Recent observations show cool, oscillating prominence threads fading when observed in cool spectral lines and appearing in warm spectral lines. A proposed mechanism to explain this evolution is that the threads were heated by turbulence driven by the Kelvin--Helmholtz instability that developed as a result of wave-driven shear flows on the surface of the thread. As the Kelvin--Helmholtz instability is an instability that works to mix the fluids, in the solar corona it can be expected to work by mixing the cool prominence material with that of the hot corona to form a warm boundary layer. In this paper we develop a simple phenomenological model of nonlinear Kelvin--Helmholtz mixing, using it to determine the characteristic density and temperature of the mixing layer, which for the case under study with constant pressure across the two fluids are $\rho_{\rm mixed}=\sqrt{\rho_1\rho_2}$ and $T_{\rm mixed}=\sqrt{T_1T_2}$. One result from the model is that it provides an accurate, as determined by comparison with simulation results, determination of the kinetic energy in the mean velocity field. A consequence of this is that the magnitude of turbulence, and with it the energy that can be dissipated on fast time-scales, as driven by this instability can be determined. For the prominence-corona system, the mean temperature rise possible from turbulent heating is estimated to be less than 1\% of the characteristic temperature (which is found to be $10^5$\,K). These results highlight that mixing, and not heating, are likely to be the cause of the observed transition between cool to warm material in Okamoto et. al (2015). One consequence of this result is that the mixing creates a region with higher radiative loss rates on average than either of the original fluids, meaning that this instability could contribute a net loss of thermal energy from the corona, i.e. coronal cooling.

Some high-resolution observations have revealed that the active-region solar corona is filled with myriads of thin strands even in apparently uniform regions with no resolved loops. This fine structure can host collective oscillations involving a large portion of the corona due to the coupling of the motions of the neighbouring strands. We study these vibrations and the possible observational effects. Here we theoretically investigate the collective oscillations inherent to the fine structure of the corona. We have called them fundamental vibrations because they cannot exist in a uniform medium. We use the T-matrix technique to find the normal modes of random arrangements of parallel strands. We consider an increasing number of tubes to understand the vibrations of a huge number of tubes of a large portion of the corona. We additionally generate synthetic time-distance Doppler and line broadening diagrams of the vibrations of a coronal region to compare with observations. We have found that the fundamental vibrations are in the form of clusters of tubes where not all the tubes participate in the collective mode. The periods are distributed over a wide band of values. The width of the band increases with the number of strands but rapidly reaches an approximately constant value. The frequency band associated with the fine structure of the corona depends on the minimum separation between strands. We have found that the coupling between the strands is of large extent. The synthetic Dopplergrams and line-broadening maps show signatures of collective vibrations, not present in the case of purely random individual kink vibrations. We conclude that the fundamental vibrations of the corona can contribute to the energy budget of the corona and they may have an observational signature.

The purpose of this work is to develop a procedure to obtain the normal modes of a coronal loop from time-dependent numerical simulations with the aim of better understanding observed transverse loop oscillations. To achieve this goal, in this paper we present a new method and test its performance with a problem for which the normal modes can be computed analytically. In a follow-up paper, the application to the simulations of \citet{rial2013} is tackled. The method proceeds iteratively and at each step consists of (i) a time-dependent numerical simulation followed by (ii) the Complex Empirical Orthogonal Function (CEOF) analysis of the simulation results. The CEOF analysis provides an approximation to the normal mode eigenfunctions that can be used to set up the initial conditions for the numerical simulation of the following iteration, in which an improved normal mode approximation is obtained. The iterative process is stopped once the global difference between successive approximate eigenfunctions is below a prescribed threshold. The equilibrium used in this paper contains material discontinuities that result in one eigenfunction with a jump across these discontinuities and two eigenfunctions whose normal derivatives are discontinuous there. After 6 iterations, the approximation to the frequency and eigenfunctions are accurate to $\lesssim 0.7$\% except for the eigenfunction with discontinuities, which displays a much larger error at these positions.

