The collision of Deep Impact with comet 9P/Tempel 1 generated a bright cloud of dust which dissipated during several days after the impact. The brightness variations of this cloud and the changes of its position and shape are governed by the physical properties of the dust grains. We use a Monte Carlo model to describe the evolution of the post-impact dust plume. The results of our dynamical simulations are compared to the data obtained with FORS2, the FOcal Reducer and low dispersion Spectrograph for the VLT of the European Southern Observatory (ESO), to derive the particle size distribution and the total amount of material contained in the dust ejecta cloud.

Comet Hale-Bopp was observed five times with ISOPHOT, the photometer on board the Infrared Space Observatory (ISO). Each time broadband photometry was performed using 4 different detectors, 5 apertures and, 10 filters covering the range between 3.6 to 175 $\mu$m. Calibration measurements using the internal Fine Calibration Source were done together with each individual measurement. Background observations were performed with identical instrument settings at the same positions on the sky several days after the comet observations. The observation strategy and the initial data reduction steps are described in some detail and the resulting in-band power values of the Hale-Bopp observations and their uncertainties are derived. Initial reduction of these measurements was performed in 3 steps: (1) processing of raw data by removing instrumental and energetic particle effects, (2) averaging of the individual signals, and (3) determination of the detector responsivities and their uncertainties. The detector signal is determined by two different methods and the best value is chosen. At the present level of processing uncertainties range from 10% to a factor of 3 for the low power levels at short wavelengths. The in-band power levels at different wavelengths varied over 3 orders of magnitude.