and the polarization curve in the V band, with similar behavior in the other bands, may represent the first direct evidence for an accretion hot spot on the disk edge.

We report the results from spectroscopic observations of 113 ultra-wide, low-mass binary systems, composed largely of M0--M3 dwarfs, from the SLoWPoKES catalog of common proper motion pairs identified in the Sloan Digital Sky Survey. Radial velocities of each binary member were used to confirm that they are co-moving and, consequently, to further validate the high fidelity of the SLoWPoKES catalog. Ten stars appear to be spectroscopic binaries based on broad or split spectral features, supporting previous findings that wide binaries are likely to be hierarchical systems. We measured the H{\alpha} equivalent width of the stars in our sample and found that components of 81% of the observed pairs has similar H{\alpha} levels. The difference in H{\alpha} equivalent width amongst components with similar masses was smaller than the range of H{\alpha} variability for individual objects. We confirm that the Lepine et al. {\zeta}(CaH2+CaH3, TiO5) index traces iso-metallicity loci for most of our sample of M dwarfs. However, we find a small systematic bias in {\zeta}, especially in the early-type M dwarfs. We use our sample to recalibrate the definition of {\zeta}. While representing a small change in the definition, the new {\zeta} is a significantly better predictor of iso-metallicity for the higher mass M dwarfs.

We present high cadence (1-10 hr^-1) time-series photometry of the eruptive young variable star V1647 Orionis during its 2003-2004 and 2008-2009 outbursts. The 2003 light curve was obtained mid-outburst at the phase of steepest luminosity increase of the system, during which time the accretion rate of the system was presumably continuing to increase toward its maximum rate. The 2009 light curve was obtained after the system luminosity had plateaued, presumably when the rate of accretion had also plateaued. We detect a 'flicker noise' signature in the power spectrum of the lightcurves, which may suggest that the stellar magnetosphere continued to interact with the accretion disk during each outburst event. Only the 2003 power spectrum, however, evinces a significant signal with a period of 0.13 d. While the 0.13 d period cannot be attributed to the stellar rotation period, we show that it may plausibly be due to short-lived radial oscillations of the star, possibly caused by the surge in the accretion rate.

Variability is a defining characteristic of young stellar systems, and optical variability has been heavily studied to select and characterize the photospheric properties of young stars. In recent years, multi-epoch observations sampling a wider range of wavelengths and time-scales have revealed a wealth of time-variable phenomena at work during the star formation process. This splinter session was convened to summarize recent progress in providing improved coverage and understanding of time-variable processes in young stars and circumstellar disks. We begin by summarizing results from several multi-epoch Spitzer campaigns, which have demonstrated that many young stellar objects evidence significant mid-IR variability. While some of these variations can be attributed to processes in the stellar photosphere, others appear to trace short time-scale changes in the circumstellar disk which can be successfully modeled with axisymmetric or non-axisymmetric structures. We also review recent studies probing variability at shorter wavelengths that provide evidence for high frequency pulsations associated with accretion outbursts, correlated optical/X-ray variability in Classical T Tauri stars, and magnetic reversals in young solar analogs.