Multi-component modelling of galaxies is a valuable tool in the effort to quantitatively understand galaxy evolution, yet the use of the technique is plagued by issues of convergence, model selection and parameter degeneracies. These issues limit its application over large samples to the simplest models, with complex models being applied only to very small samples. We attempt to resolve this dilemma of "quantity or quality" by developing a novel framework, built inside the Zooniverse citizen science platform, to enable the crowdsourcing of model creation for Sloan Digitial Sky Survey galaxies. We have applied the method, including a final algorithmic optimisation step, on a test sample of 198 galaxies, and examine the robustness of this new method. We also compare it to automated fitting pipelines, demonstrating that it is possible to consistently recover accurate models that either show good agreement with, or improve on, prior work. We conclude that citizen science is a promising technique for modelling images of complex galaxies, and release our catalogue of models.

Strong lenses are extremely useful probes of the distribution of matter on galaxy and cluster scales at cosmological distances, but are rare and difficult to find. The number of currently known lenses is on the order of 1,000. We wish to use crowdsourcing to carry out a lens search targeting massive galaxies selected from over 442 square degrees of photometric data from the Hyper Suprime-Cam (HSC) survey. We selected a sample of $\sim300,000$ galaxies with photometric redshifts in the range $0.2 < z_{phot} < 1.2$ and photometrically inferred stellar masses $\log{M_*} > 11.2$. We crowdsourced lens finding on this sample of galaxies on the Zooniverse platform, as part of the Space Warps project. The sample was complemented by a large set of simulated lenses and visually selected non-lenses, for training purposes. Nearly 6,000 citizen volunteers participated in the experiment. In parallel, we used YattaLens, an automated lens finding algorithm, to look for lenses in the same sample of galaxies. Based on a statistical analysis of classification data from the volunteers, we selected a sample of the most promising $\sim1,500$ candidates which we then visually inspected: half of them turned out to be possible (grade C) lenses or better. Including lenses found by YattaLens or serendipitously noticed in the discussion section of the Space Warps website, we were able to find 14 definite lenses, 129 probable lenses and 581 possible lenses. YattaLens found half the number of lenses discovered via crowdsourcing. Crowdsourcing is able to produce samples of lens candidates with high completeness and purity, compared to currently available automated algorithms. A hybrid approach, in which the visual inspection of samples of lens candidates pre-selected by discovery algorithms and/or coupled to machine learning is crowdsourced, will be a viable option for lens finding in the 2020s.

We provide 28 new planet candidates that have been vetted by citizen scientists and expert astronomers. This catalog contains 9 likely rocky candidates ($R_{pl} < 2.0R_\oplus$) and 19 gaseous candidates ($R_{pl} > 2.0R_\oplus$). Within this list we find one multi-planet system (EPIC 246042088). These two sub-Neptune ($2.99 \pm 0.02R_\oplus$ and $3.44 \pm 0.02R_\oplus$) planets exist in a near 3:2 orbital resonance. The discovery of this multi-planet system is important in its addition to the list of known multi-planet systems within the K2 catalog, and more broadly in understanding the multiplicity distribution of the exoplanet population (Zink et al. 2019). The candidates on this list are anticipated to generate RV amplitudes of 0.2-18 m/s, many within the range accessible to current facilities.

Observations from the Kepler and K2 missions have provided the astronomical community with unprecedented amounts of data to search for transiting exoplanets and other astrophysical phenomena. Here, we present K2-288, a low-mass binary system (M2.0 +/- 1.0; M3.0 +/- 1.0) hosting a small (Rp = 1.9 REarth), temperate (Teq = 226 K) planet observed in K2 Campaign 4. The candidate was first identified by citizen scientists using Exoplanet Explorers hosted on the Zooniverse platform. Follow-up observations and detailed analyses validate the planet and indicate that it likely orbits the secondary star on a 31.39-day period. This orbit places K2-288Bb in or near the habitable zone of its low-mass host star. K2-288Bb resides in a system with a unique architecture, as it orbits at >0.1 au from one component in a moderate separation binary (aproj approximately 55 au), and further follow-up may provide insight into its formation and evolution. Additionally, its estimated size straddles the observed gap in the planet radius distribution. Planets of this size occur less frequently and may be in a transient phase of radius evolution. K2-288 is the third transiting planet system identified by the Exoplanet Explorers program and its discovery exemplifies the value of citizen science in the era of Kepler, K2, and the Transiting Exoplanet Survey Satellite.

