The ROOT based Offline and Online Analysis (ROAn) framework was developed to perform data analysis on data from Depleted P-channel Field Effect Transistor (DePFET) detectors, a type of active pixel sensors developed at the MPI Halbleiterlabor (HLL). ROAn is highly flexible and extensible, thanks to ROOT's features like run-time type information and reflection. ROAn provides an analysis program which allows to perform configurable step-by-step analysis on arbitrary data, an associated suite of algorithms focused on DePFET data analysis, and a viewer program for displaying and processing online or offline detector data streams. The analysis program encapsulates the applied algorithms in objects called steps which produce analysis results. The dependency between results and thus the order of calculation is resolved automatically by the program. To optimize algorithms for studying detector effects, analysis parameters are often changed. Such changes of input parameters are detected in subsequent analysis runs and only the necessary recalculations are triggered. This saves time and simultaneously keeps the results consistent. The viewer program offers a configurable Graphical User Interface (GUI) and process chain, which allows the user to adapt the program to different tasks such as offline viewing of file data, online monitoring of running detector systems, or performing online data analysis (histogramming, calibration, etc.). Because of its modular design, ROAn can be extended easily, e.g. be adapted to new detector types and analysis processes.

The Wide Field Imager (WFI) is one of the two scientific instruments proposed for the Athena+ X-ray observatory. It will provide imaging in the 0.1-15 keV band over a wide field, simultaneously with spectrally and time-resolved photon counting. The instrument is designed to make optimal use of the grasp (collecting area times solid angle product) provided by the optical design of the Athena+ mirror system (Willingale et al. 2013), by combining a sensitive approx. 40' diameter field of view (baseline; 50' goal) DEPFET detector with a pixel size properly sampling the angular resolution of 5 arc sec on-axis (half energy width).This synthesis makes the WFI a very powerful survey instrument, significantly surpassing currently existing capabilities (Nandra et al. 2013; Aird et al. 2013). In addition, the WFI will provide unprecedented simultaneous high-time resolution and high count rate capabilities for the observation of bright sources with low pile-up and high efficiency. In this paper, we summarize the instrument design, the status of the technology development, and the baseline performance.

We report on the design, production, and testing of advanced double-sided silicon strip detectors under development at the Max-Planck-Institute as part of the Medium Energy Gamma-ray Astronomy (MEGA) project. The detectors are designed to form a stack, the "tracker," with the goal of recording the paths of energetic electrons produced by Compton-scatter and pair-production interactions. Each layer of the tracker is composed of a 3 x 3 array of 500 micron thick silicon wafers, each 6 cm x 6 cm and fitted with 128 orthogonal p and n strips on opposite sides (470 micron pitch). The strips are biased using the punch-through principle and AC-coupled via metal strips separated from the strip implant by an insulating oxide/nitride layer. The strips from adjacent wafers in the 3 x 3 array are wire-bonded in series and read out by 128-channel TA1.1 ASICs, creating a total 19 cm x 19 cm position-sensitive area. At 20 degrees C a typical energy resolution of 15-20 keV FWHM, a position resolution of 290 microns, and a time resolution of ~1 microsec is observed.

The goal of the Medium Energy Gamma-ray Astronomy (MEGA) telescope is to improve sensitivity at medium gamma-ray energies (0.4-50 MeV) by at least an order of magnitude over that of COMPTEL. This will be achieved with a new compact design that allows for a very wide field of view, permitting a sensitive all-sky survey and the monitoring of transient and variable sources. The key science objectives for MEGA include the investigation of cosmic high-energy particle accelerators, studies of nucleosynthesis sites using gamma-ray lines, and determination of the large-scale structure of galactic and cosmic diffuse background emission. MEGA records and images gamma-ray events by completely tracking both Compton and pair creation interactions in a tracker of double-sided silicon strip detectors and a calorimeter of CsI crystals able to resolve in three dimensions. We present initial laboratory calibration results from a small prototype MEGA telescope.