A classic application of coronal seismology uses transverse oscillations of waveguides to obtain estimates of the magnetic field strength. The procedure requires information on the density of the structures. Often, it ignores the damping of the oscillations. We computed marginal posteriors for parameters such as the waveguide density; the density contrast; the transverse inhomogeneity length-scale; and the magnetic field strength, under the assumption that the oscillations can be modelled as standing magnetohydrodynamic (MHD) kink modes damped by resonant absorption. Our results show that the magnetic field strength can be properly inferred, even if the densities inside and outside the structure are largely unknown. Incorporating observational estimates of plasma density further constrains the obtained posteriors. The amount of information one is willing to include (a priori) for the density and the density contrast influences their corresponding posteriors, but very little the inferred magnetic field strength. The decision to include or leave out the information on the damping and the damping time-scales have a minimal impact on the obtained magnetic field strength. In contrast to the classic method which provides with numerical estimates with error bars or possible ranges of variation for the magnetic field strength, Bayesian methods offer the full distribution of plausibility over the considered range of possible values. The methods are applied to available datasets of observed transverse loop oscillations, can be extended to prominence fine structures or chromospheric spicules and implemented to propagating waves in addition to standing oscillations.

The aim of this paper is to point out that the classic seismological problem using observations and theoretical expressions for the periods and damping times of transverse standing magnetohydrodynamic (MHD) waves in coronal loops is better referred to as a reduced seismological problem. Reduced emphasises the fact that only a small number of characteristic quantities of the equilibrium profiles can be determined. Reduced also implies that there is no unique solution to the full seismological problem. Even the reduced seismological problem does not allow a unique solution. Bayesian inference results support our mathematical arguments and offer insight into the relationship between the algebraic and the probabilistic inversions.

High resolution observations have permitted to resolve the solar prominences/filaments as sets of threads/fibrils. However, the values of the physical parameters of these threads and their structuring remain poorly constrained. We use prominence seismology techniques to analyse transverse oscillations in threads through the comparison between magnetohydrodynamic (MHD) models and observations. We apply Bayesian methods to obtain two different types of information. We first infer the marginal posterior distribution of physical parameters, such as the magnetic field strength or the length of the thread, when a totally filled tube, a partially filled tube, and three damping models (resonant absorption in the Alfv\'en continuum, resonant absorption in the slow continuum, and Cowling's diffusion) are considered as certain. Then, we compare the relative plausibility between alternative MHD models by computing the Bayes factors. Well constrained probability density distributions can be obtained for the magnetic field strength, the length of the thread, the density contrast, and parameters associated to damping models. When comparing the damping models of resonant absorption in the Alfv\'en continuum, resonant absorption in the slow continuum and Cowling's diffusion due to partial ionisation of prominence plasma, the resonant absorption in the Alfv\'en continuum is the most plausible mechanism in explaining the existing observations. Relations between periods of fundamental and first overtone kink modes with values around 1 are better explained by expressions of the period ratio in the long thread approximation, while the rest of the values are more probable in the short thread limit for the period ratio. Our results show that Bayesian analysis offers valuable methods for performing parameter inference and model comparison in the context of prominence seismology.

The Kelvin-Helmholtz instability has been proposed as a mechanism to extract energy from magnetohydrodynamic (MHD) kink waves in flux tubes, and to drive dissipation of this wave energy through turbulence. It is therefore a potentially important process in heating the solar corona. However, it is unclear how the instability is influenced by the oscillatory shear flow associated with an MHD wave. We investigate the linear stability of a discontinuous oscillatory shear flow in the presence of a horizontal magnetic field within a Cartesian framework that captures the essential features of MHD oscillations in flux tubes. We derive a Mathieu equation for the Lagrangian displacement of the interface and analyse its properties, identifying two different instabilities: a Kelvin-Helmholtz instability and a parametric instability involving resonance between the oscillatory shear flow and two surface Alfv\'{e}n waves. The latter occurs when the system is Kelvin-Helmholtz stable, thus favouring modes that vary along the flux tube, and as a consequence provides an important and additional mechanism to extract energy. When applied to flows with the characteristic properties of kink waves in the solar corona, both instabilities can grow, with the parametric instability capable of generating smaller scale disturbances along the magnetic field than possible via the Kelvin-Helmholtz instability. The characteristic time-scale for these instabilities is $\sim 100$ s, for wavelengths of $200$ km. The parametric instability is more likely to occur for smaller density contrasts and larger velocity shears, making its development more likely on coronal loops than on prominence threads.

In contrast to the situation in a laboratory, the study of the solar atmosphere has to be pursued without direct access to the physical conditions of interest. Information is therefore incomplete and uncertain and inference methods need to be employed to diagnose the physical conditions and processes. One of such methods, solar atmospheric seismology, makes use of observed and theoretically predicted properties of waves to infer plasma and magnetic field properties. A recent development in solar atmospheric seismology consists in the use of inversion and model comparison methods based on Bayesian analysis. In this paper, the philosophy and methodology of Bayesian analysis are first explained. Then, we provide an account of what has been achieved so far from the application of these techniques to solar atmospheric seismology and a prospect of possible future extensions.

