The effects of both elliptical shape and stage of emergence of the coronal loop on the resonant absorption of standing kink oscillations are studied. To do so, a typical coronal loop is modeled as a zero-beta longitudinally stratified cylindrical magnetic flux tube. We developed the connection formulae for the resonant absorption of standing transversal oscillations of a coronal loop with an elliptical shape, at various stages of its emergence. Using the connection formulae, the dispersion relation is derived and solved numerically to obtain the frequencies and damping rates of the fundamental and first-overtone kink modes. Our numerical results show that both the elliptical shape and stage of emergence of the loop alter the frequencies and damping rates of the tube as well as the ratio of frequencies of the fundamental and its first-overtone modes. However, the ratio of the oscillation frequency to the damping rate is not affected by the tube shape and stage of its emergence and also is independent of the density stratification parameter.

We report the design and development of a self-contained multi-band receiver (MBR) system, intended for use with a single large aperture to facilitate sensitive & high time-resolution observations simultaneously in 10 discrete frequency bands sampling a wide spectral span (100-1500 MHz) in a nearly log-periodic fashion. The development of this system was primarily motivated by need for tomographic studies of pulsar polar emission regions. Although the system design is optimized for the primary goal, it is also suited for several other interesting astronomical investigations. The system consists of a dual-polarization multi-band feed (with discrete responses corresponding to the 10 bands pre-selected as relatively RFI-free), a common wide-band RF front-end, and independent back-end receiver chains for the 10 individual sub-bands. The raw voltage time-sequences corresponding to 16 MHz bandwidth each for the two linear polarization channels and the 10 bands, are recorded at the Nyquist rate simultaneously. We present the preliminary results from the tests and pulsar observations carried out with the Green Bank Telescope using this receiver. The system performance implied by these results, and possible improvements are also briefly discussed.

Broadband antenna feeds are of particular interest to existing and future radio telescopes for multi-frequency studies of astronomical sources. Although a 1:15 range in frequency is difficult to achieve, the well-known Eleven feed design offers a relatively uniform response over such a range, and reasonably well-matched responses in E & H planes. However, given the severe Radio Frequency Interference in several bands over such wide spectral range, one desires to selectively reject the corresponding bands. With this view, we have explored the possibilities of having a multi-band feed antenna spanning a wide frequency range, but which would have good response only in a number of pre-selected (relatively) RFI-free windows (for a particular telescope-site). The designs we have investigated use the basic configuration of pairs of dipoles as in the Eleven feed, but use simple wire dipoles instead of folded dipoles used in the latter. From our study of the two designs we have investigated, we find that the design with feed-lines constructed using co-axial lines shows good rejection in the unwanted parts of the spectrum and control over the locations of resonant bands.

The standing quasi-modes of the ideal MHD in a zero-$\beta$ cylindrical magnetic flux tube that undergoes a longitudinal density stratification and radial density structuring is considered. The radial structuring is assumed to be a linearly varying density profile. Using the relevant connection formulae of the resonant absorption, the dispersion relation for the fast MHD body waves is derived and solved numerically to obtain both the frequencies and damping rates of the fundamental and first-overtone, $k=1,2$ modes of both the kink ($m=1$), and fluting ($m=2$) waves. Where $k$ and $m$ are the longitudinal and azimuthal mode numbers, respectively.

This paper describes a 50 MHz system being developed for GMRT to provide imaging capability in the frequency range 30-90MHz. Due to its larger collecting area and higher antenna efficiency, the low frequency GMRT system will be several times more sensitive than the present 74 MHz VLA system and is likely to remain a competitive instrument in this frequency band. In the first phase of this project, receiver systems consisting of V-dipole feeds and front-ends have been installed on four of the thirty GMRT antennas. Test observations were carried out on a number of bright 3C sources. The initial results are encouraging. This paper will also describe results of simultaneous observations carried out using the existing GMRT correlator, the new GMRT software correlator and a system employing digitization and direct recording of signals at two antenna bases.