The combination of different cosmological probes offers stringent tests of the $\Lambda$CDM model and enhanced control of systematics. For this purpose, we present an extension of the lightcone generator UFalcon first introduced in Sgier et al. 2019 (arXiv:1801.05745), enabling the simulation of a self-consistent set of maps for different cosmological probes. Each realization is generated from the same underlying simulated density field, and contains full-sky maps of different probes, namely weak lensing shear, galaxy overdensity including RSD, CMB lensing, and CMB temperature anisotropies from the ISW effect. The lightcone generation performed by UFalcon is parallelized and based on the replication of a large periodic volume simulated with the GPU-accelerated $N$-Body code PkdGrav3. The post-processing to construct the lightcones requires only a runtime of about 1 walltime-hour corresponding to about 100 CPU-hours. We use a randomization procedure to increase the number of quasi-independent full-sky UFalcon map-realizations, which enables us to compute an accurate multi-probe covariance matrix. Using this framework, we forecast cosmological parameter constraints by performing a multi-probe likelihood analysis for a combination of simulated future stage-IV-like surveys. We find that the inclusion of the cross-correlations between the probes significantly increases the information gain in the parameter constraints. We also find that the use of a non-Gaussian covariance matrix is increasingly important, as more probes and cross-correlation power spectra are included. A version of the UFalcon package currently including weak gravitational lensing is publicly available.

For the next generation of spectroscopic galaxy surveys, it is important to forecast their performances and to accurately interpret their large data sets. For this purpose, it is necessary to consistently simulate different populations of galaxies, in particular Emission Line Galaxies (ELGs), less used in the past for cosmological purposes. In this work, we further the forward modeling approach presented in Fagioli et al. 2018, by extending the spectra simulator Uspec to model galaxies of different kinds with improved parameters from Tortorelli et al. 2020. Furthermore, we improve the modeling of the selection function by using the image simulator Ufig. We apply this to the Sloan Digital Sky Survey (SDSS), and simulate $\sim157,000$ multi-band images. We pre-process and analyse them to apply cuts for target selection, and finally simulate SDSS/BOSS DR14 galaxy spectra. We compute photometric, astrometric and spectroscopic properties for red and blue, real and simulated galaxies, finding very good agreement. We compare the statistical properties of the samples by decomposing them with Principal Component Analysis (PCA). We find very good agreement for red galaxies and a good, but less pronounced one, for blue galaxies, as expected given the known difficulty of simulating those. Finally, we derive stellar population properties, mass-to-light ratios, ages and metallicities, for all samples, finding again very good agreement. This shows how this method can be used not only to forecast cosmology surveys, but it is also able to provide insights into studies of galaxy formation and evolution.

We present deep $g$- and $r$-band Magellan/Megacam photometry of two dwarf galaxy candidates discovered in the Dark Energy Survey (DES), Grus I and Indus II (DES J2038-4609). For the case of Grus I, we resolved the main sequence turn-off (MSTO) and $\sim 2$ mags below it. The MSTO can be seen at $g_0\sim 24$ with a photometric uncertainty of $0.03$ mag. We show Grus I to be consistent with an old, metal-poor ($\sim 13.3$ Gyr, [Fe/H]$\sim-1.9$) dwarf galaxy. We derive updated distance and structural parameters for Grus I using this deep, uniform, wide-field data set. We find an azimuthally averaged half-light radius more than two times larger ($\sim 151^{+21}_{-31}$ pc; $\sim 4.^{\prime} 16^{+0.54}_{-0.74}$) and an absolute $V$-band magnitude $\sim-4.1$ that is $\sim 1$ magnitude brighter than previous studies. We obtain updated distance, ellipticity, and centroid parameters which are in agreement with other studies within uncertainties. Although our photometry of Indus II is $\sim 2-3$ magnitudes deeper than the DES Y1 Public release, we find no coherent stellar population at its reported location. The original detection was located in an incomplete region of sky in the DES Y2Q1 data set and was flagged due to potential blue horizontal branch member stars. The best fit isochrone parameters are physically inconsistent with both dwarf galaxies and globular clusters. We conclude that Indus II is likely a false-positive, flagged due to a chance alignment of stars along the line of sight.

We forecast astrophysical and cosmological parameter constraints from synergies between 21 cm intensity mapping and wide field optical galaxy surveys (both spectroscopic and photometric) over $z \sim 0-3$. We focus on the following survey combinations in this work: (i) a CHIME-like and DESI-like survey in the northern hemisphere, (ii) an LSST-like and SKA I MID-like survey and (ii) a MeerKAT-like and DES-like survey in the southern hemisphere. We work with the $\Lambda$CDM cosmological model having parameters $\{h, \Omega_m, n_s, \Omega_b, \sigma_8\}$, parameters $v_{c,0}$ and $\beta$ representing the cutoff and slope of the HI-halo mass relation in the previously developed HI halo model framework, and a parameter $Q$ that represents the scale dependence of the optical galaxy bias. Using a Fisher forecasting framework, we explore (i) the effects of the HI and galaxy astrophysical uncertainties on the cosmological parameter constraints, assuming priors from the present knowledge of the astrophysics, (ii) the improvements on astrophysical constraints over their current priors in the three configurations considered, (ii) the tightening of the constraints on the parameters relative to the corresponding HI auto-correlation surveys alone.

In any imaging survey, measuring accurately the astronomical background light is crucial to obtain good photometry. This paper introduces BKGnet, a deep neural network to predict the background and its associated error. BKGnet has been developed for data from the Physics of the Accelerating Universe Survey (PAUS), an imaging survey using a 40 narrow-band filter camera (PAUCam). Images obtained with PAUCam are affected by scattered light: an optical effect consisting of light multiply that deposits energy in specific detector regions contaminating the science measurements. Fortunately, scattered light is not a random effect, but it can be predicted and corrected for. We have found that BKGnet background predictions are very robust to distorting effects, while still being statistically accurate. On average, the use of BKGnet improves the photometric flux measurements by 7% and up to 20% at the bright end. BKGnet also removes a systematic trend in the background error estimation with magnitude in the i-band that is present with the current PAU data management method. With BKGnet, we reduce the photometric redshift outlier rate

Current and upcoming cosmological experiments open a new era of precision cosmology, thus demanding accurate theoretical predictions for cosmological observables. Because of the complexity of the codes delivering such predictions, reaching a high level of numerical accuracy is challenging. Among the codes already fulfilling this task, $\textsf{PyCosmo}$ is a Python based framework providing solutions to the Einstein-Boltzmann equations and accurate predictions for cosmological observables. In this work, we first describe how the observables are implemented. Then, we check the accuracy of the theoretical predictions for background quantities, power spectra and Limber and beyond-Limber angular power spectra by comparison with other codes: the Core Cosmology Library ($\texttt{CCL}$), $\texttt{CLASS}$, $\texttt{HMCode}$ and $\texttt{iCosmo}$. In our analysis we quantify the agreement of $\textsf{PyCosmo}$ with the other codes, for a range of cosmological models, monitored through a series of $\textit{unit tests}$. $\textsf{PyCosmo}$, conceived as a multi purpose cosmology calculation tool in $\texttt{Python}$, is designed to be interactive and user friendly. A current version of the code (without the Boltzmann Solver) is publicly available and can be used interactively on the platform $\textsf{PyCosmo Hub}$, all accessible from this link: https://cosmology.ethz.ch/research/software-lab/PyCosmo.html . On the hub the users can perform their own computations using $\texttt{Jupyter Notebooks}$ without the need of installing any software, access to the results presented in this work and benefit from tutorial notebooks illustrating the usage of the code. The link above also redirects to the code release and documentation.

For ground-based optical imaging with current CCD technology, the Poisson fluctuations in source and sky background photon arrivals dominate the noise budget and are readily estimated. Another component of noise, however, is the signal from the undetected population of stars and galaxies. Using injection of artificial galaxies into images, we demonstrate that the measured variance of galaxy moments (used for weak gravitational lensing measurements) in Dark Energy Survey (DES) images is significantly in excess of the Poisson predictions, by up to 30\%, and that the background sky levels are overestimated by current software. By cross-correlating distinct images of "empty" sky regions, we establish that there is a significant image noise contribution from undetected static sources (US), which on average are mildly resolved at DES resolution. Treating these US as a stationary noise source, we compute a correction to the moment covariance matrix expected from Poisson noise. The corrected covariance matrix matches the moment variances measured on the injected DES images to within 5\%. Thus we have an empirical method to statistically account for US in weak lensing measurements, rather than requiring extremely deep sky simulations. We also find that local sky determinations can remove the bias in flux measurements, at a small penalty in additional, but quantifiable, noise.

We present MWFitting, a method to fit the stellar components of the Galaxy by comparing Hess Diagrams (HDs) from TRILEGAL models to real data. We apply MWFitting to photometric data from the first three years of the Dark Energy Survey (DES). After removing regions containing known resolved stellar systems such as globular clusters, dwarf galaxies, nearby galaxies, the Large Magellanic Cloud and the Sagittarius Stream, our main sample spans a total area of $\sim$2,300 deg$^2$ distributed across the DES footprint. We further explore a smaller subset ($\sim$ 1,300 deg$^2$) that excludes all regions with known stellar streams and stellar overdensities. Validation tests on synthetic data possessing similar properties to the DES data show that the method is able to recover input parameters with a precision better than 3\%. Based on the best-fit models, we create simulated stellar catalogues covering the whole DES footprint down to $g = 24$ magnitude. Comparisons of data and simulations provide evidence for a break in the power law index describing the stellar density of the Milky Way (MW) halo. Several previously discovered stellar over-densities are recovered in the residual stellar density map, showing the reliability of MWFitting in determining the Galactic components. Simulations made with the best-fitting parameters are a promising way to predict MW star counts for surveys such as LSST and Euclid.

The Beyond Ultra-deep Frontier Fields and Legacy Observations (BUFFALO) is a 101 orbit + 101 parallel Cycle 25 Hubble Space Telescope Treasury program taking data from 2018-2020. BUFFALO will expand existing coverage of the Hubble Frontier Fields (HFF) in WFC3/IR F105W, F125W, and F160W and ACS/WFC F606W and F814W around each of the six HFF clusters and flanking fields. This additional area has not been observed by HST but is already covered by deep multi-wavelength datasets, including Spitzer and Chandra. As with the original HFF program, BUFFALO is designed to take advantage of gravitational lensing from massive clusters to simultaneously find high-redshift galaxies which would otherwise lie below HST detection limits and model foreground clusters to study properties of dark matter and galaxy assembly. The expanded area will provide a first opportunity to study both cosmic variance at high redshift and galaxy assembly in the outskirts of the large HFF clusters. Five additional orbits are reserved for transient followup. BUFFALO data including mosaics, value-added catalogs and cluster mass distribution models will be released via MAST on a regular basis, as the observations and analysis are completed for the six individual clusters.

The galaxy Luminosity Function (LF) is a key observable for galaxy formation, evolution studies and for cosmology. In this work, we propose a novel technique to forward model wide-field galaxy surveys using the fast image simulator UFig and measure the LF of galaxies in the B-band. We use Approximate Bayesian Computation (ABC) to constrain the galaxy population model parameters of the simulations and match data from the Canada-France-Hawaii Telescope Legacy Survey (CFHTLS). We define a number of distance metrics between the simulated and the survey data. By exploring the parameter space of the galaxy population model through ABC to find the set of parameters that minimize these distance metrics, we obtain constraints on the LFs of blue and red galaxies as a function of redshift. We find that $\mathrm{M^*}$ fades by $\Delta \mathrm{M}^*_{\mathrm{0.1-1.0,b}} = 0.37 \pm 0.34$ and $\Delta \mathrm{M}^*_{\mathrm{0.1-1.0,r}} = 0.58 \pm 0.42$ magnitudes between redshift $\mathrm{z = 1}$ and $\mathrm{z = 0.1}$ for blue and red galaxies, respectively. We also find that $\phi^*$ for blue galaxies stays roughly constant between redshift $\mathrm{z = 0.1}$ and $\mathrm{z=1}$, while for red galaxies it decreases of $\sim 90\%$. We compare our results to other measurements, finding good agreement at all redshifts, for both blue and red galaxies. To further test our results, we compare the redshift distributions for survey and simulated data. We use the spectroscopic redshift distribution from the VIMOS Public Extragalactic Redshift Survey (VIPERS) and we apply the same selection in colours and magnitudes on our simulations. We find a good agreement between the survey and the simulated redshift distributions. We provide best-fit values and uncertainties for the parameters of the LF. This work offers excellent prospects for measuring other galaxy population properties as a function of redshift using ABC.

We describe the observation and confirmation of \nbconfirmtext\ new strong gravitational lenses discovered in Year 1 data from the Dark Energy Survey (DES). We created candidate lists based on a) galaxy group and cluster samples and b) photometrically selected galaxy samples. We selected 46 candidates through visual inspection and then used the Gemini Multi-Object Spectrograph (GMOS) at the Gemini South telescope to acquire spectroscopic follow-up of 21 of these candidates. Through analysis of this spectroscopic follow-up data, we confirmed nine new lensing systems and rejected 2 candidates, but the analysis was inconclusive on 10 candidates. For each of the confirmed systems, we report measured spectroscopic properties, estimated \einsteinradiussub, and estimated enclosed masses. The sources that we targeted have an i-band surface brightness range of iSB ~ 22 - 24 mag arcsec^2 and a spectroscopic redshift range of zspec ~0.8 - 2.6. The lens galaxies have a photometric redshift range of zlens ~ 0.3 - 0.7. The lensing systems range in image-lens separation 2 - 9 arcsec and in enclosed mass 10^12 - 10^13 Msol.

The PAU Survey (PAUS) is an innovative photometric survey with 40 narrow bands at the William Herschel Telescope (WHT). The narrow bands are spaced at 100\AA\ intervals covering the range 4500\AA\ to 8500\AA\ and, in combination with standard broad bands, enable excellent redshift precision. This paper describes the technique, galaxy templates and additional photometric calibration used to determine early photometric redshifts from PAUS. Using BCNz2, a new photometric redshift code developed for this purpose, we characterise the photometric redshift performance using PAUS data on the COSMOS field. Comparison to secure spectra from zCOSMOS DR3 shows that PAUS achieves $\sigma_{68} /(1+z) = 0.0037$ to $i_{\mathrm{AB}} < 22.5$ when selecting the best 50% of the sources based on a photometric redshift quality cut. Furthermore, a higher photo-z precision ($\sigma_{68}/(1+z) \sim 0.001$) is obtained for a bright and high quality selection, which is driven by the identification of emission lines. We conclude that PAUS meets its design goals, opening up a hitherto uncharted regime of deep, wide, and dense galaxy survey with precise redshifts that will provide unique insights into the formation, evolution and clustering of galaxies, as well as their intrinsic alignments.

Upcoming weak-lensing surveys have the potential to become leading cosmological probes provided all systematic effects are under control. Recently, the ejection of gas due to feedback energy from active galactic nuclei (AGN) has been identified as major source of uncertainty, challenging the success of future weak-lensing probes in terms of cosmology. In this paper we investigate the effects of baryons on the number of weak-lensing peaks in the convergence field. Our analysis is based on full-sky convergence maps constructed via light-cones from $N$-body simulations, and we rely on the baryonic correction model of Schneider et al. (2019) to model the baryonic effects on the density field. As a result we find that the baryonic effects strongly depend on the Gaussian smoothing applied to the convergence map. For a DES-like survey setup, a smoothing of $\theta_k\gtrsim8$ arcmin is sufficient to keep the baryon signal below the expected statistical error. Smaller smoothing scales lead to a significant suppression of high peaks (with signal-to-noise above 2), while lower peaks are not affected. The situation is more severe for a Euclid-like setup, where a smoothing of $\theta_k\gtrsim16$ arcmin is required to keep the baryonic suppression signal below the statistical error. Smaller smoothing scales require a full modelling of baryonic effects since both low and high peaks are strongly affected by baryonic feedback.

Convolutional Neural Networks (CNN) have recently been demonstrated on synthetic data to improve upon the precision of cosmological inference. In particular they have the potential to yield more precise cosmological constraints from weak lensing mass maps than the two-point functions. We present the cosmological results with a CNN from the KiDS-450 tomographic weak lensing dataset, constraining the total matter density $\Omega_m$, the fluctuation amplitude $\sigma_8$, and the intrinsic alignment amplitude $A_{\rm{IA}}$. We use a grid of N-body simulations to generate a training set of tomographic weak lensing maps. We test the robustness of the expected constraints to various effects, such as baryonic feedback, simulation accuracy, different value of $H_0$, or the lightcone projection technique. We train a set of ResNet-based CNNs with varying depths to analyze sets of tomographic KiDS mass maps divided into 20 flat regions, with applied Gaussian smoothing of $\sigma=2.34$ arcmin. The uncertainties on shear calibration and $n(z)$ error are marginalized in the likelihood pipeline. Following a blinding scheme, we derive constraints of $S_8 = \sigma_8 (\Omega_m/0.3)^{0.5} = 0.777^{+0.038}_{-0.036}$ with our CNN analysis, with $A_{\rm{IA}}=1.398^{+0.779}_{-0.724}$. We compare this result to the power spectrum analysis on the same maps and likelihood pipeline and find an improvement of about $30\%$ for the CNN. We discuss how our results offer excellent prospects for the use of deep learning in future cosmological data analysis.

Weak lensing by large-scale structure is a powerful probe of cosmology and of the dark universe. This cosmic shear technique relies on the accurate measurement of the shapes and redshifts of background galaxies and requires precise control of systematic errors. The Monte Carlo Control Loops (MCCL) is a forward modelling method designed to tackle this problem. It relies on the Ultra Fast Image Generator (UFig) to produce simulated images tuned to match the target data statistically, followed by calibrations and tolerance loops. We present the first end-to-end application of this method, on the Dark Energy Survey (DES) Year 1 wide field imaging data. We simultaneously measure the shear power spectrum $C_{\ell}$ and the redshift distribution $n(z)$ of the background galaxy sample. The method includes maps of the systematic sources, Point Spread Function (PSF), an Approximate Bayesian Computation (ABC) inference of the simulation model parameters, a shear calibration scheme, and the fast estimation of the covariance matrix. We find a close statistical agreement between the simulations and the DES Y1 data using an array of diagnostics. In a non-tomographic setting, we derive a set of $C_\ell$ and $n(z)$ curves that encode the cosmic shear measurement, as well as the systematic uncertainty. Following a blinding scheme, we measure the combination of $\Omega_m$, $\sigma_8$, and intrinsic alignment amplitude $A_{\rm{IA}}$, defined as $S_8D_{\rm{IA}} = \sigma_8(\Omega_m/0.3)^{0.5}D_{\rm{IA}}$, where $D_{\rm{IA}}=1-0.11(A_{\rm{IA}}-1)$. We find $S_8D_{\rm{IA}}=0.895^{+0.054}_{-0.039}$, where systematics are at the level of roughly 60\% of the statistical errors. We discuss these results in the context of earlier cosmic shear analyses of the DES Y1 data. Our findings indicate that this method and its fast runtime offer good prospects for cosmic shear measurements with future wide-field surveys.

Feedback processes from baryons are expected to strongly affect weak-lensing observables of current and future cosmological surveys. In this paper we present a new parametrisation of halo profiles based on gas, stellar, and dark matter density components. This parametrisation is used to modify outputs of gravity-only $N$-body simulations (following the prescription of Schneider and Teyssier [1]) in order to mimic baryonic effects on the matter density field. The resulting baryonic correction model relies on a few well motivated physical parameters and is able to reproduce the redshift zero clustering signal of hydrodynamical simulations at two percent accuracy below $k\sim10$ h/Mpc. A detailed study of the baryon suppression effects on the matter power spectrum and the weak lensing shear correlation reveals that the signal is dominated by two parameters describing the slope of the gas profile in haloes and the maximum radius of gas ejection. We show that these parameters can be constrained with the observed gas fraction of galaxy groups and clusters from X-ray data. Based on these observations we predict a beyond percent effect on the power spectrum above $k=0.2-1.0$ h/Mpc with a maximum suppression of 15-25 percent around $k\sim 10$ h/Mpc. As a result, the weak lensing angular shear power spectrum is suppressed by 15-25 percent at scales beyond $\ell\sim 100-600$ and the shear correlations $\xi_{+}$ and $\xi_{-}$ are affected at the 10-25 percent level below 5 and 50 arc-minutes, respectively. The relatively large uncertainties of these predictions are a result of the poorly known hydrostatic mass bias of current X-ray observations as well as the generic difficulty to observe the low density gas outside of haloes.

We describe the first public data release of the Dark Energy Survey, DES DR1, consisting of reduced single epoch images, coadded images, coadded source catalogs, and associated products and services assembled over the first three years of DES science operations. DES DR1 is based on optical/near-infrared imaging from 345 distinct nights (August 2013 to February 2016) by the Dark Energy Camera mounted on the 4-m Blanco telescope at Cerro Tololo Inter-American Observatory in Chile. We release data from the DES wide-area survey covering ~5,000 sq. deg. of the southern Galactic cap in five broad photometric bands, grizY. DES DR1 has a median delivered point-spread function of g = 1.12, r = 0.96, i = 0.88, z = 0.84, and Y = 0.90 arcsec FWHM, a photometric precision of < 1% in all bands, and an astrometric precision of 151 mas. The median coadded catalog depth for a 1.95" diameter aperture at S/N = 10 is g = 24.33, r = 24.08, i = 23.44, z = 22.69, and Y = 21.44 mag. DES DR1 includes nearly 400M distinct astronomical objects detected in ~10,000 coadd tiles of size 0.534 sq. deg. produced from ~39,000 individual exposures. Benchmark galaxy and stellar samples contain ~310M and ~ 80M objects, respectively, following a basic object quality selection. These data are accessible through a range of interfaces, including query web clients, image cutout servers, jupyter notebooks, and an interactive coadd image visualization tool. DES DR1 constitutes the largest photometric data set to date at the achieved depth and photometric precision.

