Aims. We use high-resolution spectropolarimetric observations in the Ca ii 8542 A line obtained with the SST to study the magnetic field in solar spicules. Methods. The equations that result from the application of the Weak Field Approximation (WFA) to the radiative transfer equations are used to infer the LOS component of the magnetic field (BLOS). Two restrictive conditions are imposed on the Stokes I and V profiles at each pixel before they can be used in a Bayesian inversion to compute its BLOS. Results. The LOS magnetic field component has been inferred in six data sets totalling 448 spectral scans in the Ca ii 8542 A line and containing both active region and quiet Sun areas, with values of hundreds of G being abundantly inferred. There seems to be no difference, from the statistical point of view, between the magnetic field strength of spicules in the quiet Sun or near an active region. On the other hand, the BLOS distributions present smaller values on the disk than off-limb, a fact that can be explained by the effect of superposition on the chromosphere of on-disk structures. We find that spicules in the vicinity of a sunspot have a magnetic field polarity (i.e. north or south) equal to that of the sunspot. This paper also contains an analysis of the effect of off-limb overlapping structures on the observed Stokes I and V parameters and the BLOS obtained from the WFA. It is found that this value is equal to or smaller than the largest LOS magnetic field components of the two structures. In addition, using random BLOS, Doppler velocities and line intensities of these two structures leads in ~ 50% of the cases to Stokes I and V parameters unsuitable to be used with the WFA. Conclusions. Our results present a scarcity of LOS magnetic field components smaller than some 50 G, which must not be taken as evidence against the existence of these magnetic field strengths in spicules.

Coronal rain consists of cool and dense plasma condensations formed in coronal loops as a result of thermal instability. Previous numerical simulations of thermal instability and coronal rain formation have relied on artificially adding a coronal heating term to the energy equation. To reproduce large-scale characteristics of the corona, using more realistic coronal heating prescription is necessary. We analyse coronal rain formation and evolution in a 3-dimensional radiative magnetohydrodynamic simulation spanning from convection zone to corona which is self-consistently heated by magnetic field braiding as a result of convective motions. We investigate the spatial and temporal evolution of energy dissipation along coronal loops which become thermally unstable. Ohmic dissipation in the model leads to the heating events capable of inducing sufficient chromospheric evaporation into the loop to trigger thermal instability and condensation formation. The cooling of the thermally unstable plasma occurs on timescales comparable to the duration of the individual impulsive heating events. The impulsive heating has sufficient duration to trigger thermal instability in the loop but does not last long enough to lead to coronal rain limit cycles. We show that condensations can either survive and fall into the chromosphere or be destroyed by strong bursts of Joule heating associated with a magnetic reconnection events. In addition, we find that condensations can also form along open magnetic field lines.

Coronal rain corresponds to cool and dense clumps in the corona accreting towards the solar surface, and is often observed above solar active regions. They are generally thought to be produced by thermal instability in the corona and their lifetime is limited by the time they take to reach the chromosphere. Although the rain usually fragments into smaller clumps while falling down, their specific spatial and temporal scales remain unclear. In addition, the observational signatures of the impact of the rain with the chromosphere have not been clarified yet. In this study, we investigate the time evolution of velocity and intensity of coronal rain above a sunspot by analyzing coronal images obtained by the AIA onboard the SDO satellite as well as the Slit-Jaw Images (SJIs) and spectral data taken by the IRIS satellite. We identify dark and bright threads moving towards the umbra in AIA images and in SJIs, respectively, and co-spatial chromospheric intensity enhancements and redshifts in three IRIS spectra, Mg II k 2796 Angstrom, Si IV 1394 Angstrom, and C II 1336 Angstrom. The intensity enhancements and coronal rain redshifts occur almost concurrently in all the three lines, which clearly demonstrates the causal relationship with coronal rain. Furthermore, we detect bursty intensity variation with a timescale shorter than 1 minute in Mg II k, Si IV and C II spectra, indicating that a length scale of rain clumps is about 2.7 Mm if we multiply the typical time scale of the busty intensity variation at 30 sec by the rain velocity at 90 $\mathrm{km\ s}^{-1}$. Such rapid enhancements in the IRIS lines are excited within a time lag of 5.6 sec limited by the temporal resolution. These temporal and spatial scales may reflect the physical processes responsible for the rain morphology, and are suggestive of instabilities such as Kelvin-Helmholtz.

Coronal rain is ubiquitous in flare loops, forming shortly after the onset of the solar flare. Rain is thought to be caused by a thermal instability, a localized runaway cooling of material in the corona. The models that demonstrate this require extremely long duration heating on the order of the radiative cooling time, localized near the footpoints of the loops. In flares, electron beams are thought to be the primary energy transport mechanism, driving strong footpoint heating during the impulsive phase that causes evaporation, filling and heating flare loops. Electron beams, however, do not act for a long period of time, and even supposing that they did, their heating would not remain localized at the footpoints. With a series of numerical experiments, we show directly that these two issues mean that electron beams are incapable of causing the formation of rain in flare loops. This result suggests that either there is another mechanism acting in flare loops responsible for rain, or that the modeling of the cooling of flare loops is somehow deficient. To adequately describe flares, the standard model must address this issue to account for the presence of coronal rain.

Thermal non-equilibrium (TNE) is a phenomenon that can occur in solar coronal loops when the heating is quasi-constant and highly-stratified. Under such heating conditions, coronal loops undergo cycles of evaporation and condensation. The recent observations of ubiquitous long-period intensity pulsations in coronal loops and their relationship with coronal rain have demonstrated that understanding the characteristics of TNE cycles is an essential step in constraining the circulation of mass and energy in the corona. We report unique observations with the Solar Dynamics Observatory (SDO) and the Swedish 1-m Solar Telescope (SST) that link the captured thermal properties across the extreme spatiotemporal scales covered by TNE processes. Within the same coronal loop bundle, we captured 6 hr period coronal intensity pulsations in SDO/AIA and coronal rain observed off-limb in the chromospheric Halpha and Ca II K spectral lines with SST/CRISP and SST/CHROMIS. We combined a multi-thermal analysis of the cycles with AIA and an extensive spectral characterisation of the rain clumps with the SST. We find clear evidence of evaporation-condensation cycles in the corona which are linked with periodic coronal rain showers. The high-resolution spectroscopic instruments at the SST reveal the fine-structured rain strands and allow us to probe the cooling phase of one of the cycles down to chromospheric temperatures. These observations reinforce the link between long-period intensity pulsations and coronal rain. They also demonstrate the capability of TNE to shape the dynamics of active regions on the large scales as well as on the smallest scales currently resolvable.

Aims. We investigate the transfer of energy between a standing kink mode and azimuthal Alfven waves within an expanding flux tube. We consider the process of resonant absorption in a loop with a non-uniform Alfven frequency profile but in the absence of a radial density gradient. Methods. Using the MHD code, Lare3d, we model an oscillating magnetic flux tube that expands radially with height. An initially straight loop structure with a magnetic field enhancement is relaxed towards a force-free state before a standing kink mode is introduced. Results. We demonstrate that the transverse gradient in Alfven frequency required for the existence of resonant field lines can be associated with the expansion of a high field-strength flux tube from concentrated flux patches. This allows for the conversion of energy between wave modes even in the absence of the density profile typically assumed in wave heating models. As with standing modes in straight flux tubes, small scales are dominated by the vorticity at the loop apex and by currents at the foot points. The azimuthal wave exhibits the structure of the expanded flux tube and is therefore associated with smaller length scales close to the foot points of the flux tube. Conclusions. Resonant absorption can proceed throughout the corona, even in the absence of dense loop structures. The flux tube and MHD waves considered are difficult to observe and our model highlights how estimating hidden wave power within the solar atmosphere can be problematic. We highlight that, for standing modes, the global properties of field lines are important for resonant absorption and coronal conditions at a single altitude will not fully determine the nature of MHD resonances. We provide a new model in partial response to the criticism that wave heating models cannot self-consistently generate or sustain the density profile upon which they typically rely.

