In order to utilize solar imagery for real-time feature identification and large-scale data science investigations of solar structures, we need maps of the Sun where phenomena, or themes, are labeled. Since solar imagers produce observations every few minutes, it is not feasible to label all images by hand. Here, we compare three machine learning algorithms performing solar image classification using extreme ultraviolet and Hydrogen-alpha images: a maximum likelihood model assuming a single normal probability distribution for each theme from Rigler et al. (2012), a maximum-likelihood model with an underlying Gaussian mixtures distribution, and a random forest model. We create a small database of expert-labeled maps to train and test these algorithms. Due to the ambiguity between the labels created by different experts, a collaborative labeling is used to include all inputs. We find the random forest algorithm performs the best amongst the three algorithms. The advantages of this algorithm are best highlighted in: comparison of outputs to hand-drawn maps; response to short-term variability; and tracking long-term changes on the Sun. Our work indicates that the next generation of solar image classification algorithms would benefit significantly from using spatial structure recognition, compared to only using spectral, pixel-by-pixel brightness distributions.

The Sun is an active star that can have a direct impact on the Earth, its magnetosphere, and the technological infrastructure on which modern society depends. Among the phenomena that drive "space weather" are fast solar wind streams and co-rotating interaction regions, solar flares, coronal mass ejections, the shocks they produce, and the energetic particles they accelerate. Radio emission from these and associated phenomena offer unique diagnostic possibilities that complement those available at other wavelengths. Here, the relevant space weather drivers are briefly described, the potential role of radio observations is outlined, and the requirements of an instrument to provide them are provided: specifically, ultrabroadband imaging spectropolarimetry. The insights provided by radio observations of space weather drivers will not only inform the science of space weather, they will pave the way for new tools for forecasting and "nowcasting" space weather. They will also serve as an important touchstone against which local environment of exoplanets and the impact of "exo-space weather" can be evaluated.

Ground-based solar observations provide key contextual data (i.e., the 'big picture') to produce a complete description of the only astrosphere we can study in situ: our Sun's heliosphere. The next decade will see the beginning of operations of the Daniel K. Inouye Solar Telescope (DKIST). DKIST will join NASA's Parker Solar Probe and the NASA/ESA Solar Orbital mission, which together will study our Sun's atmosphere with unprecedented detail. This white paper outlines the current paradigm for ground-based solar synoptic observations, and indicates those areas that will benefit from focused attention.

The Gamma-Ray Imager/Polarimeter for Solar flares (GRIPS) is a balloon-borne telescope designed to study solar-flare particle acceleration and transport. We describe GRIPS's first Antarctic long-duration flight in Jan 2016 and report preliminary calibration and science results. Electron and ion dynamics, particle abundances and the ambient plasma conditions in solar flares can be understood by examining hard X-ray (HXR) and gamma-ray emission (20 keV to 10 MeV) with enhanced imaging, spectroscopy and polarimetry. GRIPS is specifically designed to answer questions including: What causes the spatial separation between energetic electrons producing HXRs and energetic ions producing gamma-ray lines? How anisotropic are the relativistic electrons, and why can they dominate in the corona? How do the compositions of accelerated and ambient material vary with space and time, and why? GRIPS's key technological improvements over the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) include 3D position-sensitive germanium detectors (3D-GeDs) and a single-grid, multi-pitch rotating modulator (MPRM) collimator. The 3D-GeDs have spectral FWHM resolution of a few hundred keV and spatial resolution $<$1 mm$^3$. For photons that Compton scatter, usually $\gtrsim$150 keV, the energy deposition sites can be tracked, providing polarization measurements as well as enhanced background reduction. The MPRM single-grid design provides twice the throughput of a bi-grid imaging system like RHESSI. The grid is composed of 2.5 cm thick W/Cu slats with 1-13 mm variable slit pitch, achieving quasi-continuous FWHM angular coverage over 12.5-162 arcsecs. This resolution is capable of imaging the separate magnetic loop footpoint emissions in a variety of flare sizes. (Abstract edited down from source.)

On 13 March 2010 an unusually long duration event was observed by radio spectrographs onboard the STEREO-B and Wind spacecraft. The event started at about 13:00 UT and ended at approximately 06:00 UT on 14 March. The event presents itself as slow drifting, quasi-continuous emission in a very narrow frequency interval, with an apparent frequency drift from about 625 kHz to approximately 425 kHz. Using the Leblanc, Dulk, and Bougeret (1998) interplanetary density model we determined that the drift velocities of the radio source are $\approx$33km s$^{-1}$ and $\approx$52km s$^{-1}$ for 0.2 and 0.5 times the densities of Leblanc model, respectively with a normalization density of 7.2cm$^{-3}$ at 1AU and assuming harmonic emission. A joint analysis of the radio direction finding data, coronograph white-light observations and modeling revealed that the radio sources appear to be localized in regions of interaction with relatively high density and slow solar wind speed.