We use the results of previous work building a halo model formalism for the distribution of neutral hydrogen, along with experimental parameters of future radio facilities, to place forecasts on astrophysical and cosmological parameters from next generation surveys. We consider 21 cm intensity mapping surveys conducted using the BINGO, CHIME, FAST, TianLai, MeerKAT and SKA experimental configurations. We work with the 5-parameter cosmological dataset of {$\Omega_m, \sigma_8, h, n_s, \Omega_b$} assuming a flat $\Lambda$CDM model, and the astrophysical parameters {$v_{c,0}, \beta$} which represent the cutoff and slope of the HI- halo mass relation. We explore (i) quantifying the effects of the astrophysics on the recovery of the cosmological parameters, (ii) the dependence of the cosmological forecasts on the details of the astrophysical parametrization, and (iii) the improvement of the constraints on probing smaller scales in the HI power spectrum. For an SKA I MID intensity mapping survey alone, probing scales up to $\ell_{\rm max} = 1000$, we find a factor of $1.1 - 1.3$ broadening in the constraints on $\Omega_b$ and $\Omega_m$, and of $2.4 - 2.6$ on $h$, $n_s$ and $\sigma_8$, if we marginalize over astrophysical parameters without any priors. However, even the prior information coming from the present knowledge of the astrophysics largely alleviates this broadening. These findings do not change significantly on considering an extended HIHM relation, illustrating the robustness of the results to the choice of the astrophysical parametrization. Probing scales up to $\ell_{\rm max} = 2000$ improves the constraints by factors of 1.5-1.8. The forecasts improve on increasing the number of tomographic redshift bins, saturating, in many cases, with 4 - 5 redshift bins. We also forecast constraints for intensity mapping with other experiments, and draw similar conclusions.

We present cosmological results from a combined analysis of galaxy clustering and weak gravitational lensing, using 1321 deg$^2$ of $griz$ imaging data from the first year of the Dark Energy Survey (DES Y1). We combine three two-point functions: (i) the cosmic shear correlation function of 26 million source galaxies in four redshift bins, (ii) the galaxy angular autocorrelation function of 650,000 luminous red galaxies in five redshift bins, and (iii) the galaxy-shear cross-correlation of luminous red galaxy positions and source galaxy shears. To demonstrate the robustness of these results, we use independent pairs of galaxy shape, photometric redshift estimation and validation, and likelihood analysis pipelines. To prevent confirmation bias, the bulk of the analysis was carried out while blind to the true results; we describe an extensive suite of systematics checks performed and passed during this blinded phase. The data are modeled in flat $\Lambda$CDM and $w$CDM cosmologies, marginalizing over 20 nuisance parameters, varying 6 (for $\Lambda$CDM) or 7 (for $w$CDM) cosmological parameters including the neutrino mass density and including the 457 $\times$ 457 element analytic covariance matrix. We find consistent cosmological results from these three two-point functions, and from their combination obtain $S_8 \equiv \sigma_8 (\Omega_m/0.3)^{0.5} = 0.783^{+0.021}_{-0.025}$ and $\Omega_m = 0.264^{+0.032}_{-0.019}$ for $\Lambda$CDM for $w$CDM, we find $S_8 = 0.794^{+0.029}_{-0.027}$, $\Omega_m = 0.279^{+0.043}_{-0.022}$, and $w=-0.80^{+0.20}_{-0.22}$ at 68% CL. The precision of these DES Y1 results rivals that from the Planck cosmic microwave background measurements, allowing a comparison of structure in the very early and late Universe on equal terms. Although the DES Y1 best-fit values for $S_8$ and $\Omega_m$ are lower than the central values from Planck ...

The direct detection and characterization of planetary and substellar companions at small angular separations is a rapidly advancing field. Dedicated high-contrast imaging instruments deliver unprecedented sensitivity, enabling detailed insights into the atmospheres of young low-mass companions. In addition, improvements in data reduction and PSF subtraction algorithms are equally relevant for maximizing the scientific yield, both from new and archival data sets. We aim at developing a generic and modular data reduction pipeline for processing and analysis of high-contrast imaging data obtained with pupil-stabilized observations. The package should be scalable and robust for future implementations and in particular well suitable for the 3-5 micron wavelength range where typically (ten) thousands of frames have to be processed and an accurate subtraction of the thermal background emission is critical. PynPoint is written in Python 2.7 and applies various image processing techniques, as well as statistical tools for analyzing the data, building on open-source Python packages. The current version of PynPoint has evolved from an earlier version that was developed as a PSF subtraction tool based on PCA. The architecture of PynPoint has been redesigned with the core functionalities decoupled from the pipeline modules. Modules have been implemented for dedicated processing and analysis steps, including background subtraction, frame registration, PSF subtraction, photometric and astrometric measurements, and estimation of detection limits. The pipeline package enables end-to-end data reduction of pupil-stabilized data and supports classical dithering and coronagraphic data sets. As an example, we processed archival VLT/NACO L' and M' data of beta Pic b and reassessed the planet's brightness and position with an MCMC analysis, and we provide a derivation of the photometric error budget.

With the high-precision data from current and upcoming experiments, it becomes increasingly important to perform consistency tests of the standard cosmological model. In this work, we focus on consistency measures between different data sets and methods that allow us to assess the goodness of fit of different models. We address both of these questions using the relative entropy or Kullback-Leibler (KL) divergence [Kullback et al., 1951]. First, we revisit the relative entropy as a consistency measure between data sets and further investigate some of its key properties, such as asymmetry and path dependence. We then introduce a novel model rejection framework, which is based on the relative entropy and the posterior predictive distribution. We validate the method on several toy models and apply it to Type Ia supernovae data from the JLA and CMB constraints from Planck 2015, testing the consistency of the data with six different cosmological models.

Deep learning is a powerful analysis technique that has recently been proposed as a method to constrain cosmological parameters from weak lensing mass maps. Due to its ability to learn relevant features from the data, it is able to extract more information from the mass maps than the commonly used power spectrum, and thus achieve better precision for cosmological parameter measurement. We explore the advantage of Convolutional Neural Networks (CNN) over the power spectrum for varying levels of shape noise and different smoothing scales applied to the maps. We compare the cosmological constraints from the two methods in the $\Omega_M-\sigma_8$ plane for sets of 400 deg$^2$ convergence maps. We find that, for a shape noise level corresponding to 8.53 galaxies/arcmin$^2$ and the smoothing scale of $\sigma_s = 2.34$ arcmin, the network is able to generate 45% tighter constraints. For smaller smoothing scale of $\sigma_s = 1.17$ the improvement can reach $\sim 50 \%$, while for larger smoothing scale of $\sigma_s = 5.85$, the improvement decreases to 19%. The advantage generally decreases when the noise level and smoothing scales increase. We present a new training strategy to train the neural network with noisy data, as well as considerations for practical applications of the deep learning approach.

Dark matter in the universe evolves through gravity to form a complex network of halos, filaments, sheets and voids, that is known as the cosmic web. Computational models of the underlying physical processes, such as classical N-body simulations, are extremely resource intensive, as they track the action of gravity in an expanding universe using billions of particles as tracers of the cosmic matter distribution. Therefore, upcoming cosmology experiments will face a computational bottleneck that may limit the exploitation of their full scientific potential. To address this challenge, we demonstrate the application of a machine learning technique called Generative Adversarial Networks (GAN) to learn models that can efficiently generate new, physically realistic realizations of the cosmic web. Our training set is a small, representative sample of 2D image snapshots from N-body simulations of size 500 and 100 Mpc. We show that the GAN-generated samples are qualitatively and quantitatively very similar to the originals. For the larger boxes of size 500 Mpc, it is very difficult to distinguish them visually. The agreement of the power spectrum $P_k$ is 1-2\% for most of the range, between $k=0.06$ and $k=0.4$. An important advantage of generating cosmic web realizations with a GAN is the considerable gains in terms of computation time. Each new sample generated by a GAN takes a fraction of a second, compared to the many hours needed by traditional N-body techniques. We anticipate that the use of generative models such as GANs will therefore play an important role in providing extremely fast and precise simulations of cosmic web in the era of large cosmological surveys, such as Euclid and Large Synoptic Survey Telescope (LSST).

Classification of stars and galaxies is a well-known astronomical problem that has been treated using different approaches, most of them relying on morphological information. In this paper, we tackle this issue using the low-resolution spectra from narrow band photometry, provided by the PAUS (Physics of the Accelerating Universe) survey. We find that, with the photometric fluxes from the 40 narrow band filters and without including morphological information, it is possible to separate stars and galaxies to very high precision, 98.4% purity with a completeness of 98.8% for objects brighter than I = 22.5. This precision is obtained with a Convolutional Neural Network as a classification algorithm, applied to the objects' spectra. We have also applied the method to the ALHAMBRA photometric survey and we provide an updated classification for its Gold sample.

We present Lenstronomy, a multi-purpose open-source gravitational lens modeling python package. Lenstronomy is able to reconstruct the lens mass and surface brightness distributions of strong lensing systems using forward modelling. Lenstronomy supports a wide range of analytic lens and light models in arbitrary combination. The software is also able to reconstruct complex extended sources (Birrer et. al 2015) as well as being able to model point sources. We designed Lenstronomy to be stable, flexible and numerically accurate, with a clear user interface that could be deployed across different platforms. Throughout its development, we have actively used Lenstronomy to make several measurements including deriving constraints on dark matter properties in strong lenses, measuring the expansion history of the universe with time-delay cosmography, measuring cosmic shear with Einstein rings and decomposing quasar and host galaxy light. The software is distributed under the MIT license. The documentation, starter guide, example notebooks, source code and installation guidelines can be found at https://lenstronomy.readthedocs.io.

Weak lensing peak counts are a powerful statistical tool for constraining cosmological parameters. So far, this method has been applied only to surveys with relatively small areas, up to several hundred square degrees. As future surveys will provide weak lensing datasets with size of thousands of square degrees, the demand on the theoretical prediction of the peak statistics will become heightened. In particular, large simulations of increased cosmological volume are required. In this work, we investigate the possibility of using simulations generated with the fast Comoving-Lagrangian acceleration (COLA) method, coupled to the convergence map generator Ufalcon, for predicting the peak counts. We examine the systematics introduced by the COLA method by comparing it with a full TreePM code. We find that for a 2000 deg$^2$ survey, the systematic error is much smaller than the statistical error. This suggests that the COLA method is able to generate promising theoretical predictions for weak lensing peaks. We also examine the constraining power of various configurations of data vectors, exploring the influence of splitting the sample into tomographic bins and combining different smoothing scales. We find the combination of smoothing scales to have the most constraining power, improving the constraints on the $S_8$ amplitude parameter by at least 40% compared to a single smoothing scale, with tomography brining only limited increase in measurement precision.

Galaxy spectra are essential to probe the spatial distribution of galaxies in our Universe. To better interpret current and future spectroscopic galaxy redshift surveys, it is important to be able to simulate these data sets. We describe Uspec, a forward modeling tool to generate galaxy spectra taking into account some intrinsic galaxy properties as well as instrumental responses of a given telescope. The model for the intrinsic properties of the galaxy population, i.e., the luminosity functions, and size and spectral coefficients distribu- tions, was developed in an earlier work for broad-band imaging surveys [1], and we now aim to test the model further using spectroscopic data. We apply Uspec to the SDSS/CMASS sample of Luminous Red Galaxies (LRGs). We construct selection cuts that match those used to build this LRG sample, which we then apply to data and simulations in the same way. The resulting real and simulated average spectra show a good statistical agreement overall, with residual differences likely coming from a bluer galaxy population of the simulated sam- ple. We also do not explore the impact of non-solar element ratios in our simulations. For a quantitative comparison, we perform Principal Component Analysis (PCA) of the sets of spectra. By comparing the PCs constructed from simulations and data, we find good agree- ment for all components. The distributions of the eigencoefficients also show an appreciable overlap. We are therefore able to properly simulate the LRG sample taking into account the SDSS/BOSS instrumental responses. The differences between the two samples can be ascribed to the intrinsic properties of the simulated galaxy population, which can be reduced by further improvements of our modelling method in the future. We discuss how these results can be useful for the forward modeling of upcoming large spectroscopic surveys.

We present a structural and morphological catalogue for 45 million objects selected from the first year of data from the Dark Energy Survey (DES). Single Sersic fits and non-parametric measurements are produced for g, r and i filters. The parameters from the best-fitting Sersic model (total magnitude, half-light radius, Sersic index, axis ratio and position angle) are measured with Galfit; the non-parametric coefficients (concentration, asymmetry, clumpiness, Gini, M20) are provided using the Zurich Estimator of Structural Types (ZEST+). To study the statistical uncertainties, we consider a sample of state-of-the-art image simulations with a realistic distribution in the input parameter space and then process and analyse them as we do with real data: this enables us to quantify the observational biases due to PSF blurring and magnitude effects and correct the measurements as a function of magnitude, galaxy size, Sersic index (concentration for the analysis of the non-parametric measurements) and ellipticity. We present the largest structural catalogue to date: we find that accurate and complete measurements for all the structural parameters are typically obtained for galaxies with SExtractor MAG AUTO I < 21. Indeed, the parameters in the filters i and r can be overall well recovered up to MAG AUTO < 21.5, corresponding to a fitting completeness of ~90% below this threshold, for a total of 25 million galaxies. The combination of parametric and non-parametric structural measurements makes this catalogue an important instrument to explore and understand how galaxies form and evolve. The catalogue described in this paper will be publicly released alongside the Dark Energy Survey collaboration Y1 cosmology data products at the following URL: https://des.ncsa.illinois.edu/releases/y1a1/gold/morphology.

Modeling the Point Spread Function (PSF) of wide-field surveys is vital for many astrophysical applications and cosmological probes including weak gravitational lensing. The PSF smears the image of any recorded object and therefore needs to be taken into account when inferring properties of galaxies from astronomical images. In the case of cosmic shear, the PSF is one of the dominant sources of systematic errors and must be treated carefully to avoid biases in cosmological parameters. Recently, forward modeling approaches to calibrate shear measurements within the Monte-Carlo Control Loops ($MCCL$) framework have been developed. These methods typically require simulating a large amount of wide-field images, thus, the simulations need to be very fast yet have realistic properties in key features such as the PSF pattern. Hence, such forward modeling approaches require a very flexible PSF model, which is quick to evaluate and whose parameters can be estimated reliably from survey data. We present a PSF model that meets these requirements based on a fast deep-learning method to estimate its free parameters. We demonstrate our approach on publicly available SDSS data. We extract the most important features of the SDSS sample via principal component analysis. Next, we construct our model based on perturbations of a fixed base profile, ensuring that it captures these features. We then train a Convolutional Neural Network to estimate the free parameters of the model from noisy images of the PSF. This allows us to render a model image of each star, which we compare to the SDSS stars to evaluate the performance of our method. We find that our approach is able to accurately reproduce the SDSS PSF at the pixel level, which, due to the speed of both the model evaluation and the parameter estimation, offers good prospects for incorporating our method into the $MCCL$ framework.

We present a mock catalogue for the Physics of the Accelerating Universe Survey (PAUS) and use it to quantify the competitiveness of the narrow band imaging for measuring spectral features and galaxy clustering. The mock agrees with observed number count and redshift distribution data. We demonstrate the importance of including emission lines in the narrow band fluxes. We show that PAUCam has sufficient resolution to measure the strength of the 4000\AA{} break to the nominal PAUS depth. We predict the evolution of a narrow band luminosity function and show how this can be affected by the OII emission line. We introduce new rest frame broad bands (UV and blue) that can be derived directly from the narrow band fluxes. We use these bands along with D4000 and redshift to define galaxy samples and provide predictions for galaxy clustering measurements. We show that systematic errors in the recovery of the projected clustering due to photometric redshift errors in PAUS are significantly smaller than the expected statistical errors. The galaxy clustering on two halo scales can be recovered quantatively without correction, and all qualitative trends seen in the one halo term are recovered. In this analysis mixing between samples reduces the expected contrast between the one halo clustering of red and blue galaxies and demonstrates the importance of a mock catalogue for interpreting galaxy clustering results. The mock catalogue is available on request at https://cosmohub.pic.es/home.

Weak gravitational lensing is a powerful probe of the dark sector, once measurement systematic errors can be controlled. In Refregier & Amara (2014), a calibration method based on forward modeling, called MCCL, was proposed. This relies on fast image simulations (e.g., UFig; Berge et al. 2013) that capture the key features of galaxy populations and measurement effects. The MCCL approach has been used in Herbel et al. (2017) to determine the redshift distribution of cosmological galaxy samples and, in the process, the authors derived a model for the galaxy population mainly based on broad-band photometry. Here, we test this model by forward modeling the 40 narrow-band photometry given by the novel PAU Survey (PAUS). For this purpose, we apply the same forced photometric pipeline on data and simulations using Source Extractor (Bertin & Arnouts 1996). The image simulation scheme performance is assessed at the image and at the catalogues level. We find good agreement for the distribution of pixel values, the magnitudes, in the magnitude-size relation and the interband correlations. A principal component analysis is then performed, in order to derive a global comparison of the narrow-band photometry between the data and the simulations. We use a `mixing' matrix to quantify the agreement between the observed and simulated sets of Principal Components (PCs). We find good agreement, especially for the first three most significant PCs. We also compare the coefficients of the PCs decomposition. While there are slight differences for some coefficients, we find that the distributions are in good agreement. Together, our results show that the galaxy population model derived from broad-band photometry is in good overall agreement with the PAUS data. This offers good prospect for incorporating spectral information to the galaxy model by adjusting it to the PAUS narrow-band data using forward modeling.

We use 26 million galaxies from the Dark Energy Survey (DES) Year 1 shape catalogs over 1321 deg$^2$ of the sky to produce the most significant measurement of cosmic shear in a galaxy survey to date. We constrain cosmological parameters in both the flat $\Lambda$CDM and $w$CDM models, while also varying the neutrino mass density. These results are shown to be robust using two independent shape catalogs, two independent \photoz\ calibration methods, and two independent analysis pipelines in a blind analysis. We find a 3.5\% fractional uncertainty on $\sigma_8(\Omega_m/0.3)^{0.5} = 0.782^{+0.027}_{-0.027}$ at 68\% CL, which is a factor of 2.5 improvement over the fractional constraining power of our DES Science Verification results. In $w$CDM, we find a 4.8\% fractional uncertainty on $\sigma_8(\Omega_m/0.3)^{0.5} = 0.777^{+0.036}_{-0.038}$ and a dark energy equation-of-state $w=-0.95^{+0.33}_{-0.39}$. We find results that are consistent with previous cosmic shear constraints in $\sigma_8$ -- $\Omega_m$, and see no evidence for disagreement of our weak lensing data with data from the CMB. Finally, we find no evidence preferring a $w$CDM model allowing $w\ne -1$. We expect further significant improvements with subsequent years of DES data, which will more than triple the sky coverage of our shape catalogs and double the effective integrated exposure time per galaxy.

Context. High-contrast exoplanet imaging is a rapidly growing field as can be seen through the significant resources invested. In fact, the detection and characterization of exoplanets through direct imaging is featured at all major ground-based observatories. Aims. We aim to improve the signal-to-noise ratio (SNR) achievable for ground-based, adaptive-optics assisted exoplanet imaging by applying sophisticated post-processing algorithms. In particular, we investigate the benefits of including time domain information. Methods. We introduce a new speckle-suppression technique in data post-processing based on wavelet transformation. This technique explicitly considers the time domain in a given data set (specifically the frequencies of speckle variations and their time dependence) and allows us to filter-out speckle noise. We combine our wavelet-based algorithm with state-of-the-art principal component analysis (PCA) based PSF subtraction routines and apply it to archival data sets of known directly imaged exoplanets. The data sets were obtained in the L filter where the short integration times allow for a sufficiently high temporal sampling of the speckle variations. Results. We demonstrate that improvements in the peak SNR of up to forty to sixty percent can be achieved. We also show that, when combined with wavelet-denoising, the PCA PSF model requires systematically smaller numbers of components for the fit to achieve the highest SNR. The improvement potential is, however, data set dependent or, more specifically, closely linked to the field rotation available in a given data set: larger amounts of rotation allow for a better suppression of the speckle noise. Conclusions. We have demonstrated that by applying advanced data post-processing techniques, the contrast performance in archival high-contrast imaging data sets can be improved.

We present the gauge-invariant formalism of cosmological weak lensing, accounting for all the relativistic effects due to the scalar, vector, and tensor perturbations at the linear order. While the light propagation is fully described by the geodesic equation, the relation of the photon wavevector to the physical quantities requires the specification of the frames, where they are defined. By constructing the local tetrad bases at the observer and the source positions, we clarify the relation of the weak lensing observables such as the convergence, the shear, and the rotation to the physical size and shape defined in the source rest-frame and the observed angle and redshift measured in the observer rest-frame. Compared to the standard lensing formalism, additional relativistic effects contribute to all the lensing observables. We explicitly verify the gauge-invariance of the lensing observables and compare our results to previous work. In particular, we demonstrate that even in the presence of the vector and tensor perturbations, the physical rotation of the lensing observables vanishes at the linear order, while the tetrad basis rotates along the light propagation compared to a FRW coordinate. Though the latter is often used as a probe of primordial gravitational waves, the rotation of the tetrad basis is indeed not a physical observable. We further clarify its relation to the E-B decomposition in weak lensing. Our formalism provides a transparent and comprehensive perspective of cosmological weak lensing.