We report modelling follow-up of recently-discovered gravitational-lens candidates in the Canada France Hawaii Telescope Legacy Survey. Lens modelling was done by a small group of specially-interested volunteers from the SpaceWarps citizen-science community who originally found the candidate lenses. Models are categorised according to seven diagnostics indicating (a) the image morphology and how clear or indistinct it is, (b) whether the mass map and synthetic lensed image appear to be plausible, and (c) how the lens-model mass compares with the stellar mass and the abundance-matched halo mass. The lensing masses range from ~10^11 Msun to >10^13 Msun. Preliminary estimates of the stellar masses show a smaller spread in stellar mass (except for two lenses): a factor of a few below or above ~10^11 Msun. Therefore, we expect the stellar-to-total mass fraction to decline sharply as lensing mass increases. The most massive system with a convincing model is J1434+522 (SW05). The two low-mass outliers are J0206-095 (SW19) and J2217+015 (SW42); if these two are indeed lenses, they probe an interesting regime of very low star-formation efficiency. Some improvements to the modelling software (SpaghettiLens), and discussion of strategies regarding scaling to future surveys with more and frequent discoveries, are included.

We report the discovery of a gravitationally lensed hyperluminous infrared galaxy (L_IR~10^13 L_sun) with strong radio emission (L_1.4GHz~10^25 W/Hz) at z=2.553. The source was identified in the citizen science project SpaceWarps through the visual inspection of tens of thousands of iJKs colour composite images of Luminous Red Galaxies (LRGs), groups and clusters of galaxies and quasars. Appearing as a partial Einstein ring (r_e~3") around an LRG at z=0.2, the galaxy is extremely bright in the sub-millimetre for a cosmological source, with the thermal dust emission approaching 1 Jy at peak. The redshift of the lensed galaxy is determined through the detection of the CO(3-2) molecular emission line with the Large Millimetre Telescope's Redshift Search Receiver and through [OIII] and H-alpha line detections in the near-infrared from Subaru/IRCS. We have resolved the radio emission with high resolution (300-400 mas) eMERLIN L-band and JVLA C-band imaging. These observations are used in combination with the near-infrared imaging to construct a lens model, which indicates a lensing magnification of ~10x. The source reconstruction appears to support a radio morphology comprised of a compact (<250 pc) core and more extended component, perhaps indicative of an active nucleus and jet or lobe.

We describe Space Warps, a novel gravitational lens discovery service that yields samples of high purity and completeness through crowd-sourced visual inspection. Carefully produced colour composite images are displayed to volunteers via a web- based classification interface, which records their estimates of the positions of candidate lensed features. Images of simulated lenses, as well as real images which lack lenses, are inserted into the image stream at random intervals; this training set is used to give the volunteers instantaneous feedback on their performance, as well as to calibrate a model of the system that provides dynamical updates to the probability that a classified image contains a lens. Low probability systems are retired from the site periodically, concentrating the sample towards a set of lens candidates. Having divided 160 square degrees of Canada-France-Hawaii Telescope Legacy Survey (CFHTLS) imaging into some 430,000 overlapping 82 by 82 arcsecond tiles and displaying them on the site, we were joined by around 37,000 volunteers who contributed 11 million image classifications over the course of 8 months. This Stage 1 search reduced the sample to 3381 images containing candidates; these were then refined in Stage 2 to yield a sample that we expect to be over 90% complete and 30% pure, based on our analysis of the volunteers performance on training images. We comment on the scalability of the SpaceWarps system to the wide field survey era, based on our projection that searches of 10$^5$ images could be performed by a crowd of 10$^5$ volunteers in 6 days.

