CO isotopologue transitions are routinely observed in molecular clouds to probe the column density of the gas, the elemental ratios of carbon and oxygen, and to trace the kinematics of the environment. We aim at estimating the abundances, excitation temperatures, velocity field and velocity dispersions of the three main CO isotopologues towards a subset of the Orion B molecular cloud. We use the Cramer Rao Bound (CRB) technique to analyze and estimate the precision of the physical parameters in the framework of local-thermodynamic-equilibrium excitation and radiative transfer with an additive white Gaussian noise. We propose a maximum likelihood estimator to infer the physical conditions from the 1-0 and 2-1 transitions of CO isotopologues. Simulations show that this estimator is unbiased and efficient for a common range of excitation temperatures and column densities (Tex > 6 K, N > 1e14 - 1e15 cm-2). Contrary to the general assumptions, the different CO isotopologues have distinct excitation temperatures, and the line intensity ratios between different isotopologues do not accurately reflect the column density ratios. We find mean fractional abundances that are consistent with previous determinations towards other molecular clouds. However, significant local deviations are inferred, not only in regions exposed to UV radiation field but also in shielded regions. These deviations result from the competition between selective photodissociation, chemical fractionation, and depletion on grain surfaces. We observe that the velocity dispersion of the C18O emission is 10% smaller than that of 13CO. The substantial gain resulting from the simultaneous analysis of two different rotational transitions of the same species is rigorously quantified. The CRB technique is a promising avenue for analyzing the estimation of physical parameters from the fit of spectral lines.

Filaments are a key step on the path that leads from molecular clouds to star formation. However, their characteristics are heavily debated, and the exact processes that lead to their formation and fragmentation into dense cores still remain to be fully understood. We aim at characterising the mass, kinematics, and stability against gravitational collapse of a statistically significant sample of filaments in the Orion B molecular cloud, which is renown for its very low star formation efficiency. We characterise the gas column densities and kinematics over a field of 1.9 deg$^2$, using C$^{18}$O(J=1-0) data from the IRAM-30m large programme ORION-B. Using two different Hessian-based filters, we extract and compare two filamentary networks, each containing over 100 filaments. Independent of the extraction method, the filaments have widths of 0.12$\pm$0.04 pc, and show a wide range of linear (1 - 100 $M_{\odot}$pc$^{-1}$) and volume densities (2.10$^3$ - 2.10$^5$ cm$^{-3}$). Compared to previous studies, the filament population is dominated by low-density, thermally sub-critical structures, suggesting that most of the identified filaments are not collapsing to form stars. In fact, only ~1% of the Orion B cloud mass covered by our observations can be found in super-critical, star-forming filaments, explaining the low star formation efficiency of the region. The velocity profiles observed across the filaments show quiescence in the centre, and coherency in the plane of the sky, despite being mostly supersonic. The filaments in Orion B apparently belong to a continuum which contains a few elements comparable to already studied star-forming filaments as well as many lower-density, gravitationally unbound structures. This comprehensive study of the Orion B filaments shows that the mass fraction in super-critical filaments is a key factor in determining star formation efficiency.

Previous attempts at segmenting molecular line maps of molecular clouds have focused on using position-position-velocity data cubes of a single line to separate the spatial components of the cloud. In contrast, wide field spectral imaging with large spectral bandwidth in the (sub)mm domain now allows to combine multiple molecular tracers to understand the different physical and chemical phases that constitute giant molecular clouds. We aim at using multiple tracers (sensitive to different physical processes) to segment a molecular cloud into physically/chemically similar regions (rather than spatially connected components). We use a machine learning clustering method (the Meanshift algorithm) to cluster pixels with similar molecular emission, ignoring spatial information. Simple radiative transfer models are used to interpret the astrophysical information uncovered by the clustering. A clustering analysis based only on the J=1-0 lines of 12CO, 13CO and C18O reveals distinct density/column density regimes (nH~100, 500, and >1000 cm-3), closely related to the usual definitions of diffuse, translucent and high-column-density regions. Adding two UV-sensitive tracers, the (1-0) lines of HCO+ and CN, allows us to distinguish two clearly distinct chemical regimes, characteristic of UV-illuminated and UV-shielded gas. The UV-illuminated regime shows overbright HCO+ and CN emission, which we relate to photochemical enrichment. We also find a tail of high CN/HCO+ intensity ratio in UV-illuminated regions. Finer distinctions in density classes (nH~7E3, and 4E4 cm-3) for the densest regions are also identified, likely related to the higher critical density of the CN and HCO+ (1-0) lines. The association of simultaneous multi-line, wide-field mapping and powerful machine learning methods such as the Meanshift algorithm reveals how to decode the complex information available in molecular tracers.