We study the distribution of dark matter in the nonlinear regime in a model in which the primordial fluctuations include, in addition to the dominant primordial Gaussian fluctuations generated by the standard $\Lambda CDM$ cosmological model, the effects of a cosmic string wake set up at the time of equal matter and radiation, making use of cosmological $N$-body simulations. At early times the string wake leads to a planar overdensity of dark matter. We study how this non-Gaussian pattern of a cosmic string wake evolves in the presence of the Gaussian perturbations, making use of wavelet and ridgelet-like statistics specifically designed to extract string wake signals. At late times the Gaussian fluctuations disrupt the string wake. We find that for a string tension of $G \mu = 10^{-7}$, a value just below the current observational limit, the effects of a string wake can be identified in the dark matter distribution, using the current level of the statistical analysis, down to a redshift of $z = 10$.

Upcoming weak lensing surveys will probe large fractions of the sky with unprecedented accuracy. To infer cosmological constraints, a large ensemble of survey simulations are required to accurately model cosmological observables and their covariances. We develop a parallelized multi-lens-plane pipeline called UFalcon, designed to generate full-sky weak lensing maps from lightcones within a minimal runtime. It makes use of L-PICOLA, an approximate numerical code, which provides a fast and accurate alternative to cosmological $N$-Body simulations. The UFalcon maps are constructed by nesting 2 simulations covering a redshift-range from $z=0.1$ to $1.5$ without replicating the simulation volume. We compute the convergence and projected overdensity maps for L-PICOLA in the lightcone or snapshot mode. The generation of such a map, including the L-PICOLA simulation, takes about 3 hours walltime on 220 cores. We use the maps to calculate the spherical harmonic power spectra, which we compare to theoretical predictions and to UFalcon results generated using the full $N$-Body code GADGET-2. We then compute the covariance matrix of the full-sky spherical harmonic power spectra using 150 UFalcon maps based on L-PICOLA in lightcone mode. We consider the PDF, the higher-order moments and the variance of the smoothed field variance to quantify the accuracy of the covariance matrix, which we find to be a few percent for scales $\ell \sim 10^2$ to $10^3$. We test the impact of this level of accuracy on cosmological constraints using an optimistic survey configuration, and find that the final results are robust to this level of uncertainty. The speed and accuracy of our developed pipeline provides a basis to also include further important features such as masking, varying noise and will allow us to compute covariance matrices for models beyond $\Lambda$CDM. [abridged]

We explore a new technique to measure cosmic shear using Einstein rings. In Birrer et al. (2017), we showed that the detailed modelling of Einstein rings can be used to measure external shear to high precision. In this letter, we explore how a collection of Einstein rings can be used as a statistical probe of cosmic shear. We present a forecast of the cosmic shear information available in Einstein rings for different strong lensing survey configurations. We find that, assuming that the number density of Einstein rings in the COSMOS survey is representative, future strong lensing surveys should have a cosmological precision comparable to the current ground based weak lensing surveys. We discuss how this technique is complementary to the standard cosmic shear analyses since it is sensitive to different systematic and can be used for cross-calibration.

Ground-based observations at thermal infrared wavelengths suffer from large background radiation due to the sky, telescope and warm surfaces in the instrument. This significantly limits the sensitivity of ground-based observations at wavelengths longer than 3 microns. We analyzed this background emission in infrared high contrast imaging data, show how it can be modelled and subtracted and demonstrate that it can improve the detection of faint sources, such as exoplanets. We applied principal component analysis to model and subtract the thermal background emission in three archival high contrast angular differential imaging datasets in the M and L filter. We describe how the algorithm works and explain how it can be applied. The results of the background subtraction are compared to the results from a conventional mean background subtraction scheme. Finally, both methods for background subtraction are also compared by performing complete data reductions. We analyze the results from the M dataset of HD100546 qualitatively. For the M band dataset of beta Pic and the L band dataset of HD169142, which was obtained with an annular groove phase mask vortex vector coronagraph, we also calculate and analyze the achieved signal to noise (S/N). We show that applying PCA is an effective way to remove spatially and temporarily varying thermal background emission down to close to the background limit. The procedure also proves to be very successful at reconstructing the background that is hidden behind the PSF. In the complete data reductions, we find at least qualitative improvements for HD100546 and HD169142, however, we fail to find a significant increase in S/N of beta Pic b. We discuss these findings and argue that in particular datasets with strongly varying observing conditions or infrequently sampled sky background will benefit from the new approach.

We report the discovery, spectroscopic confirmation and first lens models of the first two, strongly lensed quasars from a combined search in WISE and Gaia over the DES footprint. The four-image lensWGD2038-4008 (r.a.=20:38:02.65, dec.=-40:08:14.64) has source- and lens-redshifts $z_{s}=0.777 \pm 0.001$ and $z_l = 0.230 \pm 0.002$ respectively. Its deflector has effective radius $R_{\rm eff} \approx 3.4^{\prime\prime}$, stellar mass $\log(M_{\star}/M_{\odot}) = 11.64^{+0.20}_{-0.43}$, and shows extended isophotal shape variation. Simple lens models yield Einstein radii $R_{\rm E}=(1.30\pm0.04)^{\prime\prime},$ axis ratio $q=0.75\pm0.1$ (compatible with that of the starlight) and considerable shear-ellipticity degeneracies. The two-image lensWGD2021-4115 (r.a.=20:21:39.45, dec.=--41:15:57.11) has $z_{s}=1.390\pm0.001$ and $z_l = 0.335 \pm 0.002$, and Einstein radius $R_{\rm E} = (1.1\pm0.1)^{\prime\prime},$ but higher-resolution imaging is needed to accurately separate the deflector and faint quasar image. We also show high-rank candidate doubles selected this way, some of which have been independently identified with different techniques, and discuss a DES+WISE quasar multiplet selection.

Assessing the consistency of parameter constraints derived from different cosmological probes is an important way to test the validity of the underlying cosmological model. In an earlier work [Nicola et al., 2017], we computed constraints on cosmological parameters for $\Lambda$CDM from an integrated analysis of CMB temperature anisotropies and CMB lensing from Planck, galaxy clustering and weak lensing from SDSS, weak lensing from DES SV as well as Type Ia supernovae and Hubble parameter measurements. In this work, we extend this analysis and quantify the concordance between the derived constraints and those derived by the Planck Collaboration as well as WMAP9, SPT and ACT. As a measure for consistency, we use the Surprise statistic [Seehars et al., 2014], which is based on the relative entropy. In the framework of a flat $\Lambda$CDM cosmological model, we find all data sets to be consistent with one another at a level of less than 1$\sigma$. We highlight that the relative entropy is sensitive to inconsistencies in the models that are used in different parts of the analysis. In particular, inconsistent assumptions for the neutrino mass break its invariance on the parameter choice. When consistent model assumptions are used, the data sets considered in this work all agree with each other and $\Lambda$CDM, without evidence for tensions.

We present a measurement of galaxy-galaxy lensing around a magnitude-limited ($i_{AB} < 22.5$) sample of galaxies from the Dark Energy Survey Science Verification (DES-SV) data. We split these lenses into three photometric-redshift bins from 0.2 to 0.8, and determine the product of the galaxy bias $b$ and cross-correlation coefficient between the galaxy and dark matter overdensity fields $r$ in each bin, using scales above 4 Mpc/$h$ comoving, where we find the linear bias model to be valid given our current uncertainties. We compare our galaxy bias results from galaxy-galaxy lensing with those obtained from galaxy clustering (Crocce et al. 2016) and CMB lensing (Giannantonio et al. 2016) for the same sample of galaxies, and find our measurements to be in good agreement with those in Crocce et al. (2016), while, in the lowest redshift bin ($z\sim0.3$), they show some tension with the findings in Giannantonio et al. (2016). We measure $b\cdot r$ to be $0.87\pm 0.11$, $1.12 \pm 0.16$ and $1.24\pm 0.23$, respectively for the three redshift bins of width $\Delta z = 0.2$ in the range $0.2<z <0.8$, defined with the photometric-redshift algorithm BPZ. Using a different code to split the lens sample, TPZ, leads to changes in the measured biases at the 10-20\% level, but it does not alter the main conclusion of this work: when comparing with Crocce et al. (2016) we do not find strong evidence for a cross-correlation parameter significantly below one in this galaxy sample, except possibly at the lowest redshift bin ($z\sim 0.3$), where we find $r = 0.71 \pm 0.11$ when using TPZ, and $0.83 \pm 0.12$ with BPZ.

As wide-field surveys yield ever more precise measurements, cosmology has entered a phase of high precision requiring highly accurate and fast theoretical predictions. At the heart of most cosmological model predictions is a numerical solution of the Einstein-Boltzmann equations governing the evolution of linear perturbations in the Universe. We present PyCosmo, a new Python-based framework to solve this set of equations using a special pur- pose solver based on symbolic manipulations, automatic generation of C++ code and sparsity optimisation. The code uses a consistency relation of the field equations to adapt the time step and does not rely on physical approximations for speed-up. After reviewing the system of first-order linear homogeneous differential equations to be solved, we describe the numerical scheme implemented in PyCosmo. We then compare the predictions and performance of the code for the computation of the transfer functions of cosmological perturbations and compare it to existing cosmological Boltzmann codes. We find that we achieve comparable execution times for comparable accuracies. While PyCosmo does not yet have all the features of other codes, our approach is complementary to existing cosmological Boltzmann solvers and can be used as an independent test of their numerical solutions. The symbolic representation of the Einstein-Boltzmann equation system in PyCosmo provides a convenient interface for implementing extended cosmological models. We also discuss how the PyCosmo framework can also be used as a general framework to compute cosmological quantities as well as observables for both interactive and high-performance batch jobs applications. Information about the PyCosmo package and future code releases are available at http://www.cosmology.ethz.ch/research/software-lab.html.

Determining the redshift distribution $n(z)$ of galaxy samples is essential for several cosmological probes including weak lensing. For imaging surveys, this is usually done using photometric redshifts estimated on an object-by-object basis. We present a new approach for directly measuring the global $n(z)$ of cosmological galaxy samples, including uncertainties, using forward modeling. Our method relies on image simulations produced using UFig (Ultra Fast Image Generator) and on ABC (Approximate Bayesian Computation) within the $MCCL$ (Monte-Carlo Control Loops) framework. The galaxy population is modeled using parametric forms for the luminosity functions, spectral energy distributions, sizes and radial profiles of both blue and red galaxies. We apply exactly the same analysis to the real data and to the simulated images, which also include instrumental and observational effects. By adjusting the parameters of the simulations, we derive a set of acceptable models that are statistically consistent with the data. We then apply the same cuts to the simulations that were used to construct the target galaxy sample in the real data. The redshifts of the galaxies in the resulting simulated samples yield a set of $n(z)$ distributions for the acceptable models. We demonstrate the method by determining $n(z)$ for a cosmic shear like galaxy sample from the 4-band Subaru Suprime-Cam data in the COSMOS field. We also complement this imaging data with a spectroscopic calibration sample from the VVDS survey. We compare our resulting posterior $n(z)$ distributions to the one derived from photometric redshifts estimated using 36 photometric bands in COSMOS and find good agreement. This offers good prospects for applying our approach to current and future large imaging surveys.

Approximate Bayesian Computation (ABC) is a method to obtain a posterior distribution without a likelihood function, using simulations and a set of distance metrics. For that reason, it has recently been gaining popularity as an analysis tool in cosmology and astrophysics. Its drawback, however, is a slow convergence rate. We propose a novel method, which we call qABC, to accelerate ABC with Quantile Regression. In this method, we create a model of quantiles of distance measure as a function of input parameters. This model is trained on a small number of simulations and estimates which regions of the prior space are likely to be accepted into the posterior. Other regions are then immediately rejected. This procedure is then repeated as more simulations are available. We apply it to the practical problem of estimation of redshift distribution of cosmological samples, using forward modelling developed in previous work. The qABC method converges to nearly same posterior as the basic ABC. It uses, however, only 20\% of the number of simulations compared to basic ABC, achieving a fivefold gain in execution time for our problem. For other problems the acceleration rate may vary; it depends on how close the prior is to the final posterior. We discuss possible improvements and extensions to this method.

Weak Gravitational Lensing is a powerful probe of the dark sector of the Universe. One of the main challenges for this technique is the treatment of systematics in the measurement of cosmic shear from galaxy shapes. In an earlier work, Refregier & Amara (2014) have proposed the Monte Carlo Control Loops (MCCL) to overcome these effects using a forward modeling approach. We focus here on one of the control loops in this method, the task of which is the calibration of the shear measurement. For this purpose, we first consider the requirements on the shear systematics for a given survey and propagate them to different systematics terms. We use two one-point statistics to calibrate the shear measurement and six further one-point statistics as diagnostics. We also propagate the systematics levels that we estimate from the one-point functions to the two-point functions for the different systematic error sources. This allows us to assess the consistency between the systematics levels measured in different ways. To test the method, we construct synthetic sky surveys with an area of 1,700 deg$^2$. With some simplifying assumptions, we are able to meet the requirements on the shear calibration for this survey configuration. Furthermore, we account for the total residual shear systematics in terms of the contributing sources. We discuss how this MCCL framework can be applied to current and future weak lensing surveys.

We demonstrate the potential of Deep Learning methods for measurements of cosmological parameters from density fields, focusing on the extraction of non-Gaussian information. We consider weak lensing mass maps as our dataset. We aim for our method to be able to distinguish between five models, which were chosen to lie along the $\sigma_8$ - $\Omega_m$ degeneracy, and have nearly the same two-point statistics. We design and implement a Deep Convolutional Neural Network (DCNN) which learns the relation between five cosmological models and the mass maps they generate. We develop a new training strategy which ensures the good performance of the network for high levels of noise. We compare the performance of this approach to commonly used non-Gaussian statistics, namely the skewness and kurtosis of the convergence maps. We find that our implementation of DCNN outperforms the skewness and kurtosis statistics, especially for high noise levels. The network maintains the mean discrimination efficiency greater than $85\%$ even for noise levels corresponding to ground based lensing observations, while the other statistics perform worse in this setting, achieving efficiency less than $70\%$. This demonstrates the ability of CNN-based methods to efficiently break the $\sigma_8$ - $\Omega_m$ degeneracy with weak lensing mass maps alone. We discuss the potential of this method to be applied to the analysis of real weak lensing data and other datasets.

We fit a log-normal function to the M dwarf orbital surface density distribution of gas giant planets, over the mass range 1-10 times that of Jupiter, from 0.07-400 AU. We use a Markov Chain Monte Carlo approach to explore the likelihoods of various parameter values consistent with point estimates of the data given our assumed functional form. This fit is consistent with radial velocity, microlensing, and direct imaging observations, is well-motivated from theoretical and phenomenological viewpoints, and makes predictions of future surveys. We present probability distributions for each parameter as well as a Maximum Likelihood Estimate solution. We suggest this function makes more physical sense than other widely used functions, and explore the implications of our results on the design of future exoplanet surveys.

We report on SPT-CLJ2011-5228, a giant system of arcs created by a cluster at $z=1.06$. The arc system is notable for the presence of a bright central image. The source is a Lyman Break galaxy at $z_s=2.39$ and the mass enclosed within the 14 arc second radius Einstein ring is $10^{14.2}$ solar masses. We perform a full light profile reconstruction of the lensed images to precisely infer the parameters of the mass distribution. The brightness of the central image demands that the central total density profile of the lens be shallow. By fitting the dark matter as a generalized Navarro-Frenk-White profile---with a free parameter for the inner density slope---we find that the break radius is $270^{+48}_{-76}$ kpc, and that the inner density falls with radius to the power $-0.38\pm0.04$ at 68 percent confidence. Such a shallow profile is in strong tension with our understanding of relaxed cold dark matter halos; dark matter only simulations predict the inner density should fall as $r^{-1}$. The tension can be alleviated if this cluster is in fact a merger; a two halo model can also reconstruct the data, with both clumps (density going as $r^{-0.8}$ and $r^{-1.0}$) much more consistent with predictions from dark matter only simulations. At the resolution of our Dark Energy Survey imaging, we are unable to choose between these two models, but we make predictions for forthcoming Hubble Space Telescope imaging that will decisively distinguish between them.

We study the substructure content of the strong gravitational lens RXJ1131-1231 through a forward modelling approach that relies on generating an extensive suite of realistic simulations. We use a semi-analytic merger tree prescription that allows us to stochastically generate substructure populations whose properties depend on the dark matter particle mass. These synthetic halos are then used as lenses to produce realistic mock images that have the same features, e.g. luminous arcs, quasar positions, instrumental noise and PSF, as the data. We then analyse the data and the simulations in the same way with summary statistics that are sensitive to the signal being targeted and are able to constrain models of dark matter statistically using Approximate Bayesian Computing (ABC) techniques. In this work, we focus on the thermal relic mass estimate and fix the semi-analytic descriptions of the substructure evolution based on recent literature. We are able, based on the HST data for RXJ1131-1231, to rule out a warm dark matter thermal relic mass below 2 keV at the 2$\sigma$ confidence level.

We present the first constraints on cosmology from the Dark Energy Survey (DES), using weak lensing measurements from the preliminary Science Verification (SV) data. We use 139 square degrees of SV data, which is less than 3\% of the full DES survey area. Using cosmic shear 2-point measurements over three redshift bins we find $\sigma_8 (\Omega_{\rm m}/0.3)^{0.5} = 0.81 \pm 0.06$ (68\% confidence), after marginalising over 7 systematics parameters and 3 other cosmological parameters. We examine the robustness of our results to the choice of data vector and systematics assumed, and find them to be stable. About $20$\% of our error bar comes from marginalising over shear and photometric redshift calibration uncertainties. The current state-of-the-art cosmic shear measurements from CFHTLenS are mildly discrepant with the cosmological constraints from Planck CMB data; our results are consistent with both datasets. Our uncertainties are $\sim$30\% larger than those from CFHTLenS when we carry out a comparable analysis of the two datasets, which we attribute largely to the lower number density of our shear catalogue. We investigate constraints on dark energy and find that, with this small fraction of the full survey, the DES SV constraints make negligible impact on the Planck constraints. The moderate disagreement between the CFHTLenS and Planck values of $\sigma_8 (\Omega_{\rm m}/0.3)^{0.5}$ is present regardless of the value of $w$.

We use weak-lensing shear measurements to determine the mean mass of optically selected galaxy clusters in Dark Energy Survey Science Verification data. In a blinded analysis, we split the sample of more than 8,000 redMaPPer clusters into 15 subsets, spanning ranges in the richness parameter $5 \leq \lambda \leq 180$ and redshift $0.2 \leq z \leq 0.8$, and fit the averaged mass density contrast profiles with a model that accounts for seven distinct sources of systematic uncertainty: shear measurement and photometric redshift errors; cluster-member contamination; miscentering; deviations from the NFW halo profile; halo triaxiality; and line-of-sight projections. We combine the inferred cluster masses to estimate the joint scaling relation between mass, richness and redshift, $\mathcal{M}(\lambda,z) \varpropto M_0 \lambda^{F} (1+z)^{G}$. We find $M_0 \equiv \langle M_{200\mathrm{m}}\,|\,\lambda=30,z=0.5\rangle=\left[ 2.35 \pm 0.22\ \rm{(stat)} \pm 0.12\ \rm{(sys)} \right] \cdot 10^{14}\ M_\odot$, with $F = 1.12\,\pm\,0.20\ \rm{(stat)}\, \pm\, 0.06\ \rm{(sys)}$ and $G = 0.18\,\pm\, 0.75\ \rm{(stat)}\, \pm\, 0.24\ \rm{(sys)}$. The amplitude of the mass-richness relation is in excellent agreement with the weak-lensing calibration of redMaPPer clusters in SDSS by Simet et al. (2016) and with the Saro et al. (2015) calibration based on abundance matching of SPT-detected clusters. Our results extend the redshift range over which the mass-richness relation of redMaPPer clusters has been calibrated with weak lensing from $z\leq 0.3$ to $z\leq0.8$. Calibration uncertainties of shear measurements and photometric redshift estimates dominate our systematic error budget and require substantial improvements for forthcoming studies.

We present a simple method to accurately infer line of sight (LOS) integrated lensing effects for galaxy scale strong lens systems through image reconstruction. Our approach enables us to separate weak lensing LOS effects from the main strong lens deflector. We test our method using mock data and show that strong lens systems can be accurate probes of cosmic shear with a precision on the shear terms of $\pm 0.003$ (statistical error) for an HST-like dataset. We apply our formalism to reconstruct the lens COSMOS 0038+4133 and its LOS. In addition, we estimate the LOS properties with a halo-rendering estimate based on the COSMOS field galaxies and a galaxy-halo connection. The two approaches are independent and complementary in their information content. We find that when estimating the convergence at the strong lens system, performing a joint analysis improves the measure by a factor of two compared to a halo model only analysis. Furthermore the constraints of the strong lens reconstruction lead to tighter constraints on the halo masses of the LOS galaxies. Joint constraints of multiple strong lens systems may add valuable information to the galaxy-halo connection and may allow independent weak lensing shear measurement calibrations.