The Multi-slit Solar Explorer (MUSE) is a proposed mission aimed at understanding the physical mechanisms driving the heating of the solar corona and the eruptions that are at the foundation of space weather. MUSE contains two instruments, a multi-slit EUV spectrograph and a context imager. It will simultaneously obtain EUV spectra (along 37 slits) and context images with the highest resolution in space (0.33-0.4 arcsec) and time (1-4 s) ever achieved for the transition region and corona. The MUSE science investigation will exploit major advances in numerical modeling, and observe at the spatial and temporal scales on which competing models make testable and distinguishable predictions, thereby leading to a breakthrough in our understanding of coronal heating and the drivers of space weather. By obtaining spectra in 4 bright EUV lines (Fe IX 171A, Fe XV 284A, Fe XIX-XXI 108A) covering a wide range of transition region and coronal temperatures along 37 slits simultaneously, MUSE will be able to "freeze" the evolution of the dynamic coronal plasma. We describe MUSE's multi-slit approach and show that the optimization of the design minimizes the impact of spectral lines from neighboring slits, generally allowing line parameters to be accurately determined. We also describe a Spectral Disambiguation Code to resolve multi-slit ambiguity in locations where secondary lines are bright. We use simulations of the corona and eruptions to perform validation tests and show that the multi-slit disambiguation approach allows accurate determination of MUSE observables in locations where significant multi-slit contamination occurs.

We report on a three-dimensional MHD numerical experiment of a small scale coronal mass ejection (CME) -like eruption propagating though a non-magnetized solar atmosphere. We find that the Kelvin-Helmholtz instability (KHI) develops at various but specific locations at the boundary layer between the erupting field and the background atmosphere, depending on the relative angle between the velocity and magnetic field. KHI develops at the front and at two of the four sides of the eruption. KHI is suppressed at the other two sides of the eruption. We also find the development of Alfv\'enic vortex shedding flows at the wake of the developing CME due to the 3D geometry of the field. Forward modeling reveals that the observational detectability of the KHI in solar eruptions is confined to a narrow $\approx10^{\circ}$ range when observing off-limb, and therefore its occurrence could be underestimated due to projection effects. The new findings can have significant implications for observations, for heating and for particle acceleration by turbulence from flow-driven instabilities associated with solar eruptions of all scales.

Some high-resolution observations have revealed that the active-region solar corona is filled with myriads of thin strands even in apparently uniform regions with no resolved loops. This fine structure can host collective oscillations involving a large portion of the corona due to the coupling of the motions of the neighbouring strands. We study these vibrations and the possible observational effects. Here we theoretically investigate the collective oscillations inherent to the fine structure of the corona. We have called them fundamental vibrations because they cannot exist in a uniform medium. We use the T-matrix technique to find the normal modes of random arrangements of parallel strands. We consider an increasing number of tubes to understand the vibrations of a huge number of tubes of a large portion of the corona. We additionally generate synthetic time-distance Doppler and line broadening diagrams of the vibrations of a coronal region to compare with observations. We have found that the fundamental vibrations are in the form of clusters of tubes where not all the tubes participate in the collective mode. The periods are distributed over a wide band of values. The width of the band increases with the number of strands but rapidly reaches an approximately constant value. The frequency band associated with the fine structure of the corona depends on the minimum separation between strands. We have found that the coupling between the strands is of large extent. The synthetic Dopplergrams and line-broadening maps show signatures of collective vibrations, not present in the case of purely random individual kink vibrations. We conclude that the fundamental vibrations of the corona can contribute to the energy budget of the corona and they may have an observational signature.

Recent observations with the Atmospheric Imaging Assembly (AIA) instrument on the SDO spacecraft have revealed the existence of decayless coronal kink oscillations. These transverse oscillations are not connected to any external phenomena like flares or coronal mass ejections, and show significantly lower amplitudes than the externally excited decaying oscillations. Numerical studies have managed to reproduce such decayless oscillations in the form of footpoint driven standing waves in coronal loops, and to treat them as a possible mechanism for wave heating of the solar corona. Our aim is to investigate the correlation between the observed amplitudes of the oscillations and input the energy flux from different drivers. We perform 3D MHD simulations in single, straight, density-enhanced coronal flux tubes for different drivers, in the presence of gravity. Synthetic images at different spectral lines are constructed with the use of the FoMo code. The development of the Kelvin-Helmholtz instability leads to mixing of plasma between the flux tube and the hot corona. Once the KHI is fully developed, the amplitudes of the decayless oscillations show only a weak correlation with the driver strength. We find that low amplitude decayless kink oscillations may correspond to significant energy fluxes of the order of the radiative losses for the Quiet Sun. A clear correlation between the input energy flux and the observed amplitudes from our synthetic imaging data cannot be established. Stronger drivers lead to higher vales of the line width estimated energy fluxes. Finally, estimations of the energy fluxes by spectroscopic data are affected by the LOS angle, favoring combined analysis of imaging and spectroscopic data for single oscillating loops.

MHD waves are ubiquitous in the solar corona where the highly structured magnetic fields provide efficient wave guides for their propagation. While MHD waves have been observed originating from lower layers of the solar atmosphere, recent studies have shown that some can be generated in-situ by the collision of dense counter propagating flows. In this theoretical study, we analyse the mechanism that triggers the propagation of kink and sausage modes in the solar corona, following the collision of counter-propagating flows and how the properties of the flows affect the properties of the generated waves. In order to study in detail such a mechanism we run a series of ideal 2D and 3D MHD simulations where we vary the properties of the counter-propagating flows and by means of a simple technique to estimate the amplitudes of the kink and sausage modes, we investigate their role on the generation and propagation of the MHD waves. We find that the amplitude of the waves is largely dependent on the kinetic energy of the flows and that the onset of kink or sausage modes depends on the asymmetries between the colliding blobs. Moreover, the initial wavelength of the MHD waves is associated with the magnetic configuration resulting from the collision of the flows. We also find that genuine 3D systems respond with smaller wave amplitudes. In this study, we present a parameter space description of the mechanism that leads to the generation of MHD waves from the collision of flows in the corona. Future observations of these waves can be used to understand the properties of the plasma and magnetic field of the solar corona.

Thermal non-equilibrium (TNE) is believed to be a potentially important process in understanding some properties of the magnetically closed solar corona. Through one-dimensional hydrodynamic models, this paper addresses the importance of the numerical spatial resolution, footpoint heating timescales and background heating on TNE. Inadequate transition region (TR) resolution can lead to significant discrepancies in TNE cycle behaviour, with TNE being suppressed in under-resolved loops. A convergence on the periodicity and plasma properties associated with TNE required spatial resolutions of less than 2 km for a loop of length 180 Mm. These numerical problems can be resolved using an approximate method that models the TR as a discontinuity using a jump condition, as proposed by Johnston et al. (2017a,b). The resolution requirements (and so computational cost) are greatly reduced while retaining good agreement with fully resolved results. Using this approximate method we (i) identify different regimes for the response of coronal loops to time-dependent footpoint heating including one where TNE does not arise and (ii) demonstrate that TNE in a loop with footpoint heating is suppressed unless the background heating is sufficiently small. The implications for the generality of TNE are discussed.