Context. The combination of wideband receivers and spectrometers currently available in (sub-)millimeter observatories deliver wide- field hyperspectral imaging of the interstellar medium. Tens of spectral lines can be observed over degree wide fields in about fifty hours. This wealth of data calls for restating the physical questions about the interstellar medium in statistical terms. Aims. We aim at gaining information on the physical structure of the interstellar medium from a statistical analysis of many lines from different species over a large field of view, without requiring detailed radiative transfer or astrochemical modeling. Methods. We coupled a nonlinear rescaling of the data with one of the simplest multivariate analysis methods, namely the Principal Component Analysis, to decompose the observed signal into components that we interpret first qualitatively and then quantitatively based on our deep knowledge of the observed region and of the astrochemistry at play. Results. We identify 3 principal components, linear compositions of line brightness temperatures, that are correlated at various levels with the column density, the volume density and the UV radiation field. Conclusions. When sampling a sufficiently diverse mixture of physical parameters, it is possible to decompose the molecular emission in order to gain physical insight on the observed interstellar medium. This opens a new avenue for future studies of the interstellar medium.

The nature of turbulence in molecular clouds is one of the key parameters that control star formation efficiency: compressive motions, as opposed to solenoidal motions, can trigger the collapse of cores, or mark the expansion of Hii regions. We try to observationally derive the fractions of momentum density ($\rho v$) contained in the solenoidal and compressive modes of turbulence in the Orion B molecular cloud and relate these fractions to the star formation efficiency in the cloud. The implementation of a statistical method developed by Brunt & Federrath (2014), applied to a $^{13}$CO(J=1-0) datacube obtained with the IRAM-30m telescope, allows us to retrieve 3-dimensional quantities from the projected quantities provided by the observations, yielding an estimate of the compressive versus solenoidal ratio in various regions of the cloud. Despite the Orion B molecular cloud being highly supersonic (mean Mach number $\sim$ 6), the fractions of motion in each mode diverge significantly from equipartition. The cloud's motions are on average mostly solenoidal (excess > 8 % with respect to equipartition), which is consistent with its low star formation rate. On the other hand, the motions around the main star-forming regions (NGC 2023 and NGC 2024) prove to be strongly compressive. We have successfully applied to observational data a method that was so far only tested on simulations, and have shown that there can be a strong intra-cloud variability of the compressive and solenoidal fractions, these fractions being in turn related to the star formation efficiency. This opens a new possibility for star-formation diagnostics in galactic molecular clouds.

We aim to develop the Orion B Giant Molecular Cloud (GMC) as a local template for interpreting extra-galactic molecular line observations. We use the wide-band receiver at the IRAM-30m to spatially and spectrally resolve the Orion B GMC. The observations cover almost 1 square degree at 26" resolution with a bandwidth of 32 GHz from 84 to 116 GHz in only two tunings. Among the mapped spectral lines are the 12CO, 13CO, C18O, C17O, HCN, HNC, 12CN, CCH, HCO+, N2H+ (1-0), and 12CS, 32SO, SiO, c-C3H2, CH3OH (2-1) transitions. We introduce the molecular anatomy of the Orion B GMC, including relations between line intensities and gas column density or far-UV radiation fields, and correlations between selected line and line ratios. We also obtain a dust-traced gas mass that is less than about one third the CO-traced mass, using the standard Xco conversion factor. The presence of overluminous CO can be traced back to the dependence of the CO intensity on UV illumination. In fact, while most lines show some dependence on the UV radiation field, CN and CCH are the most sensitive. Moreover dense cloud cores are almost exclusively traced by N2H+. Other traditional high density tracers, such as HCN (1-0), are also easily detected in extended translucent regions at a typical density of about 500 H2 cm-3. In general, we find no straightforward relation between line critical density and the fraction of the line luminosity coming from dense gas regions. Our initial findings demonstrate that the relations between line (ratio) intensities and environment in GMCs are more complicated than often assumed. Sensitivity (i.e., the molecular column density), excitation, and above all chemistry contribute to the observed line intensity distributions. They must be considered together when developing the next generation of extra-galactic molecular line diagnostics of mass, density, temperature and radiation field.