We present a method to assess the plausibility of alternative mechanisms to explain the damping of magnetohydrodynamic (MHD) transverse waves in solar coronal loops. The considered mechanisms are resonant absorption of kink waves in the Alfv\'en continuum, phase-mixing of Alfv\'en waves, and wave leakage. Our methods make use of Bayesian inference and model comparison techniques. We first infer the values for the physical parameters that control the wave damping, under the assumption of a particular mechanism, for typically observed damping time-scales. Then, the computation of marginal likelihoods and Bayes factors enable us to quantify the relative plausibility between the alternative mechanisms. We find that, in general, the evidence is not large enough to support a single particular damping mechanism as the most plausible one. Resonant absorption and wave leakage offer the most probable explanations in strong damping regimes, while phase mixing is the best candidate for weak/moderate damping. When applied to a selection of 89 observed transverse loop oscillations, with their corresponding measurements of damping times scales and taking into account data uncertainties, we find that only in a few cases positive evidence for a given damping mechanism is available.

Solar tornadoes are dark vertical filamentary structures observed in the extreme ultraviolet associated with prominence legs and filament barbs. Their true nature and relationship to prominences requires understanding their magnetic structure and dynamic properties. Recently, a controversy has arisen: is the magnetic field organized forming vertical, helical structures or is it dominantly horizontal? And concerning their dynamics, are tornadoes really rotating or is it just a visual illusion? Here, we analyze four consecutive spectropolarimetric scans of a prominence hosting tornadoes on its legs which help us shed some light on their magnetic and dynamical properties. We show that the magnetic field is very smooth in all the prominence, probably an intrinsic property of the coronal field. The prominence legs have vertical helical fields that show slow temporal variation probably related to the motion of the fibrils. Concerning the dynamics, we argue that 1) if rotation exists, it is intermittent, lasting no more than one hour, and 2) the observed velocity pattern is also consistent with an oscillatory velocity pattern (waves).

The spatial variation of physical quantities, such as the mass density, across solar atmospheric waveguides governs the timescales and spatial scales for wave damping and energy dissipation. The direct measurement of the spatial distribution of density, however, is difficult and indirect seismology inversion methods have been suggested as an alternative. We applied Bayesian inference, model comparison, and model-averaging techniques to the inference of the cross-field density structuring in solar magnetic waveguides using information on periods and damping times for resonantly damped magnetohydrodynamic (MHD) transverse kink oscillations. Three commonly employed alternative profiles were used to model the variation of the mass density across the waveguide boundary. Parameter inference enabled us to obtain information on physical quantities such as the Alfv\'en travel time, the density contrast, and the transverse inhomogeneity length scale. The inference results from alternative density models were compared and their differences quantified. Then, the relative plausibility of the considered models was assessed by performing model comparison. Our results indicate that the evidence in favor of any of the three models is minimal, unless the oscillations are strongly damped. In such a circumstance, the application of model-averaging techniques enables the computation of an evidence-weighted inference that takes into account the plausibility of each model in the calculation of a combined inversion for the unknown physical parameters.

Quiescent solar prominence fine structures are typically modelled as density enhancements, called threads, which occupy a fraction of a longer magnetic flux tube. The profile of the mass density along the magnetic field is however unknown and several arbitrary alternatives are employed in prominence wave studies. We present a comparison of theoretical models for the field-aligned density along prominence fine structures. We consider Lorentzian, Gaussian, and parabolic profiles. We compare their theoretical predictions for the period ratio between the fundamental transverse kink mode and the first overtone to obtain estimates for the ratio of densities between the central part of the tube and its foot-points and to assess which one would better explain observed period ratio data. Bayesian parameter inference and model comparison techniques are developed and applied. Parameter inference requires the computation of the posterior distribution for the density gradient parameter conditional on the observable period ratio. Model comparison involves the computation of the marginal likelihood as a function of the period ratio to obtain the plausibility of each density model and the computation of Bayes Factors to quantify the relative evidence for each model, given a period ratio observation. A Lorentzian density profile, with plasma density concentrated around the centre of the tube seems to offer the most plausible inversion result. A Gaussian profile would require unrealistically large values of the density gradient parameter and a parabolic density distribution does not enable us to obtain well constrained posterior probability distributions. However, our model comparison results indicate that the evidence points to the Gaussian and parabolic profiles for period ratios in between 2 and 3, while the Lorentzian profile is preferred for larger period ratio values.