We extend the results of previous analyses towards constraining the abundance and clustering of post-reionization ($z \sim 0-5$) neutral hydrogen (HI) systems using a halo model framework. We work with a comprehensive HI dataset including the small-scale clustering, column density and mass function of HI galaxies at low redshifts, intensity mapping measurements at intermediate redshifts and the UV/optical observations of Damped Lyman Alpha (DLA) systems at higher redshifts. We use a Markov Chain Monte Carlo (MCMC) approach to constrain the parameters of the best-fitting models, both for the HI-halo mass relation and the HI radial density profile. We find that a radial exponential profile results in a good fit to the low-redshift HI observations, including the clustering and the column density distribution. The form of the profile is also found to match the high-redshift DLA observations, when used in combination with a three-parameter HI-halo mass relation and a redshift evolution in the HI concentration. The halo model predictions are in good agreement with the observed HI surface density profiles of low-redshift galaxies, and the general trends in the the impact parameter and covering fraction observations of high-redshift DLAs. We provide convenient tables summarizing the best-fit halo model predictions.

Recent progress in cosmology has relied on combining different cosmological probes. In earlier work, we implemented an integrated approach to cosmology where the probes are combined into a common framework at the map level. This has the advantage of taking full account of the correlations between the different probes, to provide a stringent test of systematics and of the validity of the cosmological model. We extend this analysis to include not only CMB temperature, galaxy clustering, weak lensing from SDSS but also CMB lensing, weak lensing from the DES SV survey, Type Ia SNe and $H_{0}$ measurements. This yields 12 auto- and cross-power spectra as well as background probes. Furthermore, we extend the treatment of systematic uncertainties. For $\Lambda$CDM, we find results that are consistent with our earlier work. Given our enlarged data set and systematics treatment, this confirms the robustness of our analysis and results. Furthermore, we find that our best-fit cosmological model gives a good fit to the data we consider with no signs of tensions within our analysis. We also find our constraints to be consistent with those found by WMAP9, SPT and ACT and the KiDS weak lensing survey. Comparing with the Planck Collaboration results, we see a broad agreement, but there are indications of a tension from the marginalized constraints in most pairs of cosmological parameters. Since our analysis includes CMB temperature Planck data at $10 < \ell < 610$, the tension appears to arise between the Planck high$-\ell$ and the other measurements. Furthermore, we find the constraints on the probe calibration parameters to be in agreement with expectations, showing that the data sets are mutually consistent. In particular, this yields a confirmation of the amplitude calibration of the weak lensing measurements from SDSS, DES SV and Planck CMB lensing from our integrated analysis. [abridged]

We present gravitational lens models of the multiply imaged quasar DES J0408-5354, recently discovered in the Dark Energy Survey (DES) footprint, with the aim of interpreting its remarkable quad-like configuration. We first model the DES single-epoch $grizY$ images as a superposition of a lens galaxy and four point-like objects, obtaining spectral energy distributions (SEDs) and relative positions for the objects. Three of the point sources (A,B,D) have SEDs compatible with the discovery quasar spectra, while the faintest point-like image (G2/C) shows significant reddening and a `grey' dimming of $\approx0.8$mag. In order to understand the lens configuration, we fit different models to the relative positions of A,B,D. Models with just a single deflector predict a fourth image at the location of G2/C but considerably brighter and bluer. The addition of a small satellite galaxy ($R_{\rm E}\approx0.2$") in the lens plane near the position of G2/C suppresses the flux of the fourth image and can explain both the reddening and grey dimming. All models predict a main deflector with Einstein radius between $1.7"$ and $2.0",$ velocity dispersion $267-280$km/s and enclosed mass $\approx 6\times10^{11}M_{\odot},$ even though higher resolution imaging data are needed to break residual degeneracies in model parameters. The longest time-delay (B-A) is estimated as $\approx 85$ (resp. $\approx125$) days by models with (resp. without) a perturber near G2/C. The configuration and predicted time-delays of J0408-5354 make it an excellent target for follow-up aimed at understanding the source quasar host galaxy and substructure in the lens, and measuring cosmological parameters. We also discuss some lessons learnt from J0408-5354 on lensed quasar finding strategies, due to its chromaticity and morphology.

We report the discovery and spectroscopic confirmation of the quad-like lensed quasar system DES J0408-5354 found in the Dark Energy Survey (DES) Year 1 (Y1) data. This system was discovered during a search for DES Y1 strong lensing systems using a method that identified candidates as red galaxies with multiple blue neighbors. DES J0408-5354 consists of a central red galaxy surrounded by three bright (i < 20) blue objects and a fourth red object. Subsequent spectroscopic observations using the Gemini South telescope confirmed that the three blue objects are indeed the lensed images of a quasar with redshift z = 2.375, and that the central red object is an early-type lensing galaxy with redshift z = 0.597. DES J0408-5354 is the first quad lensed quasar system to be found in DES and begins to demonstrate the potential of DES to discover and dramatically increase the sample size of these very rare objects.

As several large single-dish radio surveys begin operation within the coming decade, a wealth of radio data will become available and provide a new window to the Universe. In order to fully exploit the potential of these data sets, it is important to understand the systematic effects associated with the instrument and the analysis pipeline. A common approach to tackle this is to forward-model the entire system - from the hardware to the analysis of the data products. For this purpose, we introduce two newly developed, open-source Python packages: the HI Data Emulator (HIDE) and the Signal Extraction and Emission Kartographer (SEEK) for simulating and processing single-dish radio survey data. HIDE forward-models the process of collecting astronomical radio signals in a single-dish radio telescope instrument and outputs pixel-level time-ordered-data. SEEK processes the time-ordered-data, removes artifacts from Radio Frequency Interference (RFI), automatically applies flux calibration, and aims to recover the astronomical radio signal. The two packages can be used separately or together depending on the application. Their modular and flexible nature allows easy adaptation to other instruments and data sets. We describe the basic architecture of the two packages and examine in detail the noise and RFI modeling in HIDE, as well as the implementation of gain calibration and RFI mitigation in SEEK. We then apply HIDE & SEEK to forward-model a Galactic survey in the frequency range 990 - 1260 MHz based on data taken at the Bleien Observatory. For this survey, we expect to cover 70% of the full sky and achieve a median signal-to-noise ratio of approximately 5 - 6 in the cleanest channels including systematic uncertainties. However, we also point out the potential challenges of high RFI contamination and baseline removal when examining the early data from the Bleien Observatory.

Galaxies and their dark matter halos populate a complicated filamentary network around large, nearly empty regions known as cosmic voids. Cosmic voids are usually identified in spectroscopic galaxy surveys, where 3D information about the large-scale structure of the Universe is available. Although an increasing amount of photometric data is being produced, its potential for void studies is limited since photometric redshifts induce line-of-sight position errors of $\sim50$ Mpc/$h$ or more that can render many voids undetectable. In this paper we present a new void finder designed for photometric surveys, validate it using simulations, and apply it to the high-quality photo-$z$ redMaGiC galaxy sample of the Dark Energy Survey Science Verification (DES-SV) data. The algorithm works by projecting galaxies into 2D slices and finding voids in the smoothed 2D galaxy density field of the slice. Fixing the line-of-sight size of the slices to be at least twice the photo-$z$ scatter, the number of voids found in these projected slices of simulated spectroscopic and photometric galaxy catalogs is within 20% for all transverse void sizes, and indistinguishable for the largest voids of radius $\sim 70$ Mpc/$h$ and larger. The positions, radii, and projected galaxy profiles of photometric voids also accurately match the spectroscopic void sample. Applying the algorithm to the DES-SV data in the redshift range $0.2<z<0.8$, we identify 87 voids with comoving radii spanning the range 18-120 Mpc/$h$, and carry out a stacked weak lensing measurement. With a significance of $4.4\sigma$, the lensing measurement confirms the voids are truly underdense in the matter field and hence not a product of Poisson noise, tracer density effects or systematics in the data. It also demonstrates, for the first time in real data, the viability of void lensing studies in photometric surveys.

Recent observational progress has led to the establishment of the standard $\Lambda$CDM model for cosmology. This development is based on different cosmological probes that are usually combined through their likelihoods at the latest stage in the analysis. We implement here an integrated scheme for cosmological probes, which are combined in a common framework starting at the map level. This treatment is necessary as the probes are generally derived from overlapping maps and are thus not independent. It also allows for a thorough test of the cosmological model and of systematics through the consistency of different physical tracers. As a first application, we combine current measurements of the Cosmic Microwave Background (CMB) from the Planck satellite, and galaxy clustering and weak lensing from SDSS. We consider the spherical harmonic power spectra of these probes including all six auto- and cross-correlations along with the associated full Gaussian covariance matrix. This provides an integrated treatment of different analyses usually performed separately including CMB anisotropies, cosmic shear, galaxy clustering, galaxy-galaxy lensing and the Integrated Sachs-Wolfe (ISW) effect with galaxy and shear tracers. We derive constraints on $\Lambda$CDM parameters that are compatible with existing constraints and highlight tensions between data sets, which become apparent in this integrated treatment. We discuss how this approach provides a complete and powerful integrated framework for probe combination and how it can be extended to include other tracers in the context of current and future wide field cosmological surveys.

We use wavelet and curvelet transforms to extract signals of cosmic strings from cosmic microwave background (CMB) temperature anisotropy maps, and to study the limits on the cosmic string tension which various ongoing CMB temperature anisotropy experiments will be able to achieve. We construct sky maps with size and angular resolution corresponding to various experiments. These maps contain the signals of a scaling solution of long string segments with a given string tension $G \mu$, the contribution of the dominant Gaussian primordial cosmological fluctuations, and pixel by pixel white noise with an amplitude corresponding to the instrumental noise of the various experiments. In the case that we include white noise, we find that the curvelets are more powerful than wavelets. For maps with Planck specification, we obtain bounds on the string tension comparable to what was obtained by the Planck collaboration. Experiments with better angular resolution such as the South Pole Telescope third generation (SPT-3G) survey will be able to yield stronger limits. For maps with a specification of SPT-3G we find that string signals will be visible down to a string tension of $G \mu = 1.4 \times 10^{-7}$.

This overview article describes the legacy prospect and discovery potential of the Dark Energy Survey (DES) beyond cosmological studies, illustrating it with examples from the DES early data. DES is using a wide-field camera (DECam) on the 4m Blanco Telescope in Chile to image 5000 sq deg of the sky in five filters (grizY). By its completion the survey is expected to have generated a catalogue of 300 million galaxies with photometric redshifts and 100 million stars. In addition, a time-domain survey search over 27 sq deg is expected to yield a sample of thousands of Type Ia supernovae and other transients. The main goals of DES are to characterise dark energy and dark matter, and to test alternative models of gravity; these goals will be pursued by studying large scale structure, cluster counts, weak gravitational lensing and Type Ia supernovae. However, DES also provides a rich data set which allows us to study many other aspects of astrophysics. In this paper we focus on additional science with DES, emphasizing areas where the survey makes a difference with respect to other current surveys. The paper illustrates, using early data (from `Science Verification', and from the first, second and third seasons of observations), what DES can tell us about the solar system, the Milky Way, galaxy evolution, quasars, and other topics. In addition, we show that if the cosmological model is assumed to be Lambda+ Cold Dark Matter (LCDM) then important astrophysics can be deduced from the primary DES probes. Highlights from DES early data include the discovery of 34 Trans Neptunian Objects, 17 dwarf satellites of the Milky Way, one published z > 6 quasar (and more confirmed) and two published superluminous supernovae (and more confirmed).

We present extended modeling of the strong lens system RXJ1131-1231 with archival data in two HST bands in combination with existing line-of-sight contribution and velocity dispersion estimates. Our focus is on source size and its influence on time-delay cosmography. We therefore examine the impact of mass-sheet degeneracy and especially the degeneracy pointed out by Schneider & Sluse (2013) using the source reconstruction scale. We also extend on previous work by further exploring the effects of priors on the kinematics of the lens and the external convergence in the environment of the lensing system. Our results coming from RXJ1131-1231 are given in a simple analytic form so that they can be easily combined with constraints coming from other cosmological probes. We find that the choice of priors on lens model parameters and source size are subdominant for the statistical errors for $H_0$ measurements of this systems. The choice of prior for the source is sub-dominant at present (2% uncertainty on $H_0$) but may be relevant for future studies. More importantly, we find that the priors on the kinematic anisotropy of the lens galaxy have a significant impact on our cosmological inference. When incorporating all the above modeling uncertainties, we find $H_0 = 86.6^{+6.8}_{-6.9}$ km s$^{-1}$Mpc$^{-1}$, when using kinematic priors similar to other studies. When we use a different kinematic prior motivated by Barnab\`e et al. (2012) but covering the same anisotropic range, we find $H_0 = 74.5^{+8.0}_{-7.8}$ km s$^{-1}$Mpc$^{-1}$. This means that the choice of kinematic modeling and priors have a significant impact on cosmographic inferences. The way forward is either to get better velocity dispersion measures which would down weight the impact of the priors or to construct physically motivated priors for the velocity dispersion model.

Cosmic shear is sensitive to fluctuations in the cosmological matter density field, including on small physical scales, where matter clustering is affected by baryonic physics in galaxies and galaxy clusters, such as star formation, supernovae feedback and AGN feedback. While muddying any cosmological information that is contained in small scale cosmic shear measurements, this does mean that cosmic shear has the potential to constrain baryonic physics and galaxy formation. We perform an analysis of the Dark Energy Survey (DES) Science Verification (SV) cosmic shear measurements, now extended to smaller scales, and using the Mead et al. 2015 halo model to account for baryonic feedback. While the SV data has limited statistical power, we demonstrate using a simulated likelihood analysis that the final DES data will have the statistical power to differentiate among baryonic feedback scenarios. We also explore some of the difficulties in interpreting the small scales in cosmic shear measurements, presenting estimates of the size of several other systematic effects that make inference from small scales difficult, including uncertainty in the modelling of intrinsic alignment on nonlinear scales, `lensing bias', and shape measurement selection effects. For the latter two, we make use of novel image simulations. While future cosmic shear datasets have the statistical power to constrain baryonic feedback scenarios, there are several systematic effects that require improved treatments, in order to make robust conclusions about baryonic feedback.

We present measurements of weak gravitational lensing cosmic shear two-point statistics using Dark Energy Survey Science Verification data. We demonstrate that our results are robust to the choice of shear measurement pipeline, either ngmix or im3shape, and robust to the choice of two-point statistic, including both real and Fourier-space statistics. Our results pass a suite of null tests including tests for B-mode contamination and direct tests for any dependence of the two-point functions on a set of 16 observing conditions and galaxy properties, such as seeing, airmass, galaxy color, galaxy magnitude, etc. We furthermore use a large suite of simulations to compute the covariance matrix of the cosmic shear measurements and assign statistical significance to our null tests. We find that our covariance matrix is consistent with the halo model prediction, indicating that it has the appropriate level of halo sample variance. We compare the same jackknife procedure applied to the data and the simulations in order to search for additional sources of noise not captured by the simulations. We find no statistically significant extra sources of noise in the data. The overall detection significance with tomography for our highest source density catalog is 9.7sigma. Cosmological constraints from the measurements in this work are presented in a companion paper (DES et al. 2015).

We describe the design and performance of the hardware system at the Bleien Observatory. The system is designed to deliver a map of the Galaxy for studying the foreground contamination of low-redshift (z=0.13--0.43) H$_{\rm I}$ intensity mapping experiments as well as other astronomical Galactic studies. This hardware system is composed of a 7m parabolic dish, a dual-polarization corrugated horn feed, a pseudo correlation receiver, a Fast Fourier Transform spectrometer, and an integrated control system that controls and monitors the progress of the data collection. The main innovative designs in the hardware are (1) the pseudo correlation receiver and the cold reference source within (2) the high dynamic range, high frequency resolution spectrometer and (3) the phase-switch implementation of the system. This is the first time these technologies are used together for a L-band radio telescope to achieve an electronically stable system, which is an essential first step for wide-field cosmological measurements. This work demonstrates the prospects and challenges for future H$_{\rm I}$ intensity mapping experiments.

We present a new method to measure the redshift-dependent galaxy bias by combining information from the galaxy density field and the weak lensing field. This method is based on Amara et al. (2012), where they use the galaxy density field to construct a bias-weighted convergence field kg. The main difference between Amara et al. (2012) and our new implementation is that here we present another way to measure galaxy bias using tomography instead of bias parameterizations. The correlation between kg and the true lensing field k allows us to measure galaxy bias using different zero-lag correlations, such as <kgk>/<kk> or <kgkg>/<kgk>. Our method measures the linear bias factor on linear scales under the assumption of no stochasticity between galaxies and matter. We use the MICE simulation to measure the linear galaxy bias for a flux-limited sample (i < 22.5) in tomographic redshift bins using this method. This paper is the first that studies the accuracy and systematic uncertainties associated with the implementation of the method, and the regime where it is consistent with the linear galaxy bias defined by projected 2-point correlation functions (2PCF). We find that our method is consistent with linear bias at the percent level for scales larger than 30 arcmin, while nonlinearities appear at smaller scales. This measurement is a good complement to other measurements of bias, since it does not depend strongly on sigma8 as the 2PCF measurements. We apply this method to the Dark Energy Survey Science Verification data in a follow-up paper.

Quantifying the concordance between different cosmological experiments is important for testing the validity of theoretical models and systematics in the observations. In earlier work, we thus proposed the Surprise, a concordance measure derived from the relative entropy between posterior distributions. We revisit the properties of the Surprise and describe how it provides a general, versatile, and robust measure for the agreement between datasets. We also compare it to other measures of concordance that have been proposed for cosmology. As an application, we extend our earlier analysis and use the Surprise to quantify the agreement between WMAP 9, Planck 13 and Planck 15 constraints on the $\Lambda$CDM model. Using a principle component analysis in parameter space, we find that the large Surprise between WMAP 9 and Planck 13 (S = 17.6 bits, implying a deviation from consistency at 99.8% confidence) is due to a shift along a direction that is dominated by the amplitude of the power spectrum. The Planck 15 constraints deviate from the Planck 13 results (S = 56.3 bits), primarily due to a shift in the same direction. The Surprise between WMAP and Planck consequently disappears when moving to Planck 15 (S = -5.1 bits). This means that, unlike Planck 13, Planck 15 is not in tension with WMAP 9. These results illustrate the advantages of the relative entropy and the Surprise for quantifying the disagreement between cosmological experiments and more generally as an information metric for cosmology.

It is well known that the probability distribution function (PDF) of galaxy density contrast is approximately lognormal; whether the PDF of mass fluctuations derived from weak lensing convergence (kappa_WL) is lognormal is less well established. We derive PDFs of the galaxy and projected matter density distributions via the Counts in Cells (CiC) method. We use maps of galaxies and weak lensing convergence produced from the Dark Energy Survey (DES) Science Verification data over 139 deg^2. We test whether the underlying density contrast is well described by a lognormal distribution for the galaxies, the convergence and their joint PDF. We confirm that the galaxy density contrast distribution is well modeled by a lognormal PDF convolved with Poisson noise at angular scales from 10-40 arcmin (corresponding to physical scales of 3-10 Mpc). We note that as kappa_WL is a weighted sum of the mass fluctuations along the line of sight, its PDF is expected to be only approximately lognormal. We find that the kappa_WL distribution is well modeled by a lognormal PDF convolved with Gaussian shape noise at scales between 10 and 20 arcmin, with a best-fit chi^2/DOF of 1.11 compared to 1.84 for a Gaussian model, corresponding to p-values 0.35 and 0.07 respectively, at a scale of 10 arcmin. Above 20 arcmin a simple Gaussian model is sufficient. The joint PDF is also reasonably fitted by a bivariate lognormal. As a consistency check we compare the variances derived from the lognormal modelling with those directly measured via CiC. Our methods are validated against maps from the MICE Grand Challenge N-body simulation.

We measure the redshift evolution of galaxy bias for a magnitude-limited galaxy sample by combining the galaxy density maps and weak lensing shear maps for a $\sim$116 deg$^{2}$ area of the Dark Energy Survey (DES) Science Verification data. This method was first developed in Amara et al. (2012) and later re-examined in a companion paper (Pujol et al. 2016) with rigorous simulation tests and analytical treatment of tomographic measurements. In this work we apply this method to the DES SV data and measure the galaxy bias for a i$<$22.5 galaxy sample. We find the galaxy bias and 1$\sigma$ error bars in 4 photometric redshift bins to be 1.12$\pm$0.19 (z=0.2-0.4), 0.97$\pm$0.15 (z=0.4-0.6), 1.38$\pm$0.39 (z=0.6-0.8)), and 1.45$\pm$0.56 (z=0.8-1.0). These measurements are consistent at the 2$\sigma$ level with measurements on the same dataset using galaxy clustering and cross-correlation of galaxies with CMB lensing, with most of the redshift bins consistent within the 1{\sigma} error bars. In addition, our method provides the only $\sigma_8$-independent constraint among the three. We forward-model the main observational effects using mock galaxy catalogs by including shape noise, photo-z errors and masking effects. We show that our bias measurement from the data is consistent with that expected from simulations. With the forthcoming full DES data set, we expect this method to provide additional constraints on the galaxy bias measurement from more traditional methods. Furthermore, in the process of our measurement, we build up a 3D mass map that allows further exploration of the dark matter distribution and its relation to galaxy evolution.

