Having completed its commissioning phase, the Advanced Rayleigh guided Ground-layer adaptive Optics System (ARGOS) facility is coming online for scientific observations at the Large Binocular Telescope (LBT). With six Rayleigh laser guide stars in two constellations and the corresponding wavefront sensing, ARGOS corrects the ground-layer distortions for both LBT 8.4m eyes with their adaptive secondary mirrors. Under regular observing conditions, this set-up delivers a point spread function (PSF) size reduction by a factor of ~2--3 compared to a seeing-limited operation. With the two LUCI infrared imaging and multi-object spectroscopy instruments receiving the corrected images, observations in the near-infrared can be performed at high spatial and spectral resolution. We discuss the final ARGOS technical set-up and the adaptive optics performance. We show that imaging cases with ground-layer adaptive optics (GLAO) are enhancing several scientific programmes, from cluster colour magnitude diagrams and Milky Way embedded star formation, to nuclei of nearby galaxies or extragalactic lensing fields. In the unique combination of ARGOS with the multi-object near-infrared spectroscopy available in LUCI over a 4x4 arcmin field of view, the first scientific observations have been performed on local and high-z objects. Those high spatial and spectral resolution observations demonstrate the capabilities now at hand with ARGOS at the LBT.

High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a large gain in mission efficiency. The combined measurements reliably identify potentially habitable planets in multiple systems with a few observations, while astrometry or imaging alone would require many measurements over a long time baseline. In addition, the combined measurement allows direct determination of stellar masses to percent-level accuracy, using planets as test particles. We also show that the DPT maintains the full sensitivity of the telescope for deep wide-field imaging, and is therefore compatible with simultaneous scientific observations unrelated to exoplanets. We conclude that astrometry, coronagraphy, and deep wide-field imaging can be performed simultaneously on a single telescope without significant negative impact on the performance of any of the three techniques.

Astrometric detection and mass determination of Earth-mass exoplanets requires sub-microarcsec accuracy, which is theoretically possible with an imaging space telescope using field stars as an astrometric reference. The measurement must however overcome astrometric distortions which are much larger than the photon noise limit. To address this issue, we propose to generate faint stellar diffraction spikes using a two-dimensional grid of regularly spaced small dark spots added to the surface of the primary mirror (PM). Accurate astrometric motion of the host star is obtained by comparing the position of the spikes to the background field stars. The spikes do not contribute to scattered light in the central part of the field and therefore allow unperturbed coronagraphic observation of the star's immediate surrounding. Because the diffraction spikes are created on the PM and imaged on the same focal plane detector as the background stars, astrometric distortions affect equally the diffraction spikes and the background stars, and are therefore calibrated. We describe the technique, detail how the data collected by the wide-field camera are used to derive astrometric motion, and identify the main sources of astrometric error using numerical simulations and analytical derivations. We find that the 1.4 m diameter telescope, 0.3 sq.deg field we adopt as a baseline design achieves 0.2 microarcsec single measurement astrometric accuracy. The diffractive pupil concept thus enables sub-microarcsec astrometry without relying on the accurate pointing, external metrology or high stability hardware required with previously proposed high precision astrometry concepts.

The Terrestrial Planet Finder Coronagraph (TPF-C) mission presented here is an existence proof for a flagship-class internal coronagraph space mission capable of detecting and characterizing Earth-like planets and planetary systems at visible wavelengths around nearby stars, using an existing launch vehicle. TPF-C will use spectroscopy to measure key properties of exoplanets including the presence of atmospheric water or oxygen, powerful signatures in the search for habitable worlds.

High contrast coronagraphic imaging of the immediate surrounding of stars requires exquisite control of low-order wavefront aberrations, such as tip-tilt (pointing) and focus. We propose an accurate, efficient and easy to implement technique to measure such aberrations in coronagraphs which use a focal plane mask to block starlight. The Coronagraphic Low Order Wavefront Sensor (CLOWFS) produces a defocused image of a reflective focal plane ring to measure low order aberrations. Even for small levels of wavefront aberration, the proposed scheme produces large intensity signals which can be easily measured, and therefore does not require highly accurate calibration of either the detector or optical elements. The CLOWFS achieves nearly optimal sensitivity and is immune from non-common path errors. This technique is especially well suited for high performance low inner working angle (IWA) coronagraphs. On phase-induced amplitude apodization (PIAA) type coronagraphs, it can unambiguously recover aberrations which originate from either side of the beam shaping introduced by the PIAA optics. We show that the proposed CLOWFS can measure sub-milliarcsecond telescope pointing errors several orders of magnitude faster than would be possible in the coronagraphic science focal plane alone, and can also accurately calibrate residual coronagraphic leaks due to residual low order aberrations. We have demonstrated 1e-3 lambda/D pointing stability in a laboratory demonstration of the CLOWFS on a PIAA type coronagraph.