Coronal waves are an important aspect of the dynamics of the plasma in the corona. Wavefront dislocations are topological features of most waves in nature and also of magnetohydrodynamic waves. Are there dislocations in coronal waves? The finding and explanation of dislocations may shed light on the nature and characteristics of the propagating waves, their interaction in the corona and in general on the plasma dynamics. We positively identify dislocations in coronal waves observed by the Coronal Multi-channel Polarimeter (CoMP) as singularities in the Doppler shifts of emission coronal lines. We study the possible singularities that can be expected in coronal waves and try to reproduce the observed dislocations in terms of localization and frequency of appearance. The observed dislocations can only be explained by the interference of a kink and a sausage wave modes propagating with different frequencies along the coronal magnetic field. In the plane transverse to the propagation, the cross-section of the oscillating plasma must be smaller than the spatial resolution, and the two waves result in net longitudinal and transverse velocity components that are mixed through projection onto the line of sight. Alfv\'en waves can be responsible of the kink mode, but a magnetoacoustic sausage mode is necessary in all cases. Higher (flute) modes are excluded. The kink mode has a pressure amplitude that is smaller than the pressure amplitude of the sausage mode, though its observed velocity is larger. This concentrates dislocations on the top of the loop. To explain dislocations, any model of coronal waves must include the simultaneous propagation and interference of kink and sausage wave modes of comparable but different frequencies, with a sausage wave amplitude much smaller than the kink one.

Magnetic waves are a relevant component in the dynamics of the solar atmosphere. Their significance has increased because of their potential as a remote diagnostic tool and their presumed contribution to plasma heating processes. We discuss our current understanding on coronal heating by magnetic waves, based on recent observational evidence and theoretical advances. The discussion starts with a selection of observational discoveries that have brought magnetic waves to the forefront of the coronal heating discussion. Then, our theoretical understanding on the nature and properties of the observed waves and the physical processes that have been proposed to explain observations are described. Particular attention is given to the sequence of processes that link observed wave characteristics with concealed energy transport, dissipation, and heat conversion. We conclude with a commentary on how the combination of theory and observations should help us understanding and quantifying magnetic wave heating of the solar atmosphere.

Time and spatial damping of transverse magnetohydrodynamic (MHD) kink oscillations is a source of information on the cross-field variation of the plasma density in coronal waveguides. We show that a probabilistic approach to the problem of determining the density structuring from the observed damping of transverse oscillations enables us to obtain information on the two parameters that characterise the cross-field density profile. The inference is performed by computing the marginal posterior distributions for density contrast and transverse inhomo- geneity length-scale using Bayesian analysis and damping ratios for transverse oscillations under the assumption that damping is produced by resonant absorption. The obtained distributions show that, for damping times of a few oscillatory periods, low density contrasts and short inho- mogeneity length scales are more plausible in explaining observations. This means that valuable information on the cross-field density profile can be obtained even if the inversion problem, with two unknowns and one observable, is a mathematically ill-posed problem.

We present a Bayesian seismology inversion technique for propagating magnetohydrodynamic (MHD) transverse waves observed in coronal waveguides. The technique uses theoretical predictions for the spatial damping of propagating kink waves in transversely inhomogeneous coronal waveguides. It combines wave amplitude damping length scales along the waveguide with theoretical results for resonantly damped propagating kink waves to infer the plasma density variation across the oscillating structures. Provided the spatial dependence of the velocity amplitude along the propagation direction is measured and the existence of two different damping regimes is identified, the technique would enable us to fully constrain the transverse density structuring, providing estimates for the density contrast and its transverse inhomogeneity length scale.

The analysis of quickly damped transverse oscillations of solar coronal loops using magneto-hydrodynamic seismology allow us to infer physical parameters that are difficult to measure otherwise. Under the assumption that such damped oscillations are due to the resonant conversion of global modes into Alfven oscillations of the tube surface, we carry out a global seismological analysis of a large set of coronal loops. A Bayesian hierarchical method is used to obtain distributions for coronal loop physical parameters by means of a global analysis of a large number of observations. The resulting distributions summarise global information and constitute data-favoured information that can be used for the inversion of individual events. The results strongly suggest that internal Alfven travel times along the loop are larger than 100 s and smaller than 540 s with 95% probability. Likewise, the density contrast between the loop interior and the surrounding is larger than 2.3 and below 6.9 with 95% probability.