We report the discovery of 29 promising (and 59 total) new lens candidates from the CFHT Legacy Survey (CFHTLS) based on about 11 million classifications performed by citizen scientists as part of the first Space Warps lens search. The goal of the blind lens search was to identify lens candidates missed by robots (the RingFinder on galaxy scales and ArcFinder on group/cluster scales) which had been previously used to mine the CFHTLS for lenses. We compare some properties of the samples detected by these algorithms to the Space Warps sample and find them to be broadly similar. The image separation distribution calculated from the Space Warps sample shows that previous constraints on the average density profile of lens galaxies are robust. SpaceWarps recovers about 65% of known lenses, while the new candidates show a richer variety compared to those found by the two robots. This detection rate could be increased to 80% by only using classifications performed by expert volunteers (albeit at the cost of a lower purity), indicating that the training and performance calibration of the citizen scientists is very important for the success of Space Warps. In this work we present the SIMCT pipeline, used for generating in situ a sample of realistic simulated lensed images. This training sample, along with the false positives identified during the search, has a legacy value for testing future lens finding algorithms. We make the pipeline and the training set publicly available.

We develop a method to enable collaborative modelling of gravitational lenses and lens candidates, that could be used by non-professional lens enthusiasts. It uses an existing free-form modelling program (glass), but enables the input to this code to be provided in a novel way, via a user-generated diagram that is essentially a sketch of an arrival-time surface. We report on an implementation of this method, SpaghettiLens, which has been tested in a modelling challenge using 29 simulated lenses drawn from a larger set created for the Space Warps citizen science strong lens search. We find that volunteers from this online community asserted the image parities and time ordering consistently in some lenses, but made errors in other lenses depending on the image morphology. While errors in image parity and time ordering lead to large errors in the mass distribution, the enclosed mass was found to be more robust: the model-derived Einstein radii found by the volunteers were consistent with those produced by one of the professional team, suggesting that given the appropriate tools, gravitational lens modelling is a data analysis activity that can be crowd-sourced to good effect. Ideas for improvement are discussed, these include (a) overcoming the tendency of the models to be shallower than the correct answer in test cases, leading to systematic overestimation of the Einstein radius by 10 per cent at present, and (b) detailed modelling of arcs.

The distribution of dust in the ecliptic plane between 0.96 and 1.04 AU has been inferred from impacts on the two STEREO spacecraft through observation of secondary particle trails and unexpected off-points in the Heliospheric Imager (HI) cameras. This study made use of analysis carried out by members of a distributed web-based project, Solar Stormwatch. A comparison between observations of the brightest particle trails and a survey of fainter trails shows consistent distributions. While there is no obvious correlation between this distribution and the occurrence of individual meteor streams at Earth, there are some broad longitudinal features in these distributions that are also observed in sources of the sporadic meteor population. The asymmetry in the number of trails seen by each spacecraft and the fact that there are many more unexpected off-points in the HI-B than in HI-A, indicates that the majority of impacts are coming from the apex direction. For impacts causing off-points in the HI-B camera these dust particles are estimated to have masses in excess of 10-17 kg with radii exceeding 0.1 {\mu}m. For off-points observed in the HI-A images, which can only have been caused by particles travelling from the anti-apex direction, the distribution is consistent with that of secondary 'storm' trails observed by HI-B, providing evidence that these trails also result from impacts with primary particles from an anti-apex source. It is apparent that the differential mass index of particles from the apex direction is consistently above 2. This indicates that the majority of the mass is within the smaller particles of this population. In contrast, the differential mass index of particles from the anti-apex direction (causing off-points in HI-A) is consistently below 2, indicating that the majority of the mass is to be found in larger particles of this distribution.