The detection of lower mass planets now being reported via radial velocity and microlensing surveys suggests that they may be ubiquitous. If missions such as Kepler are able to confirm this, the detection and study of rocky planets via direct imaging with ground-based telescopes of apertures > 20 m is feasible in the thermal infrared. We discuss two cases for detecting rocky planets, the first via detection of molten Earths formed though an Earth-Moon like impact event, and the second via detection of planets around very nearby stars. These observations have the potential to give us a first look at a rocky planet similar to the Earth.

We have studied the feasibility and scientific potential of zenith observing liquid mirror telescopes having 20 to 100 m diameters located on the moon. They would carry out deep infrared surveys to study the distant universe and follow up discoveries made with the 6 m James Webb Space Telescope (JWST), with more detailed images and spectroscopic studies. They could detect objects 100 times fainter than JWST, observing the first, high-red shift stars in the early universe and their assembly into galaxies. We explored the scientific opportunities, key technologies and optimum location of such telescopes. We have demonstrated critical technologies. For example, the primary mirror would necessitate a high-reflectivity liquid that does not evaporate in the lunar vacuum and remains liquid at less than 100K: We have made a crucial demonstration by successfully coating an ionic liquid that has negligible vapor pressure. We also successfully experimented with a liquid mirror spinning on a superconducting bearing, as will be needed for the cryogenic, vacuum environment of the telescope. We have investigated issues related to lunar locations, concluding that locations within a few km of a pole are ideal for deep sky cover and long integration times. We have located ridges and crater rims within 0.5 degrees of the North Pole that are illuminated for at least some sun angles during lunar winter, providing power and temperature control. We also have identified potential problems, like lunar dust. Issues raised by our preliminary study demand additional in-depth analyses. These issues must be fully examined as part of a scientific debate we hope to start with the present article.

Extra-solar planets have not been imaged directly with existing ground or space telescopes because they are too faint to be seen against the halo of the nearby bright star. Most techniques being explored to suppress the halo are achromatic, with separate correction of diffraction and wavefront errors. Residual speckle structure may be subtracted by differencing images taken through narrowband filters, but photon noise remains and ultimately limits sensitivity. Here we describe two ways to take advantage of narrow bands to reduce speckle photon flux and to obtain better control of systematic errors. Multiple images are formed in separate color bands of 5-10% bandwidth, and recorded by coronagraphic interferometers equipped with active control of wavefront phase and/or amplitude. In one method, a single deformable pupil mirror is used to actively correct both diffraction and wavefront components of the halo. This yields good diffraction suppression for complex pupil obscuration, with high throughput over half the focal plane. In a second method, the coronagraphic interferometer is used as a second stage after conventional apodization. The halo from uncontrollable residual errors in the pupil mask or wavefront is removed by destructive interference made directly at the detector focal plane with an "anti-halo", synthesized by spatial light modulators in the reference arm of the interferometer. In this way very deep suppression may be achieved by control elements with greatly relaxed, and thus achievable, tolerances. In both examples, systematic errors are minimized because the planet imaging cameras themselves also provide the error sensing data.

We utilized the MMT's unique deformable secondary adaptive optics system to produce high-resolution (FWHM=0.3"), very high Strehl mid-infrared (9.8, 11.7 & 18 micron) images of the post-AGB star AC Her. The very high (98+/-2%) Strehls achieved with Mid-IR AO led naturally to an ultra-stable PSF independent of airmass, seeing, or location on the sky. We find no significant difference between AC Her's morphology and our unresolved PSF calibration stars (mu UMa & alpha Her) at 9.8, 11.7, & 18 microns. Our current observations do not confirm any extended Mid-IR structure around AC Her. These observations are in conflict with previously reported Keck (seeing-limited) 11.7 and 18 micron images which suggested the presence of a resolved ~0.6" edge-on circumbinary disk. We conclude that AC Her has no extended Mid-IR structure on scales greater than 0.2" (R<75 AU). These first results of Mid-IR AO science are very encouraging for future high accuracy Mid-IR imaging with this technique.