The detection of multiple mode harmonic kink oscillations in coronal loops enables to obtain information on coronal density stratification and magnetic field expansion using seismology inversion techniques. The inference is based on the measurement of the period ratio between the fundamental mode and the first overtone and theoretical results for the period ratio under the hypotheses of coronal density stratification and magnetic field expansion of the wave guide. We present a Bayesian analysis of multiple mode harmonic oscillations for the inversion of the density scale height and magnetic flux tube expansion, under each of the hypotheses. Then, the two models are compared using a Bayesian model comparison scheme to assess how plausible each one is, given our current state of knowledge.

Observations show that propagating magnetohydrodynamic (MHD) waves are ubiquitous in the solar atmosphere. The technique of MHD seismology uses the wave observations combined with MHD wave theory to indirectly infer physical parameters of the solar atmospheric plasma and magnetic field. Here we present an analytical seismological inversion scheme for propagating MHD waves. This scheme uses in a consistent manner the observational information on wavelengths and damping lengths, along with observed values of periods or phase velocities, and is based on approximate asymptotic expressions for the theoretical values of wavelengths and damping lengths. The applicability of the inversion scheme is discussed and an example is given.

Magnetohydrodynamic (MHD) waves are ubiquitous in the solar atmosphere. Alfven waves and magneto-sonic waves are particular classes of MHD waves. These wave modes are clearly different and have pure properties in uniform plasmas of infinite extent only. Due to plasma non-uniformity MHD waves have mixed properties and cannot be classified as pure Alfven or magneto-sonic waves. However, vorticity is a quantity unequivocally related to Alfven waves as compression is for magneto-sonic waves. Here, we investigate MHD waves superimposed on a one-dimensional non-uniform straight cylinder with constant magnetic field. For a piecewise constant density profile we find that the fundamental radial modes of the non-axisymmetric waves have the same properties as surface Alfven waves at a true discontinuity in density. Contrary to the classic Alfveen waves in a uniform plasma of infinite extent, vorticity is zero everywhere except at the cylinder boundary. If the discontinuity in density is replaced with a continuous variation of density, vorticity is spread out over the whole interval with non-uniform density. The fundamental radial modes of the non-axisymmetric waves do not need compression to exist unlike the radial overtones. In thin magnetic cylinders the fundamental radial modes of the non-axisymmetric waves with phase velocities between the internal and the external Alfven velocities can be considered as surface Alfven waves. On the contrary, the radial overtones can be related to fast-like magneto-sonic modes.

Magnetohydrodynamic (MHD) wave activity is ubiquitous in the solar atmosphere. MHD seismology aims to determine difficult to measure physical parameters in solar atmospheric magnetic and plasma structures by a combination of observed and theoretical properties of MHD waves and oscillations. This technique, similar to seismology or helio-seismology, demands the solution of two problems. The direct problem involves the computation of wave properties of given theoretical models. The inverse problem implies the calculation of unknown physical parameters, by means of a comparison of observed and theoretical wave properties. Solar atmospheric seismology has been successfully applied to different structures such as coronal loops, prominence fine structures, spicules, or jets. However, it is still in its infancy. Far more is there to come. We present an overview of recent results, with particular emphasis in the inversion procedure.

Given the difficulty in directly determining prominence physical parameters from observations, prominence seismology stands as an alternative method to probe the nature of these structures. We show recent examples of the application of magnetohydrodynamic (MHD) seismology techniques to infer physical parameters in prominence plasmas. They are based on the application of inversion techniques using observed periods, damping times, and plasma flow speeds of prominence thread oscillations. The contribution of Hinode to the subject has been of central importance. We show an example based on data obtained with Hinode's Solar Optical Telescope. Observations show an active region limb prominence, composed by a myriad of thin horizontal threads that flow following a path parallel to the photosphere and display synchronous vertical oscillations. The coexistence of waves and flows can be firmly established. By making use of an interpretation based on transverse MHD kink oscillations, a seismological analysis of this event is performed. It is shown that the combination of high quality Hinode observations and proper theoretical models allows flows and waves to become two useful characteristics for our understanding of the nature of solar prominences.

We investigate the temporal evolution of impulsively generated perturbations in a potential coronal arcade with an embedded loop. As the initial configuration we consider a coronal loop, represented by a density enhancement, which is unbounded in the ignorable direction of the arcade. The linearized time-dependent magnetohydrodynamic equations have been numerically solved in field-aligned coordinates and the time evolution of the initial perturbations has been studied in the zero-beta approximation. For propagation constrained to the plane of the arcade, the considered initial perturbations do not excite trapped modes of the system. This weakness of the model is overcome by the inclusion of wave propagation in the ignorable direction. The inclusion of perpendicular propagation produces two main results. First, damping by wave leakage is less efficient because the loop is able to act as a wave trap of vertical oscillations. Second, the consideration of an inhomogeneous corona enables the resonant damping of vertical oscillations and the energy transfer from the interior of the loop to the external coronal medium.