The signal measured by an astronomical spectrometer may be due to radiation from a multi-component mixture of plasmas with a range of physical properties (e.g. temperature, Doppler velocity). Confusion between multiple components may be exacerbated if the spectrometer sensor is illuminated by overlapping spectra dispersed from different slits, with each slit being exposed to radiation from a different portion of an extended astrophysical object. We use a compressed sensing method to robustly retrieve the different components. This method can be adopted for a variety of spectrometer configurations, including single-slit, multi-slit (e.g., the proposed MUlti-slit Solar Explorer mission; MUSE) and slot spectrometers (which produce overlappograms).

Recent numerical studies revealed that transverse motions of coronal loops can induce the Kelvin-Helmholtz Instability (KHI). This process could be important in coronal heating because it leads to dissipation of energy at small spatial-scale plasma interactions. Meanwhile, small amplitude decayless oscillations in coronal loops have been discovered recently in observations of SDO/AIA. We model such oscillations in coronal loops and study wave heating effects, considering a kink and Alfv{\'e}n driver separately and a mixed driver at the bottom of flux tubes. Both the transverse and Alfv{\'e}n oscillations can lead to the KHI. Meanwhile, the Alfv{\'e}n oscillations established in loops will experience phase mixing. Both processes will generate small spatial-scale structures, which can help the dissipation of wave energy. Indeed, we observe the increase of internal energy and temperature in loop regions. The heating is more pronounced for the simulation containing the mixed kink and Alfv{\'e}n driver. This means that the mixed wave modes can lead to a more efficient energy dissipation in the turbulent state of the plasma and that the KHI eddies act as an agent to dissipate energy in other wave modes. Furthermore, we also obtained forward modelling results using the FoMo code. We obtained forward models which are very similar to the observations of decayless oscillations. Due to the limited resolution of instruments, neither Alfv{\'e}n modes nor the fine structures are observable. Therefore, this numerical study shows that Alfv{\'e}n modes probably can co-exist with kink modes, leading to enhanced heating.

Broad differential emission measure (DEM) distributions in the corona are a sign of multi-thermal plasma along the line-of-sight. Traditionally, this is interpreted as evidence of multi-stranded loops. Recently, however, it has been shown that multi-stranded loops are unlikely to exist in the solar corona, because of their instability to transverse perturbations. We aim to test if loop models subject to the Transverse Wave-Induced Kelvin-Helmholtz (TWIKH) instability result in broad DEMs, potentially explaining the observations. We took simulation snapshots and compute the numerical DEM. Moreover, we performed forward-modelling in the relevant AIA channels before reconstructing the DEM. We find that turbulent loop models broaden their initial DEM, because of the turbulent mixing. The width of the DEM is determined by the initial temperature contrast with the exterior. We conclude that impulsively excited loop models have a rather narrow DEM, but that continuously driven models result in broad DEMs that are comparable to the observations.

Recent developments in the observation and modelling of kink oscillations of coronal loops have led to heightened interest over the last few years. The modification of the Transverse Density Profile (TDP) of oscillating coronal loops by non-linear effects, in particular the Kelvin-Helmholtz Instability (KHI), is investigated. How this evolution may be detected is established, in particular, when the KHI vortices may not be observed directly. A model for the loop's TDP is used which includes a finite inhomogeneous layer and homogeneous core, with a linear transition between them. The evolution of the loop's transverse intensity profile from numerical simulations of kink oscillations is analysed. Bayesian inference and forward modelling techniques are applied to infer the evolution of the TDP from the intensity profiles, in a manner which may be applied to observations. The strongest observational evidence for the development of the KHI is found to be a widening of the loop's inhomogeneous layer, which may be inferred for sufficiently well resolved loops, i.e $>$ 15 data points across the loop. The main signatures when observing the core of the loop (for this specific loop model) during the oscillation are: a widening inhomogeneous layer, decreasing intensity, an unchanged radius, and visible fine transverse structuring when the resolution is sufficient. The appearance of these signatures are delayed for loops with wider inhomogeneous layers, and quicker for loops oscillating at higher amplitudes. These cases should also result in stronger observational signatures, with visible transverse structuring appearing for wide loops observed at SDO/AIA resolution.

Transverse MHD waves permeate the solar atmosphere and are a candidate for coronal heating. However, the origin of these waves is still unclear. In this work, we analyse coordinated observations from \textit{Hinode}/SOT and \textit{IRIS} of a prominence/coronal rain loop-like structure at the limb of the Sun. Cool and dense downflows and upflows are observed along the structure. A collision between a downward and an upward flow with an estimated energy flux of $10^{7}-10^{8}$~erg~cm$^{-2}$~s$^{-1}$ is observed to generate oscillatory transverse perturbations of the strands with an estimated $\approx40~$km~s$^{-1}$ total amplitude, and a short-lived brightening event with the plasma temperature increasing to at least $10^{5}~$K. We interpret this response as sausage and kink transverse MHD waves based on 2D MHD simulations of plasma flow collision. The lengths, density and velocity differences between the colliding clumps and the strength of the magnetic field are major parameters defining the response to the collision. The presence of asymmetry between the clumps (angle of impact surface and/or offset of flowing axis) is crucial to generate a kink mode. Using the observed values we successfully reproduce the observed transverse perturbations and brightening, and show adiabatic heating to coronal temperatures. The numerical modelling indicates that the plasma $\beta$ in this loop-like structure is confined between $0.09$ and $0.36$. These results suggest that such collisions from counter-streaming flows can be a source of in-situ transverse MHD waves, and that for cool and dense prominence conditions such waves could have significant amplitudes.

In addition to their jet-like dynamic behaviour, spicules usually exhibit strong transverse speeds, multi-stranded structure and heating from chromospheric to transition region temperatures. In this work we first analyse \textit{Hinode} \& \textit{IRIS} observations of spicules and find different behaviours in terms of their Doppler velocity evolution and collective motion of their sub-structure. Some have a Doppler shift sign change that is rather fixed along the spicule axis, and lack coherence in the oscillatory motion of strand-like structure, matching rotation models or long wavelength torsional Alfv\'en waves. Others exhibit a Doppler shift sign change at maximum displacement and coherent motion of their strands, suggesting a collective MHD wave. By comparing with an idealised 3-D MHD simulation combined with radiative transfer modelling, we analyse the role of transverse MHD waves and associated instabilities in spicule-like features. We find that Transverse Wave Induced Kelvin-Helmholtz (TWIKH) rolls lead to coherence of strand-like structure in imaging and spectral maps, as seen in some observations. The rapid transverse dynamics and the density and temperature gradients at the spicule boundary lead to ring-shaped \ion{Mg}{2} k and \ion{Ca}{2} H source functions in the transverse cross-section, potentially allowing IRIS to capture the KHI dynamics. Twists and currents propagate along the spicule at Alfv\'enic speeds, and the temperature variations within TWIKH rolls produce sudden appearance / disappearance of strands seen in Doppler velocity and in \ion{Ca}{2} H intensity. However, only a mild intensity increase in higher temperature lines is obtained, suggesting there is an additional heating mechanism at work in spicules.

