The Transiting Exoplanet Survey Satellite (TESS) is observing bright known planet-host stars across almost the entire sky. These stars have been subject to extensive ground-based observations, providing a large number of radial velocity (RV) measurements. In this work we use the new TESS photometric observations to characterize the star $\lambda^2$ Fornacis, and following this to update the parameters of the orbiting planet $\lambda^2$ For b. We measure the p-mode oscillation frequencies in $\lambda^2$ For, and in combination with non-seismic parameters estimate the stellar fundamental properties using stellar models. Using the revised stellar properties and a time series of archival RV data from the UCLES, HIRES and HARPS instruments spanning almost 20 years, we refit the orbit of $\lambda^2$ For b and search the RV residuals for remaining variability. We find that $\lambda^2$ For has a mass of $1.16\pm0.03$M$_\odot$ and a radius of $1.63\pm0.04$R$_\odot$, with an age of $6.3\pm0.9$Gyr. This and the updated RV measurements suggest a mass of $\lambda^2$ For b of $16.8^{+1.2}_{-1.3}$M$_\oplus$, which is $\sim5$M$_\oplus$ less than literature estimates. We also detect a periodicity at 33 days in the RV measurements, which is likely due to the rotation of the host star. While previous literature estimates of the properties of $\lambda^2$ are ambiguous, the asteroseismic measurements place the star firmly at the early stage of its subgiant evolutionary phase. Typically only short time series of photometric data are available from TESS, but by using asteroseismology it is still possible to provide tight constraints on the properties of bright stars that until now have only been observed from the ground. This prompts a reexamination of archival RV data from the past few decades to update the characteristics of the planet hosting systems observed by TESS for which asteroseismology is possible.

Accurate masses and radii for normal stars derived from observations of detached eclipsing binary stars are of fundamental importance for testing stellar models and may be useful for calibrating free parameters in these model if the masses and radii are sufficiently precise and accurate. We aim to measure precise masses and radii for the stars in the bright eclipsing binary AI Phe, and to quantify the level of systematic error in these estimates. We use several different methods to model the TESS light curve of AI Phe combined with spectroscopic orbits from multiple sources to estimate precisely the stellar masses and radii together with robust error estimates. We find that the agreement between different methods for the light curve analysis is very good but some methods underestimate the errors on the model parameters. The semi-amplitudes of the spectroscopic orbits derived from spectra obtained with modern echelle spectrographs are consistent to within 0.1%. The masses of the stars in AI Phe are $M_1 = 1.1938 \pm 0.0008 M_{\odot}$ and $M_2 = 1.2438 \pm 0.0008M_{\odot}$, and the radii are $R_1 = 1.8050 \pm 0.0022 R_{\odot}$ and $R_2 = 2.9332 \pm 0.0023 R_{\odot}$. We conclude that it is possible to measure accurate masses and radii for stars in bright eclipsing binary stars to a precision of 0.2% or better using photometry from TESS and spectroscopy obtained with modern echelle spectrographs. We provide recommendations for publishing masses and radii of eclipsing binary stars at this level of precision.

Asteroseismology is a powerful tool for probing the internal structures of stars by using their natural pulsation frequencies. It relies on identifying sequences of pulsation modes that can be compared with theoretical models, which has been done successfully for many classes of pulsators, including low-mass solar-type stars, red giants, high-mass stars and white dwarfs. However, a large group of pulsating stars of intermediate mass--the so-called delta Scuti stars--have rich pulsation spectra for which systematic mode identification has not hitherto been possible. This arises because only a seemingly random subset of possible modes are excited, and because rapid rotation tends to spoil the regular patterns. Here we report the detection of remarkably regular sequences of high-frequency pulsation modes in 60 intermediate-mass main-sequence stars, allowing definitive mode identification. Some of these stars have space motions that indicate they are members of known associations of young stars, and modelling of their pulsation spectra confirms that these stars are indeed young.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data

The frequency, $\nu_{\rm max}$, at which the envelope of pulsation power peaks for solar-like oscillators is an important quantity in asteroseismology. We measure $\nu_{\rm max}$ for the Sun using 25 years of Sun-as-a-Star Doppler velocity observations with the Birmingham Solar-Oscillations Network (BiSON), by fitting a simple model to binned power spectra of the data. We also apply the fit to Sun-as-a-Star Doppler velocity data from GONG and GOLF, and photometry data from VIRGO/SPM on the ESA/NASA SOHO spacecraft. We discover a weak but nevertheless significant positive correlation of the solar $\nu_{\rm max}$ with solar activity. The uncovered shift between low and high activity, of $\simeq 25\,\rm \mu Hz$, translates to an uncertainty of 0.8 per cent in radius and 2.4 per cent in mass, based on direct use of asteroseismic scaling relations calibrated to the Sun. The mean $\nu_{\rm max}$ in the different datasets is also clearly offset in frequency. Our results flag the need for caution when using $\nu_{\rm max}$ in asteroseismology.

We report the discovery of a warm sub-Saturn, TOI-257b (HD 19916b), based on data from NASA's Transiting Exoplanet Survey Satellite (TESS). The transit signal was detected by TESS and confirmed to be of planetary origin based on radial-velocity observations with the Minerva-Australis telescope array. An analysis of the TESS photometry, the Minerva-Australis, FEROS, and HARPS radial velocities, and the asteroseismic data of the stellar oscillations reveals that TOI-257b has a mass of $M_P=0.134^{+0.023}_{-0.022}$$\rm{M_J}$ ($42.6^{+7.3}_{-7.0}$$\rm{M_{\oplus}}$), a radius of $R_P=0.626^{+0.013}_{-0.012}$$\rm{R_J}$ ($7.02^{+0.15}_{-0.13}$$\rm{R_{\oplus}}$), and an orbit with eccentricity $0.242^{+0.040}_{-0.065}$ and period $18.38827\pm0.00072$$\rm{days}$. TOI-257b orbits a bright ($\mathrm{V}=7.570$mag) somewhat evolved late F-type star with $M_*=1.390\pm0.046$$\rm{M_{\odot}}$, $R_*=1.888\pm0.033$$\rm{R_{\odot}}$, $T_{\rm eff}=6075\pm90$$\rm{K}$, and $v\sin{i}=11.3\pm0.5$km/s. Additionally, we statistically validate a second non-transiting sub-Saturn mass planet on a $\sim71$day orbit using the radial velocity data. This system joins the ranks of a small number of exoplanet host stars that have been characterized with asteroseismology. Warm sub-Saturns are rare in the known sample of exoplanets, and thus the discovery of TOI-257b is important in the context of future work studying the formation and migration history of similar planetary systems.

Over the course of its history, the Milky Way has ingested multiple smaller satellite galaxies. While these accreted stellar populations can be forensically identified as kinematically distinct structures within the Galaxy, it is difficult in general to precisely date the age at which any one merger occurred. Recent results have revealed a population of stars that were accreted via the collision of a dwarf galaxy, called \textit{Gaia}-Enceladus, leading to a substantial pollution of the chemical and dynamical properties of the Milky Way. Here, we identify the very bright, naked-eye star $\nu$\,Indi as a probe of the age of the early in situ population of the Galaxy. We combine asteroseismic, spectroscopic, astrometric, and kinematic observations to show that this metal-poor, alpha-element-rich star was an indigenous member of the halo, and we measure its age to be $11.0 \pm 0.7$ (stat) $\pm 0.8$ (sys)$\,\rm Gyr$. The star bears hallmarks consistent with it having been kinematically heated by the \textit{Gaia}-Enceladus collision. Its age implies that the earliest the merger could have begun was 11.6 and 13.2 Gyr ago at 68 and 95% confidence, respectively. Input from computations based on hierarchical cosmological models tightens (i.e. reduces) slightly the above limits.