We present cosmological constraints from the Dark Energy Survey (DES) using a combined analysis of angular clustering of red galaxies and their cross-correlation with weak gravitational lensing of background galaxies. We use a 139 square degree contiguous patch of DES data from the Science Verification (SV) period of observations. Using large scale measurements, we constrain the matter density of the Universe as Omega_m = 0.31 +/- 0.09 and the clustering amplitude of the matter power spectrum as sigma_8 = 0.74 +/- 0.13 after marginalizing over seven nuisance parameters and three additional cosmological parameters. This translates into S_8 = sigma_8(Omega_m/0.3)^{0.16} = 0.74 +/- 0.12 for our fiducial lens redshift bin at 0.35 <z< 0.5, while S_8 = 0.78 +/- 0.09 using two bins over the range 0.2 <z< 0.5. We study the robustness of the results under changes in the data vectors, modelling and systematics treatment, including photometric redshift and shear calibration uncertainties, and find consistency in the derived cosmological parameters. We show that our results are consistent with previous cosmological analyses from DES and other data sets and conclude with a joint analysis of DES angular clustering and galaxy-galaxy lensing with Planck CMB data, Baryon Accoustic Oscillations and Supernova type Ia measurements.

We present weak lensing shear catalogues for 139 square degrees of data taken during the Science Verification (SV) time for the new Dark Energy Camera (DECam) being used for the Dark Energy Survey (DES). We describe our object selection, point spread function estimation and shear measurement procedures using two independent shear pipelines, IM3SHAPE and NGMIX, which produce catalogues of 2.12 million and 3.44 million galaxies respectively. We detail a set of null tests for the shear measurements and find that they pass the requirements for systematic errors at the level necessary for weak lensing science applications using the SV data. We also discuss some of the planned algorithmic improvements that will be necessary to produce sufficiently accurate shear catalogues for the full 5-year DES, which is expected to cover 5000 square degrees.

In light of the growing number of cosmological observations, it is important to develop versatile tools to quantify the constraining power and consistency of cosmological probes. Originally motivated from information theory, we use the relative entropy to compute the information gained by Bayesian updates in units of bits. This measure quantifies both the improvement in precision and the 'surprise', i.e. the tension arising from shifts in central values. Our starting point is a WMAP9 prior which we update with observations of the distance ladder, supernovae (SNe), baryon acoustic oscillations (BAO), and weak lensing as well as the 2015 Planck release. We consider the parameters of the flat $\Lambda$CDM concordance model and some of its extensions which include curvature and Dark Energy equation of state parameter $w$. We find that, relative to WMAP9 and within these model spaces, the probes that have provided the greatest gains are Planck (10 bits), followed by BAO surveys (5.1 bits) and SNe experiments (3.1 bits). The other cosmological probes, including weak lensing (1.7 bits) and {$\rm H_0$} measures (1.7 bits), have contributed information but at a lower level. Furthermore, we do not find any significant surprise when updating the constraints of WMAP9 with any of the other experiments, meaning that they are consistent with WMAP9. However, when we choose Planck15 as the prior, we find that, accounting for the full multi-dimensionality of the parameter space, the weak lensing measurements of CFHTLenS produce a large surprise of 4.4 bits which is statistically significant at the 8 $\sigma$ level. We discuss how the relative entropy provides a versatile and robust framework to compare cosmological probes in the context of current and future surveys.

Shear peak statistics has gained a lot of attention recently as a practical alternative to the two point statistics for constraining cosmological parameters. We perform a shear peak statistics analysis of the Dark Energy Survey (DES) Science Verification (SV) data, using weak gravitational lensing measurements from a 139 deg$^2$ field. We measure the abundance of peaks identified in aperture mass maps, as a function of their signal-to-noise ratio, in the signal-to-noise range $0<\mathcal S / \mathcal N<4$. To predict the peak counts as a function of cosmological parameters we use a suite of $N$-body simulations spanning 158 models with varying $\Omega_{\rm m}$ and $\sigma_8$, fixing $w = -1$, $\Omega_{\rm b} = 0.04$, $h = 0.7$ and $n_s=1$, to which we have applied the DES SV mask and redshift distribution. In our fiducial analysis we measure $\sigma_{8}(\Omega_{\rm m}/0.3)^{0.6}=0.77 \pm 0.07$, after marginalising over the shear multiplicative bias and the error on the mean redshift of the galaxy sample. We introduce models of intrinsic alignments, blending, and source contamination by cluster members. These models indicate that peaks with $\mathcal S / \mathcal N>4$ would require significant corrections, which is why we do not include them in our analysis. We compare our results to the cosmological constraints from the two point analysis on the SV field and find them to be in good agreement in both the central value and its uncertainty. We discuss prospects for future peak statistics analysis with upcoming DES data.

Intensity mapping of neutral hydrogen (HI) is a promising observational probe of cosmology and large-scale structure. We present wide field simulations of HI intensity maps based on N-body simulations of a $2.6\, {\rm Gpc / h}$ box with $2048^3$ particles (particle mass $1.6 \times 10^{11}\, {\rm M_\odot / h}$). Using a conditional mass function to populate the simulated dark matter density field with halos below the mass resolution of the simulation ($10^{8}\, {\rm M_\odot / h} < M_{\rm halo} < 10^{13}\, {\rm M_\odot / h}$), we assign HI to those halos according to a phenomenological halo to HI mass relation. The simulations span a redshift range of 0.35 < z < 0.9 in redshift bins of width $\Delta z \approx 0.05$ and cover a quarter of the sky at an angular resolution of about 7'. We use the simulated intensity maps to study the impact of non-linear effects and redshift space distortions on the angular clustering of HI. Focusing on the autocorrelations of the maps, we apply and compare several estimators for the angular power spectrum and its covariance. We verify that these estimators agree with analytic predictions on large scales and study the validity of approximations based on Gaussian random fields, particularly in the context of the covariance. We discuss how our results and the simulated maps can be useful for planning and interpreting future HI intensity mapping surveys.

The nature of dark matter, dark energy and large-scale gravity pose some of the most pressing questions in cosmology today. These fundamental questions require highly precise measurements, and a number of wide-field spectroscopic survey instruments are being designed to meet this requirement. A key component in these experiments is the development of a simulation tool to forecast science performance, define requirement flow-downs, optimize implementation, demonstrate feasibility, and prepare for exploitation. We present SPOKES (SPectrOscopic KEn Simulation), an end-to-end simulation facility for spectroscopic cosmological surveys designed to address this challenge. SPOKES is based on an integrated infrastructure, modular function organization, coherent data handling and fast data access. These key features allow reproducibility of pipeline runs, enable ease of use and provide flexibility to update functions within the pipeline. The cyclic nature of the pipeline offers the possibility to make the science output an efficient measure for design optimization and feasibility testing. We present the architecture, first science, and computational performance results of the simulation pipeline. The framework is general, but for the benchmark tests, we use the Dark Energy Spectrometer (DESpec), one of the early concepts for the upcoming project, the Dark Energy Spectroscopic Instrument (DESI). We discuss how the SPOKES framework enables a rigorous process to optimize and exploit spectroscopic survey experiments in order to derive high-precision cosmological measurements optimally.

We measure the cross-correlation between weak lensing of galaxy images and of the cosmic microwave background (CMB). The effects of gravitational lensing on different sources will be correlated if the lensing is caused by the same mass fluctuations. We use galaxy shape measurements from 139 deg$^{2}$ of the Dark Energy Survey (DES) Science Verification data and overlapping CMB lensing from the South Pole Telescope (SPT) and Planck. The DES source galaxies have a median redshift of $z_{\rm med} {\sim} 0.7$, while the CMB lensing kernel is broad and peaks at $z{\sim}2$. The resulting cross-correlation is maximally sensitive to mass fluctuations at $z{\sim}0.44$. Assuming the Planck 2015 best-fit cosmology, the amplitude of the DES$\times$SPT cross-power is found to be $A = 0.88 \pm 0.30$ and that from DES$\times$Planck to be $A = 0.86 \pm 0.39$, where $A=1$ corresponds to the theoretical prediction. These are consistent with the expected signal and correspond to significances of $2.9 \sigma$ and $2.2 \sigma$ respectively. We demonstrate that our results are robust to a number of important systematic effects including the shear measurement method, estimator choice, photometric redshift uncertainty and CMB lensing systematics. Significant intrinsic alignment of galaxy shapes would increase the cross-correlation signal inferred from the data; we calculate a value of $A = 1.08 \pm 0.36$ for DES$\times$SPT when we correct the observations with a simple IA model. With three measurements of this cross-correlation now existing in the literature, there is not yet reliable evidence for any deviation from the expected LCDM level of cross-correlation, given the size of the statistical uncertainties and the significant impact of systematic errors, particularly IAs. We provide forecasts for the expected signal-to-noise of the combination of the five-year DES survey and SPT-3G.

We report the observation and confirmation of the first group- and cluster-scale strong gravitational lensing systems found in Dark Energy Survey (DES) data. Through visual inspection of data from the Science Verification (SV) season, we identified 53 candidate systems. We then obtained spectroscopic follow-up of 21 candidates using the Gemini Multi-Object Spectrograph (GMOS) at the Gemini South telescope and the Inamori-Magellan Areal Camera and Spectrograph (IMACS) at the Magellan/Baade telescope. With this follow-up, we confirmed six candidates as gravitational lenses: Three of the systems are newly discovered, and the remaining three were previously known. Of the 21 observed candidates, the remaining 15 were either not detected in spectroscopic observations, were observed and did not exhibit continuum emission (or spectral features), or were ruled out as lensing systems. The confirmed sample consists of one group-scale and five galaxy cluster-scale lenses. The lensed sources range in redshift z ~ 0.80-3.2, and in i-band surface brightness i_{SB} ~ 23-25 mag/sq.-arcsec. (2" aperture). For each of the six systems, we estimate the Einstein radius and the enclosed mass, which have ranges ~ 5.0 - 8.6" and ~ 7.5 x 10^{12} - 6.4 x 10^{13} solar masses, respectively.

We measure the weak lensing shear around galaxy troughs, i.e. the radial alignment of background galaxies relative to underdensities in projections of the foreground galaxy field over a wide range of redshift in Science Verification data from the Dark Energy Survey. Our detection of the shear signal is highly significant (10 to 15$\sigma$ for the smallest angular scales) for troughs with the redshift range z in [0.2,0.5] of the projected galaxy field and angular diameters of 10 arcmin...1{\deg}. These measurements probe the connection between the galaxy, matter density, and convergence fields. By assuming galaxies are biased tracers of the matter density with Poissonian noise, we find agreement of our measurements with predictions in a fiducial Lambda cold dark matter model. The prediction for the lensing signal on large trough scales is virtually independent of the details of the underlying model for the connection of galaxies and matter. Our comparison of the shear around troughs with that around cylinders with large galaxy counts is consistent with a symmetry between galaxy and matter over- and underdensities. In addition, we measure the two-point angular correlation of troughs with galaxies which, in contrast to the lensing signal, is sensitive to galaxy bias on all scales. The lensing signal of troughs and their clustering with galaxies is therefore a promising probe of the statistical properties of matter underdensities and their connection to the galaxy field.

We present a multi-frequency far-field beam map for the 5m dish telescope at the Bleien Observatory measured using a commercially available drone. We describe the hexacopter drone used in this experiment, the design of the flight pattern, and the data analysis scheme. This is the first application of this calibration method to a single dish radio telescope in the far-field. The high signal-to-noise data allows us to characterise the beam pattern with high accuracy out to at least the 4th side-lobe. The resulting 2D beam pattern is compared with that derived from a more traditional calibration approach using an astronomical calibration source. We discuss the advantages of this method compared to other beam calibration methods. Our results show that this drone-based technique is very promising for ongoing and future radio experiments, where the knowledge of the beam pattern is key to obtaining high-accuracy cosmological and astronomical measurements.

To shed light on the fundamental problems posed by Dark Energy and Dark Matter, a large number of experiments have been performed and combined to constrain cosmological models. We propose a novel way of quantifying the information gained by updates on the parameter constraints from a series of experiments which can either complement earlier measurements or replace them. For this purpose, we use the Kullback-Leibler divergence or relative entropy from information theory to measure differences in the posterior distributions in model parameter space from a pair of experiments. We apply this formalism to a historical series of Cosmic Microwave Background experiments ranging from Boomerang to WMAP, SPT, and Planck. Considering different combinations of these experiments, we thus estimate the information gain in units of bits and distinguish contributions from the reduction of statistical errors and the `surprise' corresponding to a significant shift of the parameters' central values. For this experiment series, we find individual relative entropy gains ranging from about 1 to 30 bits. In some cases, e.g. when comparing WMAP and Planck results, we find that the gains are dominated by the surprise rather than by improvements in statistical precision. We discuss how this technique provides a useful tool for both quantifying the constraining power of data from cosmological probes and detecting the tensions between experiments.

We present a strong lensing modeling technique based on versatile basis sets for the lens and source planes. Our method uses high performance Monte Carlo algorithms, allows for an adaptive build up of complexity and bridges the gap between parametric and pixel based reconstruction methods. We apply our method to a HST image of the strong lens system RXJ1131-1231 and show that our method finds a reliable solution and is able to detect substructure in the lens and source planes simultaneously. Using mock data we show that our method is sensitive to sub-clumps with masses four orders of magnitude smaller than the main lens, which corresponds to about $10^8 M_{\odot}$, without prior knowledge on the position and mass of the sub-clump. The modelling approach is flexible and maximises automation to facilitate the analysis of the large number of strong lensing systems expected in upcoming wide field surveys. The resulting search for dark sub-clumps in these systems, without mass-to-light priors, offers promise for probing physics beyond the standard model in the dark matter sector.

The joint analysis of galaxy-galaxy lensing and galaxy clustering is a promising method for inferring the growth function of large scale structure. This analysis will be carried out on data from the Dark Energy Survey (DES), with its measurements of both the distribution of galaxies and the tangential shears of background galaxies induced by these foreground lenses. We develop a practical approach to modeling the assumptions and systematic effects affecting small scale lensing, which provides halo masses, and large scale galaxy clustering. Introducing parameters that characterize the halo occupation distribution (HOD), photometric redshift uncertainties, and shear measurement errors, we study how external priors on different subsets of these parameters affect our growth constraints. Degeneracies within the HOD model, as well as between the HOD and the growth function, are identified as the dominant source of complication, with other systematic effects sub-dominant. The impact of HOD parameters and their degeneracies necessitate the detailed joint modeling of the galaxy sample that we employ. We conclude that DES data will provide powerful constraints on the evolution of structure growth in the universe, conservatively/optimistically constraining the growth function to 7.9\%/4.8\% with its first-year data that covered over 1000 square degrees, and to 3.9\%/2.3\% with its full five-year data that will survey 5000 square degrees, including both statistical and systematic uncertainties.

Bayesian inference is often used in cosmology and astrophysics to derive constraints on model parameters from observations. This approach relies on the ability to compute the likelihood of the data given a choice of model parameters. In many practical situations, the likelihood function may however be unavailable or intractable due to non-gaussian errors, non-linear measurements processes, or complex data formats such as catalogs and maps. In these cases, the simulation of mock data sets can often be made through forward modeling. We discuss how Approximate Bayesian Computation (ABC) can be used in these cases to derive an approximation to the posterior constraints using simulated data sets. This technique relies on the sampling of the parameter set, a distance metric to quantify the difference between the observation and the simulations and summary statistics to compress the information in the data. We first review the principles of ABC and discuss its implementation using a Population Monte-Carlo (PMC) algorithm and the Mahalanobis distance metric. We test the performance of the implementation using a Gaussian toy model. We then apply the ABC technique to the practical case of the calibration of image simulations for wide field cosmological surveys. We find that the ABC analysis is able to provide reliable parameter constraints for this problem and is therefore a promising technique for other applications in cosmology and astrophysics. Our implementation of the ABC PMC method is made available via a public code release.

We present photometric redshift estimates for galaxies used in the weak lensing analysis of the Dark Energy Survey Science Verification (DES SV) data. Four model- or machine learning-based photometric redshift methods -- ANNZ2, BPZ calibrated against BCC-Ufig simulations, SkyNet, and TPZ -- are analysed. For training, calibration, and testing of these methods, we construct a catalogue of spectroscopically confirmed galaxies matched against DES SV data. The performance of the methods is evaluated against the matched spectroscopic catalogue, focusing on metrics relevant for weak lensing analyses, with additional validation against COSMOS photo-zs. From the galaxies in the DES SV shear catalogue, which have mean redshift $0.72\pm0.01$ over the range $0.3<z<1.3$, we construct three tomographic bins with means of $z=\{0.45, 0.67, 1.00\}$. These bins each have systematic uncertainties $\delta z \lesssim 0.05$ in the mean of the fiducial SkyNet photo-z $n(z)$. We propagate the errors in the redshift distributions through to their impact on cosmological parameters estimated with cosmic shear, and find that they cause shifts in the value of $\sigma_8$ of approx. 3%. This shift is within the one sigma statistical errors on $\sigma_8$ for the DES SV shear catalog. We further study the potential impact of systematic differences on the critical surface density, $\Sigma_{\mathrm{crit}}$, finding levels of bias safely less than the statistical power of DES SV data. We recommend a final Gaussian prior for the photo-z bias in the mean of $n(z)$ of width $0.05$ for each of the three tomographic bins, and show that this is a sufficient bias model for the corresponding cosmology analysis.

We present a mass map reconstructed from weak gravitational lensing shear measurements over 139 sq. deg from the Dark Energy Survey (DES) Science Verification data. The mass map probes both luminous and dark matter, thus providing a tool for studying cosmology. We find good agreement between the mass map and the distribution of massive galaxy clusters identified using a red-sequence cluster finder. Potential candidates for super-clusters and voids are identified using these maps. We measure the cross-correlation between the mass map and a magnitude-limited foreground galaxy sample and find a detection at the 5-7 sigma level on a large range of scales. These measurements are consistent with simulated galaxy catalogs based on LCDM N-body simulations, suggesting low systematics uncertainties in the map. We summarize our key findings in this letter; the detailed methodology and tests for systematics are presented in a companion paper.

Spatially-varying depth and characteristics of observing conditions, such as seeing, airmass, or sky background, are major sources of systematic uncertainties in modern galaxy survey analyses, in particular in deep multi-epoch surveys. We present a framework to extract and project these sources of systematics onto the sky, and apply it to the Dark Energy Survey (DES) to map the observing conditions of the Science Verification (SV) data. The resulting distributions and maps of sources of systematics are used in several analyses of DES SV to perform detailed null tests with the data, and also to incorporate systematics in survey simulations. We illustrate the complementarity of these two approaches by comparing the SV data with the BCC-UFig, a synthetic sky catalogue generated by forward-modelling of the DES SV images. We analyse the BCC-UFig simulation to construct galaxy samples mimicking those used in SV galaxy clustering studies. We show that the spatially-varying survey depth imprinted in the observed galaxy densities and the redshift distributions of the SV data are successfully reproduced by the simulation and well-captured by the maps of observing conditions. The combined use of the maps, the SV data and the BCC-UFig simulation allows us to quantify the impact of spatial systematics on $N(z)$, the redshift distributions inferred using photometric redshifts. We conclude that spatial systematics in the SV data are mainly due to seeing fluctuations and are under control in current clustering and weak lensing analyses. The framework presented here is relevant to all multi-epoch surveys, and will be essential for exploiting future surveys such as the Large Synoptic Survey Telescope (LSST), which will require detailed null-tests and realistic end-to-end image simulations to correctly interpret the deep, high-cadence observations of the sky.

Weak gravitational lensing allows one to reconstruct the spatial distribution of the projected mass density across the sky. These "mass maps" provide a powerful tool for studying cosmology as they probe both luminous and dark matter. In this paper, we present a weak lensing mass map reconstructed from shear measurements in a 139 sq. deg area from the Dark Energy Survey (DES) Science Verification (SV) data. We compare the distribution of mass with that of the foreground distribution of galaxies and clusters. The overdensities in the reconstructed map correlate well with the distribution of optically detected clusters. We demonstrate that candidate superclusters and voids along the line of sight can be identified, exploiting the tight scatter of the cluster photometric redshifts. We cross-correlate the mass map with a foreground magnitude-limited galaxy sample from the same data. Our measurement gives results consistent with mock catalogs from N-body simulations that include the primary sources of statistical uncertainties in the galaxy, lensing, and photo-z catalogs. The statistical significance of the cross-correlation is at the 6.8-sigma level with 20 arcminute smoothing. A major goal of this study is to investigate systematic effects arising from a variety of sources, including PSF and photo-z uncertainties. We make maps derived from twenty variables that may characterize systematics and find the principal components. We find that the contribution of systematics to the lensing mass maps is generally within measurement uncertainties. In this work, we analyze less than 3% of the final area that will be mapped by the DES; the tools and analysis techniques developed in this paper can be applied to forthcoming larger datasets from the survey.

We present the first multi-wavelength, high-contrast imaging study confirming the protoplanet embedded in the disk around the Herbig Ae/Be star HD100546. The object is detected at $L'$ ($\sim 3.8\,\mu m$) and $M'$ ($\sim 4.8\,\mu m$), but not at $K_s$ ($\sim 2.1\,\mu m$), and the emission consists of a point source component surrounded by spatially resolved emission. For the point source component we derive apparent magnitudes of $L'=13.92\pm0.10$ mag, $M'=13.33\pm0.16$ mag, and $K_s>15.43\pm0.11$ mag (3$\sigma$ limit), and a separation and position angle of $(0.457\pm0.014)"$ and $(8.4\pm1.4)^\circ$, and $(0.472\pm0.014)"$ and $(9.2\pm1.4)^\circ$ in $L'$ and $M'$, respectively. We demonstrate that the object is co-moving with HD100546 and can reject any (sub-)stellar fore-/background object. Fitting a single temperature blackbody to the observed fluxes of the point source component yields an effective temperature of $T_{eff}=932^{+193}_{-202}$ K and a radius for the emitting area of $R=6.9^{+2.7}_{-2.9}$ R$_{\rm Jupiter}$. The best-fit luminosity is $L=(2.3^{+0.6}_{-0.4})\cdot 10^{-4}\,L_{\rm Sun}$. We quantitatively compare our findings with predictions from evolutionary and atmospheric models for young, gas giant planets, discuss the possible existence of a warm, circumplanetary disk, and note that the de-projected physical separation from the host star of $(53\pm2)$ au poses a challenge standard planet formation theories. Considering the suspected existence of an additional planet orbiting at $\sim$13--14 au, HD100546 appears to be an unprecedented laboratory to study the formation of multiple gas giant planets empirically.

