Normalized to: Arezki, B.
[2]
oai:arXiv.org:1607.01560 [pdf] - 1530963
Experimental demonstration of a crossed cubes nuller for coronagraphy
and interferometry
Submitted: 2016-07-06
In this communication we present the first experimental results obtained on
the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter
(APS) based on a pair of crossed beamsplitter cubes. We review the general
principle of the CCN, now restricted to two interferometric outputs for
achieving better performance, and describe the experimental apparatus developed
in our laboratory. It is cheap, compact, and easy to align. The results
demonstrate a high extinction rate in monochromatic light and confirm that the
device is insensitive to its polarization state. Finally, the first lessons
from the experiment are summarized and discussed in view of future space
missions searching for extra-solar planets located in the habitable zone,
either based on a coronagraphic telescope or a sparse-aperture nulling
interferometer
[3]
oai:arXiv.org:1207.4811 [pdf] - 1124972
Advances in the Development of Mid-Infrared Integrated Devices for
Interferometric Arrays
Labadie, L.;
Martin, Guillermo;
Rodenas, Airan;
Anheier, Norman C.;
Arezki, Brahim;
Thomson, Robert R.;
Qiao, Hong A.;
Kern, Pierre;
Kar, Ajoy K.;
Bernacki, Bruce E.
Submitted: 2012-07-19
This article reports the advances on the development of mid-infrared
integrated optics for stellar interferometry. The devices are fabricated by
laser writing techniques on chalcogenide glasses. Laboratory characterizaton is
reported and analyzed.
[4]
oai:arXiv.org:1104.2899 [pdf] - 1053385
First fringes with an integrated-optics beam combiner at 10 um - A new
step towards instrument miniaturization for mid-infrared interferometry
Submitted: 2011-04-14
Observations at mas-resolution scales and high dynamic range hold a central
place in achieving, for instance, the spectroscopic characterization of
exo-Earths or the detailed mapping of their protoplanetary disc birthplace.
Ground or space-based multi-aperture infrared interferometry is a promising
technique to tackle these goals. But significant efforts still need to be
undertaken to achieve a simplification of these instruments if we want to
combine the light from a large number of telescopes. Integrated-optics appears
as an alternative to the current conventional designs, especially if its use
can be extended to a higher number of astronomical bands. This article reports
for the first time the experimental demonstration of the feasibility of an
integrated-optics approach to mid-infrared beam combination for single-mode
stellar interferometry. We have fabricated a 2-telescope beam combiner
prototype integrated on a substrate of chalcogenide glasses, a material
transparent from 1 to 14 um. We have developed laboratory tools to characterize
the modal properties and the interferometric capabilities of our device. We
obtain fringes at 10 um and measure a mean contrast V=0.981 \pm 0.001 with high
repeatability over one week and high stability over 5h. We show experimentally
- as well as on the basis of modeling considerations - that the component has a
single-mode behavior at this wavelength, which is essential to achieve
high-accuracy interferometry. From previous studies, the propagation losses are
estimated to 0.5 dB/cm for such components. We also discuss possible issues
that may impact the interferometric contrast. The IO beam combiner performs
well at 10. We also anticipate the requirement of a better matching between the
numerical apertures of the component and the (de)coupling optics to optimize
the total throughput. The next step foreseen is the achievement of wide-band
interferograms.
[5]
oai:arXiv.org:0801.2407 [pdf] - 2068867
Transmission behaviors of single mode hollow metallic waveguides
dedicated to mid-infrared nulling interferometry
Submitted: 2008-01-15
This paper reports the characterization of hollow metallic waveguides (HMW)
to be used as single-mode wavefront filters for nulling interferometry in the
6-20 microns range. The measurements presented here were performed using both
single-mode and multimode conductive waveguides at 10.6 microns. We found
propagation losses of about 16dB/mm, which are mainly due to the theoretical
skin effect absorption in addition to the roughness of the waveguide metallic
walls. The input and output coupling efficiency of our samples has been
improved by adding tapers to minimize the impedance mismatch. A proper
distinction between propagation losses and coupling losses is presented.
Despite their elevate propagation losses, HMW show excellent spatial filtering
capabilities in a spectral range where photonics technologies are only
emerging.
[6]
oai:arXiv.org:0705.0146 [pdf] - 906
Mid-infrared laser light nulling experiment using single-mode conductive
waveguides
Submitted: 2007-05-01
Aims: In the context of space interferometry missions devoted to the search
of exo-Earths, this paper investigates the capabilities of new single mode
conductive waveguides at providing modal filtering in an infrared and
monochromatic nulling experiment; Methods: A Michelson laser interferometer
with a co-axial beam combination scheme at 10.6 microns is used. After
introducing a Pi phase shift using a translating mirror, dynamic and static
measurements of the nulling ratio are performed in the two cases where modal
filtering is implemented and suppressed. No additional active control of the
wavefront errors is involved. Results: We achieve on average a statistical
nulling ratio of 2.5e-4 with a 1-sigma upper limit of 6e-4, while a best null
of 5.6e-5 is obtained in static mode. At the moment, the impact of external
vibrations limits our ability to maintain the null to 10 to 20 seconds.;
Conclusions: A positive effect of SM conductive waveguide on modal filtering
has been observed in this study. Further improvement of the null should be
possible with proper mechanical isolation of the setup.
