We introduce a new framework for studying clustering and for calculating alpha partial widths using ab initio wave functions. We demonstrate the formalism for $^{20}$Ne, by calculating the overlap between the $^{16}$O$+\alpha$ cluster configuration and states in $^{20}$Ne computed in the ab initio symmetry-adapted no-core shell model. We present spectroscopic amplitudes and spectroscopic factors, and compare those to no-core symplectic shell-model results in larger model spaces, to gain insight into the underlying physics that drives alpha-clustering. Specifically, we report on the alpha partial width of the lowest $1^-$ resonance in $^{20}$Ne, which is found to be in good agreement with experiment. We also present first no-core shell-model estimates for asymptotic normalization coefficients for the ground state, as well as for the first excited $4^{+}$ state in $^{20}$Ne that lies in a close proximity to the $^{16}$O$+\alpha$ threshold. This outcome highlights the importance of correlations for developing cluster structures and for describing alpha widths. The widths can then be used to calculate alpha-capture reaction rates for narrow resonances of interest to astrophysics. We explore the reaction rate for the alpha-capture reaction $^{16}$O$(\alpha,\gamma)^{20}$Ne at astrophysically relevant temperatures and determine its impact on simulated X-ray burst abundances.

The Micro-X sounding rocket flew for the first time on July 22, 2018, becoming the first program to fly Transition-Edge Sensors and multiplexing SQUID readout electronics in space. While a rocket pointing failure led to no time on-target, the success of the flight systems was demonstrated. The successful flight operation of the instrument puts the program in a position to modify the payload for indirect galactic dark matter searches. The payload modifications are motivated by the science requirements of this observation. Micro-X can achieve world-leading sensitivity in the keV regime with a single flight. Dark matter sensitivity projections have been updated to include recent observations and the expected sensitivity of Micro-X to these observed fluxes. If a signal is seen (as seen in the X-ray satellites), Micro-X can differentiate an atomic line from a dark matter signature.

Micro-X is a sounding rocket-borne instrument that uses a microcalorimeter array to perform high-resolution X-ray spectroscopy. This instrument flew for the first time on July 22nd, 2018 from the White Sands Missile Range, USA. This flight marks the first successful operation of a Transition-Edge Sensor array and its time division multiplexing read-out system in space. This launch was dedicated to the observation of the supernova remnant Cassiopeia A. A failure in the attitude control system prevented the rocket from pointing and led to no time on target. The on-board calibration source provided X-rays in flight, and it is used to compare detector performance during pre-flight integration, flight, and after the successful post-flight recovery. This calibration data demonstrates the capabilities of the detector in a space environment as well as its potential for future flights.

We present the first observations of hydrogen line emission detected around the B-type star HD 46487, a well-studied star in the CoRoT field of view. The emission is only evident in the H$\alpha$ line, for which the observed violet-red peak separation ($\Delta v_{p}$) is typical of a B$e$ star with a circumstellar disk. The absence of dust emission from the infrared spectral energy distribution excludes the possibility of a very young star. The star's magnitude (V=5.079) and regular use in the literature for a variety of studies suggests that the line emission had a high probability of being found previously, had it been evident; since such was not the case, we believe that the B$e$ phenomenon for HD 46487 has only very recently "turned on." We therefore recommend that this star be spectroscopically and photometrically monitored to track continued changes to its circumstellar morphology.

Neptune has brightened by more than 10% during the past several decades. We report on the analysis of published Johnson-Cousins B and V magnitudes dating back to 1954 along with new U, B, V, R, Rc, I and Ic photometry that we recorded during the past 24 years. Characteristic magnitudes, colors and albedos in all seven band-passes are derived from the ensemble of data. Additionally, 25 spectra spanning 26 hours of observation on 5 nights are analyzed. The spectrophotometry demonstrates that planetary flux and albedo is inversely related to the equivalent widths of methane bands. We attribute the changes in band strength, flux and albedo to the high altitude clouds which rotate across the planet's visible disk. Bright clouds increase albedo and flux while reducing methane absorption. Synthetic V magnitudes derived from the spectroscopy also agree closely with the photometric quantities, which cross-validates the two techniques. The spectroscopic and photometric results are discussed within the framework of the secular brightness variations of Neptune.