We analyse the oscillatory properties of resonantly damped transverse kink oscillations in two-dimensional prominence threads. The fine structures are modelled as cylindrically symmetric magnetic flux tubes with a dense central part with prominence plasma properties and an evacuated part, both surrounded by coronal plasma. The equilibrium density is allowed to vary non-uniformly in both the transverse and the longitudinal directions.We examine the influence of longitudinal density structuring on periods, damping times, and damping rates for transverse kink modes computed by numerically solving the linear resistive magnetohydrodynamic (MHD) equations. The relevant parameters are the length of the thread and the density in the evacuated part of the tube, two quantities that are difficult to directly estimate from observations. We find that both of them strongly influence the oscillatory periods and damping times, and to a lesser extent the damping ratios. The analysis of the spatial distribution of perturbations and of the energy flux into the resonances allows us to explain the obtained damping times. Implications for prominence seismology, the physics of resonantly damped kink modes in two-dimensional magnetic flux tubes, and the heating of prominence plasmas are discussed.

We perform a Bayesian parameter inference in the context of resonantly damped transverse coronal loop oscillations. The forward problem is solved in terms of parametric results for kink waves in one-dimensional flux tubes in the thin tube and thin boundary approximations. For the inverse problem, we adopt a Bayesian approach to infer the most probable values of the relevant parameters, for given observed periods and damping times, and to extract their confidence levels. The posterior probability distribution functions are obtained by means of Markov Chain Monte Carlo simulations, incorporating observed uncertainties in a consistent manner. We find well localized solutions in the posterior probability distribution functions for two of the three parameters of interest, namely the Alfven travel time and the transverse inhomogeneity length-scale. The obtained estimates for the Alfven travel time are consistent with previous inversion results, but the method enables us to additionally constrain the transverse inhomogeneity length-scale and to estimate real error bars for each parameter. When observational estimates for the density contrast are used, the method enables us to fully constrain the three parameters of interest. These results can serve to improve our current estimates of unknown physical parameters in coronal loops and to test the assumed theoretical model.

There are ubiquitous flows observed in the solar atmosphere of sub-Alfv\'{e}nic speeds, however after flaring and coronal mass ejection events flows can become Alfv\'{e}nic. In this Letter, we derive an expression for the standing kink mode frequency due to siphon flow in coronal loops, valid for both low and high speed regimes. It is found that siphon flow introduces a linear spatially dependent phase shift along coronal loops and asymmetric eigenfunctions. We demonstrate how this theory can be used to determine the kink and flow speed of oscillating coronal loops with reference to an observational case study. It is shown that the presence of siphon flow can cause the underestimation of magnetic field strength in coronal loops using the traditional seismological methods.

We investigate standing kink magnetohydrodynamic (MHD) oscillations in a prominence fine structure modeled as a straight and cylindrical magnetic tube only partially filled with the prominence material, and with its ends fixed at two rigid walls representing the solar photosphere. The prominence plasma is partially ionized and a transverse inhomogeneous transitional layer is included between the prominence thread and the coronal medium. Thus, ion-neutral collisions and resonant absorption are the considered damping mechanisms. Approximate analytical expressions of the period, the damping time, and their ratio are derived for the fundamental mode in the thin tube and thin boundary approximations. We find that the dominant damping mechanism is resonant absorption, which provides damping ratios in agreement with the observations, whereas ion-neutral collisions are irrelevant for the damping. The values of the damping ratio are independent of both the prominence thread length and its position within the magnetic tube, and coincide with the values for a tube fully filled with the prominence plasma. The implications of our results in the context of the MHD seismology technique are discussed, pointing out that the reported short-period (2 - 10 min) and short-wavelength (700 - 8,000 km) thread oscillations may not be consistent with a standing mode interpretation and could be related to propagating waves. Finally, we show that the inversion of some prominence physical parameters, e.g., Alfv\'en speed, magnetic field strength, transverse inhomogeneity length-scale, etc., is possible using observationally determined values of the period and damping time of the oscillations along with the analytical approximations of these quantities.