We report on the discovery of periodic coronal rain in an off-limb sequence of {\it Solar Dynamics Observatory}/Atmospheric Imaging Assembly images. The showers are co-spatial and in phase with periodic (6.6~hr) intensity pulsations of coronal loops of the sort described by Auchere et al. (2014) and Froment et al. (2015, 2017). These new observations make possible a unified description of both phenomena. Coronal rain and periodic intensity pulsations of loops are two manifestations of the same physical process: evaporation / condensation cycles resulting from a state of thermal nonequilibrium (TNE). The fluctuations around coronal temperatures produce the intensity pulsations of loops, and rain falls along their legs if thermal runaway cools the periodic condensations down and below transition-region (TR) temperatures. This scenario is in line with the predictions of numerical models of quasi-steadily and footpoint heated loops. The presence of coronal rain -- albeit non-periodic -- in several other structures within the studied field of view implies that this type of heating is at play on a large scale.

Aims: We quantify the effects of twisted magnetic fields on the development of the magnetic Kelvin-Helmholtz instability (KHI) in transversely oscillating coronal loops. Methods: We modelled a fundamental standing kink mode in a straight, density-enhanced magnetic flux tube using the magnetohydrodynamics code, Lare3d. In order to evaluate the impact of an azimuthal component of the magnetic field, various degrees of twist were included within the flux tube's magnetic field. Results: The process of resonant absorption is only weakly affected by the presence of a twisted magnetic field. However, the subsequent evolution of the KHI is sensitive to the strength of the azimuthal component of the field. Increased twist values inhibit the deformation of the loop's density profile, which is associated with the growth of the instability. Despite this, much smaller scales in the magnetic field are generated when there is a non-zero azimuthal component present. Hence, the instability is more energetic in cases with (even weakly) twisted fields. Field aligned flows at the loop apex are established in a twisted regime once the instability has formed. Conclusions: The KHI may have implications for wave heating in the solar atmosphere due to the creation of small length scales and the generation of a turbulent regime. Whilst magnetic twist does suppress the development of the vortices associated with the instability, the formation of the KHI in a twisted regime will be accompanied by greater Ohmic dissipation due to the larger currents that are produced, even if only weak twist is present. The presence of magnetic twist will likely make the instability more difficult to detect in the corona, but will enhance its contribution to heating the solar atmosphere.

Recent numerical studies of oscillating flux tubes have established the significance of resonant absorption in the damping of propagating transverse oscillations in coronal loops. The nonlinear nature of the mechanism has been examined alongside the Kelvin-Helmholtz instability, which is expected to manifest in the resonant layers at the edges of the flux tubes. While these two processes have been hypothesized to heat coronal loops through the dissipation of wave energy into smaller scales, the occurring mixing with the hotter surroundings can potentially hide this effect. We aim to study the effects of wave heating from driven and standing kink waves in a coronal loop. Using the MPI-AMRVAC code, we perform ideal, three dimensional magnetohydrodynamic (MHD) simulations of both (a) footpoint driven and (b) free standing oscillations in a straight coronal flux tube, in the presence of numerical resistivity. We have observed the development of Kelvin-Helmholtz eddies at the loop boundary layer of all three models considered here, as well as an increase of the volume averaged temperature inside the loop. The main heating mechanism in our setups was Ohmic dissipation, as indicated by the higher values for the temperatures and current densities located near the footpoints. The introduction of a temperature gradient between the inner tube and the surrounding plasma, suggests that the mixing of the two regions, in the case of hotter environment, greatly increases the temperature of the tube at the site of the strongest turbulence, beyond the contribution of the aforementioned wave heating mechanism.

Aims - Investigate the effects of resistivity and viscosity on the onset and growth of the Kelvin-Helmholtz instability (KHI) in an oscillating coronal loop. Methods - We modelled a standing kink wave in a density-enhanced loop with the three dimensional (3-D), resistive magnetohydrodynamics code, Lare3d. We conducted a parameter study on the viscosity and resistivity coefficients to examine the effects of dissipation on the KHI. Results - Enhancing the viscosity and resistivity acts to suppress the KHI. Larger values delay the formation of the instability and, in some cases, prevent the onset completely. This leads to the earlier onset of heating for smaller values of the transport coefficients. We note that viscosity has a greater effect on the development of the KHI than resistivity. Furthermore, when using anomalous resistivity, the Ohmic heating rate associated with the KHI may be greater than that associated with the phase mixing that occurs in an instability-suppressed regime (using uniform resistivity). Conclusions - From our study, it is clear that the heating rate crucially depends on the formation of small length scales (influenced by the numerical resolution) as well as the values of resistivity and viscosity. As larger values of the transport coefficients suppress the KHI, the onset of heating is delayed but the heating rate is larger. As increased numerical resolution allows smaller length scales to develop, the heating rate will be higher even for the same transport coefficients.

MHD waves permeate the solar atmosphere and constitute potential coronal heating agents. Yet, the waves detected so far may be but a small subset of the true existing wave power. Detection is limited by instrumental constraints, but also by wave processes that localise the wave power in undetectable spatial scales. In this study we conduct 3D MHD simulations and forward modelling of standing transverse MHD waves in coronal loops with uniform and non-uniform temperature variation in the perpendicular cross-section. The observed signatures are largely dominated by the combination of the Kelvin-Helmholtz instability (KHI), resonant absorption and phase mixing. In the presence of a cross-loop temperature gradient we find that emission lines sensitive to the loop core catch different signatures than those more sensitive to the loop boundary and the surrounding corona, leading to an out-of-phase intensity modulation produced by the KHI mixing. Common signatures to all considered models include an intensity and loop width modulation at half the kink period, fine strand-like structure, a characteristic arrow-shaped structure in the Doppler maps, overall line broadening in time but particularly at the loop edges. For our model, most of these features can be captured with a spatial resolution of $0.33\arcsec$ and spectral resolution of 25~km~s$^{-1}$, although severe over-estimation of the line width is obtained. Resonant absorption leads to a significant decrease of the observed kinetic energy from Doppler motions over time, which is not recovered by a corresponding increase in the line width from phase mixing and the KHI motions. We estimate this hidden wave energy to be a factor of $5-10$ of the observed value.

Flare-driven coronal rain can manifest from rapidly cooled plasma condensations near coronal loop-tops in thermally unstable post-flare arcades. We detect 5 phases that characterise the post-flare decay: heating, evaporation, conductive cooling dominance for ~120 s, radiative / enthalpy cooling dominance for ~4700 s and finally catastrophic cooling occurring within 35-124 s leading to rain strands with s periodicity of 55-70 s. We find an excellent agreement between the observations and model predictions of the dominant cooling timescales and the onset of catastrophic cooling. At the rain formation site we detect co-moving, multi-thermal rain clumps that undergo catastrophic cooling from ~1 MK to ~22000 K. During catastrophic cooling the plasma cools at a maximum rate of 22700 K s-1 in multiple loop-top sources. We calculated the density of the EUV plasma from the DEM of the multi-thermal source employing regularised inversion. Assuming a pressure balance, we estimate the density of the chromospheric component of rain to be 9.21x10^11 +-1.76x10^11 cm-3 which is comparable with quiescent coronal rain densities. With up to 8 parallel strands in the EUV loop cross section, we calculate the mass loss rate from the post-flare arcade to be as much as 1.98x10^12 +/-4.95x10^11 g s-1. Finally, we reveal a close proximity between the model predictions of 10^5.8 K and the observed properties between 10^5.9 K and 10^6.2 K, that defines the temperature onset of catastrophic cooling. The close correspondence between the observations and numerical models suggests that indeed acoustic waves (with a sound travel time of 68 s) could play an important role in redistributing energy and sustaining the enthalpy-based radiative cooling.