The Transiting Exoplanet Survey Satellite (TESS) is performing a near all-sky survey for planets that transit bright stars. In addition, its excellent photometric precision enables asteroseismology of solar-type and red-giant stars, which exhibit convection-driven, solar-like oscillations. Simulations predict that TESS will detect solar-like oscillations in nearly 100 stars already known to host planets. In this paper, we present an asteroseismic analysis of the known red-giant host stars HD 212771 and HD 203949, both systems having a long-period planet detected through radial velocities. These are the first detections of oscillations in previously known exoplanet-host stars by TESS, further showcasing the mission's potential to conduct asteroseismology of red-giant stars. We estimate the fundamental properties of both stars through a grid-based modeling approach that uses global asteroseismic parameters as input. We discuss the evolutionary state of HD 203949 in depth and note the large discrepancy between its asteroseismic mass ($M_\ast = 1.23 \pm 0.15\,{\rm M}_\odot$ if on the red-giant branch or $M_\ast = 1.00 \pm 0.16\,{\rm M}_\odot$ if in the clump) and the mass quoted in the discovery paper ($M_\ast = 2.1 \pm 0.1\,{\rm M}_\odot$), implying a change $>30\,\%$ in the planet's mass. Assuming HD 203949 to be in the clump, we investigate the planet's past orbital evolution and discuss how it could have avoided engulfment at the tip of the red-giant branch. Finally, HD 212771 was observed by K2 during its Campaign 3, thus allowing for a preliminary comparison of the asteroseismic performances of TESS and K2. We estimate the ratio of the observed oscillation amplitudes for this star to be $A_{\rm max}^{\rm TESS}/A_{\rm max}^{\rm K2} = 0.75 \pm 0.14$, consistent with the expected ratio of $\sim0.85$ due to the redder bandpass of TESS.

Asteroseismic methods offer a means to investigate stellar activity and activity cycles as well as to identify those properties of stars which are crucial for the operation of stellar dynamos. With data from CoRoT and \textit{Kepler}, signatures of magnetic activity have been found in the seismic properties of a few dozen stars. Now, NASA's Transiting Exoplanet Survey Satellite (TESS) mission offers the possibility to expand this, so far, rather exclusive group of stars. This promises to deliver new insight into the parameters that govern stellar magnetic activity as a function of stellar mass, age, and rotation rate. We derive a new scaling relation for the amplitude of the activity-related acoustic (p-mode) frequency shifts that can be expected over a full stellar cycle. Building on a catalogue of synthetic TESS time series, we use the shifts obtained from this relation and simulate the yield of detectable frequency shifts in an extended TESS mission. We find that, according to our scaling relation, we can expect to find significant p-mode frequency shifts for a couple hundred main-sequence and early subgiant stars and for a few thousand late subgiant and low-luminosity red giant stars.

Asteroseismology of solar-like oscillators often relies on the comparisons between stellar models and stellar observations in order to determine the properties of stars. The values of the global seismic parameters, $\nu_\mathrm{max}$ (the frequency where the smoothed amplitude of the oscillations peak) and $\Delta \nu$ (the large frequency separation), are frequently used in grid-based modeling searches. However, the methods by which $\Delta \nu$ is calculated from observed data and how $\Delta \nu$ is calculated from stellar models are not the same. Typically for observed stars, especially for those with low signal-to-noise data, $\Delta \nu$ is calculated by taking the power spectrum of a power spectrum, or with autocorrelation techniques. However, for stellar models, the actual individual mode frequencies are calculated and the average spacing between them directly determined. In this work we try to determine the best way to combine model frequencies in order to obtain $\Delta \nu$ that can be compared with observations. For this we use stars with high signal-to-noise observations from Kepler as well as simulated TESS data of Ball et al. (2018). We find that when determining $\Delta \nu$ from individual mode frequencies the best method is to use the $\ell=0$ modes with either no weighting or with a Gaussian weighting around $\nu_\mathrm{max}$.

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology.

Cool main-sequence, sub-giant and red-giant stars all show solar-like oscillations, pulsations that are excited and intrinsically damped by near-surface convection. Many overtones are typically excited to observable amplitudes, giving a rich spectrum of detectable modes. These modes provide a wealth of information on fundamental stellar properties. However, the radial velocity shifts induced by these oscillations can also be problematic when searching for low-mass, long-period planets; this is because their amplitudes are large enough to completely mask such minute planetary signals. Here we show how fine-tuning exposure times to the stellar parameters can help efficiently average out the solar-like-oscillation-induced shifts. To reduce the oscillation signal to the radial velocity precision commensurate with an Earth-analogue, we find that for cool, low-mass stars (near spectral type K) the necessary exposure times may be as short as 4 minutes, while for hotter, higher-mass stars (near spectral type F, or slightly evolved) the required exposure times can be longer than 100 minutes. We provide guideline exposure durations required to suppress the total observed amplitude due to oscillations to a level of $0.1\,\rm m\,s^{-1}$, and a level corresponding to the Earth-analogue reflex amplitude for the star. Owing to the intrinsic stochastic variability of the oscillations, we recommend in practice choosing short exposure durations at the telescope and then averaging over those exposures later, as guided by our predictions. To summarize, as we enter an era of $0.1\,\rm m\,s^{-1}$ instrumental precision, it is critical to tailor our observing strategies to the stellar properties.

We present the target list of solar-type stars to be observed in short-cadence (2-min) for asteroseismology by the NASA Transiting Exoplanet Survey Satellite (TESS) during its 2-year nominal survey mission. The solar-like Asteroseismic Target List (ATL) is comprised of bright, cool main-sequence and subgiant stars and forms part of the larger target list of the TESS Asteroseismic Science Consortium (TASC). The ATL uses Gaia DR2 and the Extended Hipparcos Compilation (XHIP) to derive fundamental stellar properties, calculate detection probabilities and produce a rank-ordered target list. We provide a detailed description of how the ATL was produced and calculate expected yields for solar-like oscillators based on the nominal photometric performance by TESS. We also provide publicly available source code which can be used to reproduce the ATL, thereby enabling comparisons of asteroseismic results from TESS with predictions from synthetic stellar populations.

A key aspect in the determination of stellar properties is the comparison of observational constraints with predictions from stellar models. Asteroseismic Inference on a Massive Scale (AIMS) is an open source code that uses Bayesian statistics and a Markov Chain Monte Carlo approach to find a representative set of models that reproduce a given set of classical and asteroseismic constraints. These models are obtained by interpolation on a pre-calculated grid, thereby increasing computational efficiency. We test the accuracy of the different operational modes within AIMS for grids of stellar models computed with the Li\`ege stellar evolution code (main sequence and red giants) and compare the results to those from another asteroseismic analysis pipeline, PARAM. Moreover, using artificial inputs generated from models within the grid (assuming the models to be correct), we focus on the impact on the precision of the code when considering different combinations of observational constraints (individual mode frequencies, period spacings, parallaxes, photospheric constraints,...). Our tests show the absolute limitations of precision on parameter inferences using synthetic data with AIMS, and the consistency of the code with expected parameter uncertainty distributions. Interpolation testing highlights the significance of the underlying physics to the analysis performance of AIMS and provides caution as to the upper limits in parameter step size. All tests demonstrate the flexibility and capability of AIMS as an analysis tool and its potential to perform accurate ensemble analysis with current and future asteroseismic data yields.

