In this paper, we investigate full-wave computed radar tomography (CRT) using a rubble-pile asteroid model in which a realistic shape (Itokawa) is coupled with a synthetic material composition and structure model. The aim is to show that sparse bistatic radar measurements can distinguish details inside a complex-structured rubble-pile asteroid. The results obtained suggest that distinct local permittivity distribution changes such as surface layers, voids, low-permittivity anomalies, high-permittivity boulders, and cracks can be detected with bistatic CRT, when the total noise level in the data is around -10 dB with respect to the signal amplitude. Moreover, the bistatic measurement set-up improves the robustness of the inversion compared to the monostatic case. Reconstructing the smooth Gaussian background distribution was found to be difficult with the present approach, suggesting that complementary techniques, such as gravimetry, might be needed to improve the reliability of the inference in practice.

This article investigates reconstructing the internal mass density of a numerical asteroid model using the gradient of a simulated gravity field as synthetic measurement data. Our goal is to advance the mathematical inversion methodology and find feasibility constraints for the resolution, noise and orbit selection for future space missions. We base our model on the shape of the asteroid Itokawa as well as on the recent observations and simulation studies which suggest that the internal density varies, increasing towards the center, and that the asteroid may have a detailed structure. We introduce randomized multiresolution scan algorithm which might provide a robust way to cancel out bias and artifact effects related to the measurement noise and numerical discretization. In this scheme, the inverse algorithm can reconstruct details of various sizes without fixing the exact resolution {\em a priori}, and the randomization minimizes the effect of discretization on the solution. We show that the adopted methodology provides an advantageous way to diminish the surface bias of the inverse solution. The results also suggest that a noise level below 80 Eotvos will be sufficient for the detection of internal voids and high density anomalies, if a sparse set of measurements can be obtained from a close-enough distance to the target.

We have performed an initial stage conceptual design study for the Deep Interior Scanning CubeSat (DISCUS), a tandem 6U CubeSat carrying a bistatic radar as main payload. DISCUS will be operated either as an independent mission or accompanying a larger one. It is designed to determine the internal macroporosity of a 260-600 m diameter Near Earth Asteroid (NEA) from a few kilometers distance. The main goal will be to achieve a global penetration with a low-frequency signal as well as to analyze the scattering strength for various different penetration depths and measurement positions. Moreover, the measurements will be inverted through a computed radar tomography (CRT) approach. The scientific data provided by DISCUS would bring more knowledge of the internal configuration of rubble pile asteroids and their collisional evolution in the Solar System. It would also advance the design of future asteroid deflection concepts. We aim at a single-unit (1U) radar design equipped with a half-wavelength dipole antenna. The radar will utilize a stepped-frequency modulation technique the baseline of which was developed for ESA's technology projects GINGER and PIRA. The radar measurements will be used for CRT and shape reconstruction. The CubeSat will also be equipped with an optical camera system and laser altimeter to sup- port navigation and shape reconstruction. We provide the details of the measurement methods to be applied along with the requirements derived of the known characteristics of rubble pile asteroids.

This study aims at advancing mathematical and computational techniques for reconstructing the interior structure of a near earth asteroid (NEA) via Computed Radar Tomography (CRT). We introduce a far-field model for full-wave CRT and validate it numerically for sparse and limited-angle data and an orbiting distance of about 5 km. As a potential future application of the proposed method, we consider the Deep Interior Scanning CUbeSat (DISCUS) concept in which two small spacecraft carrying a bistatic radar localize internal macropores inside a rubble pile asteroid.