In the highly structured solar corona, resonant absorption is an unavoidable mechanism of energy transfer from global transverse MHD waves to local azimuthal Alfv\'en waves. Due to its localised nature, a direct detection of this mechanism is extremely difficult. Yet, it is the leading theory explaining the observed fast damping of the global transverse waves. However, at odds with this theoretical prediction, recent observations indicate that in the low amplitude regime such transverse MHD waves can also appear decay-less, a yet unsolved phenomenon. Recent numerical work has shown that Kelvin-Helmholtz instabilities (KHI) often accompany transverse MHD waves. In this work, we combine 3D MHD simulations and forward modelling to show that for currently achieved spatial resolution and observed small amplitudes, an apparent decay-less oscillation is obtained. This effect results from the combination of periodic brightenings produced by the KHI and the coherent motion of the KHI vortices amplified by resonant absorption. Such effect is especially clear in emission lines forming at temperatures that capture the boundary dynamics rather than the core, and reflects the low damping character of the local azimuthal Alfv\'en waves resonantly coupled to the kink mode. Due to phase mixing, the detected period can vary depending on the emission line, with those sensitive to the boundary having shorter periods than those sensitive to the loop core. This allows to estimate the density contrast at the boundary.

An observation from the Interface Region Imaging Spectrograph reveals coherent oscillations in the loops of an M1.6 flare on 2015 March 12. Both the intensity and Doppler shift of Fe~{\sc{xxi}}~1354.08\AA{}~show clear oscillations with a period of $\sim$25 seconds. Remarkably similar oscillations were also detected in the soft X-ray flux recorded by the Geostationary Operational Environmental Satellites (GOES). With an estimated phase speed of $\sim$2420~km~s$^{-1}$ and a derived electron density of at least 5.4$\times$10$^{10}$ cm$^{-3}$, the observed short-period oscillation is most likely the global fast sausage mode of a hot flare loop. We find a phase shift of $\sim$$\pi$/2 (1/4 period) between the Doppler shift oscillation and the intensity/GOES oscillations, which is consistent with a recent forward modeling study of the sausage mode. The observed oscillation requires a density contrast between the flare loop and coronal background of a factor $\geqslant$42. The estimated phase speed of the global mode provides an lower limit of the Alfv\'en speed outside the flare loop. We also find an increase of the oscillation period, which might be caused by the separation of the loop footpoints with time.

This document was created by the Solar Simulations for the Atacama Large Millimeter Observatory Network (SSALMON) in preparation of the first regular observations of the Sun with the Atacama Large Millimeter/submillimeter Array (ALMA), which are anticipated to start in ALMA Cycle 4 in October 2016. The science cases presented here demonstrate that a large number of scientifically highly interesting observations could be made already with the still limited solar observing modes foreseen for Cycle 4 and that ALMA has the potential to make important contributions to answering long-standing scientific questions in solar physics. With the proposal deadline for ALMA Cycle 4 in April 2016 and the Commissioning and Science Verification campaign in December 2015 in sight, several of the SSALMON Expert Teams composed strategic documents in which they outlined potential solar observations that could be feasible given the anticipated technical capabilities in Cycle 4. These documents have been combined and supplemented with an analysis, resulting in recommendations for solar observing with ALMA in Cycle 4. In addition, the detailed science cases also demonstrate the scientific priorities of the solar physics community and which capabilities are wanted for the next observing cycles. The work on this White Paper effort was coordinated in close cooperation with the two international solar ALMA development studies led by T. Bastian (NRAO, USA) and R. Brajsa, (ESO). This document will be further updated until the beginning of Cycle 4 in October 2016. In particular, we plan to adjust the technical capabilities of the solar observing modes once finally decided and to further demonstrate the feasibility and scientific potential of the included science cases by means of numerical simulations of the solar atmosphere and corresponding simulated ALMA observations.

The Atacama Large Millimeter/submillimeter Array (ALMA) is a new powerful tool for observing the Sun at high spatial, temporal, and spectral resolution. These capabilities can address a broad range of fundamental scientific questions in solar physics. The radiation observed by ALMA originates mostly from the chromosphere - a complex and dynamic region between the photosphere and corona, which plays a crucial role in the transport of energy and matter and, ultimately, the heating of the outer layers of the solar atmosphere. Based on first solar test observations, strategies for regular solar campaigns are currently being developed. State-of-the-art numerical simulations of the solar atmosphere and modeling of instrumental effects can help constrain and optimize future observing modes for ALMA. Here we present a short technical description of ALMA and an overview of past efforts and future possibilities for solar observations at submillimeter and millimeter wavelengths. In addition, selected numerical simulations and observations at other wavelengths demonstrate ALMA's scientific potential for studying the Sun for a large range of science cases.

Propagating perturbations have been observed in extended coronal loop structures for a number of years, but the interpretation in terms of slow (propagating) magneto-acoustic waves and/or as quasi-periodic upflows remains unresolved. We used forward-modelling to construct observational signatures associated with a simple slow magneto-acoustic wave or periodic flow model. Observational signatures were computed for the 171 {\AA} Fe ix and the 193 {\AA} Fe xii spectral lines. Although there are many differences between the flow and wave models, we did not find any clear, robust observational characteristics that can be used in isolation ( i.e. that do not rely on a comparison between the models). For the waves model, a relatively rapid change of the average line widths as a function of (shallow) line-of-sight angles was found, whereas the ratio of the line width amplitudes to the Doppler velocity amplitudes is relatively high for the flow model. The most robust observational signature found is that the ratio of the mean to the amplitudes of the Doppler velocity is always higher than one for the flow model. This ratio is substantially higher for flows than for waves, and for the flows model used in the study is exactly the same in the 171 {\AA} Fe ix and the 193 {\AA} Fe xii spectral lines. However, these potential observational signatures need to be treated cautiously because they are likely to be model-dependent.

Transverse magnetohydrodynamic (MHD) waves have been shown to be ubiquitous in the solar atmosphere and can in principle carry sufficient energy to generate and maintain the Sun's million-degree outer atmosphere or corona. However, direct evidence of the dissipation process of these waves and subsequent heating has not yet been directly observed. Here we report on high spatial, temporal, and spectral resolution observations of a solar prominence that show a compelling signature of so-called resonant absorption, a long hypothesized mechanism to efficiently convert and dissipate transverse wave energy into heat. Aside from coherence in the transverse direction, our observations show telltale phase differences around 180 degrees between transverse motions in the plane-of-sky and line-of-sight velocities of the oscillating fine structures or threads, and also suggest significant heating from chromospheric to higher temperatures. Comparison with advanced numerical simulations support a scenario in which transverse oscillations trigger a Kelvin-Helmholtz instability (KHI) at the boundaries of oscillating threads via resonant absorption. This instability leads to numerous thin current sheets in which wave energy is dissipated and plasma is heated. Our results provide direct evidence for wave-related heating in action, one of the candidate coronal heating mechanisms.

Transverse magnetohydrodynamic (MHD) waves are ubiquitous in the solar atmosphere and may be responsible for generating the Sun's million-degree outer atmosphere. However, direct evidence of the dissipation process and heating from these waves remains elusive. Through advanced numerical simulations combined with appropriate forward modeling of a prominence flux tube, we provide the observational signatures of transverse MHD waves in prominence plasmas. We show that these signatures are characterized by thread-like substructure, strong transverse dynamical coherence, an out-of-phase difference between plane-of-the-sky motions and LOS velocities, and enhanced line broadening and heating around most of the flux tube. A complex combination between resonant absorption and Kelvin-Helmholtz instabilities (KHI) takes place in which the KHI extracts the energy from the resonant layer and dissipates it through vortices and current sheets, which rapidly degenerate into turbulence. An inward enlargement of the boundary is produced in which the turbulent flows conserve the characteristic dynamics from the resonance, therefore guaranteeing detectability of the resonance imprints. We show that the features described in the accompanying paper (Okamoto et al. 2015) through coordinated Hinode and IRIS observations match well the numerical results.