Weak lensing by large-scale structure is a powerful technique to probe the dark components of the universe. To understand the measurement process of weak lensing and the associated systematic effects, image simulations are becoming increasingly important. For this purpose we present a first implementation of the $\textit{Monte Carlo Control Loops}$ ($\textit{MCCL}$; Refregier & Amara 2014), a coherent framework for studying systematic effects in weak lensing. It allows us to model and calibrate the shear measurement process using image simulations from the Ultra Fast Image Generator (UFig; Berge et al. 2013). We apply this framework to a subset of the data taken during the Science Verification period (SV) of the Dark Energy Survey (DES). We calibrate the UFig simulations to be statistically consistent with DES images. We then perform tolerance analyses by perturbing the simulation parameters and study their impact on the shear measurement at the one-point level. This allows us to determine the relative importance of different input parameters to the simulations. For spatially constant systematic errors and six simulation parameters, the calibration of the simulation reaches the weak lensing precision needed for the DES SV survey area. Furthermore, we find a sensitivity of the shear measurement to the intrinsic ellipticity distribution, and an interplay between the magnitude-size and the pixel value diagnostics in constraining the noise model. This work is the first application of the $\textit{MCCL}$ framework to data and shows how it can be used to methodically study the impact of systematics on the cosmic shear measurement.

We present a forward-modelling simulation framework designed to model the data products from the Dark Energy Survey (DES). This forward-model process can be thought of as a transfer function -- a mapping from cosmological and astronomical signals to the final data products used by the scientists. Using output from the cosmological simulations (the Blind Cosmology Challenge), we generate simulated images (the Ultra Fast Image Simulator, Berge et al. 2013) and catalogs representative of the DES data. In this work we simulate the 244 sq. deg coadd images and catalogs in 5 bands for the DES Science Verification (SV) data. The simulation output is compared with the corresponding data to show that major characteristics of the images and catalogs can be captured. We also point out several directions of future improvements. Two practical examples, star/galaxy classification and proximity effects on object detection, are then used to demonstrate how one can use the simulations to address systematics issues in data analysis. With clear understanding of the simplifications in our model, we show that one can use the simulations side-by-side with data products to interpret the measurements. This forward modelling approach is generally applicable for other upcoming and future surveys. It provides a powerful tool for systematics studies which is sufficiently realistic and highly controllable.

Stars with debris disks are intriguing targets for direct imaging exoplanet searches, both due to previous detections of wide planets in debris disk systems, as well as commonly existing morphological features in the disks themselves that may be indicative of a planetary influence. Here we present observations of three of the most nearby young stars, that are also known to host massive debris disks: Vega, Fomalhaut, and eps Eri. The Spitzer Space Telescope is used at a range of orientation angles for each star, in order to supply a deep contrast through angular differential imaging combined with high-contrast algorithms. The observations provide the opportunity to probe substantially colder bound planets (120--330 K) than is possible with any other technique or instrument. For Vega, some apparently very red candidate point sources detected in the 4.5 micron image remain to be tested for common proper motion. The images are sensitive to ~2 Mjup companions at 150 AU in this system. The observations presented here represent the first search for planets around Vega using Spitzer. The upper 4.5 micron flux limit on Fomalhaut b could be further constrained relative to previous data. In the case of eps Eri, planets below both the effective temperature and the mass of Jupiter could be probed from 80 AU and outwards, although no such planets were found. The data sensitively probe the regions around the edges of the debris rings in the systems where planets can be expected to reside. These observations validate previous results showing that more than an order of magnitude improvement in performance in the contrast-limited regime can be acquired with respect to conventional methods by applying sophisticated high-contrast techniques to space-based telescopes, thanks to the high degree of PSF stability provided in this environment.

The Python programming language is becoming increasingly popular for scientific applications due to its simplicity, versatility, and the broad range of its libraries. A drawback of this dynamic language, however, is its low runtime performance which limits its applicability for large simulations and for the analysis of large data sets, as is common in astrophysics and cosmology. While various frameworks have been developed to address this limitation, most focus on covering the complete language set, and either force the user to alter the code or are not able to reach the full speed of an optimised native compiled language. In order to combine the ease of Python and the speed of C++, we developed HOPE, a specialised Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimisation on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. We assess the performance of HOPE by performing a series of benchmarks and compare its execution speed with that of plain Python, C++ and the other existing frameworks. We find that HOPE improves the performance compared to plain Python by a factor of 2 to 120, achieves speeds comparable to that of C++, and often exceeds the speed of the existing solutions. We discuss the differences between HOPE and the other frameworks, as well as future extensions of its capabilities. The fully documented HOPE package is available at http://hope.phys.ethz.ch and is published under the GPLv3 license on PyPI and GitHub.

We develop an extension of \textit{the Halo Model} that describes analytically the corrections to the matter power spectrum due to the physics of baryons. We extend these corrections to the weak-lensing shear angular power spectrum. Within each halo, our baryonic model accounts for: 1) a central galaxy, the major stellar component whose properties are derived from abundance matching techniques; 2) a hot plasma in hydrostatic equilibrium and 3) an adiabatically-contracted dark matter component. This analytic approach allows us to compare our model to the dark-matter-only case. Our basic assumptions are tested against the hydrodynamical simulations of Martizzi et. al. (2014), with which a remarkable agreement is found. Our baryonic model has only one free parameter, $M_{\rm crit}$, the critical halo mass that marks the transition between feedback-dominated halos, mostly devoid of gas, and gas rich halos, in which AGN feedback effects become weaker. We explore the entire cosmological parameter space, using the angular power spectrum in three redshift bins as the observable, assuming a Euclid-like survey. We derive the corresponding constraints on the cosmological parameters, as well as the possible bias introduced by neglecting the effects of baryonic physics. We find that, up to $\ell_{max}$=4000, baryonic physics plays very little role in the cosmological parameters estimation. However, if one goes up to $\ell_{max}$=8000, the marginalized errors on the cosmological parameters can be significantly reduced, but neglecting baryonic physics can lead to bias in the recovered cosmological parameters up to 10$\sigma$. These biases are removed if one takes into account the main baryonic parameter, $M_{\rm crit}$, which can also be determined up to 1-2\%, along with the other cosmological parameters.

We present results from a study of the photometric redshift performance of the Dark Energy Survey (DES), using the early data from a Science Verification (SV) period of observations in late 2012 and early 2013 that provided science-quality images for almost 200 sq.~deg.~at the nominal depth of the survey. We assess the photometric redshift performance using about 15000 galaxies with spectroscopic redshifts available from other surveys. These galaxies are used, in different configurations, as a calibration sample, and photo-$z$'s are obtained and studied using most of the existing photo-$z$ codes. A weighting method in a multi-dimensional color-magnitude space is applied to the spectroscopic sample in order to evaluate the photo-$z$ performance with sets that mimic the full DES photometric sample, which is on average significantly deeper than the calibration sample due to the limited depth of spectroscopic surveys. Empirical photo-$z$ methods using, for instance, Artificial Neural Networks or Random Forests, yield the best performance in the tests, achieving core photo-$z$ resolutions $\sigma_{68} \sim 0.08$. Moreover, the results from most of the codes, including template fitting methods, comfortably meet the DES requirements on photo-$z$ performance, therefore, providing an excellent precedent for future DES data sets.

Spectroscopic redshift surveys offer great prospects for constraining the dark sector in cosmology. Future surveys will however be both deep and wide and will thus require an analysis in 3-dimensional spherical geometry. We review and compare several methods which have been proposed in the literature for this purpose, focusing in particular on implementations of the spherical harmonic tomography (SHT) power spectrum $C^{i j}_{l}$ and the spherical Fourier Bessel (SFB) power spectrum $C_{l} (k, k')$. Using a Fisher analysis, we compare the forecasted constraints on cosmological parameters using these statistics. These constraints typically rely on approximations such as the Limber approximation and make specific choices in the numerical implementation of each statistic. Using a series of toy models, we explore the applicability of these approximations and study the sensitivity of the SHT and SFB statistics to the details of their implementation. In particular, we show that overlapping redshift bins may improve cosmological constraints using the SHT statistic when the number of bins is small, and that the SFB constraints are quite robust to changes in the assumed distance-redshift relation. We also find that the SHT can be tailored to be more sensitive to modes at redshifts close to the survey boundary, while the SFB appears better suited to capture information beyond the smooth shape of the power spectrum. In this context, we discuss the pros and cons of the different techniques and their impact on the design and analysis of future wide field spectroscopic surveys.

We construct a simple phenomenological model for the evolving galaxy population by incorporating pre-defined baryonic prescriptions into a dark matter hierarchical merger tree. Specifically the model is based on the simple gas-regulator model introduced by Lilly et al. 2013 coupled with the empirical quenching rules of Peng et al. 2010/12. The simplest model already does quite well in reproducing, without re-adjusting the input parameters, many observables including the Main Sequence sSFR-mass relation, the faint end slope of the galaxy mass function and the shape of the star-forming and passive mass functions. Compared with observations and/or the recent phenomenological model of Behroozi et al. 2013 based on epoch-dependent abundance-matching, our model also qualitatively reproduces the evolution of the Main Sequence sSFR(z) and SFRD(z) star formation rate density relations, the $M_s - M_h$ stellar-to-halo mass relation and also the $SFR - M_h$ relation. Quantitatively the evolution of sSFR(z) and SFRD(z) is not steep enough, the $M_s - M_h$ relation is not quite peaked enough and, surprisingly, the ratio of quenched to star-forming galaxies around M* is not quite high enough. We show that these deficiencies can simultaneously be solved by ad hoc allowing galaxies to re-ingest some of the gas previously expelled in winds, provided that this is done in a mass-dependent and epoch-dependent way. These allow the model galaxies to reduce an inherent tendency to saturate their star-formation efficiency. This emphasizes how efficient galaxies around M* are in converting baryons into stars and highlights the fact that quenching occurs just at the point when galaxies are rapidly approaching the maximum possible efficiency of converting baryons into stars.

We present L' and J-band high-contrast observations of HD169142, obtained with the VLT/NACO AGPM vector vortex coronagraph and the Gemini Planet Imager, respectively. A source located at 0".156+/-0".032 north of the host star (PA=7.4+/-11.3 degrees) appears in the final reduced L' image. At the distance of the star (~145 pc), this angular separation corresponds to a physical separation of 22.7+/-4.7 AU, locating the source within the recently resolved inner cavity of the transition disk. The source has a brightness of L'=12.2+/-0.5 mag, whereas it is not detected in the J band (J>13.8 mag). If its L' brightness arose solely from the photosphere of a companion and given the J-L' color constraints, it would correspond to a 28-32 MJupiter object at the age of the star, according to the COND models. Ongoing accretion activity of the star suggests, however, that gas is left in the inner disk cavity from which the companion could also be accreting. In this case the object could be lower in mass and its luminosity enhanced by the accretion process and by a circumplanetary disk. A lower mass object is more consistent with the observed cavity width. Finally, the observations enable us to place an upper limit on the L'-band flux of a second companion candidate orbiting in the disk annular gap at ~50 AU, as suggested by millimeter observations. If the second companion is also confirmed, HD169142 might be forming a planetary system, with at least two companions opening gaps and possibly interacting with each other.

We announce the public release of PynPoint, a Python package that we have developed for analysing exoplanet data taken with the angular differential imaging observing technique. In particular, PynPoint is designed to model the point spread function of the central star and to subtract its flux contribution to reveal nearby faint companion planets. The current version of the package does this correction by using a principal component analysis method to build a basis set for modelling the point spread function of the observations. We demonstrate the performance of the package by reanalysing publicly available data on the exoplanet beta Pictoris b, which consists of close to 24,000 individual image frames. We show that PynPoint is able to analyse this typical data in roughly 1.5 minutes on a Mac Pro, when the number of images is reduced by co-adding in sets of 5. The main computational work parallelises well as a result of a reliance on SciPy and NumPy functions. For this calculation the peak memory load is 6Gb, which can be run comfortably on most workstations. A simpler calculation, by co-adding over 50, takes 3 seconds with a peak memory usage of 600 Mb. This can be performed easily on a laptop. In developing the package we have modularised the code so that we will be able to extend functionality in future releases, through the inclusion of more modules, without it affecting the users application programming interface. We distribute the PynPoint package through the central PyPi sever, and the documentation is available online (http://pynpoint.ethz.ch).

Weak lensing by large scale structure or 'cosmic shear' is a potentially powerful cosmological probe to shed new light on Dark Matter, Dark Energy and Modified Gravity. It is based on the weak distortions induced by large-scale structures on the observed shapes of distant galaxies through gravitational lensing. While the potentials of this purely gravitational effect are great, results from this technique have been hampered because the measurement of this weak effect is difficult and limited by systematics effects. In particular, a demanding step is the measurement of the weak lensing shear from wide field CCD images of galaxies. We describe the origin of the problem and propose a way forward for cosmic shear. Our proposed approach is based on Monte-Carlo Control Loops and draws upon methods widely used in particle physics and engineering. We describe the control loop scheme and show how it provides a calibration method based on fast image simulations tuned to reproduce the statistical properties of a specific cosmic shear data set. Through a series of iterative loops and diagnostic tests, the Monte Carlo image simulations are made robust to perturbations on modeling input parameters and thus to systematic effects. We discuss how this approach can make the problem tractable and unleash to full potential of cosmic shear for cosmology.

Recent observations have led to the establishment of the concordance LCDM model for cosmology. A number of experiments are being planned to shed light on dark energy, dark matter, inflation and gravity, which are the key components of the model. To optimize and compare the reach of these surveys, several figures of merit have been proposed. They are based on either the forecasted precision on the LCDM model and its expansion, or on the expected ability to distinguish two models. We propose here another figure of merit that quantifies the capacity of future surveys to rule out the LCDM model. It is based on a measure of the difference in volume of observable space that the future surveys will constrain with and without imposing the model. This model breaking figure of merit is easy to compute and can lead to different survey optimizations than other metrics. We illustrate its impact using a simple combination of supernovae and BAO mock observations and compare the respective merit of these probes to challenge LCDM. We discuss how this approach would impact the design of future cosmological experiments.

We outline the prospects for performing pioneering radio weak gravitational lensing analyses using observations from a potential forthcoming JVLA Sky Survey program. A large-scale survey with the JVLA can offer interesting and unique opportunities for performing weak lensing studies in the radio band, a field which has until now been the preserve of optical telescopes. In particular, the JVLA has the capacity for large, deep radio surveys with relatively high angular resolution, which are the key characteristics required for a successful weak lensing study. We highlight the potential advantages and unique aspects of performing weak lensing in the radio band. In particular, the inclusion of continuum polarisation information can greatly reduce noise in weak lensing reconstructions and can also remove the effects of intrinsic galaxy alignments, the key astrophysical systematic effect that limits weak lensing at all wavelengths. We identify a VLASS "deep fields" program (total area ~10-20 square degs), to be conducted at L-band and with high-resolution (A-array configuration), as the optimal survey strategy from the point of view of weak lensing science. Such a survey will build on the unique strengths of the JVLA and will remain unsurpassed in terms of its combination of resolution and sensitivity until the advent of the Square Kilometre Array. We identify the best fields on the JVLA-accessible sky from the point of view of overlapping with existing deep optical and near infra-red data which will provide crucial redshift information and facilitate a host of additional compelling multi-wavelength science.

We present the results of a study to optimize the principal component analysis (PCA) algorithm for planet detection, a new algorithm complementing ADI and LOCI for increasing the contrast achievable next to a bright star. The stellar PSF is constructed by removing linear combinations of principal components, allowing the flux from an extrasolar planet to shine through. The number of principal components used determines how well the stellar PSF is globally modelled. Using more principal components may decrease the number of speckles in the final image, but also increases the background noise. We apply PCA to Fomalhaut VLT NaCo images acquired at 4.05 micron with an apodized phase plate. We do not detect any companions, with a model dependent upper mass limit of 13-18 M_Jup from 4-10 AU. PCA achieves greater sensitivity than the LOCI algorithm for the Fomalhaut coronagraphic data by up to 1 magnitude. We make several adaptations to the PCA code and determine which of these prove the most effective at maximizing the signal-to-noise from a planet very close to its parent star. We demonstrate that optimizing the number of principal components used in PCA proves most effective for pulling out a planet signal.

We study the benefits and limits of parallelised Markov chain Monte Carlo (MCMC) sampling in cosmology. MCMC methods are widely used for the estimation of cosmological parameters from a given set of observations and are typically based on the Metropolis-Hastings algorithm. Some of the required calculations can however be computationally intensive, meaning that a single long chain can take several hours or days to calculate. In practice, this can be limiting, since the MCMC process needs to be performed many times to test the impact of possible systematics and to understand the robustness of the measurements being made. To achieve greater speed through parallelisation, MCMC algorithms need to have short auto-correlation times and minimal overheads caused by tuning and burn-in. The resulting scalability is hence influenced by two factors, the MCMC overheads and the parallelisation costs. In order to efficiently distribute the MCMC sampling over thousands of cores on modern cloud computing infrastructure, we developed a Python framework called CosmoHammer which embeds emcee, an implementation by Foreman-Mackey et al. (2012) of the affine invariant ensemble sampler by Goodman and Weare (2010). We test the performance of CosmoHammer for cosmological parameter estimation from cosmic microwave background data. While Metropolis-Hastings is dominated by overheads, CosmoHammer is able to accelerate the sampling process from a wall time of 30 hours on a dual core notebook to 16 minutes by scaling out to 2048 cores. Such short wall times for complex data sets opens possibilities for extensive model testing and control of systematics.

We present high-contrast observations of the circumstellar environment of the Herbig Ae/Be star HD100546. The final 3.8 micron image reveals an emission source at a projected separation of 0.48"+-0.04" (corresponding to ~47+-4 AU at a position angle of 8.9+-0.9 degree. The emission appears slightly extended with a point source component with an apparent magnitude of 13.2+-0.4 mag. The position of the source coincides with a local deficit in polarization fraction in near-infrared polarimetric imaging data, which probes the surface of the well-studied circumstellar disk of HD100546. This suggests a possible physical link between the emission source and the disk. Assuming a disk inclination of ~47 degree the de-projected separation of the object is ~68 AU. Assessing the likelihood of various scenarios we favor an interpretation of the available high-contrast data with a planet in the process of forming. Follow-up observations in the coming years can easily distinguish between the different possible scenarios empirically. If confirmed, HD100546 "b" would be a unique laboratory to study the formation process of a new planetary system, with one giant planet currently forming in the disk and a second planet possibly orbiting in the disk gap at smaller separations.

Simulated wide-field images are becoming an important part of observational astronomy, either to prepare for new surveys or to test measurement methods. In order to efficiently explore vast parameter spaces, the computational speed of simulation codes is a central requirement to their implementation. We introduce the Ultra Fast Image Generator (UFig) which aims to bring wide-field imaging simulations to the current limits of computational capabilities. We achieve this goal through: (1) models of galaxies, stars and observational conditions, which, while simple, capture the key features necessary for realistic simulations, and (2) state-of-the-art computational and implementation optimizations. We present the performances of UFig and show that it is faster than existing public simulation codes by several orders of magnitude. It allows us to produce images more quickly than SExtractor needs to analyze them. For instance, it can simulate a typical 0.25 deg^2 Subaru SuprimeCam image (10k x 8k pixels) with a 5-sigma limiting magnitude of R=26 in 30 seconds on a laptop, yielding an average simulation time for a galaxy of 30 microseconds. This code is complementary to end-to-end simulation codes and can be used as a fast, central component of observational methods relying on simulations.

We present the scientific performance results of PynPoint, our Python-based software package that uses principle component analysis to detect and estimate the flux of exoplanets in two dimensional imaging data. Recent advances in adaptive optics and imaging technology at visible and infrared wavelengths have opened the door to direct detections of planetary companions to nearby stars, but image processing techniques have yet to be optimized. We show that the performance of our approach gives a marked improvement over what is presently possible using existing methods such as LOCI. To test our approach, we use real angular differential imaging (ADI) data taken with the adaptive optics assisted high resolution near-infrared camera NACO at the VLT. These data were taken during the commissioning of the apodising phase plate (APP) coronagraph. By inserting simulated planets into these data, we test the performance of our method as a function of planet brightness for different positions on the image. We find that in all cases PynPoint has a detection threshold that is superior to that given by our LOCI analysis when assessed in a common statistical framework. We obtain our best improvements for smaller inner working angles (IWA). For an IWA of ~ 0.29" we find that we achieve a detection sensitivity that is a factor of 5 better than LOCI. We also investigate our ability to correctly measure the flux of planets. Again, we find improvements over LOCI, with PynPoint giving more stable results. Finally, we apply our package to a non-APP dataset of the exoplanet beta Pictoris b and reveal the planet with high signal-to-noise. This confirms that PynPoint can potentially be applied with high fidelity to a wide range of high-contrast imaging datasets.