Small amplitude oscillations are a commonly observed feature in prominences/filaments. These oscillations appear to be of local nature, are associated to the fine structure of prominence plasmas, and simultaneous flows and counterflows are also present. The existing observational evidence reveals that small amplitude oscillations, after excited, are damped in short spatial and temporal scales by some as yet not well determined physical mechanism(s). Commonly, these oscillations have been interpreted in terms of linear magnetohydrodynamic (MHD) waves, and this paper reviews the theoretical damping mechanisms that have been recently put forward in order to explain the observed attenuation scales. These mechanisms include thermal effects, through non-adiabatic processes, mass flows, resonant damping in non-uniform media, and partial ionization effects. The relevance of each mechanism is assessed by comparing the spatial and time scales produced by each of them with those obtained from observations. Also, the application of the latest theoretical results to perform prominence seismology is discussed, aiming to determine physical parameters in prominence plasmas that are difficult to measure by direct means.

We numerically investigate the excitation and temporal evolution of oscillations in a two-dimensional coronal arcade by including the three-dimensional propagation of perturbations. The time evolution of impulsively generated perturbations is studied by solving the linear, ideal magnetohydrodynamic (MHD) equations in the zero-beta approximation. As we neglect gas pressure the slow mode is absent and therefore only coupled MHD fast and Alfven modes remain. Two types of numerical experiments are performed. First, the resonant wave energy transfer between a fast normal mode of the system and local Alfven waves is analyzed. It is seen how, because of resonant coupling, the fast wave with global character transfers its energy to Alfvenic oscillations localized around a particular magnetic surface within the arcade, thus producing the damping of the initial fast MHD mode. Second, the time evolution of a localized impulsive excitation, trying to mimic a nearby coronal disturbance, is considered. In this case, the generated fast wavefront leaves its energy on several magnetic surfaces within the arcade. The system is therefore able to trap energy in the form of Alfvenic oscillations, even in the absence of a density enhancement such as that of a coronal loop. These local oscillations are subsequently phase-mixed to smaller spatial scales. The amount of wave energy trapped by the system via wave energy conversion strongly depends on the wavelength of perturbations in the perpendicular direction, but is almost independent from the ratio of the magnetic to density scale heights.

Magnetohydrodynamic (MHD) waves are often reported in the solar atmosphere and usually classified as slow, fast, or Alfv\'en. The possibility that these waves have mixed properties is often ignored. The goal of this work is to study and determine the nature of MHD kink waves. This is done by calculating the frequency, the damping rate and the eigenfunctions of MHD kink waves for three widely different MHD waves cases: a compressible pressure-less plasma, an incompressible plasma and a compressible plasma with non-zero plasma pressure which allows for MHD radiation. In all three cases the frequency and the damping rate are for practical purposes the same as they differ at most by terms proportional to $(k_z R)^2$. In the magnetic flux tube the kink waves are in all three cases, to a high degree of accuracy incompressible waves with negligible pressure perturbations and with mainly horizontal motions. The main restoring force of kink waves in the magnetised flux tube is the magnetic tension force. The total pressure gradient force cannot be neglected except when the frequency of the kink wave is equal or slightly differs from the local Alfv\'{e}n frequency, i.e. in the resonant layer. Kink waves are very robust and do not care about the details of the MHD wave environment. The adjective fast is not the correct adjective to characterise kink waves. If an adjective is to be used it should be Alfv\'{e}nic. However, it is better to realize that kink waves have mixed properties and cannot be put in one single box.

First results from a high-resolution three-dimensional nonlinear numerical study of the kink oscillation are presented. We show in detail the development of a shear instability in an untwisted line-tied magnetic flux tube. The instability produces significant deformations of the tube boundary. An extended transition layer may naturally evolve as a result of the shear instability at a sharp transition between the flux tube and the external medium. We also discuss the possible effects of the instability on the process of resonant absorption when an inhomogeneous layer is included in the model. One of the implications of these results is that the azimuthal component of the magnetic field of a stable flux tube in the solar corona, needed to prevent the shear instability, is probably constrained to be in a very specific range.

High-resolution observations provide evidence about the existence of small-amplitude transverse oscillations in solar filament fine structures. These oscillations are believed to represent fast magnetohydrodynamic (MHD) waves and the disturbances are seen to be damped in short timescales of the order of 1 to 4 periods. In this Letter we propose that, due to the highly inhomogeneous nature of the filament plasma at the fine structure spatial scale, the phenomenon of resonant absorption is likely to operate in the temporal attenuation of fast MHD oscillations. By considering transverse inhomogeneity in a straight flux tube model we find that, for density inhomogeneities typical of filament threads, the decay times are of a few oscillatory periods only.