NASA's Transiting Exoplanet Survey Satellite (TESS) has begun a two-year survey of most of the sky, which will include lightcurves for thousands of solar-like oscillators sampled at a cadence of two minutes. To prepare for this steady stream of data, we present a mock catalogue of lightcurves, designed to realistically mimic the properties of the TESS sample. In the process, we also present the first public release of the asteroFLAG Artificial Dataset Generator, which simulates lightcurves of solar-like oscillators based on input mode properties. The targets are drawn from a simulation of the Milky Way's populations and are selected in the same way as TESS's true Asteroseismic Target List. The lightcurves are produced by combining stellar models, pulsation calculations and semi-empirical models of solar-like oscillators. We describe the details of the catalogue and provide several examples. We provide pristine lightcurves to which noise can be added easily. This mock catalogue will be valuable in testing asteroseismology pipelines for TESS and our methods can be applied in preparation and planning for other observatories and observing campaigns.

Poor modelling of the surface regions of solar-like stars causes a systematic discrepancy between the observed and model pulsation frequencies. We aim to characterise this frequency discrepancy for main sequence solar-like oscillators for a wide range of initial masses and metallicities. We fit stellar models to the observed mode frequencies of the 67 stars, including the Sun, in the $Kepler$ LEGACY sample, using three different empirical surface corrections. The three surface corrections we analyse are a frequency power-law, a cubic frequency term divided by the mode inertia, and a linear combination of an inverse and cubic frequency term divided by the mode inertia. We construct a grid of stellar evolution models using the stellar evolution code MESA and calculate mode frequencies using GYRE. We scale the frequencies of each stellar model by an empirical calculated homology coefficient, which greatly improves the robustness of our grid. We calculate stellar parameters and surface corrections for each star using the average of the best-fitting models from each evolutionary track, weighted by the likelihood of each model. The resulting model stellar parameters agree well with an independent reference, the $\texttt{BASTA}$ pipeline. However, we find that the adopted physics of the stellar models has a greater impact on the fitted stellar parameters than the choice of correction method. We find that scaling the frequencies by the mode inertia improves the fit between the models and observations. The inclusion of the inverse frequency term produces substantially better model fits to lower surface gravity stars.

Stellar evolution codes play a major role in present-day astrophysics, yet they share common simplifications related to the outer layers of stars. We seek to improve on this by the use of results from realistic and highly detailed 3D hydrodynamics simulations of stellar convection. We implement a temperature stratification extracted directly from the 3D simulations into two stellar evolution codes to replace the simplified atmosphere normally used. Our implementation also contains a non-constant mixing-length parameter, which varies as a function of the stellar surface gravity and temperature -- also derived from the 3D simulations. We give a detailed account of our fully consistent implementation and compare to earlier works, and also provide a freely available MESA-module. The evolution of low-mass stars with different masses is investigated, and we present for the first time an asteroseismic analysis of a standard solar model utilising calibrated convection and temperature stratification from 3D simulations. We show that the inclusion of 3D results have an almost insignificant impact on the evolution and structure of stellar models -- the largest effect are changes in effective temperature of order 30 K seen in the pre-main sequence and in the red-giant branch. However, this work provides the first step for producing self-consistent evolutionary calculations using fully incorporated 3D atmospheres from on-the-fly interpolation in grids of simulations.

The internal structures and properties of oscillating red-giant stars can be accurately inferred through their global oscillation modes (asteroseismology). Based on 1460 days of Kepler observations we perform a thorough asteroseismic study to probe the stellar parameters and evolutionary stages of three red giants in eclipsing binary systems. We present the first detailed analysis of individual oscillation modes of the red-giant components of KIC 8410637, KIC5640750 and KIC9540226. We obtain estimates of their asteroseismic masses, radii, mean densities and logarithmic surface gravities by using the asteroseismic scaling relations as well as grid-based modelling. As these red giants are in double-lined eclipsing binaries, it is possible to derive their independent dynamical masses and radii from the orbital solution and compare it with the seismically inferred values. For KIC 5640750 we compute the first spectroscopic orbit based on both components of this system. We use high-resolution spectroscopic data and light curves of the three systems to determine up-to-date values of the dynamical stellar parameters. With our comprehensive set of stellar parameters we explore consistencies between binary analysis and asteroseismic methods, and test the reliability of the well-known scaling relations. For the three red giants under study, we find agreement between dynamical and asteroseismic stellar parameters in cases where the asteroseismic methods account for metallicity, temperature and mass dependence as well as surface effects. We are able to attain agreement from the scaling laws in all three systems if we use $\Delta\nu_{\rm ref,emp} = 130.8 \pm 0.9\,\mu$Hz instead of the usual solar reference value.

Individual mode frequencies have been detected in thousands of individual solar-like oscillators on the red giant branch (RGB). Fitting stellar models to these mode frequencies, however, is more difficult than in main-sequence stars. This is partly because of the uncertain magnitude of the surface effect: the systematic difference between observed and modelled frequencies caused by poor modelling of the near-surface layers. We aim to study the magnitude of the surface effect in RGB stars. Surface effect corrections used for main-sequence targets are potentially large enough to put the non-radial mixed modes in RGB stars out of order, which is unphysical. Unless this can be circumvented, model-fitting of evolved RGB stars is restricted to the radial modes, which reduces the number of available modes. Here, we present a method to suppress gravity modes (g-modes) in the cores of our stellar models, so that they have only pure pressure modes (p-modes). We show that the method gives unbiased results and apply it to three RGB solar-like oscillators in double-lined eclipsing binaries: KIC 8410637, KIC 9540226 and KIC 5640750. In all three stars, the surface effect decreases the model frequencies consistently by about 0.1--0.3 $\mu$Hz at the frequency of maximum oscillation power $\nu_\mathrm{max}$, which agrees with existing predictions from three-dimensional radiation hydrodynamics simulations. Though our method in essence discards information about the stellar cores, it provides a useful step forward in understanding the surface effect in RGB stars.

We present a method for measuring internal stellar structure based on asteroseismology that we call "inversions for agreement." The method accounts for imprecise estimates of stellar mass and radius as well as the relatively limited oscillation mode sets that are available for distant stars. By construction, the results of the method are independent of stellar models. We apply this method to measure the isothermal sound speeds in the cores of the solar-type stars 16 Cyg A and B using asteroseismic data obtained from Kepler observations. We compare the asteroseismic structure that we deduce against best-fitting evolutionary models and find that the sound speeds in the cores of these stars exceed those of the models.