We present a method for attaining sub-arcsecond pointing stability during sub- orbital balloon flights, as designed for in the High Altitude Lensing Observatory (HALO) concept. The pointing method presented here has the potential to perform near-space quality optical astronomical imaging at 1-2% of the cost of space-based missions. We also discuss an architecture that can achieve sufficient thermomechanical stability to match the pointing stability. This concept is motivated by advances in the development and testing of Ultra Long Duration Balloon (ULDB) flights which promise to allow observation campaigns lasting more than three months. The design incorporates a multi-stage pointing architecture comprising: a gondola coarse azimuth control system, a multi-axis nested gimbal frame structure with arcsecond stability, a telescope de-rotator to eliminate field rotation, and a fine guidance stage consisting of both a telescope mounted angular rate sensor and guide CCDs in the focal plane to drive a fast-steering mirror. We discuss the results of pointing tests together with a preliminary thermo-mechanical analysis required for sub-arcsecond pointing at high altitude. Possible future applications in the areas of wide-field surveys and exoplanet searches are also discussed.

The COSMOS field has been the subject of a wide range of observations, with a number of studies focusing on reconstructing the 3D dark matter density field. Typically, these studies have focused on one given method or tracer. In this paper, we reconstruct the distribution of mass in the COSMOS field out to a redshift z=1 by combining Hubble Space Telescope weak lensing measurements with zCOSMOS spectroscopic measurements of galaxy clustering. The distribution of galaxies traces the distribution of mass with high resolution (particularly in redshift, which is not possible with lensing), and the lensing data empirically calibrates the mass normalisation (bypassing the need for theoretical models). Two steps are needed to convert a galaxy survey into a density field. The first step is to create a smooth field from the galaxy positions, which is a point field. We investigate four possible methods for this: (i) Gaussian smoothing, (ii) convolution with truncated isothermal sphere, (iii) fifth nearest neighbour smoothing and (iv) a muliti-scale entropy method. The second step is to rescale this density field using a bias prescription. We calculate the optimal bias scaling for each method by comparing predictions from the smoothed density field with the measured weak lensing data, on a galaxy-by-galaxy basis. In general, we find scale-independent bias for all the smoothing schemes, to a precision of 10%. For the nearest neighbour smoothing case, we find the bias to be 2.51\pm 0.25. We also find evidence for a strongly evolving bias, increasing by a factor of ~3.5 between redshifts 0<z<0.8. We believe this strong evolution can be explained by the fact that we use a flux limited sample to build the density field.

Weak gravitational lensing has the potential to constrain cosmological parameters to high precision. However, as shown by the Shear TEsting Programmes (STEP) and GRavitational lEnsing Accuracy Testing (GREAT) Challenges, measuring galaxy shears is a nontrivial task: various methods introduce different systematic biases which have to be accounted for. We investigate how pixel noise on the image affects the bias on shear estimates from a Maximum-Likelihood forward model-fitting approach using a sum of co-elliptical S\'{e}rsic profiles, in complement to the theoretical approach of an an associated paper. We evaluate the bias using a simple but realistic galaxy model and find that the effects of noise alone can cause biases of order 1-10% on measured shears, which is significant for current and future lensing surveys. We evaluate a simulation-based calibration method to create a bias model as a function of galaxy properties and observing conditions. This model is then used to correct the simulated measurements. We demonstrate that this method can effectively reduce noise bias so that shear measurement reaches the level of accuracy required for estimating cosmic shear in upcoming lensing surveys.

Weak lensing experiments are a powerful probe of cosmology through their measurement of the mass distribution of the universe. A challenge for this technique is to control systematic errors that occur when measuring the shapes of distant galaxies. In this paper we investigate noise bias, a systematic error that arises from second order noise terms in the shape measurement process. We first derive analytical expressions for the bias of general Maximum Likelihood Estimators (MLEs) in the presence of additive noise. We then find analytical expressions for a simplified toy model in which galaxies are modeled and fitted with a Gaussian with its size as a single free parameter. Even for this very simple case we find a significant effect. We also extend our analysis to a more realistic 6-parameter elliptical Gaussian model. We find that the noise bias is generically of the order of the inverse-squared signal-to-noise ratio (SNR) of the galaxies and is thus of the order of a percent for galaxies of SNR of 10, i.e. comparable to the weak lensing shear signal. This is nearly two orders of magnitude greater than the systematics requirements for future all-sky weak lensing surveys. We discuss possible ways to circumvent this effect, including a calibration method using simulations discussed in an associated paper.

We study the constraining power on primordial non-Gaussianity of future surveys of the large-scale structure of the Universe for both near-term surveys (such as the Dark Energy Survey - DES) as well as longer term projects such as Euclid and WFIRST. Specifically we perform a Fisher matrix analysis forecast for such surveys, using DES-like and Euclid-like configurations as examples, and take account of any expected photometric and spectroscopic data. We focus on two-point statistics and we consider three observables: the 3D galaxy power spectrum in redshift space, the angular galaxy power spectrum, and the projected weak-lensing shear power spectrum. We study the effects of adding a few extra parameters to the basic LCDM set. We include the two standard parameters to model the current value for the dark energy equation of state and its time derivative, w_0, w_a, and we account for the possibility of primordial non-Gaussianity of the local, equilateral and orthogonal types, of parameter fNL and, optionally, of spectral index n_fNL. We present forecasted constraints on these parameters using the different observational probes. We show that accounting for models that include primordial non-Gaussianity does not degrade the constraint on the standard LCDM set nor on the dark-energy equation of state. By combining the weak lensing data and the information on projected galaxy clustering, consistently including all two-point functions and their covariance, we find forecasted marginalised errors sigma (fNL) ~ 3, sigma (n_fNL) ~ 0.12 from a Euclid-like survey for the local shape of primordial non-Gaussianity, while the orthogonal and equilateral constraints are weakened for the galaxy clustering case, due to the weaker scale-dependence of the bias. In the lensing case, the constraints remain instead similar in all configurations.

The success of future large scale weak lensing surveys will critically depend on the accurate estimation of photometric redshifts of very large samples of galaxies. This in turn depends on both the quality of the photometric data and the photo-z estimators. In a previous study, (Bordoloi et al. 2010) we focussed primarily on the impact of photometric quality on photo-z estimates and on the development of novel techniques to construct the N(z) of tomographic bins at the high level of precision required for precision cosmology, as well as the correction of issues such as imprecise corrections for Galactic reddening. We used the same set of templates to generate the simulated photometry as were then used in the photo-z code, thereby removing any effects of "template error". In this work we now include the effects of "template error" by generating simulated photometric data set from actual COSMOS photometry. We use the trick of simulating redder photometry of galaxies at higher redshifts by using a bluer set of passbands on low z galaxies with known redshifts. We find that "template error" is a rather small factor in photo-z performance, at the photometric precision and filter complement expected for all-sky surveys. With only a small sub-set of training galaxies with spectroscopic redshifts, it is in principle possible to construct tomographic redshift bins whose mean redshift is known, from photo-z alone, to the required accuracy of 0.002(1+z).

GRavitational lEnsing Accuracy Testing 2010 (GREAT10) is a public image analysis challenge aimed at the development of algorithms to analyze astronomical images. Specifically, the challenge is to measure varying image distortions in the presence of a variable convolution kernel, pixelization and noise. This is the second in a series of challenges set to the astronomy, computer science and statistics communities, providing a structured environment in which methods can be improved and tested in preparation for planned astronomical surveys. GREAT10 extends upon previous work by introducing variable fields into the challenge. The "Galaxy Challenge" involves the precise measurement of galaxy shape distortions, quantified locally by two parameters called shear, in the presence of a known convolution kernel. Crucially, the convolution kernel and the simulated gravitational lensing shape distortion both now vary as a function of position within the images, as is the case for real data. In addition, we introduce the "Star Challenge" that concerns the reconstruction of a variable convolution kernel, similar to that in a typical astronomical observation. This document details the GREAT10 Challenge for potential participants. Continually updated information is also available from http://www.greatchallenges.info.

Point Spread Function (PSF) modeling is a central part of any astronomy data analysis relying on measuring the shapes of objects. It is especially crucial for weak gravitational lensing, in order to beat down systematics and allow one to reach the full potential of weak lensing in measuring dark energy. A PSF modeling pipeline is made of two main steps: the first one is to assess its shape on stars, and the second is to interpolate it at any desired position (usually galaxies). We focus on the second part, and compare different interpolation schemes, including polynomial interpolation, radial basis functions, Delaunay triangulation and Kriging. For that purpose, we develop simulations of PSF fields, in which stars are built from a set of basis functions defined from a Principal Components Analysis of a real ground-based image. We find that Kriging gives the most reliable interpolation, significantly better than the traditionally used polynomial interpolation. We also note that although a Kriging interpolation on individual images is enough to control systematics at the level necessary for current weak lensing surveys, more elaborate techniques will have to be developed to reach future ambitious surveys' requirements.

We investigate the statistics of flux anomalies in gravitationally lensed QSOs as a function of dark matter halo properties such as substructure content and halo ellipticity. We do this by creating a very large number of simulated lenses with finite source sizes to compare with the data. After analyzing these simulations, our conclusions are: 1) The finite size of the source is important. The point source approximation commonly used can cause biased results. 2) The widely used R_cusp statistic is sensitive to halo ellipticity as well as the lens' substructure content. 3) For compact substructure, we find new upper bounds on the amount of substructure from the the fact that no simple single-galaxy lenses have been observed with a single source having more than four well separated images. 4) The frequency of image flux anomalies is largely dependent on the total surface mass density in substructures and the size--mass relation for the substructures, and not on the range of substructure masses. 5) Substructure models with the same size--mass relation produce similar numbers of flux anomalies even when their internal mass profiles are different. 6) The lack of high image multiplicity lenses puts a limit on a combination of the substructures' size--mass relation, surface density and mass. 7) Substructures with shallower mass profiles and/or larger sizes produce less extra images. 8) The constraints that we are able to measure here with current data are roughly consistent with \LambdaCDM Nbody simulations.

The field of weak gravitational lensing, which measures the basic properties of the Universe by studying the way that light from distant galaxies is perturbed as it travels towards us, is a very active field in astronomy. This short article presents a broad overview of the field, including some of the important questions that cosmologists are trying to address, such as understanding the nature of dark energy and dark matter. To do this, there is an increasing feeling within the weak lensing community that other disciplines, such as computer science, machine learning, signal processing and image processing, have the expertise that would bring enormous advantage if channelled into lensing studies. To illustrate this point, the article below outlines some of the key steps in a weak lensing analysis chain. The challenges are distinct at each step, but each could benefit from ideas developed in the signal processing domain. This article also gives a brief overview of current and planned lensing experiments that will soon bring about an influx of data sets that are substantially larger than those analysed to date. It is, therefore, inevitable that current techniques are likely to be insufficient, thus leading to an exciting era where new methods will become crucial for the continued success of the field.

This paper is aimed at developing a better understanding of the structure of the information that in contained in galaxy surveys, so as to find optimal ways to combine observables from such surveys. We first show how Jaynes' Maximal Entropy Principle allows us, in the general case, to express the Fisher information content of data sets in terms of the curvature of the Shannon entropy surface with respect to the relevant observables. This allows us to understand the Fisher information content of a data set, once a physical model is specified, independently of the specific way that the data will be processed, and without any assumptions of Gaussianity. This includes as a special case the standard Fisher matrix prescriptions for Gaussian variables widely used in the cosmological community, for instance for power spectra extraction. As an application of this approach, we evaluate the prospects of a joint analysis of weak lensing tracers up to second order in the shapes distortions, in the case that the noise in each probe can be effectively treated as model independent. These include the magnification, the two ellipticity and the four flexion fields. At the two point level, we show that the only effect of treating these observables in combination is a simple scale dependent decrease of the noise contaminating the accessible spectrum of the lensing E-mode. We provide simple bounds to its extraction by a combination of such probes, as well as its quantitative evaluation when the correlations between the noise variables for any two such probes can be neglected.

Cosmic shear has been identified as the method with the most potential to constrain dark energy. To capitalise on this potential it is necessary to measure galaxy shapes with great accuracy, which in turn requires a detailed model for the image blurring, the Point Spread Function (PSF). In general the PSF varies with wavelength and therefore the PSF integrated over an observing filter depends on the spectrum of the object. For a typical galaxy the spectrum varies across the galaxy image, thus the PSF depends on the position within the image. We estimate the bias on the shear due to such colour gradients by modelling galaxies using two co-centered, co-elliptical Sersic profiles, each with a different spectrum. We estimate the effect of ignoring colour gradients and find the shear bias from a single galaxy can be very large depending on the properties of the galaxy. We find that halving the filter width reduces the shear bias by a factor of about 5. We show that, to first order, tomographic cosmic shear two point statistics depend on the mean shear bias over the galaxy population at a given redshift. For a single broad filter, and averaging over a small galaxy catalogue, we find a mean shear bias which is subdominant to the predicted statistical errors for future cosmic shear surveys. However, the true mean shear bias may exceed the statistical errors, depending on how accurately the catalogue represents the observed distribution of galaxies in the cosmic shear survey. We then investigate the bias on the shear for two-filter imaging and find that the bias is reduced by at least an order of magnitude. Lastly, we find that it is possible to calibrate galaxies for which colour gradients were ignored using two-filter imaging of a fair sample of noisy galaxies, if the galaxy model is known. For a S/N of 25 the number of galaxies required in each tomographic redshift bin is of order 1e4.

Aims: The interactive software package iCosmo, designed to perform cosmological calculations is described. Methods: iCosmo is a software package to perform interactive cosmological calculations for the low redshift universe. Computing distance measures, the matter power spectrum, and the growth factor is supported for any values of the cosmological parameters. It also computes derived observed quantities for several cosmological probes such as cosmic shear, baryon acoustic oscillations and type Ia supernovae. The associated errors for these observables can be derived for customised surveys, or for pre-set values corresponding to current or planned instruments. The code also allows for the calculation of cosmological forecasts with Fisher matrices which can be manipulated to combine different surveys and cosmological probes. The code is written in the IDL language and thus benefits from the convenient interactive features and scientific library available in this language. iCosmo can also be used as an engine to perform cosmological calculations in batch mode, and forms a convenient adaptive platform for the development of further cosmological modules. With its extensive documentation, it may also serve as a useful resource for teaching and for newcomers in the field of cosmology. Results: The iCosmo package is described with various examples and command sequences. The code is freely available with documentation at http://www.icosmo.org, along with an interactive web interface and is part of the Initiative for Cosmology, a common archive for cosmological resources.

Given a standard model to test, an experiment can be designed to: (i) measure the standard model parameters; (ii) extend the standard model; or (iii) look for evidence of deviations from the standard model. To measure (or extend) the standard model, the Fisher matrix is widely used in cosmology to predict expected parameter errors for future surveys under Gaussian assumptions. In this article, we present a frame- work that can be used to design experiments such that it maximises the chance of finding a deviation from the standard model. Using a simple illustrative example, discussed in the appendix, we show that the optimal experimental configuration can depend dramatically on the optimisation approach chosen. We also show some simple cosmology calculations, where we study Baryonic Acoustic Oscillation and Supernove surveys. In doing so, we also show how external data, such as the positions of the CMB peaks measured by WMAP, and theory priors can be included in the analysis. In the cosmological cases that we have studied (DETF Stage III), we find that the three optimisation approaches yield similar results, which is reassuring and indicates that the choice of optimal experiment is fairly robust at this level. However, this may not be the case as we move to more ambitious future surveys.

Weak gravitational lensing has proven to be a powerful tool to map directly the distribution of dark matter in the Universe. The technique, currently used, relies on the accurate measurement of the gravitational shear that corresponds to the first-order distortion of the background galaxy images. More recently, a new technique has been introduced that relies on the accurate measurement of the gravitational flexion that corresponds to the second-order distortion of the background galaxy images. This technique should probe structures on smaller scales than that of a shear analysis. The goal of this paper is to compare the ability of shear and flexion to reconstruct the dark matter distribution by taking into account the dispersion in shear and flexion measurements. Our results show that the flexion is less sensitive than shear for constructing the convergence maps on scales that are physically feasible for mapping, meaning that flexion alone not be used to do convergence map reconstruction, even on small scales.

We compare the efficiency of weak lensing-selected galaxy clusters counts and of the weak lensing bispectrum at capturing non-Gaussian features in the dark matter distribution. We use the halo model to compute the weak lensing power spectrum, the bispectrum and the expected number of detected clusters, and derive constraints on cosmological parameters for a large, low systematic weak lensing survey, by focusing on the $\Omega_m$-$\sigma_8$ plane and on the dark energy equation of state. We separate the power spectrum into the resolved and the unresolved parts of the data, the resolved part being defined as detected clusters, and the unresolved part as the rest of the field. We consider four kinds of clusters counts, taking into account different amount of information : signal-to-noise ratio peak counts; counts as a function of clusters' mass; counts as a function of clusters' redshift; and counts as a function of clusters' mass and redshift. We show that when combined with the power spectrum, those four kinds of counts provide similar constraints, thus allowing one to perform the most direct counts, signal-to-noise peaks counts, and get percent level constraints on cosmological parameters. We show that the weak lensing bispectrum gives constraints comparable to those given by the power spectrum and captures non-Gaussian features as well as clusters counts, its combination with the power spectrum giving errors on cosmological parameters that are similar to, if not marginally smaller than, those obtained when combining the power spectrum with cluster counts. We finally note that in order to reach its potential, the weak lensing bispectrum must be computed using all triangle configurations, as equilateral triangles alone do not provide useful information.

Cosmic shear requires high precision measurement of galaxy shapes in the presence of the observational Point Spread Function (PSF) that smears out the image. The PSF must therefore be known for each galaxy to a high accuracy. However, for several reasons, the PSF is usually wavelength dependent, therefore the differences between the spectral energy distribution of the observed objects introduces further complexity. In this paper we investigate the effect of the wavelength-dependence of the PSF, focusing on instruments in which the PSF size is dominated by the diffraction-limit of the telescope and which use broad-band filters for shape measurement. We first calculate biases on cosmological parameter estimation from cosmic shear when the stellar PSF is used uncorrected. Using realistic galaxy and star spectral energy distributions and populations and a simple three-component circular PSF we find that the colour-dependence must be taken into account for the next generation of telescopes. We then consider two different methods for removing the effect (i) the use of stars of the same colour as the galaxies and (ii) estimation of the galaxy spectral energy distribution using multiple colours and using a telescope model for the PSF. We find that both of these methods correct the effect to levels below the tolerances required for per-cent level measurements of dark energy parameters. Comparison of the two methods favours the template-fitting method because its efficiency is less dependent on galaxy redshift than the broad-band colour method and takes full advantage of deeper photometry.

Weak gravitational lensing provides a sensitive probe of cosmology by measuring the mass distribution and the geometry of the low redshift universe. We show how an all-sky weak lensing tomographic survey can jointly constrain different sets of cosmological parameters describing dark energy, massive neutrinos (hot dark matter), and the primordial power spectrum. In order to put all sectors on an equal footing, we introduce a new parameter $\beta$, the second order running spectral index. Using the Fisher matrix formalism with and without CMB priors, we examine how the constraints vary as the parameter set is enlarged. We find that weak lensing with CMB priors provides robust constraints on dark energy parameters and can simultaneously provide strong constraints on all three sectors. We find that the dark energy sector is largely insensitive to the inclusion of the other cosmological sectors. Implications for the planning of future surveys are discussed.

The energy density of the Universe is dominated by dark energy and dark matter, two mysterious components which pose some of the most important questions in fundamental science today. Euclid is a high-precision survey mission designed to answer these questions by mapping the geometry of the dark Universe. Euclid's Visible-NIR imaging and spectroscopy of the entire extragalactic sky will further produce extensive legacy science for various fields of astronomy. Over the 2008-2009 period, Euclid has been the object of an ESA Assessment Phase in which the study of the Euclid Imaging instrument was under the responsibility of the Euclid Imaging Consortium (EIC). The EIC Science Book presents the studies done by the EIC science working groups in the context of this study phase. We first give a brief description of the Euclid mission and of the imaging instrument and surveys. We then summarise the primary and legacy science which will be achieved with the Euclid imaging surveys, along with the simulations and data handling scheme which have been developed to optimise the instrument and ensure its science performance.

Current and future weak lensing surveys will rely on photometrically estimated redshifts of very large numbers of galaxies. In this paper, we address several different aspects of the demanding photo-z performance that will be required for future experiments, such as the proposed ESA Euclid mission. It is first shown that the proposed all-sky near-infrared photometry from Euclid, in combination with anticipated ground-based photometry (e.g. PanStarrs-2 or DES) should yield the required precision in individual photo-z of sigma(z) < 0.05(1+z) at I_AB < 24.5. Simple a priori rejection schemes based on the photometry alone can be tuned to recognise objects with wildly discrepant photo-z and to reduce the outlier fraction to < 0.25% with only modest loss of otherwise usable objects. Turning to the more challenging problem of determining the mean redshift <z> of a set of galaxies to a precision of 0.002(1+z) we argue that, for many different reasons, this is best accomplished by relying on the photo-z themselves rather than on the direct measurement of <z> from spectroscopic redshifts of a representative subset of the galaxies. A simple adaptive scheme based on the statistical properties of the photo-z likelihood functions is shown to meet this stringent systematic requirement. We also examine the effect of an imprecise correction for Galactic extinction and the effects of contamination by fainter over-lapping objects in photo-z determination. The overall conclusion of this work is that the acquisition of photometrically estimated redshifts with the precision required for Euclid, or other similar experiments, will be challenging but possible. (abridged)

In the absence of any compelling physical model, cosmological systematics are often misrepresented as statistical effects and the approach of marginalising over extra nuisance systematic parameters is used to gauge the effect of the systematic. In this article we argue that such an approach is risky at best since the key choice of function can have a large effect on the resultant cosmological errors. As an alternative we present a functional form filling technique in which an unknown, residual, systematic is treated as such. Since the underlying function is unknown we evaluate the effect of every functional form allowed by the information available (either a hard boundary or some data). Using a simple toy model we introduce the formalism of functional form filling. We show that parameter errors can be dramatically affected by the choice of function in the case of marginalising over a systematic, but that in contrast the functional form filling approach is independent of the choice of basis set. We then apply the technique to cosmic shear shape measurement systematics and show that a shear calibration bias of |m(z)|< 0.001(1+z)^0.7 is required for a future all-sky photometric survey to yield unbiased cosmological parameter constraints to percent accuracy. A module associated with the work in this paper is available through the open source iCosmo code available at http://www.icosmo.org .