Uranus is fainter when the Sun and Earth are near its equatorial plane than when they are near the projection of its poles. The average of the absolute values of the sub-Earth and sub-Sun latitudes (referred to as the sub-latitude here) is used to quantify this dependency. The rates of change of magnitude with sub-latitude for four of the Johnson-Cousins band-passes are B-band, -0.48 +/- 0.11 milli-magnitudes per degree; V-band, -0.84 +/- 0.04 ; R-band, -5.33 +/- 0.30; and I-band -2.79 +/- 0.41. Evaluated over the range of observed sub-latitudes, the blue flux changes by a modest 3% while the red flux varies by a much more substantial 30%. These disk-integrated variations are consistent with the published brightness characteristics of the North and South Polar Regions, with the latitudinal distribution of methane and with a planetary hemispheric asymmetry. Reference magnitudes and colors are also reported along with geometric albedos for the seven Johnson-Cousins band-passes.

We have assembled a tiled array (220 cm2) of fine pixel (0.6 mm) imaging CZT detectors for a balloon borne wide-field hard X-ray telescope, ProtoEXIST2. ProtoEXIST2 is a prototype experiment for a next generation hard X-ray imager MIRAX-HXI on board Lattes, a spacecraft from the Agencia Espacial Brasilieira. MIRAX will survey the 5 to 200 keV sky of Galactic bulge, adjoining southern Galactic plane and the extragalactic sky with 6' angular resolution. This survey will open a vast discovery space in timing studies of accretion neutron stars and black holes. The ProtoEXIST2 CZT detector plane consists of 64 of 5 mm thick 2 cm x 2 cm CZT crystals tiled with a minimal gap. MIRAX will consist of 4 such detector planes, each of which will be imaged with its own coded-aperture mask. We present the packaging architecture and assembly procedure of the ProtoEXIST2 detector. On 2012, Oct 10, we conducted a successful high altitude balloon experiment of the ProtoEXIST1 and 2 telescopes, which demonstrates their technology readiness for space application. During the flight both telescopes performed as well as on the ground. We report the results of ground calibration and the initial results for the detector performance in the balloon flight.

We successfully carried out the first high-altitude balloon flight of a wide-field hard X-ray coded-aperture telescope ProtoEXIST1, which was launched from the Columbia Scientific Balloon Facility at Ft. Sumner, New Mexico on October 9, 2009. ProtoEXIST1 is the first implementation of an advanced CdZnTe (CZT) imaging detector in our ongoing program to establish the technology required for next generation wide-field hard X-ray telescopes. The CZT detector plane in ProtoEXIST1 consists of an 8 x 8 array of closely tiled 2 cm x 2 cm x 0.5 cm thick pixellated CZT crystals, each with 8 x 8 pixels, covering a 256 cm^2 active area with 2.5 mm pixels. A tungsten mask, mounted at 90 cm above the detector provides shadowgrams of X-ray sources in the 30 - 600 keV band for imaging, allowing a fully coded field of view of 9 Deg x 9 Deg with an angular resolution of 20 arcmin. To reduce the background radiation, the detector is surrounded by semi-graded (Pb/Sn/Cu) passive shields on the four sides all the way to the mask. On the back side, a 26 cm x 26 cm x 2 cm CsI(Na) active shield provides signals to tag charged particle induced events as well as >~ 100 keV background photons from below. The flight duration was only about 7.5 hours due to strong winds (60 knots) at float altitude (38-39 km). Throughout the flight, the CZT detector performed excellently. The telescope observed Cyg X-1 for ~ 1 hour at the end of the flight. Despite a few problems with the pointing and aspect systems that caused the telescope to track about 6.4 deg off the target, the analysis of the Cyg X-1 data revealed an X-ray source at 7.2 sigma in the 30-100 keV energy band at the expected location from the optical images taken by the onboard daytime star camera. The success of this first flight is very encouraging for the future development of the advanced CZT imaging detectors (ProtoEXIST2, with 0.6 mm pixels).