Stellar models rely on a number of free parameters. High-quality observations of eclipsing binary stars observed by Kepler offer a great opportunity to calibrate model parameters for evolved stars. Our study focuses on six Kepler red giants with the goal of calibrating the mixing-length parameter of convection as well as the asteroseismic surface term in models. We introduce a new method to improve the identification of oscillation modes which exploits theoretical frequencies to guide the mode identification ('peak-bagging') stage of the data analysis. Our results indicate that the convective mixing-length parameter (alpha) is about 14% larger for red giants than for the Sun, in agreement with recent results from modelling the APOGEE stars. We found that the asteroseismic surface term (i.e. the frequency offset between the observed and predicted modes) correlates with stellar parameters (Teff, log g) and the mixing-length parameter. This frequency offset generally decreases as giants evolve. The two coefficients a_-1 and a_3 for the inverse and cubic terms that have been used to describe the surface term correction are found to correlate linearly. The effect of the surface term is also seen in the p-g mixed modes, however, established methods for correcting the effect are not able to properly correct the g-dominated modes in late evolved stars.

Inaccurate modelling of the near-surface layers of solar models causes a systematic difference between modelled and observed solar mode frequencies. This difference---known as the "surface effect" or "surface term"---presumably also exists in other solar-like oscillators and must somehow be corrected to accurately relate mode frequencies to stellar model parameters. After briefly describing the various potential causes of surface effects, I will review recent progress along two different lines. First, various methods have been proposed for removing the surface effect from the mode frequencies and thereby fitting stellar models without the disproportionate influence of the inaccurate near-surface layers. Second, three-dimensional radiation hydrodynamics simulations are now being used to replace the near-surface layers of stellar models across a range of spectral types, leading to predictions of how some components of the surface effect vary between stars. Finally, I shall briefly discuss the future of the problem in terms of both modelling and observation.

(Abridged) We present the first APOKASC catalog of spectroscopic and asteroseismic data for 415 dwarfs and subgiants. Asteroseismic data have been obtained by Kepler in short cadence. The spectroscopic parameters are based on spectra taken as part of APOGEE and correspond to DR13 of SDSS. We analyze our data using two Teff scales, the spectroscopic values from DR13 and those derived from SDSS griz photometry. We use the differences in our results arising from these choices as a test of systematic Teff, and find that they can lead to significant differences in the derived stellar properties. Determinations of surface gravity ($\log{g}$), mean density ($\rho$), radius ($R$), mass ($M$), and age ($\tau$) for the whole sample have been carried out with stellar grid-based modeling. We have assessed random and systematic error sources in the spectroscopic and seismic data, as well as in the grid-based modeling determination of the stellar quantities in the catalog. We provide stellar properties for both Teff scales. The median combined (random and systematic) uncertainties are 2% (0.01 dex; $\log{g}$), 3.4% ($\rho$), 2.6% ($R$), 5.1% ($M$), and 19% ($\tau$) for the photometric Teff scale and 2% ($\log{g}$), 3.5% ($\rho$), 2.7% ($R$), 6.3% ($M$), and 23% ($\tau$) for the spectroscopic scale. Comparisons with stellar quantities in the catalog by Chaplin et al.(2014) highlight the importance of metallicity measurements for determining stellar parameters accurately. We compare our results with those from other sources, including stellar radii determined from TGAS parallaxes and asteroseismic analyses based on individual frequencies. We find a very good agreement in all cases. Comparisons give strong support to the determination of stellar quantities based on global seismology, a relevant result for future missions such as TESS and PLATO. Table 5 corrected (wrongly listed SDSS Teff before).

Rotational shear in Sun-like stars is thought to be an important ingredient in models of stellar dynamos. Thanks to helioseismology, rotation in the Sun is characterized well, but the interior rotation profiles of other Sun-like stars are not so well constrained. Until recently, measurements of rotation in Sun-like stars have focused on the mean rotation, but little progress has been made on measuring or even placing limits on differential rotation. Using asteroseismic measurements of rotation we aim to constrain the radial shear in five Sun-like stars observed by the NASA Kepler mission: KIC004914923, KIC005184732, KIC006116048, KIC006933899, and KIC010963065. We used stellar structure models for these five stars from previous works. These models provide the mass density, mode eigenfunctions, and the convection zone depth, which we used to compute the sensitivity kernels for the rotational frequency splitting of the modes. We used these kernels as weights in a parametric model of the stellar rotation profile of each star, where we allowed different rotation rates for the radiative interior and the convective envelope. This parametric model was incorporated into a fit to the oscillation power spectrum of each of the five Kepler stars. This fit included a prior on the rotation of the envelope, estimated from the rotation of surface magnetic activity measured from the photometric variability. The asteroseismic measurements without the application of priors are unable to place meaningful limits on the radial shear. Using a prior on the envelope rotation enables us to constrain the interior rotation rate and thus the radial shear. In the five cases that we studied, the interior rotation rate does not differ from the envelope by more than approximately +/-30%. Uncertainties in the rotational splittings are too large to unambiguously determine the sign of the radial shear.

We examine the frequency shifts in low-degree helioseismic modes from the Birmingham Solar-Oscillations Network (BiSON) covering the period from 1985 - 2016, and compare them with a number of global activity proxies well as a latitudinally-resolved magnetic index. As well as looking at frequency shifts in different frequency bands, we look at a parametrization of the shift as a cubic function of frequency. While the shifts in the medium- and highfrequency bands are very well correlated with all of the activity indices (with the best correlation being with the 10.7 cm radio flux), we confirm earlier findings that there appears to have been a change in the frequency response to activity during solar cycle 23, and the low frequency shifts are less correlated with activity in the last two cycles than they were in Cycle 22. At the same time, the more recent cycles show a slight increase in their sensitivity to activity levels at medium and higher frequencies, perhaps because a greater proportion of activity is composed of weaker or more ephemeral regions. This lends weight to the speculation that a fundamental change in the nature of the solar dynamo may be in progress.

With the advent of dedicated photometric space missions, the ability to rapidly process huge catalogues of stars has become paramount. Bellinger and Angelou et al. (2016) recently introduced a new method based on machine learning for inferring the stellar parameters of main-sequence stars exhibiting solar-like oscillations. The method makes precise predictions that are consistent with other methods, but with the advantages of being able to explore many more parameters while costing practically no time. Here we apply the method to 52 so-called "LEGACY" main-sequence stars observed by the Kepler space mission. For each star, we present estimates and uncertainties of mass, age, radius, luminosity, core hydrogen abundance, surface helium abundance, surface gravity, initial helium abundance, and initial metallicity as well as estimates of their evolutionary model parameters of mixing length, overshooting coefficient, and diffusion multiplication factor. We obtain median uncertainties in stellar age, mass, and radius of 14.8%, 3.6%, and 1.7%, respectively. The source code for all analyses and for all figures appearing in this manuscript can be found electronically at: https://github.com/earlbellinger/asteroseismology

Accurate modelling of solar-like oscillators requires that modelled mode frequencies are corrected for the systematic shift caused by improper modelling of the near-surface layers, known as the surface effect. ... We investigate how much additional uncertainty is introduced to stellar model parameters by our uncertainty about the functional form of the surface effect. At the same time, we test whether any of the parametrizations is significantly better or worse at modelling observed subgiants and low-luminosity red giants. We model six stars observed by Kepler that show clear mixed modes. We fix the input physics of the stellar models and vary the choice of surface correction ... Models using a solar-calibrated power law correction consistently fit the observations more poorly than the other four corrections. Models with the remaining four corrections generally fit ... about equally well, with the combined surface correction by Ball & Gizon perhaps being marginally superior. The fits broadly agree on the model parameters within about the $2\sigma$ uncertainties, with discrepancies between the modified Lorentzian and free power law corrections occasionally exceeding the $3\sigma$ level. Relative to the best-fitting values, the total uncertainties on the masses, radii and ages of the stars are all less than 2, 1 and 6 per cent, respectively. A solar-calibrated power law ... appears unsuitable for use with more evolved solar-like oscillators. Among the remaining surface corrections, the uncertainty in the model parameters introduced by the surface effects is about twice as large as the uncertainty in the individual fits for these six stars. Though the fits are thus somewhat less certain because of our uncertainty of how to manage the surface effect, these results also demonstrate that it is feasible to model the individual mode frequencies of subgiants and low-luminosity red giants. ...