We present the first scientific images obtained with a deformable secondary mirror adaptive optics system. We utilized the 6.5m MMT AO system to produce high-resolution (FWHM=0.07'') near infrared (1.6 um) images of the young (~1 Myr) Orion Trapezium theta 1 Ori cluster members. A combination of high spatial resolution and high signal to noise allowed the positions of these stars to be measured to within ~0.003'' accuracies. Including previous speckle data (Weigelt et al. 1999), we analyze a six year baseline of high-resolution observations of this cluster. Over this baseline we are sensitive to relative proper motions of only ~0.002''/yr (4.2 km/s at 450 pc). At such sensitivities we detect orbital motion in the very tight theta 1 Ori B2B3 (52 AU separation) and theta 1 Ori A1A2 (94 AU separation) systems. Such motions are consistent with those independently observed by Schertl et al. (2003) with speckle interferometry, giving us confidence that these very small (~0.002''/yr) orbital motions are real. All five members of the theta 1 Ori B system appear likely gravitationally bound. The very lowest mass member of the theta 1 Ori B system (B4) has K' ~11.66 and an estimated mass of ~0.2 Msun. There was very little motion (4+/-15 km/s) detected of B4 w.r.t B1 or B2, hence B4 is possibly part of the theta 1 Ori B group. We suspect that if this very low mass member is physically associated it most likely is in an unstable (non-hierarchical) orbital position and will soon be ejected from the group. The theta 1 Ori B system appears to be a good example of a star formation ``mini-cluster'' which may eject the lowest mass members of the cluster in the near future. This ``ejection'' process could play a major role in the formation of low mass stars and brown dwarfs.

The nearby late M star Gliese 569B was recently found by adaptive optics imaging to be a double with separation ~1 AU. To explore the orbital motion and masses, we have undertaken a high resolution (~0.05 arcsec) astrometric study. Images were obtained over 1.5 years with bispectrum speckle interferometry at the 6.5m MMT and 6m SAO telescopes. Our data show motion corresponding to more than half the orbital period, and constrain the total mass to be > 0.115 M_solar, with a most probable value of 0.145 M_solar. Higher masses cannot be excluded without more extended observations, but from statistical analysis we find an 80% probability that the total mass is less than 0.21 M_solar. An infrared spectrum of the blended B double obtained with the MMT has been modeled as a blend of two different spectral types, chosen to be consistent with the measured J and K band brightness difference of a factor ~2. The blended fit is not nearly as good as that to a pure M8.5+ template. Therefore we hypothesize that the brighter component likely has two unresolved components with near equal masses, each the same as the fainter component. If Gl 569B is a triple our dynamical limits suggest each component has a mass of 50 (+23/-4) M_jupiter. We infer an age for the system of 300 Myr, from its kinematic motion which places its as a member of the Ursa Major moving group. All the above parameters are consistent with the latest DUSTY evolutiuon models for brown dwarfs.

The lightweighting and surface accuracy targeted for NGST's 8 m primary mirror has been demonstrated in a 0.5 m prototype. Now a second, 2 m prototype weighing 40 kg in total is being fabricated at the University of Arizona under the NGST NMSD program. It will be tested in cryogenic operation in spring 1999. A third, advanced mirror system demonstrator (AMSD) is needed, the full size of an NGST segment, for flight qualification, including launch survival and extremely high reliability. The 3.5 m mirror, 1/6 the weight of HST's primary, would be made with a 2 mm thick glass face-sheet attached by adjustable screws to a carbon composite support. It would be figured as a fast telescope primary, and fully tested cryogenically to verify closed loop figure stability with simulated infrared starlight. If started in early 1999, this could be completed in 2001. Construction of the NGST mirror panels could then be undertaken on the basis of proven technology, and in time for a 2007 launch. With a diameter of 3.5 m and a weight of only 140 kg, the mirror could be incorporated into a telescope and launched to a high orbit by the Shuttle or number of other vehicles. Such a space mission would complement those already planned for scaled down tests of the unfolding of the NGST mirror segments (NEXUS) and the sunshade (ISIS). Much would be learned by running the mirror at cryogenic temperature, with a new infrared array to make preliminary observations in the 2 - 4 microns dark sky window, and a CCD to check optical image quality. This mission would be independent of the NGST, but would lay the scientific groundwork for the much more powerful telescope, as well as giving practical experience of mirror operation.

We have done theoretical calculations and simulations for infrared spectroscopy at the MMT 6.5 m with laser guide star AO, which provides almost full sky coverage. The results show we can expect 40-60% of the photons from a unresolved source within 0.2 arcsec diameter circle for J, H, K, L and M bands under typical atmospheric seeing condition at 2.2 micron. Therefore, the spectrograph entrance slit size should match the 0.2 arcsec image to obtain high throughput. Higher resolution can be achieved by narrowing down the slit size to match the diffraction-limited image core size of about 0.1 arcsec in the infrared. However, the throughput will be correspondingly reduced by a factor of two. Due to the limited atmospheric isoplanatic angle in the J, H and K bands, the encircled photon percentage within 0.2 arcsec diameter drops from 40-60% when the object is at the laser pointing direction to 20-40% when the object is about 30 arcsec away from the laser direction. Therefore, the useful field of view for AO multiple object spectroscopy is about 60 arcsec. Further studies of IR background (sky and thermal) and IR detector performance show that spectral resolution of R = 2,000 can take full advantage of AO images without much penalty due to the dark current of the IR detector and IR OH sky emission lines. We have also studied natural guide star AO spectroscopy. More details are in the paper.