We measure the cosmological bias factor of DLAs from their cross-correlation with the Ly$\alpha$ forest absorption, as a function of the DLA metal strength, defined from an average of equivalent widths of the strongest detectable low-ionization metal lines. A clear increase of the bias factor with metal strength is detected, as expected from a relation of metallicity and velocity dispersion with host halo mass. The relation is stronger after the metal strength is corrected for the HI column density, to make it more related to metallicity instead of metal column density. After correcting for the effects of measurement errors of the metal strength parameter, we find that the bias factor of DLAs with the weakest metal lines is close to unity, consistent with an origin in dwarf galaxies with host halo masses $\sim10^{10} M_{\odot}$, whereas the most metal rich DLAs have a bias factor as large as $b_{\rm DLA} \sim 3$, indicative of massive galaxies or galaxy groups in host halos with masses $\sim 10^{12} M_{\odot}$. Our result confirms the physical origin of the relation of bias factors measured from cross-correlation studies to the host halos of the absorbers.

The Baryon Oscillation Spectroscopic Survey of SDSS-III has provided an unprecedentedly large sample of Damped \lya systems (DLAs), the largest repositories of neutral hydrogen in the Universe. This DLA sample has been used to determine the DLA bias factor from their cross-correlation with the \lya forest absorption in \cite{FontRibera2012,Perez2018}, showing that DLAs are associated with relatively massive halos. However, the low resolution and signal-to-noise of BOSS spectra do not allow precise measurements of the DLA metal lines. We define a metal strength parameter, $S$, based on combining equivalent widths of 17 metal lines, that can be measured with an optimal signal-to-noise ratio for individual DLAs in BOSS spectra, allowing for the classification of the DLA population into subgroups of different $S$. We present the distribution of this DLA metal strength and the dependence of its mean value on $N_{\rm HI}$ and redshift. We search for systematic effects and variations in the catalogue purity by examining the dependence of the $S$ distribution on the spectral signal-to-noise and the estimated error on $S$. A catalogue of DLAs with measured equivalent widths for the selected 17 metal lines and the value of $S$ is made publicly available, which will be used to measure the dependence of the DLA bias factor on the $S$ parameter. The relation of the metal strength on the gas metal abundances and velocity dispersion can be constrained by studying the stacked metal absorption spectra of DLAs as a function of $S$, allowing for future determinations of the dependence of the bias factor on the metallicity and velocity dispersion of DLAs.

We study the mean absorption spectrum of the Damped Lyman alpha population at $z\sim 2.6$ by stacking normalized, rest-frame shifted spectra of $\sim 27\,000$ DLAs from the DR12 of BOSS/SDSS-III. We measure the equivalent widths of 50 individual metal absorption lines in 5 intervals of DLA hydrogen column density, 5 intervals of DLA redshift, and overall mean equivalent widths for an additional 13 absorption features from groups of strongly blended lines. The mean equivalent width of low-ionization lines increases with $N_{\rm HI}$, whereas for high-ionization lines the increase is much weaker. The mean metal line equivalent widths decrease by a factor $\sim 1.1-1.5$ from $z\sim2.1$ to $z \sim 3.5$, with small or no differences between low- and high-ionization species. We develop a theoretical model, inspired by the presence of multiple absorption components observed in high-resolution spectra, to infer mean metal column densities from the equivalent widths of partially saturated metal lines. We apply this model to 14 low-ionization species and to AlIII, SIII, SiIII, CIV, SiIV, NV and OVI. We use an approximate derivation for separating the equivalent width contributions of several lines to blended absorption features, and infer mean equivalent widths and column densities from lines of the additional species NI, ZnII, CII${}^{*}$, FeIII, and SIV. Several of these mean column densities of metal lines in DLAs are obtained for the first time; their values generally agree with measurements of individual DLAs from high-resolution, high signal-to-noise ratio spectra when they are available.