We present an analytic approximate seismic inversion scheme for damped transverse coronal loop oscillations based on the thin tube and thin boundary approximation for computing the period and the damping time. Asymptotic expressions for the period and damping rate are used to illustrate the process of seismological inversion in a simple and easy to follow manner. The inversion procedure is formulated in terms of two simple functions, which are given by simple closed expressions. The analytic seismic inversion shows that an infinite amount of 1-dimensional equilibrium models can reproduce the observed periods and damping times. It predicts a specific range of allowable values for the Alfven travel time and lower bounds for the density contrast and the inhomogeneity length scale. When the results of the present analytic seismic inversion are compared with those of a previous numerical inversion, excellent agreement is found up to the point that the analytic seismic inversion emerges as a tool for validating results of numerical inversions. Actually it helped us to identify and correct inaccuracies in a previous numerical investigation.

Recent observations with the Hinode Solar Optical Telescope display an active region prominence whose fine threads oscillate in the vertical direction as they move along a path parallel to the photosphere. A seismological analysis of this event is carried out by taking advantage of the small radius of these structures compared to the total length of magnetic field lines, i.e. by using the thin tube approximation. This analysis reveals that the oscillatory period is only slightly modified by the existence of the flow and that the difference between the period of a flowing thread and a static one is below the error bars of these observations. Moreover, although it is not possible to obtain values of the physical parameters, a lower bound for the Alfv\'en speed (ranging between 120 km s$^{-1}$ and 350 km s$^{-1}$) is obtained for each of the threads. Such Alfv\'en speeds agree with the intense magnetic fields and large densities usually found in active region prominences.

There is not as yet full agreement on the mechanism that causes the rapid damping of the oscillations observed by TRACE in coronal loops. It has been suggested that the variation of the observed values of the damping time as function of the corresponding observed values of the period contains information on the possible damping mechanism. The aim of this Letter is to show that, for resonant absorption, this is definitely not the case unless detailed a priori information on the individual loops is available.

We study the excitation and damping of transverse oscillations in a multi-stranded model of a straight line-tied coronal loop. The transverse geometry of our equilibrium configuration is quite irregular and more realistic than the usual cylindrical loop model. By numerically solving the time-dependent ideal magnetohydrodynamic equations in two dimensions we show how the global motion of the whole bundle of strands, excited by an external disturbance, is converted into localized Alfv\'enic motions due to the process of resonant absorption. This process produces the attenuation of the transverse oscillations. At any location in the structure two dominant frequencies are found, the frequency of the global mode, or quasi-mode, and the local Alfv\'en frequency. We find that the mechanism of mode conversion, due to the coupling between fast and Alfv\'en waves, is not compromised by the complicated geometry of the model. We also show that it is possible to have energy conversion not only at the external edge of the composite loop but also inside the structure. The implications of these results and their relationship with the observations are discussed.

The theory of magnetohydrodynamic (MHD) waves in solar coronal slabs in a zero-$\beta$ configuration and for parallel propagation of waves does not allow the existence of surface waves. When oblique propagation of perturbations is considered both surface and body waves are able to propagate. When the perpendicular wave number is larger than a certain value, the body kink mode becomes a surface wave. In addition, a sausage surface mode is found below the internal cut-off frequency. When non-uniformity in the equilibrium is included, surface and body modes are damped due to resonant absorption. In this paper, first, a normal-mode analysis is performed and the period, the damping rate, and the spatial structure of eigenfunctions are obtained. Then, the time-dependent problem is solved, and the conditions under which one or the other type of mode is excited are investigated.

Observations of transversal coronal loop oscillations very often show the excitation and damping of oscillations in groups of coronal loops rather than in individual and isolated structures. We present results on the oscillatory properties (periods, damping rates, and spatial distribution of perturbations) for resonantly damped oscillations in a system of two inhomogeneous coronal slabs and compare them to the properties found in single slab loop models. A system of two identical coronal loops is modeled, in Cartesian geometry, as being composed by two density enhancements. The linear magnetohydrodynamic (MHD) wave equations for oblique propagation of waves are solved and the damping of the different solutions, due to the transversal inhomogeneity of the density profile, is computed. The physics of the obtained results is analyzed by an examination of the perturbed physical variables. We find that, due to the interaction between the loops, the normal modes of oscillation present in a single slab split into symmetric and antisymmetric oscillations when a system of two identical slabs is considered. The frequencies of these solutions may differ from the single slab results when the distance between the loops is of the order of a few slab widths. Oblique propagation of waves weakens this interaction, since solutions become more confined to the edges of the slabs. The damping is strong for surface-like oscillations, while sausage body-like solutions are unaffected. For some solutions, and small slab separations, the damping in a system of two loops differs substantially from the damping of a single loop.