Standing slow mode waves in hot flaring loops are exclusively observed in spectrometers and are used to diagnose the magnetic field strength and temperature of the loop structure. Due to the lack of spatial information, the longitudinal mode cannot be effectively identified. In this study, we simulate standing slow mode waves in flaring loops and compare the synthesized line emission properties with SUMER spectrographic and SDO/AIA imaging observations. We find that the emission intensity and line width oscillations are a quarter period out of phase with Doppler shift velocity both in time and spatial domain, which can be used to identify a standing slow mode wave from spectroscopic observations. However, the longitudinal overtones could be only measured with the assistance of imagers. We find emission intensity asymmetry in the positive and negative modulations, this is because the contribution function pertaining to the atomic emission process responds differently to positive and negative temperature variations. One may detect \textbf{half} periodicity close to the loop apex, where emission intensity modulation is relatively small. The line-of-sight projection affects the observation of Doppler shift significantly. A more accurate estimate of the amplitude of velocity perturbation is obtained by de-projecting the Doppler shift by a factor of $1-2\theta/\pi$ rather than the traditionally used $\cos\theta$. \textbf{If a loop is heated to the hotter wing, the intensity modulation could be overwhelmed by background emission, while the Doppler shift velocity could still be detected to a certain extent.

In this work, we analyse coordinated observations spanning chromospheric, TR and coronal temperatures at very high resolution which reveal essential characteristics of thermally unstable plasmas. Coronal rain is found to be a highly multi-thermal phenomenon with a high degree of co-spatiality in the multi-wavelength emission. EUV darkening and quasi-periodic intensity variations are found to be strongly correlated to coronal rain showers. Progressive cooling of coronal rain is observed, leading to a height dependence of the emission. A fast-slow two-step catastrophic cooling progression is found, which may reflect the transition to optically thick plasma states. The intermittent and clumpy appearance of coronal rain at coronal heights becomes more continuous and persistent at chromospheric heights just before impact, mainly due to a funnel effect from the observed expansion of the magnetic field. Strong density inhomogeneities on spatial scales of 0.2"-0.5" are found, in which TR to chromospheric temperature transition occurs at the lowest detectable scales. The shape of the distribution of coronal rain widths is found to be independent of temperature with peaks close to the resolution limit of each telescope, ranging from 0.2" to 0.8". However we find a sharp increase of clump numbers at the coolest wavelengths and especially at higher resolution, suggesting that the bulk of the rain distribution remains undetected. Rain clumps appear organised in strands in both chromospheric and TR temperatures, suggesting an important role of thermal instability in the shaping of fundamental loop substructure. We further find structure reminiscent of the MHD thermal mode. Rain core densities are estimated to vary between 2x10^{10} cm^{-3} and 2.5x10^{11} cm^{-3} leading to significant downward mass fluxes per loop of 1-5x10^{9} g s^{-1}, suggesting a major role in the chromosphere-corona mass cycle.

The Solar Simulations for the Atacama Large Millimeter Observatory Network (SSALMON) was initiated in 2014 in connection with two ALMA development studies. The Atacama Large Millimeter/submillimeter Array (ALMA) is a powerful new tool, which can also observe the Sun at high spatial, temporal, and spectral resolution. The international SSALMONetwork aims at coordinating the further development of solar observing modes for ALMA and at promoting scientific opportunities for solar physics with particular focus on numerical simulations, which can provide important constraints for the observing modes and can aid the interpretation of future observations. The radiation detected by ALMA originates mostly in the solar chromosphere - a complex and dynamic layer between the photosphere and corona, which plays an important role in the transport of energy and matter and the heating of the outer layers of the solar atmosphere. Potential targets include active regions, prominences, quiet Sun regions, flares. Here, we give a brief overview over the network and potential science cases for future solar observations with ALMA.

We have obtained H$\alpha$ high spatial and time resolution observations of the upper solar chromosphere and supplemented these with multi-wavelength observations from the Solar Dynamic Observatory (SDO) and the {\it Hinode} ExtremeUltraviolet Imaging Spectrometer (EIS). The H$\alpha$ observations were conducted on 11 February 2012 with the Hydrogen-Alpha Rapid Dynamics Camera (HARDcam) instrument at the National Solar Observatory's Dunn Solar Telescope. Our H$\alpha$ observations found large downflows of chromospheric material returning from coronal heights following a failed prominence eruption. We have detected several large condensations ("blobs") returning to the solar surface at velocities of $\approx$200 km s$^{-1}$ in both H$\alpha$ and several SDO AIA band passes. The average derived size of these "blobs" in H$\alpha$ is 500 by 3000 km$^2$ in the directions perpendicular and parallel to the direction of travel, respectively. A comparison of our "blob" widths to those found from coronal rain, indicate there are additional smaller, unresolved "blobs" in agreement with previous studies and recent numerical simulations. Our observed velocities and decelerations of the "blobs" in both H$\alpha$ and SDO bands are less than those expected for gravitational free-fall and imply additional magnetic or gas pressure impeding the flow. We derived a kinetic energy $\approx$2 orders of magnitude lower for the main eruption than a typical CME, which may explain its partial nature.

Spectroscopic observations of prominence eruptions associated with coronal mass ejections (CMEs), although relatively rare, can provide valuable plasma and 3D geometry diagnostics. We report the first observations by the Interface Region Imaging Spectrograph (IRIS) mission of a spectacular fast CME/prominence eruption associated with an equivalent X1.6 flare on 2014 May 9. The maximum plane-of-sky and Doppler velocities of the eruption are 1200 and 460 km/s, respectively. There are two eruption components separated by ~200 km/s in Doppler velocity: a primary, bright component and a secondary, faint component, suggesting a hollow, rather than solid, cone-shaped distribution of material. The eruption involves a left-handed helical structure undergoing counter-clockwise (viewed top-down) unwinding motion. There is a temporal evolution from upward eruption to downward fallback with less-than-free-fall speeds and decreasing nonthermal line widths. We find a wide range of Mg II k/h line intensity ratios (less than ~2 expected for optically-thin thermal emission): the lowest ever-reported median value of 1.17 found in the fallback material and a comparably high value of 1.63 in nearby coronal rain and intermediate values of 1.53 and 1.41 in the two eruption components. The fallback material exhibits a strong ($> 5 \sigma$) linear correlation between the k/h ratio and the Doppler velocity as well as the line intensity. We demonstrate that Doppler dimming of scattered chromospheric emission by the erupted material can potentially explain such characteristics.

New and advanced space-based observing facilities continue to lower the resolution limit and detect solar coronal loops in greater detail. We continue to discover even finer sub-structures within coronal loop cross sections, in order to understand the nature of the solar corona. Here, we push this lower limit further to search for the finest coronal loop sub-structures, through taking advantage of the resolving power of the Swedish 1- m Solar Telescope (SST) / CRisp Imaging Spectro-Polarimeter (CRISP), together with co-observations from the Solar Dynamics Observatory (SDO) / Atmospheric Image Assembly (AIA). High resolution imaging of the chromospheric H-alpha 656.28 nm spectral line core and wings can, under certain circumstances, allow one to deduce the topology of the local magnetic environment of the solar atmosphere where its observed. Here, we study post-flare coronal loops, which become filled with evaporated chromosphere that rapidly condenses into chromospheric clumps of plasma (detectable in H-alpha) known as a coronal rain, to investigate their fine-scale structure. We identify, through analysis of three datasets, large-scale catastrophic cooling in coronal loop-tops and the existence of multi-thermal, multi-stranded sub-structures. Many cool strands even extend fully-intact from loop-top to foot-point. We discover that coronal loop fine-scale strands can appear bunched with as many as 8 parallel strands, within an AIA coronal loop cross-section. The strand number density vs cross-sectional width distribution, as detected by CRISP within AIA-defined coronal loops, most-likely peaks at well below 100 km and currently 69% of the sub-structure strands are statistically unresolved in AIA coronal loops.