We use asteroseismic data from the Kepler satellite to determine fundamental stellar properties of the 66 main-sequence targets observed for at least one full year by the mission. We distributed tens of individual oscillation frequencies extracted from the time series of each star among seven modelling teams who applied different methods to determine radii, masses, and ages for all stars in the sample. Comparisons among the different results reveal a good level of agreement in all stellar properties, which is remarkable considering the variety of codes, input physics and analysis methods employed by the different teams. Average uncertainties are of the order of $\sim$2\% in radius, $\sim$4\% in mass, and $\sim$10\% in age, making this the best-characterised sample of main-sequence stars available to date. Our predicted initial abundances and mixing-length parameters are checked against inferences from chemical enrichment laws $\Delta Y / \Delta Z$ and predictions from 3D atmospheric simulations. We test the accuracy of the determined stellar properties by comparing them to the Sun, angular diameter measurements, Gaia parallaxes, and binary evolution, finding excellent agreement in all cases and further confirming the robustness of asteroseismically-determined physical parameters of stars when individual frequencies of oscillation are available. Baptised as the Kepler dwarfs LEGACY sample, these stars are the solar-like oscillators with the best asteroseismic properties available for at least another decade. All data used in this analysis and the resulting stellar parameters are made publicly available for the community.

The advent of space-based missions like $Kepler$ has revolutionized the study of solar-type stars, particularly through the measurement and modeling of their resonant modes of oscillation. Here we analyze a sample of 66 $Kepler$ main-sequence stars showing solar-like oscillations as part of the $Kepler$ seismic LEGACY project. We use $Kepler$ short-cadence data, of which each star has at least 12 months, to create frequency power spectra optimized for asteroseismology. For each star we identify its modes of oscillation and extract parameters such as frequency, amplitude, and line width using a Bayesian Markov chain Monte Carlo `peak-bagging' approach. We report the extracted mode parameters for all 66 stars, as well as derived quantities such as frequency difference ratios, the large and small separations $\Delta\nu$ and $\delta\nu_{02}$; the behavior of line widths with frequency and line widths at $\nu_{\rm max}$ with $T_{\rm eff}$, for which we derive parametrizations; and behavior of mode visibilities. These average properties can be applied in future peak-bagging exercises to better constrain the parameters of the stellar oscillation spectra. The frequencies and frequency ratios can tightly constrain the fundamental parameters of these solar-type stars, and mode line widths and amplitudes can test models of mode damping and excitation.

The solar-cyle variation of acoustic mode frequencies has a frequency dependence related to the inverse mode inertia. The discrepancy between model predictions and measured oscillation frequencies for solar and solar-type stellar acoustic modes includes a significant frequency-dependent term known as the surface term that is also related to the inverse mode inertia. We parametrize both the surface term and the frequency variations for low-degree solar data from Birmingham Solar-Oscillations Network (BiSON) and medium-degree data from the Global Oscillations Network Group (GONG) using the mode inertia together with cubic and inverse frequency terms. We find that for the central frequency of rotationally split multiplets the cubic term dominates both the average surface term and the temporal variation, but for the medium-degree case the inverse term improves the fit to the temporal variation. We also examine the variation of the even-order splitting coefficients for the medium-degree data and find that, as for the central frequency, the latitude-dependent frequency variation, which reflects the changing latitudinal distribution of magnetic activity over the solar cycle, can be described by the combination of a cubic and an inverse function of frequency scaled by inverse mode inertia. The results suggest that this simple parametrization could be used to assess the activity-related frequency variation in solar-like asteroseismic targets.

Binary star systems are important for understanding stellar structure and evolution, and are especially useful when oscillations can be detected and analysed with asteroseismology. However, only four systems are known in which solar-like oscillations are detected in both components. Here, we analyse the fifth such system, HD 176465, which was observed by Kepler. We carefully analysed the system's power spectrum to measure individual mode frequencies, adapting our methods where necessary to accommodate the fact that both stars oscillate in a similar frequency range. We also modelled the two stars independently by fitting stellar models to the frequencies and complementary parameters. We are able to cleanly separate the oscillation modes in both systems. The stellar models produce compatible ages and initial compositions for the stars, as is expected from their common and contemporaneous origin. Combining the individual ages, the system is about 3.0$\pm$0.5 Gyr old. The two components of HD 176465 are young physically-similar oscillating solar analogues, the first such system to be found, and provide important constraints for stellar evolution and asteroseismology.

Owing to the remarkable photometric precision of space observatories like Kepler, stellar and planetary systems beyond our own are now being characterized en masse for the first time. These characterizations are pivotal for endeavors such as searching for Earth-like planets and solar twins, understanding the mechanisms that govern stellar evolution, and tracing the dynamics of our Galaxy. The volume of data that is becoming available, however, brings with it the need to process this information accurately and rapidly. While existing methods can constrain fundamental stellar parameters such as ages, masses, and radii from these observations, they require substantial computational efforts to do so. We develop a method based on machine learning for rapidly estimating fundamental parameters of main-sequence solar-like stars from classical and asteroseismic observations. We first demonstrate this method on a hare-and-hound exercise and then apply it to the Sun, 16 Cyg A & B, and 34 planet-hosting candidates that have been observed by the Kepler spacecraft. We find that our estimates and their associated uncertainties are comparable to the results of other methods, but with the additional benefit of being able to explore many more stellar parameters while using much less computation time. We furthermore use this method to present evidence for an empirical diffusion-mass relation. Our method is open source and freely available for the community to use. The source code for all analyses and for all figures appearing in this manuscript can be found electronically at https://github.com/earlbellinger/asteroseismology

... [C]urrent stellar models predict oscillation frequencies that are systematically affected by simplified modelling of the near-surface layers. We use three-dimensional radiation hydrodynamics simulations to better model the near-surface equilibrium structure of dwarfs with spectral types F3, G2, K0 and K5, and examine the differences between oscillation mode frequencies. ... We precisely match stellar models to the simulations' gravities and effective temperatures at the surface, and to the temporally- and horizontally-averaged densities and pressures at their deepest points. We then replace the near-surface structure with that of the averaged simulation and compute the change in the oscillation mode frequencies. We also fit the differences using several parametric models currently available in the literature. The surface effect in the stars of solar-type and later is qualitatively similar and changes steadily with decreasing effective temperature. In particular, the point of greatest frequency difference decreases slightly as a fraction of the acoustic cut-off frequency and the overall scale of the surface effect decreases. The surface effect in the hot, F3-type star follows the same trend in scale (i.e. it is larger in magnitude) but shows a different overall variation with mode frequency. We find that the two-term fit by Ball & Gizon (2014) is best able to reproduce the surface terms across all four spectral types, although the scaled solar term and a modified Lorentzian function also match the three cooler simulations reasonably well. ... Our simplified results suggest that the surface effect is generally larger in hotter stars (and correspondingly smaller in cooler stars) and of similar shape in stars of solar type and cooler. However, we cannot presently predict whether this will remain so when other components of the surface effect are included.