Formation of stars is now believed to be tightly linked to the dynamical evolution of interstellar filaments in which they form. In this paper we analyze the density structure and kinematics of a small network of infrared dark filaments, SDC13, observed in both dust continuum and molecular line emission with the IRAM 30m telescope. These observations reveal the presence of 18 compact sources amongst which the two most massive, MM1 and MM2, are located at the intersection point of the parsec-long filaments. The dense gas velocity and velocity dispersion observed along these filaments show smooth, strongly correlated, gradients. We discuss the origin of the SDC13 velocity field in the context of filament longitudinal collapse. We show that the collapse timescale of the SDC13 filaments (from 1 Myr to 4 Myr depending on the model parameters) is consistent with the presence of Class I sources in them, and argue that, on top of bringing more material to the centre of the system, collapse could generate additional kinematic support against local fragmentation, helping the formation of starless super-Jeans cores.

We present the first detection of the l-C3H+ hydrocarbon in the interstellar medium. The Horsehead WHISPER project, a millimeter unbiased line survey at two positions, namely the photo-dissociation region (PDR) and the nearby shielded core, revealed a consistent set of eight unidentified lines toward the PDR position. Six of them are detected with a signal-to-noise ratio from 6 to 19, while the two last ones are tentatively detected. Mostly noise appears at the same frequency toward the dense core, located less than 40" away. We simultaneously fit 1) the rotational and centrifugal distortion constants of a linear rotor, and 2) the Gaussian line shapes located at the eight predicted frequencies. The observed lines can be accurately fitted with a linear rotor model, implying a 1Sigma ground electronic state. The deduced rotational constant value is Be= 11244.9512 +/- 0.0015 MHz, close to that of l-C3H. We thus associate the lines to the l-C3H+ hydrocarbon cation, which enables us to constrain the chemistry of small hydrocarbons. A rotational diagram is then used to infer the excitation temperature and the column density. We finally compare the abundance to the results of the Meudon PDR photochemical model.

The advent of large instantaneous bandwidth receivers and high spectral resolution spectrometers on (sub-)millimeter telescopes has opened up the possibilities for unbiased spectral surveys. Because of the large amount of data they contain, any analysis of these surveys requires dedicated software tools. Here we present an extension of the widely used CLASS software that we developed to that purpose. This extension, named Weeds, allows for searches in atomic and molecular lines databases (e.g. JPL or CDMS) that may be accessed over the internet using a virtual observatory (VO) compliant protocol. The package permits a quick navigation across a spectral survey to search for lines of a given species. Weeds is also capable of modeling a spectrum, as often needed for line identification. We expect that Weeds will be useful for analyzing and interpreting the spectral surveys that will be done with the HIFI instrument on board Herschel, but also observations carried-out with ground based millimeter and sub-millimeter telescopes and interferometers, such as IRAM-30m and Plateau de Bure, CARMA, SMA, eVLA, and ALMA.

We present a reconstruction of the mass distribution of galaxy cluster Abell 1689 at z = 0.18 using detected strong lensing features from deep HST/ACS observations and extensive ground based spectroscopy. Earlier analyses have reported up to 32 multiply imaged systems in this cluster, of which only 3 were spectroscopically confirmed. In this work, we present a parametric strong lensing mass reconstruction using 24 multiply imaged systems with newly determined spectroscopic redshifts, which is a major step forward in building a robust mass model. In turn, the new spectroscopic data allows a more secure identification of multiply imaged systems. The resultant mass model enables us to reliably predict the redshifts of additional multiply imaged systems for which no spectra are currently available, and to use the location of these systems to further constrain the mass model. In particular, we have detected 5 strong galaxy-galaxy lensing systems just outside the Einstein ring region, further constraining the mass profile. Our strong lensing mass model is consistent with that inferred from our large scale weak lensing analysis derived using CFH12k wide field images. Thanks to a new method for reliably selecting a well defined background lensed galaxy population, we resolve the discrepancy found between the strong and weak lensing mass models reported in earlier work. [ABRIDGED]