Prominences in the solar corona are hundredfold cooler and denser than their surroundings, with a total mass of 1.e13 up to 1.e15 g. Here we report on the first comprehensive simulations of three-dimensional, thermally and gravitationally stratified magnetic flux ropes, where in situ condensation to a prominence happens due to radiative losses. After a gradual thermodynamic adjustment, we witness a phase where runaway cooling happens while counter-streaming shearing flows drain off mass along helical field lines. After this drainage, a prominence-like condensation resides in concave upward field regions, and this prominence retains its overall characteristics for more than two hours. While condensing, the prominence establishes a prominence-corona transition region, where magnetic field-aligned thermal conduction is operative during the runaway cooling. The prominence structure represents a force-balanced state in a helical flux rope. The simulated condensation demonstrates a right-bearing barb, as a remnant of the drainage. Synthetic images at extreme ultraviolet wavelengths follow the onset of the condensation, and confirm the appearance of horns and a three-part structure for the stable prominence state, as often seen in erupting prominences. This naturally explains recent Solar Dynamics Observatory views with the Atmospheric Imaging Assembly on prominences in coronal cavities demonstrating horns.

IRIS data allow us to study the solar transition region (TR) with an unprecedented spatial resolution of 0.33 arcsec. On 2013 August 30, we observed bursts of high Doppler shifts suggesting strong supersonic downflows of up to 200 km/s and weaker, slightly slower upflows in the spectral lines Mg II h and k, C II 1336 \AA, Si IV 1394 \AA, and 1403 \AA, that are correlated with brightenings in the slitjaw images (SJIs). The bursty behavior lasts throughout the 2 hr observation, with average burst durations of about 20 s. The locations of these short-lived events appear to be the umbral and penumbral footpoints of EUV loops. Fast apparent downflows are observed along these loops in the SJIs and in AIA, suggesting that the loops are thermally unstable. We interpret the observations as cool material falling from coronal heights, and especially coronal rain produced along the thermally unstable loops, which leads to an increase of intensity at the loop footpoints, probably indicating an increase of density and temperature in the TR. The rain speeds are on the higher end of previously reported speeds for this phenomenon, and possibly higher than the free-fall velocity along the loops. On other observing days, similar bright dots are sometimes aligned into ribbons, resembling small flare ribbons. These observations provide a first insight into small-scale heating events in sunspots in the TR.

Current analytical and numerical modelling suggest the existence of ubiquitous thin current sheets in the corona that could explain the observed heating requirements. On the other hand, new high resolution observations of the corona indicate that its magnetic field may tend to organise itself in fine strand-like structures of few hundred kilometres widths. The link between small structure in models and the observed widths of strand-like structure several orders of magnitude larger is still not clear. A popular theoretical scenario is the nanoflare model, in which each strand is the product of an ensemble of heating events. Here, we suggest an alternative mechanism for strand generation. Through forward modelling of 3D MHD simulations we show that small amplitude transverse MHD waves can lead in a few periods time to strand-like structure in loops in EUV intensity images. Our model is based on previous numerical work showing that transverse MHD oscillations can lead to Kelvin-Helmholtz instabilities that deform the cross-sectional area of loops. While previous work has focused on large amplitude oscillations, here we show that the instability can occur even for low wave amplitudes for long and thin loops, matching those presently observed in the corona. We show that the vortices generated from the instability are velocity sheared regions with enhanced emissivity hosting current sheets. Strands result as a complex combination of the vortices and the line-of-sight angle, last for timescales of a period and can be observed for spatial resolutions of a tenth of loop radius.

Observations in the 171 AA channel of the Atmospheric Imaging Assembly of the space-borne Solar Dynamics Observatory show tornadoes-like features in the atmosphere of the Sun. These giant tornadoes appear as dark, elongated and apparently rotating structures in front of a brighter background. This phenomenon is thought to be produced by rotating magnetic field structures that extend throughout the atmosphere. We characterize giant tornadoes through a statistical analysis of properties like spatial distribution, lifetimes, and sizes. A total number of 201 giant tornadoes are detected in a period of 25 days, suggesting that on average about 30 events are present across the whole Sun at a time close to solar maximum. Most tornadoes appear in groups and seem to form the legs of prominences, thus serving as plasma sources/sinks. Additional Halpha observations with the Swedish 1-m Solar Telescope imply that giant tornadoes rotate as a structure although clearly exhibiting a thread-like structure. We observe tornado groups that grow prior to the eruption of the connected prominence. The rotation of the tornadoes may progressively twist the magnetic structure of the prominence until it becomes unstable and erupts. Finally, we investigate the potential relation of giant tornadoes to other phenomena, which may also be produced by rotating magnetic field structures. A comparison to cyclones, magnetic tornadoes and spicules implies that such events are more abundant and short-lived the smaller they are. This comparison might help to construct a power law for the effective atmospheric heating contribution as function of spatial scale.

Diagnostics of MHD waves in the solar atmosphere is a topic which often encounters problems of interpretation, due partly to the high complexity of the solar atmospheric medium. Forward modeling can significantly guide interpretation, bridging the gap between numerical simulations and observations, and increasing the reliability of mode identification for application of MHD seismology. In this work we aim at determining the characteristics of the fast MHD sausage mode in the corona on the modulation of observable quantities such as line intensity and spectral line broadening. Effects of line-of-sight angle, and spatial, temporal and spectral resolutions are considered. We take a cylindrical tube simulating a loop in a low-{\beta} coronal environment with an optically thin background, and let it oscillate with the fast sausage mode. A parametric study is performed. Among other results, we show that regardless of the ionisation state of the plasma, the variation of spectral line broadening can be significant, even for low intensity modulation. The nature of this broadening is not thermal but is mostly turbulent. This places spectrometers in clear advantage over imaging instruments for the detection of the sausage mode. The modulation of all quantities is considerably affected by the line-of-sight angle, and especially by the spatial and temporal resolution when these are on the order of the mode's wavelength and period. This places high constraints on instrumentation.

Small and elongated, cool and dense blob-like structures are being reported with high resolution telescopes in physically different regions throughout the solar atmosphere. Their detection and the understanding of their formation, morphology and thermodynamical characteristics can provide important information on their hosting environment, especially concerning the magnetic field, whose understanding constitutes a major problem in solar physics. An example of such blobs is coronal rain, a phenomenon of thermal non- equilibrium observed in active region loops, which consists of cool and dense chromospheric blobs falling along loop-like paths from coronal heights. So far, only off-limb coronal rain has been observed and few reports on the phenomenon exist. In the present work, several datasets of on-disk H{\alpha} observations with the CRisp Imaging SpectroPolarimeter (CRISP) at the Swedish 1-m Solar Telescope (SST) are analyzed. A special family of on-disk blobs is selected for each dataset and a statistical analysis is carried out on their dynamics, morphology and temperatures. All characteristics present distributions which are very similar to reported coronal rain statistics. We discuss possible interpretations considering other similar blob-like structures reported so far and show that a coronal rain interpretation is the most likely one. Their chromospheric nature and the projection effects (which eliminate all direct possibility of height estimation) on one side, and their small sizes, fast dynamics, and especially, their faint character (offering low contrast with the background intensity) on the other side, are found as the main causes for the absence until now of the detection of this on-disk coronal rain counterpart.