Context: Detailed oscillation spectra comprising individual frequencies for numerous solar-type stars and red giants are or will become available. These data can lead to a precise characterisation of stars. Aims: Our goal is to test and compare different methods for obtaining stellar properties from oscillation frequencies and spectroscopic constraints, in order to evaluate their accuracy and the reliability of the error bars. Methods: In the context of the SpaceInn network, we carried out a hare-and-hounds exercise in which one group produced "observed" oscillation spectra for 10 artificial solar-type stars, and various groups characterised these stars using either forward modelling or acoustic glitch signatures. Results: Results based on the forward modelling approach were accurate to 1.5 % (radius), 3.9 % (mass), 23 % (age), 1.5 % (surface gravity), and 1.8 % (mean density). For the two 1 Msun stellar targets, the accuracy on the age is better than 10 % thereby satisfying PLATO 2.0 requirements. The average accuracies for the acoustic radii of the base of the convection zone, the He II ionisation, and the Gamma_1 peak were 17 %, 2.4 %, and 1.9 %, respectively. Glitch fitting analysis seemed to be affected by aliasing problems for some of the targets. Conclusions: Forward modelling is the most accurate approach, but needs to be complemented by model-independent results from, e.g., glitch analysis. Furthermore, global optimisation algorithms provide more robust error bars.

Radial differential rotation is an important parameter for stellar dynamo theory and for understanding angular momentum transport. We investigate the potential of using a large number of similar stars simultaneously to constrain their average radial differential rotation gradient: we call this 'ensemble fitting'. We use a range of stellar models along the main sequence, each with a synthetic rotation profile. The rotation profiles are step functions with a step of -350 nHz, which is located at the base of the convection zone. These models are used to compute the rotational splittings of the p modes and to model their uncertainties. We then fit an ensemble of stars to infer the average step size. All the uncertainties on the inferred step size for individual stars are of the order 1 micro Hz. Using 15 stellar models in an ensemble fit, we show that the uncertainty on the average step size is reduced to less than the input step size, which allows us to constrain the sign of the radial differential rotation. We show that a solar-like step size (approximately 30 nHz) can be constrained by an ensemble fit of thousands of main-sequence stars. Observing the number of stars required to successfully exploit the ensemble fitting method will be possible with future asteroseismology missions, such as PLATO. We demonstrate the potential of ensemble fitting by showing that any systematic differences in the average step size between F, G, and K-type stars larger than 100 nHz can be detected.

We quantify the effect of observational spectroscopic and asteroseismic uncertainties on regularised least squares (RLS) inversions for the radial differential rotation of Sun-like and subgiant stars. We first solved the forward problem to model rotational splittings plus the observed uncertainties for models of a Sun-like star, HD 52265, and a subgiant star, KIC 7341231. We randomly perturbed the parameters of the stellar models within the uncertainties of the spectroscopic and asteroseismic constraints and used these perturbed stellar models to compute rotational splittings. We experimented with three rotation profiles: solid body rotation, a step function, and a smooth rotation profile decreasing with radius. We then solved the inverse problem to infer the radial differential rotation profile using a RLS inversion and kernels from the best-fit stellar model.We found that the inversions for Sun-like stars with solar-like radial differential rotation profiles are insensitive to the uncertainties in the stellar models. We found that when the rotation rate below the convection zone is increased to six times that of the surface rotation rate the inferred rotation profile excluded solid body rotation. With the current observational uncertainties, we found that inversions of subgiant stars are sensitive to the uncertainties in the stellar model. Our findings suggest that inversions for the radial differential rotation of subgiant stars would benefit from more tightly constrained stellar models. In Sun-like stars, the insensitivity of the inversions to stellar model uncertainties suggests that it may be possible to perform ensemble inversions for the average radial differential rotation of many stars with a range of stellar types to better constrain the inversions.

In previous work we identified six Sun-like stars observed by Kepler with exceptionally clear asteroseismic signatures of rotation. Here, we show that five of these stars exhibit surface variability suitable for measuring rotation. In order to further constrain differential rotation, we compare the rotation periods obtained from light-curve variability with those from asteroseismology. The two rotation measurement methods are found to agree within uncertainties, suggesting that radial differential rotation is weak, as is the case for the Sun. Furthermore, we find significant discrepancies between ages from asteroseismology and from three different gyrochronology relations, implying that stellar age estimation is problematic even for Sun-like stars.

We present the first detections by the NASA K2 Mission of oscillations in solar-type stars, using short-cadence data collected during K2 Campaign\,1 (C1). We understand the asteroseismic detection thresholds for C1-like levels of photometric performance, and we can detect oscillations in subgiants having dominant oscillation frequencies around $1000\,\rm \mu Hz$. Changes to the operation of the fine-guidance sensors are expected to give significant improvements in the high-frequency performance from C3 onwards. A reduction in the excess high-frequency noise by a factor of two-and-a-half in amplitude would bring main-sequence stars with dominant oscillation frequencies as high as ${\simeq 2500}\,\rm \mu Hz$ into play as potential asteroseismic targets for K2.

Total solar irradiance and UV spectral solar irradiance have been monitored since 1978 through a succession of space missions. This is accompanied by the development of models aimed at replicating solar irradiance by relating the variability to solar magnetic activity. The NRLSSI and SATIRE-S models provide the most comprehensive reconstructions of total and spectral solar irradiance over the period of satellite observation currently available. There is persistent controversy between the various measurements and models in terms of the wavelength dependence of the variation over the solar cycle, with repercussions on our understanding of the influence of UV solar irradiance variability on the stratosphere. We review the measurement and modelling of UV solar irradiance variability over the period of satellite observation. The SATIRE-S reconstruction is consistent with spectral solar irradiance observations where they are reliable. It is also supported by an independent, empirical reconstruction of UV spectral solar irradiance based on UARS/SUSIM measurements from an earlier study. The weaker solar cycle variability produced by NRLSSI between 300 and 400 nm is not evident in any available record. We show that although the method employed to construct NRLSSI is principally sound, reconstructed solar cycle variability is detrimentally affected by the uncertainty in the SSI observations it draws upon in the derivation. Based on our findings, we recommend, when choosing between the two models, the use of SATIRE-S for climate studies.

We investigate the relationship between spectral solar irradiance (SSI) and ozone in the tropical upper stratosphere. We find that solar cycle (SC) changes in ozone can be well approximated by considering the ozone response to SSI changes in a small number individual wavelength bands between 176 and 310 nm, operating independently of each other. Additionally, we find that the ozone varies approximately linearly with changes in the SSI. Using these facts, we present a Bayesian formalism for inferring SC SSI changes and uncertainties from measured SC ozone profiles. Bayesian inference is a powerful, mathematically self-consistent method of considering both the uncertainties of the data and additional external information to provide the best estimate of parameters being estimated. Using this method, we show that, given measurement uncertainties in both ozone and SSI datasets, it is not currently possible to distinguish between observed or modelled SSI datasets using available estimates of ozone change profiles, although this might be possible by the inclusion of other external constraints. Our methodology has the potential, using wider datasets, to provide better understanding of both variations in SSI and the atmospheric response.