{\it ProtoEXIST1} is a pathfinder for the {\it EXIST-HET}, a coded aperture hard X-ray telescope with a 4.5 m$^2$ CZT detector plane a 90$\times$70 degree field of view to be flown as the primary instrument on the {\it EXIST} mission and is intended to monitor the full sky every 3 h in an effort to locate GRBs and other high energy transients. {\it ProtoEXIST1} consists of a 256 cm$^2$ tiled CZT detector plane containing 4096 pixels composed of an 8$\times$8 array of individual 1.95 cm $\times$ 1.95 cm $\times$ 0.5 cm CZT detector modules each with a 8 $\times$ 8 pixilated anode configured as a coded aperture telescope with a fully coded $10^\circ\times10^\circ$ field of view employing passive side shielding and an active CsI anti-coincidence rear shield, recently completed its maiden flight out of Ft. Sumner, NM on the 9th of October 2009. During the duration of its 6 hour flight on-board calibration of the detector plane was carried out utilizing a single tagged 198.8 nCi Am-241 source along with the simultaneous measurement of the background spectrum and an observation of Cygnus X-1. Here we recount the events of the flight and report on the detector performance in a near space environment. We also briefly discuss {\it ProtoEXIST2}: the next stage of detector development which employs the {\it NuSTAR} ASIC enabling finer (32$\times$32) anode pixilation. When completed {\it ProtoEXIST2} will consist of a 256 cm$^2$ tiled array and be flown simultaneously with the ProtoEXIST1 telescope.

We have constructed a moderately large area (32 cm2), fine pixel (2.5 mm pixel, 5 mm thick) CZT imaging detector which constitutes the first section of a detector module (256 cm2) developed for a balloon-borne wide-field hard X-ray telescope, ProtoEXIST1. ProtoEXIST1 is a prototype for the High Energy Telescope (HET) in the Energetic X-ray imaging Survey Telescope (EXIST), a next generation space-borne multi-wavelength telescope. We have constructed a large (nearly gapless) detector plane through a modularization scheme by tiling of a large number of 2 cm x 2 cm CZT crystals. Our innovative packaging method is ideal for many applications such as coded-aperture imaging, where a large, continuous detector plane is desirable for the optimal performance. Currently we have been able to achieve an energy resolution of 3.2 keV (FWHM) at 59.6 keV on average, which is exceptional considering the moderate pixel size and the number of detectors in simultaneous operation. We expect to complete two modules (512 cm2) within the next few months as more CZT becomes available. We plan to test the performance of these detectors in a near space environment in a series of high altitude balloon flights, the first of which is scheduled for Fall 2009. These detector modules are the first in a series of progressively more sophisticated detector units and packaging schemes planned for ProtoEXIST2 & 3, which will demonstrate the technology required for the advanced CZT imaging detectors (0.6 mm pixel, 4.5 m2 area) required in EXIST/HET.

The NASA/IPAC/NExScI Star and Exoplanet Database (NStED) is a general purpose stellar archive which supports NASA planet-finding and planet-characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high precision photometric surveys for transiting exoplanets (NStED-ETSS). We present summaries of these components. The NStED stellar database currently serves published parameters for 140,000 stars. These parameters include coordinates, multiplicity, proper motion, parallax, spectral type, multiband photometry, radial velocity, metallicity, chromospheric and coronal activity index, rotation velocity/period, infrared excess. NStED-ETSS currently serves data from the TrES survey of the Kepler field as well as dedicated photometric surveys of four stellar clusters. NStED-ETSS aims to serve both the surveys and the broader astronomical community by archiving these data and making them available in a homogeneous format.

The NASA Star and Exoplanet Database (NStED) is a general purpose stellar archive with the aim of providing support for NASA's planet finding and characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of (currently) 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high precision photometric surveys for transiting exoplanets. We present a summary of the NStED stellar database, functionality, tools, and user interface. NStED currently serves the following kinds of data for 140,000 stars (where available): coordinates, multiplicity, proper motion, parallax, spectral type, multiband photometry, radial velocity, metallicity, chromospheric and coronal activity index, and rotation velocity/period. Furthermore, the following derived quantities are given wherever possible: distance, effective temperature, mass, radius, luminosity, space motions, and physical/angular dimensions of habitable zone. Queries to NStED can be made using constraints on any combination of the above parameters. In addition, NStED provides tools to derive specific inferred quantities for the stars in the database, cross-referenced with available extra-solar planetary data for those host stars. NStED can be accessed at http://nsted.ipac.caltech.edu

The NASA Star and Exoplanet Database (NStED) is a general purpose stellar archive with the aim of providing support for NASA's planet finding and characterization goals, stellar astrophysics, and the planning of NASA and other space missions. There are two principal components of NStED: a database of (currently) 140,000 nearby stars and exoplanet-hosting stars, and an archive dedicated to high-precision photometric surveys for transiting exoplanets. We present a summary of the latter component: the NStED Exoplanet Transit Survey Service (NStED-ETSS), along with its content, functionality, tools, and user interface. NStED-ETSS currently serves data from the TrES Survey of the Kepler Field as well as dedicated photometric surveys of four stellar clusters. <CA>NStED-ETSS aims to serve both the surveys and the broader astronomical community by archiving these data and making them available in a homogeneous format. Examples of usability of ETSS include investigation of any time-variable phenomena in data sets not studied by the original survey team, application of different techniques or algorithms for planet transit detections, combination of data from different surveys for given objects, statistical studies, etc. NStED-ETSS can be accessed at \tt{http://nsted.ipac.caltech.edu}