Aims: We present a wide-field multi-color survey of a homogeneous sample of eleven clusters of galaxies for which we measure total masses and mass distributions from weak lensing. Methods: The eleven clusters in our sample are all X-ray luminous and span a narrow redshift range at z=0.21 +/- 0.04. The weak lensing analysis of the sample is based on ground-based wide-field imaging obtained with the CFH12k camera on CFHT. We use the methodology developed and applied previously on the massive cluster Abell 1689. A Bayesian method, implemented in the Im2shape software, is used to fit the shape parameters of the faint background galaxies and to correct for PSF smearing. With the present data, shear profiles are measured in all clusters out to at least 2 Mpc (more than 15arcmin from the center) with high confidence. The radial shear profiles are fitted with different parametric mass profiles and the virial mass M_200 is estimated for each cluster and then compared to other physical properties. Results: Scaling relations between mass and optical luminosity indicate an increase of the M/L ratio with luminosity and a L_X-M_200 relation scaling as L_X \propto M_200^(0.83 +/- 0.11) while the normalization of the M_200 \propto T_X^{3/2} relation is close to the one expected from hydrodynamical simulations of cluster formation as well as previous X-ray analyses. We suggest that the dispersion in the M_200-T_X and M_200-L_X relations reflects the different merging and dynamical histories for clusters of similar X-ray luminosities and intrinsic variations in their measured masses. Improved statistics of clusters over a wider mass range are required for a better control of the intrinsic scatter in scaling relations.

Our aim is to constrain the properties of dark matter halos inhabiting high density environments, such as is the case in massive galaxy clusters. We use galaxy-galaxy lensing techniques that utilize a maximum likelihood method to constrain the parameters of the lenses. It has been demonstrated that such a technique provides strong constraints on the parameters that characterize a galaxy halo, as well as on the aperture mass of these halos. In this analysis, we only use weak shear data and do not include strong lensing constraints. We present the results of a study of galaxy-galaxy lensing in a homogeneous sample of massive X-ray luminous clusters at z~0.2. These have been observed in three bands with the CFH12k instrument. We find dark matter halos in these clusters to be compact compared to those inferred around isolated field galaxies of equivalent luminosity at this redshift: the half mass radius is found to be smaller than 50 kpc, with a mean total mass of order 0.2 10^{12} M_sun. This is in good agreement with previous galaxy-galaxy lensing results and with numerical simulations, in particular with the tidal stripping scenario. We thus provide a strong confirmation of tidal truncation from a homogeneous sample of galaxy clusters. Moreover, it is the first time that cluster galaxies are probed successfully using galaxy-galaxy lensing techniques from ground based data.

We present the weak lensing methodology applied to our multi-colour imaging survey of X-ray luminous galaxy clusters conducted with the wide field CFH12k camera. This method, which is converting a fully reduced CFH12k image into cluster mass constraints, is done in two steps that we explain in detail: (1) determination of the "true" shape of faint (lensed) galaxies which involves: object detection strategy, point spread function (PSF) determination, galaxy shapes measurements with errors; (2) conversion of the faint galaxies catalogue into useful mass constraints which is done by different lensing techniques using 1D and/or 2D mass estimates. Finally, we compare the cluster mass model to the light distribution of cluster members as observed on our imaging data. To illustrate the method, we apply it to the well studied cluster Abell 1689 (z=0.184). In this cluster, we detect the gravitational shear signal to the edge of the image at 3 sigma significance. The two-dimensional mass reconstruction has a ~10 sigma significance mass peak centered on the brightest cluster galaxy. The weak lensing constraints are well fitted by a NFW mass profile with $M_{200} = 14.1^{+6.3}_{-4.7}\times 10^{14} M_\sun$, and $c = 3.5^{+0.5}_{-0.3}$ (chi^2=0.33), or by a power law (PL) profile with q=0.75 +- 0.07 and theta_E = 14.6"+-0.3" (chi^2=0.64). The mass-to-light ratio is found to be almost constant with radius with a mean value of M/L_R = 150 h (M/L)_\sun. We compare these results to other weak lensing analyses of Abell 1689 presented in the literature and find good agreements in terms of the shear measurement as well as the final mass estimate.

We present an analysis of 7 clusters observed by XMM as part of our survey of 17 most X-ray luminous clusters of galaxies at z=0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using public software, we have set up an automated pipeline to reduce the EPIC MOS & pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM deep spectro-imaging of these clusters allowed us to fit a standard beta-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.

Clusters of galaxies need to be investigated using complementary approaches combining all currently available observational techniques (X-ray, gravitational lensing, dynamics, SZ) on homogeneous samples if one wants to understand their evolution and physical properties. This is particularly important in order to relate the observable quantities to the cosmologically important cluster mass. We present here a number of on-going projects that aim at studying cluster physics for samples based on currently available all-sky X-ray surveys such as XBACs, BCS and MACS.