Space-based observations of solar-like oscillations present an opportunity to constrain stellar models using individual mode frequencies. However, current stellar models are inaccurate near the surface, which introduces a systematic difference that must be corrected. We introduce and evaluate two parametrizations of the surface corrections based on formulae given by Gough (1990). The first we call a cubic term proportional to $\nu^3/\mathcal{I}$ and the second has an additional inverse term proportional to $\nu^{-1}/\mathcal{I}$, where $\nu$ and $\mathcal{I}$ are the frequency and inertia of an oscillation mode. We first show that these formulae accurately correct model frequencies of two different solar models ... We then incorporate the parametrizations into a modelling pipeline that simultaneously fits the surface effects and the underlying stellar model parameters. We apply this pipeline to synthetic observations of a Sun-like stellar model, solar observations degraded to typical asteroseismic uncertainties, and observations of the well-studied CoRoT target HD52265. For comparison, we also run the pipeline with the scaled power-law correction proposed by Kjeldsen et al. (2008). The fits to synthetic and degraded solar data show that the method is unbiased and produces best-fit parameters that are consistent with the input models and known parameters of the Sun. Our results for HD52265 are consistent with previous modelling efforts and the magnitude of the surface correction is similar to that of the Sun. The fit using a scaled power-law correction is significantly worse but yields consistent parameters ... We find that the cubic term alone is suitable for asteroseismic applications and it is easy to implement in an existing pipeline. ... This parametrization is thus a useful new way to correct model frequencies so that observations of individual mode frequencies can be exploited.

We present a revised and extended total and spectral solar irradiance (SSI) reconstruction, which includes a wavelength-dependent uncertainty estimate, spanning the last three solar cycles using the SATIRE-S model. The SSI reconstruction covers wavelengths between 115 and 160,000 nm and all dates between August 1974 and October 2009. This represents the first full-wavelength SATIRE-S reconstruction to cover the last three solar cycles without data gaps and with an uncertainty estimate. SATIRE-S is compared with the NRLSSI model and SORCE/SOLSTICE ultraviolet (UV) observations. SATIRE-S displays similar cycle behaviour to NRLSSI for wavelengths below 242 nm and almost twice the variability between 242 and 310 nm. During the decline of last solar cycle, between 2003 and 2008, SSI from SORCE/SOLSTICE version 12 and 10 typically displays more than three times the variability of SATIRE-S between 200 and 300 nm. All three datasets are used to model changes in stratospheric ozone within a 2D atmospheric model for a decline from high solar activity to solar minimum. The different flux changes result in different modelled ozone trends. Using NRLSSI leads to a decline in mesospheric ozone, while SATIRE-S and SORCE/SOLSTICE result in an increase. Recent publications have highlighted increases in mesospheric ozone when considering version 10 SORCE/SOLSTICE irradiances. The recalibrated SORCE/SOLSTICE version 12 irradiances result in a much smaller mesospheric ozone response than when using version 10 and now similar in magnitude to SATIRE-S. This shows that current knowledge of variations in spectral irradiance is not sufficient to warrant robust conclusions concerning the impact of solar variability on the atmosphere and climate.

The Sun and stars with low magnetic activity levels, become photometrically brighter when their activity increases. Magnetically more active stars display the opposite behaviour and get fainter when their activity increases. We reproduce the observed photometric trends in stellar variations with a model that treats stars as hypothetical Suns with coverage by magnetic features different from that of the Sun. The presented model attributes the variability of stellar spectra to the imbalance between the contributions from different components of the solar atmosphere, such as dark starspots and bright faculae. A stellar spectrum is calculated from spectra of the individual components, by weighting them with corresponding disc area coverages. The latter are obtained by extrapolating the solar dependences of spot and facular disc area coverages on chromospheric activity to stars with different levels of mean chromospheric activity. We have found that the contribution by starspots to the variability increases faster with chromospheric activity than the facular contribution. This causes the transition from faculae-dominated variability and direct activity--brightness correlation to spot-dominated variability and inverse activity--brightness correlation with increasing chromospheric activity level. We have shown that the regime of the variability also depends on the angle between the stellar rotation axis and the line-of-sight and on the latitudinal distribution of active regions on the stellar surface. Our model can be used as a tool to extrapolate the observed photometric variability of the Sun to Sun-like stars at different activity levels, which makes possible the direct comparison between solar and stellar irradiance data.

Context: Recently, the CoRoT target HD 175272 (F5V), which shows a weak signal of solar-like oscillations, was modelled by a differential asteroseismic analysis (Ozel et al. 2013) relative to a seismically similar star, HD 181420 (F2V), for which there is a clear signature of solar-like oscillations. The results provided by Ozel et al. (2013) indicate the possibility of HD 175272 having subsolar mass, while being of the order of 1000 K hotter than the Sun. This seems unphysical -- standard stellar evolution theory generally does not predict solar-metallicity stars of subsolar mass to be hotter than about 6000K -- and calls for a reanalysis of this star. Aims: We aim to compare the performance of differential asteroseismic analysis with that of grid-based modelling. Methods: We use two sets of stellar model grids and two grid-fitting methods to model HD 175272 and HD 181420. Results: We find that we are able to model both stars with parameters that are both mutually compatible and comparable with other modelling efforts. Hence, with modest spectroscopic and asteroseismic inputs, we obtain reasonable estimates of stellar parameters. In the case of HD 175272, the uncertainties of the stellar parameters from our grid-based modelling are smaller, and hence more physical, than those reported in the differential analysis. Conclusions: Grid-based modelling provides more precise and more realistic results than obtained with differential seismology.

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

We use asteroseismic data obtained by the NASA Kepler Mission to estimate the fundamental properties of more than 500 main-sequence and sub-giant stars. Data obtained during the first 10 months of Kepler science operations were used for this work, when these solar-type targets were observed for one month each in a survey mode. Stellar properties have been estimated using two global asteroseismic parameters and complementary photometric and spectroscopic data. Homogeneous sets of effective temperatures were available for the entire ensemble from complementary photometry; spectroscopic estimates of T_eff and [Fe/H] were available from a homogeneous analysis of ground-based data on a subset of 87 stars. [Abbreviated version... see paper for full abstract.]

High-quality data from space-based observatories present an opportunity to fit stellar models to observations of individually-identified oscillation frequencies, not just the large and small frequency separations. But such fits require the evaluation of a large number of accurate stellar models, which remains expensive. Here, we show that global-mode oscillation frequencies interpolated in a grid of stellar models are precise and accurate, at least in the neighbourhood of a solar model.

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimistic for observations in the ecliptic, provided that pointing resets of the spacecraft during regular desaturations of the two functioning reaction wheels are accurate at the < 1 arcsec level. This would make it possible to apply a post-hoc analysis that would recover most of the lost photometric precision. Without this post-hoc correction---and the accurate re-pointing it requires---the performance would probably be as poor as in the Kepler-field case. Critical to our conclusions for both fields is the assumed level of pointing noise (in the short-term jitter and the longer-term drift). We suggest that further tests will be needed to clarify our results once more detail and data on the expected pointing performance becomes available, and we offer our assistance in this work.