The initiation phase of CMEs is a very important aspect of solar physics, as these phenomena ultimately drive space weather in the heliosphere. This phase is known to occur between the photosphere and low corona, where many models introduce an instability and/or magnetic reconnection that triggers a CME, often with associated flaring activity. To this end, it is important to obtain a variety of observations of the low corona in order to build as clear a picture as possible of the dynamics that occur therein. Here, we combine the EUV imagery of the SWAP instrument on board PROBA2 with the white-light imagery of the ground-based Mk4 coronameter at MLSO in order to bridge the observational gap that exists between the disk imagery of AIA on board SDO and the coronal imagery of LASCO on board SOHO. Methods of multiscale image analysis were applied to the observations to better reveal the coronal signal while suppressing noise and other features. This allowed an investigation into the initiation phase of a CME that was driven by a rising flux rope structure from a "two-stage" flaring active region underlying an extended helmet streamer. It was found that the initial outward motion of the erupting loop system in the EUV observations coincided with the first X-ray flare peak, and led to a plasma pile-up of the white-light CME core material. The characterized CME core then underwent a strong jerk in its motion, as the early acceleration increased abruptly, simultaneous with the second X-ray flare peak. The overall system expanded into the helmet streamer to become the larger CME structure observed in the LASCO coronagraph images, which later became concave-outward in shape. Theoretical models for the event are discussed in light of these unique observations, and it is concluded that the formation of either a kink-unstable or torus-unstable flux rope may be the likeliest scenario.

White-light observations by the Solar Dynamics Observatory's Helioseismic and Magnetic Imager of a loop-prominence system occurring in the aftermath of an X-class flare on 2013 May 13 near the eastern solar limb show a linearly polarized component, reaching up to $\sim$20% at an altitude of $\sim$33 Mm, about the maximal amount expected if the emission were due solely to Thomson scattering of photospheric light by the coronal material. The mass associated with the polarized component was 8.2$\times$10$^{14}$ g. At 15 Mm altitude, the brightest part of the loop was 3(+/-0.5)% linearly polarized, only about 20% of that expected from pure Thomson scattering, indicating the presence of an additional unpolarized component at wavelengths near Fe I (617.33 nm), probably thermal emission. We estimated the free electron density of the white-light loop system to possibly be as high as 1.8$\times$10$^{12}$ cm$^{-3}$.

We report observations of white-light ejecta in the low corona, for two X-class flares on the 2013 May 13, using data from the Helioseismic and Magnetic Imager (HMI) of the Solar Dynamics Observatory. At least two distinct kinds of sources appeared (chromospheric and coronal), in the early and later phases of flare development, in addition to the white-light footpoint sources commonly observed in the lower atmosphere. The gradual emissions have a clear identification with the classical loop-prominence system, but are brighter than expected and possibly seen here in the continuum rather than line emission. We find the HMI flux exceeds the radio/X-ray interpolation of the bremsstrahlung produced in the flare soft X-ray sources by at least one order of magnitude. This implies the participation of cooler sources that can produce free-bound continua and possibly line emission detectable by HMI. One of the early sources dynamically resembles "coronal rain", appearing at a maximum apparent height and moving toward the photosphere at an apparent constant projected speed of 134 $\pm$ 8 $\mathrm{km s^{-1}}$. Not much literature exists on the detection of optical continuum sources above the limb of the Sun by non-coronagraphic instruments, and these observations have potential implications for our basic understanding of flare development, since visible observations can in principle provide high spatial and temporal resolution.

We have investigated a supra-arcade structure, associated with an M1.6 flare, which occurred on the south-east limb on 4th of November 2010. It is observed in microwaves at 17 GHz with the Nobeyama Radioheliograph (NoRH), soft X-rays in the range of 8-20 keV with the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), and EUV with the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO). As reported by Reeves & Golub (2011), the supra-arcade structure is observed predominantly in the AIA 131 {\AA} channel, which contains a hot 11 MK component from Fe XIX (Boerner et al. 2011). While this hot flare plasma lasts over the decay phase of the flare, it shows some interesting characteristics in microwaves and soft X-rays: 1) In the supra-arcade structure, the brightness temperature (TB) of the microwave emission increases gradually up to 2\times10^4 K, and 2) two soft X-ray sources appear: one cospatial with the supra-arcade structure and another above the post-flare arcade. We have derived the variation of emission measure, density, and energy of the supra-arcade structure using the TB obtained from 17 GHz microwave observations.

We present observational results of a type II burst associated with a CME-CME interaction observed in the radio and white-light wavelength range. We applied radio direction-finding techniques to observations from the STEREO and Wind spacecraft, the results of which were interpreted using white-light coronagraphic measurements for context. The results of the multiple radio-direction finding techniques applied were found to be consistent both with each other and with those derived from the white-light observations of coronal mass ejections (CMEs). The results suggest that the Type II burst radio emission is causally related to the CMEs interaction.