[7]
oai:arXiv.org:astro-ph/0610936 [pdf] - 86360
Direct constraint on the distance of y2 Velorum from AMBER/VLTI
observations
Millour, F.;
Petrov, R. G.;
Chesneau, O.;
Bonneau, D.;
Dessart, L.;
Bechet, C.;
Tallon-Bosc, I.;
Tallon, M.;
Thiébaut, E.;
Vakili, F.;
Malbet, F.;
Mourard, D.;
Zins, G.;
Roussel, A.;
Robbe-Dubois, S.;
Puget, P.;
Perraut, K.;
Lisi, F.;
Coarer, E. Le;
Lagarde, S.;
Kern, P.;
Glück, L.;
Duvert, G.;
Chelli, A.;
Bresson, Y.;
Beckmann, U.;
Antonelli, P.;
Weigelt, G.;
Ventura, N.;
Vannier, M.;
Valtier, J. -C.;
Testi, L.;
Tatulli, E.;
Tasso, D.;
Stefanini, P.;
Stee, P.;
Solscheid, W.;
Schertl, D.;
Salinari, P.;
Sacchettini, M.;
Richichi, A.;
Reynaud, F.;
Rebattu, S.;
Rabbia, Y.;
Preibisch, T.;
Perrier, C.;
Pacini, F.;
Ohnaka, K.;
Nussbaum, E.;
Mouillet, D.;
Monin, J. -L.;
Mège, P.;
Mathias, P.;
Martinot-Lagarde, G.;
Mars, G.;
Marconi, A.;
Magnard, Y.;
Lopez, B.;
Contel, D. Le;
Contel, J. -M. Le;
Kraus, S.;
Kamm, D.;
Hofmann, K. -H.;
Utrera, O. Hernandez;
Heininger, M.;
Heiden, M.;
Gil, C.;
Giani, E.;
Glentzlin, A.;
Gennari, S.;
Gallardo, A.;
Fraix-Burnet, D.;
Foy, R.;
Fossat, E.;
Forveille, T.;
Ferruzzi, D.;
Feautrier, P.;
Dugué, M.;
Driebe, T.;
De Souza, A. Domiciano;
Delboulbé, A.;
Connot, C.;
Colin, J.;
Clausse, J. -M.;
Cassaing, F.;
Busoni, S.;
Bonhomme, S.;
Blöcker, T.;
Behrend, J.;
Baffa, C.;
Aristidi, E.;
Arezki, B.;
Agabi, K.;
Acke, B.;
Accardo, M.;
Kiekebusch, M.;
Rantakyrö, F.;
Schoeller, Markus
Submitted: 2006-10-31
In this work, we present the first AMBER observations, of the Wolf-Rayet and
O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the
telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered
spectrally dispersed visibilities, as well as differential and closure phases,
with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret
these data in the context of a binary system with unresolved components,
neglecting in a first approximation the wind-wind collision zone flux
contribution. We show that the AMBER observables result primarily from the
contribution of the individual components of the WR+O binary system. We discuss
several interpretations of the residuals, and speculate on the detection of an
additional continuum component, originating from the free-free emission
associated with the wind-wind collision zone (WWCZ), and contributing at most
to the observed K-band flux at the 5% level. The expected absolute separation
and position angle at the time of observations were 5.1±0.9mas and
66±15° respectively. However, we infer a separation of
3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus
implies that the binary system lies at a distance of 368+38-13 pc, in agreement
with recent spectrophotometric estimates, but significantly larger than the
Hipparcos value of 258+41-31 pc.
[8]
oai:arXiv.org:astro-ph/0608198 [pdf] - 84075
M-lines characterization of selenide and telluride waveguides for
mid-infrared interferometry
Submitted: 2006-08-09
Nulling interferometry is an astronomical technique that combines equal
wavefronts to achieve a deep rejection ratio of an on-axis star, and that could
permit to detect Earth-like planets in the mid-infrared band 5 -- 20 microns.
Similarly to what is done in the near-infrared, high frequencies spatial
filtering of the incoming beams can be achieved using single-mode waveguides
operating in the mid-infrared. An appreciable reduction of the instrumental
complexity is also possible using integrated optics (IO) devices in this
spectral range. The relative lack of single-mode guided optics in the
mid-infrared has motivated the present technological study to demonstrate the
feasibility of dielectric waveguides functioning at longer wavelengths. We
propose to use selenide and telluride components to pursue the development of
more complex IO functions.
[9]
oai:arXiv.org:astro-ph/0511298 [pdf] - 77656
Modal Filtering for Nulling Interferometry-First Single-Mode Conductive
Waveguides in the Mid-Infrared
Submitted: 2005-11-10
This paper presents the work achieved for the manufacturing and
characterization of first single-mode waveguides to be used as modal filters
for nulling interferometry in the mid-infrared range [4-20 um]. As very high
dynamic range is mandatory for detection of Earth-like planets, modal filtering
is one of the most stringent instrumental aspects. The hollow metallic
waveguides (HMW) presented here are manufactured using micro-machining
techniques. Single-mode behavior has been investigated in laboratory through a
technique of polarization analysis while transmission features have been
measured using flux relative comparison. The single-mode behavior have been
assessed at lambda=10.6 um for rectangular waveguides with dimensions a=10 um
and b<5.3 um with an accuracy of ~2.5 %. The tests have shown that a
single-polarization state can be maintained in the waveguide. A comparison with
results on multi-mode HMW is proposed. Excess losses of 2.4 dB (~ 58 %
transmission) have been measured for a single-mode waveguide. In particular,
the importance of coupling conditions into the waveguide is emphasized here.
The goal of manufacturing and characterizing the first single-mode HMW for the
mid-infrared has been achieved. This opens the road to the use of integrated
optics for interferometry in the mentioned spectral range.