The mechanism by which the supermassive black holes that power bright quasars at high redshift form remains unknown. One possibility is that ... the monolithic collapse of a massive protogalactic disc ... leads to the formation of a quasi-star: a growing black hole, initially of typical stellar-mass, embedded in a hydrostatic giant-like envelope. Quasi-stars are the main object of study in this dissertation. ... In Chapter 1, I introduce the problem posed by the supermassive black holes that power high-redshift quasars. ... In Chapter 2, I outline the Cambridge STARS code and the modifications that are made to model quasi-star envelopes. In Chapter 3, I present models of quasi-stars where the base of the envelope is located at the Bondi radius of the black hole. The black holes in these models are subject to a robust upper fractional mass limit of about one tenth. In addition, the final black hole mass is sensitive to the choice of the inner boundary radius of the envelope. In Chapter 4, I construct alternative models of quasi-stars by drawing from work on convection- and advection-dominated accretion flows ... The evolution of these quasi-stars is qualitatively different from those described in Chapter 3. ... [T]he core black holes are no longer subject to a fractional mass limit and ultimately accrete all of the material in their envelopes. In Chapter 5, I demonstrate that the fractional mass limit found in Chapter 3 ... is in essence the same as the Sch\"onberg-Chandrasekhar limit. The analysis demonstrates ... that limits exist under a wider range of circumstances than previously thought. A test is provided that determines whether a composite polytrope is at a fractional mass limit. In Chapter 6, I apply this test to realistic stellar models and find evidence that the existence of fractional mass limits is connected to the evolution of stars into the red giants.

The existence of bright quasars at high redshifts implies that supermassive black holes were able to form in the early Universe. Though a number of mechanisms to achieve this have been proposed, none yet stands out. A recent suggestion is the formation of quasi-stars, initially stellar-mass black holes accreting from hydrostatic giant-like envelopes of gas, formed from the monolithic collapse of pre-galactic gas clouds. In this work, we modify the Cambridge STARS stellar evolution package to construct detailed models of the evolution of these objects. We find that, in all of our models, the black hole inside the envelope is able to reach slightly more than one-tenth of the total mass of the system before hydrostatic equilibrium breaks down. This breakdown occurs after a few million years of evolution. We show that the mechanism which causes the hydrostatic evolution to end is present in polytropic models. We also show that the solutions are highly sensitive to the size of the inner boundary radius and that no physical solutions exist if the inner boundary is chosen to be less than about 0.3 of the Bondi radius.

Context: The study of variations in total solar irradiance (TSI) is important for understanding how the Sun affects the Earth's climate. Aims: Full-disk continuum images and magnetograms are now available for three full solar cycles. We investigate how modelled TSI compares with direct observations by building a consistent modelled TSI dataset. The model, based only on changes in the photospheric magnetic flux can then be tested on rotational, cyclical and secular timescales. Methods: We use Kitt Peak and SoHO/MDI continuum images and magnetograms in the SATIRE-S model to reconstruct TSI over cycles 21-23. To maximise independence from TSI composites, SORCE/TIM TSI data are used to fix the one free parameter of the model. We compare and combine the separate data sources for the model to estimate an uncertainty on the reconstruction and prevent any additional free parameters entering the model. Results: The reconstruction supports the PMOD composite as being the best historical record of TSI observations, although on timescales of the solar rotation the IRMB composite provides somewhat better agreement. Further to this, the model is able to account for 92% of TSI variations from 1978 to 2009 in the PMOD composite and over 96% during cycle 23. The reconstruction also displays an inter-cycle, secular decline of 0.20 (+0.12 / -0.09) Wm-2 between cycle 23 minima, in agreement with the PMOD composite. Conclusions: SATIRE-S is able to recreate TSI observations on all timescales of a day and longer over 31 years from 1978. This is strong evidence that changes in photospheric magnetic flux alone are responsible for almost all solar irradiance variations over the last three solar cycles.

The Sch\"onberg-Chandrasekhar (SC) limit is a well-established result in the understanding of stellar evolution. It provides an estimate of the point at which an evolved isothermal core embedded in an extended envelope begins to contract. We investigate contours of constant fractional mass in terms of homology invariant variables U and V and find that the SC limit exists because the isothermal core solution does not intersect all the contours for an envelope with polytropic index 3. We find that this analysis also applies to similar limits in the literature including the inner mass limit for polytropic models of quasi-stars. Consequently, any core solution that does not intersect all the fractional mass contours exhibits an associated limit and we identify several relevant cases where this is so. We show that a composite polytrope is at a fractional core mass limit when its core solution touches but does not cross the contour of the corresponding fractional core mass. We apply this test to realistic models of helium stars and find that stars typically expand when their cores are near a mass limit. Furthermore, it appears that stars that evolve into giants have always first exceeded an SC-like limit.

Solar irradiance models that assume solar irradiance variations to be due to changes in the solar surface magnetic flux have been successfully used to reconstruct total solar irradiance on rotational as well as cyclical and secular time scales. Modelling spectral solar irradiance is not yet as advanced, and also suffers from a lack of comparison data, in particular on solar-cycle time scales. Here we compare solar irradiance in the 220 nm to 240 nm band as modelled with SATIRE-S and measured by different instruments on the UARS and SORCE satellites. We find good agreement between the model and measurements on rotational time scales. The long-term trends, however, show significant differences. Both SORCE instruments, in particular, show a much steeper gradient over the decaying part of cycle 23 than the modelled irradiance or that measured by UARS/SUSIM.

Aims: We investigate how well modeled solar irradiances agree with measurements from the SORCE satellite, both for total solar irradiance and broken down into spectral regions on timescales of several years. Methods: We use the SATIRE model and compare modeled total solar irradiance (TSI) with TSI measurements between 2003 and 2009. Spectral solar irradiance over 200-1630nm is compared with the SIM instrument on SORCE between 2004 and 2009 during a period of decline from moderate activity to the recent solar minimum in 10 nm bands and for three spectral regions of significant interest: the UV integrated over 200-300nm, the visible over 400-691nm and the IR between 972-1630 nm. Results: The model captures 97% of observed TSI variation. In the spectral comparison, rotational variability is well reproduced, especially between 400 and 1200 nm. The magnitude of change in the long-term trends is many times larger in SIM at almost all wavelengths while trends in SIM oppose SATIRE in the visible between 500 and 700nm and between 1000 and 1200nm. We discuss the remaining issues with both SIM data and the identified limits of the model, particularly with the way facular contributions are dealt with, the limit of flux identification in MDI magnetograms during solar minimum and the model atmospheres in the IR employed by SATIRE. It is unlikely that improvements in these areas will significantly enhance the agreement in the long-term trends. This disagreement implies that some mechanism other than surface magnetism is causing SSI variations, in particular between 2004 and 2006, if the SIM data are correct. Since SATIRE was able to reproduce UV irradiance between 1991 and 2002 from UARS, either the solar mechanism for SSI variation fundamentally changed around the peak of cycle 23, or there is an inconsistency between UARS and SORCE UV measurements. We favour the second explanation.

We present a convariant formulation for radiative transfer in curved space time and demonstrate some applications in the black-hole systems. We calculate the emission from semi-transparent accretion tori around black holes, for opacity provided by the Fe K lines and for opacity dominated by electron scattering. We also calculate the emission from radiative inefficient accretion flow in black holes with opacity provided by electron-positron annihilation lines. Finally we show shadows cast by accreting black holes with different spins and with different distribution of warm material around them.