In recent years, the Lyman-$\alpha$ absorption observed in the spectra of high-redshift quasars has been used as a tracer of large-scale structure by means of the three-dimensional Lyman-$\alpha$ forest auto-correlation function at redshift $z\simeq 2.3$, but the need to fit the quasar continuum in every absorption spectrum introduces a broadband distortion that is difficult to correct and causes a systematic error for measuring any broadband properties. We describe a $k$-space model for this broadband distortion based on a multiplicative correction to the power spectrum of the transmitted flux fraction that suppresses power on scales corresponding to the typical length of a Lyman-$\alpha$ forest spectrum. Implementing the distortion model in fits for the baryon acoustic oscillation (BAO) peak position in the Lyman-$\alpha$ forest auto-correlation, we find that the fitting method recovers the input values of the linear bias parameter $b_{F}$ and the redshift-space distortion parameter $\beta_{F}$ for mock data sets with a systematic error of less than 0.5\%. Applied to the auto-correlation measured for BOSS Data Release 11, our method improves on the previous treatment of broadband distortions in BAO fitting by providing a better fit to the data using fewer parameters and reducing the statistical errors on $\beta_{F}$ and the combination $b_{F}(1+\beta_{F})$ by more than a factor of seven. The measured values at redshift $z=2.3$ are $\beta_{F}=1.39^{+0.11\ +0.24\ +0.38}_{-0.10\ -0.19\ -0.28}$ and $b_{F}(1+\beta_{F})=-0.374^{+0.007\ +0.013\ +0.020}_{-0.007\ -0.014\ -0.022}$ (1$\sigma$, 2$\sigma$ and 3$\sigma$ statistical errors). Our fitting software and the input files needed to reproduce our main results are publicly available.

The Lyman alpha forest power spectrum has been measured on large scales by the BOSS survey in SDSS-III at $z\sim 2.3$, has been shown to agree well with linear theory predictions, and has provided the first measurement of Baryon Acoustic Oscillations at this redshift. However, the power at small scales, affected by non-linearities, has not been well examined so far. We present results from a variety of hydrodynamic simulations to predict the redshift space non-linear power spectrum of the Lyman Alpha transmission for several models, testing the dependence on resolution and box size. A new fitting formula is introduced to facilitate the comparison of our simulation results with observations and other simulations. The non-linear power spectrum has a generic shape determined by a transition scale from linear to non-linear anisotropy, and a Jeans scale below which the power drops rapidly. In addition, we predict the two linear bias factors of the Lyman Alpha forest and provide a better physical interpretation of their values and redshift evolution. The dependence of these bias factors and the non-linear power on the amplitude and slope of the primordial fluctuations power spectrum, the temperature-density relation of the intergalactic medium, and the mean Lyman Alpha transmission, as well as the redshift evolution, is investigated and discussed in detail. A preliminary comparison to the observations shows that the predicted redshift distortion parameter is in good agreement with the recent determination of Blomqvist et al., but the density bias factor is lower than observed. We make all our results publicly available in the form of tables of the non-linear power spectrum that is directly obtained from all our simulations, and parameters of our fitting formula.

We present the first observations of foreground Lyman-$\alpha$ forest absorption from high-redshift galaxies, targeting 24 star-forming galaxies (SFGs) with $z\sim 2.3-2.8$ within a $5' \times 15'$ region of the COSMOS field. The transverse sightline separation is $\sim 2\,h^{-1}\mathrm{Mpc}$ comoving, allowing us to create a tomographic reconstruction of the 3D Ly$\alpha$ forest absorption field over the redshift range $2.20\leq z\leq 2.45$. The resulting map covers $6\,h^{-1}\mathrm{Mpc} \times 14\,h^{-1}\mathrm{Mpc}$ in the transverse plane and $230\,h^{-1}\mathrm{Mpc}$ along the line-of-sight with a spatial resolution of $\approx 3.5\,h^{-1}\mathrm{Mpc}$, and is the first high-fidelity map of large-scale structure on $\sim\mathrm{Mpc}$ scales at $z>2$. Our map reveals significant structures with $\gtrsim 10\,h^{-1}\mathrm{Mpc}$ extent, including several spanning the entire transverse breadth, providing qualitative evidence for the filamentary structures predicted to exist in the high-redshift cosmic web. Simulated reconstructions with the same sightline sampling, spectral resolution, and signal-to-noise ratio recover the salient structures present in the underlying 3D absorption fields. Using data from other surveys, we identified 18 galaxies with known redshifts coeval with our map volume enabling a direct comparison to our tomographic map. This shows that galaxies preferentially occupy high-density regions, in qualitative agreement with the same comparison applied to simulations. Our results establishes the feasibility of the CLAMATO survey, which aims to obtain Ly$\alpha$ forest spectra for $\sim 1000$ SFGs over $\sim 1 \,\mathrm{deg}^2$ of the COSMOS field, in order to map out IGM large-scale structure at $\langle z \rangle \sim 2.3$ over a large volume $(100\,h^{-1}\mathrm{Mpc})^3$.