We report our progress on the development of pixellated imaging CZT detector arrays for our first-generation balloon-borne wide-field hard X-ray (20 - 600 keV) telescope, ProtoEXIST1. Our ProtoEXIST program is a pathfinder for the High Energy Telescope (HET) on the Energetic X-ray Imaging Survey telescope (EXIST), a proposed implementation of the Black Hole Finder Probe. ProtoEXIST1 consists of four independent coded-aperture telescopes with close-tiled (~0.4 mm gaps) CZT detectors that preserve their 2.5mm pixel pitch. Multiple shielding/field-of-view configurations are planned to identify optimal geometry for the HET in EXIST. The primary technical challenge in ProtoEXIST is the development of large area, close-tiled modules of imaging CZT detectors (1000 cm2 for ProtoEXIST1), with all readout and control systems for the ASIC readout vertically stacked. We describe the overall telescope configuration of ProtoEXIST1 and review the current development status of the CZT detectors, from individual detector crystal units (DCUs) to a full detector module (DM). We have built the first units of each component for the detector plane and have completed a few Rev2 DCUs (2x2 cm2), which are under a series of tests. Bare DCUs (pre-crystal bonding) show high, uniform ASIC yield (~70%) and ~30% reduction in electronics noise compared to the Rev1 equivalent. A Rev1 DCU already achieved ~1.2% FWHM at 662 keV, and preliminary analysis of the initial radiation tests on a Rev2 DCU shows ~ 4 keV FWHM at 60 keV (vs. 4.7 keV for Rev1). We therefore expect about <~1% FWHM at 662 keV with the Rev2 detectors.

We describe the detector development for a balloon-borne wide-field hard X-ray (20 - 600 keV) telescope, ProtoEXIST. ProtoEXIST is a pathfinder for both technology and science of the proposed implementation of the Black Hole Finder Probe, Energetic X-ray Imaging Survey telescope (EXIST). The principal technology challenge is the development of large area, close-tiled modules of imaging CZT detectors (1000 cm2 for ProtoEXIST1). We review the updates of the detector design and package concept for ProtoEXIST1 and report the current development status of the CZT detectors, using calibration results of our basic detector unit - 2 x 2 x 0.5 cm CZT crystals with 2.5 mm pixels (8 x 8 array). The current prototype (Rev1) of our detector crystal unit (DCU) shows ~4.5 keV electronics noise (FWHM), and the radiation measurements show the energy resolution (FWHM) of the units is 4.7 keV (7.9%) at 59.5 keV, 5.6 keV (4.6%) at 122 keV, and 7.6 keV (2.1%) at 356 keV. The new (Rev2) DCU with revised design is expected to improve the resolution by ~30%.

We present the COBE DIRBE Point Source Catalog, an all-sky catalog containing infrared photometry in 10 bands from 1.25 microns to 240 microns for 11,788 of the brightest near and mid-infrared point sources in the sky. Since DIRBE had excellent temporal coverage (100 - 1900 independent measurements per object during the 10 month cryogenic mission), the Catalog also contains information about variability at each wavelength, including amplitudes of variation observed during the mission. Since the DIRBE spatial resolution is relatively poor (0.7 degrees), we have carefully investigated the question of confusion, and have flagged sources with infrared-bright companions within the DIRBE beam. In addition, we filtered the DIRBE light curves for data points affected by companions outside of the main DIRBE beam but within the `sky' portion of the scan. At high Galactic latitudes (|b| > 5 degrees), the Catalog contains essentially all of the unconfused sources with flux densities greater than 90, 60, 60, 50, 90, and 165 Jy at 1.25, 2.2, 3.5, 4.9, 12, and 25 microns, respectively, corresponding to magnitude limits of approximately 3.1, 2.6, 1.7, 1.3, -1.3, and -3.5. At longer wavelengths and in the Galactic Plane, the completeness is less certain because of the large DIRBE beam and possible contributions from extended emission. The Catalog also contains the names of the sources in other catalogs, their spectral types, variability types, and whether or not the sources are known OH/IR stars. We discuss a few remarkable objects in the Catalog. [abridged]