The tropical wisdom that when it is hot and dense we can expect rain might also apply to the Sun. Indeed, observations and numerical simulations have shown that strong heating at footpoints of loops, as is the case for active regions, puts their coronae out of thermal equilibrium, which can lead to a phenomenon known as catastrophic cooling. Following local pressure loss in the corona, hot plasma locally condenses in these loops and dramatically cools down to chromospheric temperatures. These blobs become bright in H-alpha and Ca II H in time scales of minutes, and their dynamics seem to be subject more to internal pressure changes in the loop rather than to gravity. They thus become trackers of the magnetic field, which results in the spectacular coronal rain that is observed falling down coronal loops. In this work we report on high resolution observations of coronal rain with the Solar Optical Telescope (SOT) on Hinode and CRISP at the Swedish Solar Telescope (SST). A statistical study is performed in which properties such as velocities and accelerations of coronal rain are derived. We show how this phenomenon can constitute a diagnostic tool for the internal physical conditions inside loops. Furthermore, we analyze transverse oscillations of strand-like condensations composing coronal rain falling in a loop, and discuss the possible nature of the wave. This points to the important role that coronal rain can play in the fields of coronal heating and coronal seismology.

We present here one of the first high resolution spectroscopic observations of coronal rain, performed with the CRISP instrument at the Swedish Solar Telescope. This work constitutes the first attempt to assess the importance of coronal rain in the understanding of the coronal magnetic field in active regions. A large statistical set is obtained in which dynamics (total velocities and accelerations), shapes (lengths and widths), trajectories (angles of fall) and thermodynamic properties (temperatures) of the condensations are derived. Specifically, we find that coronal rain is composed of small and dense chromospheric cores with average widths and lengths of 310 km and 710 km respectively, average temperatures below 7000 K, displaying a broad distribution of falling speeds with an average of 70 km/s and accelerations largely below the effective gravity along loops. Through estimates of the ion-neutral coupling in the blobs we show that coronal rain acts as a tracer of the coronal magnetic field, thus supporting the multi-strand loop scenario, and acts as a probe of the local thermodynamic conditions in loops. We further find that the cooling in neighboring strands occurs simultaneously in general suggesting a similar thermodynamic evolution among strands, which can be explained by a common footpoint heating process. Constraints for coronal heating models of loops are thus provided. Estimates of the fraction of coronal volume with coronal rain give values between 7% and 30%. Estimates of the occurrence time of the phenomenon in loops set times between 5 and 20 hours, implying that coronal rain may be a common phenomenon, in agreement with the frequent observations of cool downflows in EUV lines. The coronal mass drain rate in the form of coronal rain is estimated to be on the order of 5x10^9 g/s, a significant quantity compared to the estimate of mass flux into the corona from spicules.

The condensations composing coronal rain, falling down along loop-like structures observed in cool chromospheric lines such as H$\alpha$ and \ion{Ca}{2} H, have long been a spectacular phenomenon of the solar corona. However, considered a peculiar sporadic phenomenon, it has not received much attention. This picture is rapidly changing due to recent high resolution observations with instruments such as \textit{Hinode}/SOT, CRISP of \textit{SST} and \textit{SDO}. Furthermore, numerical simulations have shown that coronal rain is a loss of thermal equilibrium of loops linked to footpoint heating. This result has highlighted the importance that coronal rain can play in the field of coronal heating. In this work, we further stress the importance of coronal rain by showing the role it can play in the understanding of the coronal magnetic field topology. We analyze \textit{Hinode}/SOT observations in the \ion{Ca}{2} H line of a loop in which coronal rain puts in evidence in-phase transverse oscillations of multiple strand-like structures. The periods, amplitudes, transverse velocities and phase velocities are calculated, allowing an estimation of the energy flux of the wave and the coronal magnetic field inside the loop through means of coronal seismology. We discuss the possible interpretations of the wave as either standing or propagating torsional Alfv\'en or fast kink waves. An estimate of the plasma beta parameter of the condensations indicates a condition that may allow the often observed separation and elongation processes of the condensations. We also show that the wave pressure from the transverse wave can be responsible for the observed low downward acceleration of coronal rain.

Reported observations in H-alpha, Ca II H and K or or other chromospheric lines of coronal rain trace back to the days of the Skylab mission. Offering a high contrast in intensity with respect to the background (either bright in emission if observed at the limb, or dark in absorption if observed on disk) these cool blobs are often observed falling down from high coronal heights above active regions. A physical explanation for this spectacular phenomenon has been put forward thanks to numerical simulations of loops with footpoint concentrated heating, a heating scenario in which cool condensations naturally form in the corona. This effect has been termed 'catastrophic cooling' and is the predominant explanation for coronal rain. In this work we further investigate the link between this phenomenon and the heating mechanisms acting in the corona. We start by analyzing observations of coronal rain at the limb in the Ca II H line performed by the SOT instrument on board of the Hinode satellite. We then compare the observations with 1.5-dimensional MHD simulations of loops being heated by small-scale discrete events concentrated towards the footpoints (that could come, for instance, from magnetic reconnection events), and by Alfven waves generated at the photosphere. It is found that if a loop is heated predominantly from Alfven waves coronal rain is inhibited due to the characteristic uniform heating they produce. Hence coronal rain may not only point to the spatial distribution of the heating in coronal loops but also to the agent of the heating itself. We thus propose coronal rain as a marker for coronal heating mechanisms.

In the context of coronal heating, among the zoo of MHD waves that exist in the solar atmosphere, Alfven waves receive special attention. Indeed, these waves constitute an attractive heating agent due to their ability to carry over the many different layers of the solar atmosphere sufficient energy to heat and maintain a corona. However, due to their incompressible nature these waves need a mechanism such as mode conversion (leading to shock heating), phase mixing, resonant absorption or turbulent cascade in order to heat the plasma. New observations with polarimetric, spectroscopic and imaging instruments such as those on board of the japanese satellite Hinode, or the SST or CoMP, are bringing strong evidence for the existence of energetic Alfven waves in the solar corona. In order to assess the role of Alfven waves in coronal heating, in this work we model a magnetic flux tube being subject to Alfven wave heating through the mode conversion mechanism. Using a 1.5-dimensional MHD code we carry out a parameter survey varying the magnetic flux tube geometry (length and expansion), the photospheric magnetic field, the photospheric velocity amplitudes and the nature of the waves (monochromatic or white noise spectrum). It is found that independently of the photospheric wave amplitude and magnetic field a corona can be produced and maintained only for long (> 80 Mm) and thick (area ratio between photosphere and corona > 500) loops. Above a critical value of the photospheric velocity amplitude (generally a few km/s) the corona can no longer be maintained over extended periods of time and collapses due to the large momentum of the waves. These results establish several constraints on Alfven wave heating as a coronal heating mechanism, especially for active region loops.

Alfven waves created by sub-photospheric motions or by magnetic reconnection in the low solar atmosphere seem good candidates for coronal heating. However, the corona is also likely to be heated more directly by magnetic reconnection, with dissipation taking place in current sheets. Distinguishing observationally between these two heating mechanisms is an extremely difficult task. We perform 1.5-dimensional MHD simulations of a coronal loop subject to each type of heating and derive observational quantities that may allow these to be differentiated.