It is of great interest to measure the properties of substructures in dark matter halos at galactic and cluster scales. Here we suggest a method to constrain substructure properties using the variance of weak gravitational flexion in a galaxy-galaxy lensing context. We show the effectiveness of flexion variance in measuring substructures in N-body simulations of dark matter halos, and present the expected galaxy-galaxy lensing signals. We show the insensitivity of the method to the overall galaxy halo mass, and predict the method's signal-to-noise for a space-based all-sky survey, showing that the presence of substructure down to 10^9 M_\odot halos can be reliably detected.

Within the context of constraining an expansion of the dark energy equation of state w(z) we show that the eigendecomposition of Fisher matrices is sensitive to both the maximum order of the expansion and the basis set choice. We investigate the Fisher matrix formalism in the case that a particular function is expanded in some basis set. As an example we show results for an all sky weak lensing tomographic experiment. We show that the set of eigenfunctions is not unique and that the best constrained functions are only reproduced accurately at very higher order N > 100, a tophat basis set requires an even higher order. We show that the common approach used for finding the marginalised eigenfunction errors is sensitive to the choice of non-w(z) parameters and priors. The eigendecomposition of Fisher matrices is a potentially useful tool that can be used to determine the predicted accuracy with which an experiment could constrain w(z). It also allows for the reconstruction of the redshift sensitivity of the experiment to changes in w(z). However the technique is sensitive to both the order and the basis set choice. Publicly available code is available as part of iCosmo at http://www.icosmo.org .

We present the results of the GREAT08 Challenge, a blind analysis challenge to infer weak gravitational lensing shear distortions from images. The primary goal was to stimulate new ideas by presenting the problem to researchers outside the shear measurement community. Six GREAT08 Team methods were presented at the launch of the Challenge and five additional groups submitted results during the 6 month competition. Participants analyzed 30 million simulated galaxies with a range in signal to noise ratio, point-spread function ellipticity, galaxy size, and galaxy type. The large quantity of simulations allowed shear measurement methods to be assessed at a level of accuracy suitable for currently planned future cosmic shear observations for the first time. Different methods perform well in different parts of simulation parameter space and come close to the target level of accuracy in several of these. A number of fresh ideas have emerged as a result of the Challenge including a re-examination of the process of combining information from different galaxies, which reduces the dependence on realistic galaxy modelling. The image simulations will become increasingly sophisticated in future GREAT challenges, meanwhile the GREAT08 simulations remain as a benchmark for additional developments in shear measurement algorithms.

The GRavitational lEnsing Accuracy Testing 2008 (GREAT08) Challenge focuses on a problem that is of crucial importance for future observations in cosmology. The shapes of distant galaxies can be used to determine the properties of dark energy and the nature of gravity, because light from those galaxies is bent by gravity from the intervening dark matter. The observed galaxy images appear distorted, although only slightly, and their shapes must be precisely disentangled from the effects of pixelisation, convolution and noise. The worldwide gravitational lensing community has made significant progress in techniques to measure these distortions via the Shear TEsting Program (STEP). Via STEP, we have run challenges within our own community, and come to recognise that this particular image analysis problem is ideally matched to experts in statistical inference, inverse problems and computational learning. Thus, in order to continue the progress seen in recent years, we are seeking an infusion of new ideas from these communities. This document details the GREAT08 Challenge for potential participants. Please visit http://www.great08challenge.info for the latest information.

Cosmic shear measurements rely on our ability to measure and correct the Point Spread Function (PSF) of the observations. This PSF is measured using stars in the field, which give a noisy measure at random points in the field. Using Wiener filtering, we show how errors in this PSF correction process propagate into shear power spectrum errors. This allows us to test future space-based missions, such as Euclid or JDEM, thereby allowing us to set clear engineering specifications on PSF variability. For ground-based surveys, where the variability of the PSF is dominated by the environment, we briefly discuss how our approach can also be used to study the potential of mitigation techniques such as correlating galaxy shapes in different exposures. To illustrate our approach we show that for a Euclid-like survey to be statistics limited, an initial pre-correction PSF ellipticity power spectrum, with a power-law slope of -3 must have an amplitude at l =1000 of less than 2 x 10^{-13}. This is 1500 times smaller than the typical lensing signal at this scale. We also find that the power spectrum of PSF size \dR^2) at this scale must be below 2 x 10^{-12}. Public code available as part of iCosmo at http://www.icosmo.org

We investigate the impact of point spread function (PSF) fitting errors on cosmic shear measurements using the concepts of complexity and sparsity. Complexity, introduced in a previous paper, characterizes the number of degrees of freedom of the PSF. For instance, fitting an underlying PSF with a model with low complexity will lead to small statistical errors on the model parameters, however these parameters could suffer from large biases. Alternatively, fitting with a large number of parameters will tend to reduce biases at the expense of statistical errors. We perform an optimisation of scatters and biases by studying the mean squared error of a PSF model. We also characterize a model sparsity, which describes how efficiently the model is able to represent the underlying PSF using a limited number of free parameters. We present the general case and illustrate it for a realistic example of PSF fitted with shapelet basis sets. We derive the relation between complexity and sparsity of the PSF model, signal-to-noise ratio of stars and systematic errors on cosmological parameters. With the constraint of maintaining the systematics below the statistical uncertainties, this lead to a relation between the required number of stars to calibrate the PSF and the sparsity. We discuss the impact of our results for current and future cosmic shear surveys. In the typical case where the biases can be represented as a power law of the complexity, we show that current weak lensing surveys can calibrate the PSF with few stars, while future surveys will require hard constraints on the sparsity in order to calibrate the PSF with 50 stars.

Weak gravitational lensing provides a unique method to map directly the dark matter in the Universe. The majority of lensing analyses uses the two-point statistics of the cosmic shear field to constrain the cosmological model yielding degeneracies, such as that between sigma_8 and Omega_M respectively the r.m.s. of the mass fluctuations at a scale of 8 Mpc/h and the matter density parameter both at z = 0. However, the two-point statistics only measure the Gaussian properties of the field and the weak lensing field is non-Gaussian. It has been shown that the estimation of non-Gaussian statistics on weak lensing data can improve the constraints on cosmological parameters. In this paper, we systematically compare a wide range of non-Gaussian estimators in order to determine which one provides tighter constraints on the cosmological parameters. These statistical methods include skewness, kurtosis and the Higher Criticism test in several sparse representations such as wavelet and curvelet; as well as the bispectrum, peak counting and a new introduced statistic called Wavelet Peak Counting (WPC). Comparisons based on sparse representations show that the wavelet transform is the most sensitive to non-Gaussian cosmological structures. It appears also that the best statistic for non-Gaussian characterization in weak lensing mass maps is the WPC. Finally, we show that the sigma_8 -Omega_m degeneracy could be even better broken if the WPC estimation is performed on weak lensing mass maps filtered by the wavelet method, MRLens.

With increasingly large data sets, weak lensing measurements are able to measure cosmological parameters with ever greater precision. However this increased accuracy also places greater demands on the statistical tools used to extract the available information. To date, the majority of lensing analyses use the two point-statistics of the cosmic shear field. These can either be studied directly using the two-point correlation function, or in Fourier space, using the power spectrum. But analyzing weak lensing data inevitably involves the masking out of regions or example to remove bright stars from the field. Masking out the stars is common practice but the gaps in the data need proper handling. In this paper, we show how an inpainting technique allows us to properly fill in these gaps with only $N \log N$ operations, leading to a new image from which we can compute straight forwardly and with a very good accuracy both the pow er spectrum and the bispectrum. We propose then a new method to compute the bispectrum with a polar FFT algorithm, which has the main advantage of avoiding any interpolation in the Fourier domain. Finally we propose a new method for dark matter mass map reconstruction from shear observations which integrates this new inpainting concept. A range of examples based on 3D N-body simulations illustrates the results.

We have performed a 70 billion dark-matter particles N-body simulation in a 2 $h^{-1}$ Gpc periodic box, using the concordance, cosmological model as favored by the latest WMAP3 results. We have computed a full-sky convergence map with a resolution of $\Delta \theta \simeq 0.74$ arcmin$^{2}$, spanning 4 orders of magnitude in angular dynamical range. Using various high-order statistics on a realistic cut sky, we have characterized the transition from the linear to the nonlinear regime at $\ell \simeq 1000$ and shown that realistic galactic masking affects high-order moments only below $\ell < 200$. Each domain (Gaussian and non-Gaussian) spans 2 decades in angular scale. This map is therefore an ideal tool for testing map-making algorithms on the sphere. As a first step in addressing the full map reconstruction problem, we have benchmarked in this paper two denoising methods: 1) Wiener filtering applied to the Spherical Harmonics decomposition of the map and 2) a new method, called MRLens, based on the modification of the Maximum Entropy Method on a Wavelet decomposition. While the latter is optimal on large spatial scales, where the signal is Gaussian, MRLens outperforms the Wiener method on small spatial scales, where the signal is highly non-Gaussian. The simulated full-sky convergence map is freely available to the community to help the development of new map-making algorithms dedicated to the next generation of weak-lensing surveys.

Astronomy and cosmology have embraced the internet. We routinely and successfully use the internet as a repository for sharing code, publications and information, and as a computational resource. However the interactive nature of the web, for use as an alternative to downloading code has been largely overlooked. In this article we will outline a simple framework in which a cosmological code can be turned into an interactive web interface. This is presented as a result of creating http://www.icosmo.org which is a front-end for the open-source software iCosmo. We explain how an HTML page can be created and how a cosmological code can be incorporated into a web environment using CGI scripts. We outline how plots and downloadable text can be made, and describe how help and documentation can be created. By using simple HTML and CGI scripts a basic web interface for any cosmological code can be created easily. We provide a worked example of the methods outlined, which can be used as a simple template by any researcher who wants to share their work online.

The Baryon Acoustic Oscillations (BAOs) or baryon wiggles which are present in the galaxy power spectrum at scales 100-150Mpc/h are powerful features with which to constrain cosmology. The potential of these probes is such that these are now included as primary science goals in the planning of several future galaxy surveys. However, there is not a uniquely defined BAO Method in the literature but a range of implementations. We study the assumptions and cosmological performances of three different BAO methods: the full Fourier space power spectrum [P(k)], the `wiggles only' in Fourier space and the spherical harmonics power spectrum [C(l)]. We contrast the power of each method to constrain cosmology for two fiducial surveys taken from the Dark Energy Task Force (DETF) report and equivalent to future ground and space based spectroscopic surveys. We find that, depending on the assumptions used, the dark energy Figure of Merit (FoM) can change by up to a factor of 35 for a given fiducial model and survey. We compare our results with the DETF implementation and, discuss the robustness of each probe, by quantifying the dependence of the FoM with the wavenumber range. The more information used by a method, the higher its statistical performance, but the higher its sensitivity to systematics and implementations details.

The control of systematic effects when measuring galaxy shapes is one of the main challenges for cosmic shear analyses. In this context, we study the fundamental limitations on shear accuracy due to the measurement of the Point Spread Function (PSF) from the finite number of stars. In order to do that, we translate the accuracy required for cosmological parameter estimation to the minimum number of stars over which the PSF must be calibrated. We first derive our results analytically in the case of infinitely small pixels (i.e. infinitely high resolution). Then image simulations are used to validate these results and investigate the effect of finite pixel size in the case of an elliptical gaussian PSF. Our results are expressed in terms of the minimum number of stars required to calibrate the PSF in order to ensure that systematic errors are smaller than statistical errors when estimating the cosmological parameters. On scales smaller than the area containing this minimum number of stars, there is not enough information to model the PSF. In the case of an elliptical gaussian PSF and in the absence of dithering, 2 pixels per PSF Full Width at Half Maximum (FWHM) implies a 20% increase of the minimum number of stars compared to the ideal case of infinitely small pixels; 0.9 pixels per PSF FWHM implies a factor 100 increase. In the case of a good resolution and a typical Signal-to-Noise Ratio distribution of stars, we find that current surveys need the PSF to be calibrated over a few stars, which may explain residual systematics on scales smaller than a few arcmins. Future all-sky cosmic shear surveys require the PSF to be calibrated over a region containing about 50 stars.

We study in detail the photometric redshift requirements needed for tomographic weak gravitational lensing in order to measure accurately the Dark Energy equation of state. In particular, we examine how ground-based photometry (u,g,r,i,z,y) can be complemented by space-based near-infrared (IR) photometry (J,H), e.g. on board the planned DUNE satellite. Using realistic photometric redshift simulations and an artificial neural network photo-z method we evaluate the Figure of Merit for the Dark Energy parameters $(w_0, w_a)$. We consider a DUNE-like broad optical filter supplemented with ground-based multi-band optical data from surveys like the Dark Energy Survey, Pan-STARRS and LSST. We show that the Dark Energy Figure of Merit would improved by a factor of 1.3 to 1.7 if IR filters are added on board DUNE. Furthermore we show that with IR data catastrophic photo-z outliers can be removed effectively. There is an interplay between the choice of filters, the magnitude limits and the removal of outliers. We draw attention to the dependence of the results on the galaxy formation scenarios encoded into the mock galaxies, e.g the galaxy reddening. For example, deep u band data could be as effective as the IR. We also find that about $10^5-10^6$ spectroscopic redshifts are needed for calibration of the full survey.

We present a joint weak lensing and X-ray analysis of 4 deg$^2$ from the CFHTLS and XMM-LSS surveys. Our weak lensing analysis is the first analysis of a real survey using shapelets, a new generation weak lensing analysis method. We create projected mass maps of the images, and extract 6 weak-lensing-detected clusters of galaxies. We show that their counts can be used to constrain the power spectrum normalisation $\sigma_8 =0.92_{-0.30}^{+0.26}$ for $\Omega_m=0.24$. We show that despite the large scatter generally observed in the M-T relation derived from lensing masses, tight constraints on both its slope and normalisation $M_*$ can be obtained with a moderate number of sources provided that the covered mass range is large enough. Adding clusters from Bardeau et al. (2007) to our sample, we measure $M_* = 2.71_{-0.61}^{+0.79} 10^{14} h^{-1} M_\odot$. Although they are dominated by shot noise and sample variance, our measurements are consistent with currently favoured values, and set the stage for future surveys. We thus investigate the dependence of those estimates on survey size, depth, and integration time, for joint weak lensing and X-ray surveys. We show that deep surveys should be dedicated to the study of the physics of clusters and groups of galaxies. For a given exposure time, wide surveys provide a larger number of detected clusters and are therefore preferred for the measurement of cosmological parameters such as $\sigma_8$ and $M_*$. We show that a wide survey of a few hundred square degrees is needed to improve upon current measurements of these parameters. More ambitious surveys covering 7000 deg$^2$ will provide the 1% accuracy in the estimation of the power spectrum and the M-T relation normalisations.

We describe a method for computing the biases that systematic signals introduce in parameter estimation using a simple extension of the Fisher matrix formalism. This allows us to calculate the offset of the best fit parameters relative to the fiducial model, in addition to the usual statistical error ellipse. As an application, we study the impact that residual systematics in tomographic weak lensing measurements. In particular we explore three different types of shape measurement systematics: (i) additive systematic with no redshift evolution; (ii) additive systematic with redshift evolution; and (iii) multiplicative systematic. In each case, we consider a wide range of scale dependence and redshift evolution of the systematics signal. For a future DUNE-like full sky survey, we find that, for cases with mild redshift evolution, the variance of the additive systematic signal should be kept below 10^-7 to ensure biases on cosmological parameters that are sub-dominant to the statistical errors. For the multiplicative systematics, which depends on the lensing signal, we find the multiplicative calibration m0 needs to be controlled to an accuracy better than 10^-3. We find that the impact of systematics can be underestimated if their assumes redshift dependence is too simplistic. We provide simple scaling relations to extend these requirements to any survey geometry and discuss the impact of our results for current and future weak lensing surveys.

Weak lensing surveys provide a powerful probe of dark energy through the measurement of the mass distribution of the local Universe. A number of ground-based and space-based surveys are being planned for this purpose. Here, we study the optimal strategy for these future surveys using the joint constraints on the equation of state parameter wn and its evolution wa as a figure of merit by considering power spectrum tomography. For this purpose, we first consider an `ideal' survey which is both wide and deep and exempt from systematics. We find that such a survey has great potential for dark energy studies, reaching one sigma precisions of 1% and 10% on the two parameters respectively. We then study the relative impact of various limitations by degrading this ideal survey. In particular, we consider the effect of sky coverage, survey depth, shape measurements systematics, photometric redshifts systematics and uncertainties in the non-linear power spectrum predictions. We find that, for a given observing time, it is always advantageous to choose a wide rather than a deep survey geometry. We also find that the dark energy constraints from power spectrum tomography are robust to photometric redshift errors and catastrophic failures, if a spectroscopic calibration sample of 10^4-10^5 galaxies is available. The impact of these systematics is small compared to the limitations that come from potential uncertainties in the power spectrum, due to shear measurement and theoretical errors. To help the planning of future surveys, we summarize our results with comprehensive scaling relations which avoid the need for full Fisher matrix calculations.

Understanding the nature of Dark Matter and Dark Energy is one of the most pressing issues in cosmology and fundamental physics. The purpose of the DUNE (Dark UNiverse Explorer) mission is to study these two cosmological components with high precision, using a space-based weak lensing survey as its primary science driver. Weak lensing provides a measure of the distribution of dark matter in the universe and of the impact of dark energy on the growth of structures. DUNE will also include a complementary supernovae survey to measure the expansion history of the universe, thus giving independent additional constraints on dark energy. The baseline concept consists of a 1.2m telescope with a 0.5 square degree optical CCD camera. It is designed to be fast with reduced risks and costs, and to take advantage of the synergy between ground-based and space observations. Stringent requirements for weak lensing systematics were shown to be achievable with the baseline concept. This will allow DUNE to place strong constraints on cosmological parameters, including the equation of state parameter of the dark energy and its evolution from redshift 0 to 1. DUNE is the subject of an ongoing study led by the French Space Agency (CNES), and is being proposed for ESA's Cosmic Vision programme.

We present a numerical technique to compute the gravitational lensing induced by simulated haloes. It relies on a 2D-Tree domain decomposition in the lens plane combined with a description of N-Body particles as extended clouds with a non-singular density. This technique is made fully adaptive by the use of a density-dependent smoothing which allows one to probe the lensing properties of haloes from the densest regions in the center or in substructures to the low-density regions in the outskirts. 'Smooth Particle Lensing' has some promising features. First, the deflection potential, the deflection angles, the convergence and the shear are direct and separate end-products of the SPL calculation and can be computed at an arbitrary distribution of points on the lens plane. Second, this flexibility avoids the use of interpolation or a finite differentiation procedure on a grid, does not require padding the region with zeros and focuses the computing power on relevant regions. The SPL algorithm is tested by populating isothermal spheres and ellipsoids with particles and then comparing the lensing calculations to the classical FFT-based technique and analytic solutions. We assess issues related to the resolution of the lensing code and the limitations set by the simulations themselves. We conclude by discussing how SPL can be used to predict the impact of substructures on strong lensing and how it can be generalized to weak lensing and cosmic shear simulations.

Galactic sized gravitational lenses are simulated by combining a cosmological N-body simulation and models for the baryonic component of the galaxy. The lens caustics, critical curves, image locations and magnification ratios are calculated by ray-shooting on an adaptive grid. When the source is near a cusp in a smooth lens' caustic the sum of the magnifications of the three closest images should be close to zero. It is found that in the observed cases this sum is generally too large to be consistent with the simulations implying that there is not enough substructure in the simulations. This suggests that other factors play an important role. These may include limited numerical resolution, lensing by structure outside the halo, selection bias and the possibility that a randomly selected galaxy halo may be more irregular, for example due to recent mergers, than the isolated halo used in this study. It is also shown that, with the level of substructure computed from the N-body simulations, the image magnifications of the Einstein cross type lenses are very weak functions of source size up to $\sim 1\kpc$. This is also true for the magnification ratios of widely separated images in the fold and cusp caustic lenses. This means that selected magnification ratios for different the emission regions of a lensed quasar should agree with each other, barring microlensing by stars. The source size dependence of the magnification ratio between the closest pair of images is more sensitive to substructure.

The normalisation of the matter power spectrum, sigma_8, is an essential ingredient to predict the phenomenology of the low redshift universe. It has been measured using several methods, such as X-ray cluster counts, weak lensing and the cosmic microwave background, which have yielded values ranging from 0.7 to 1.0. While these differences could be due to systematic effects, they could also be due to physics beyond the standard LambdaCDM model. An obvious possibility is the presence of non-Gaussian initial fluctuations in the density field. To study the impact of non-Gaussianity on each of these methods, we use a generalised halo model to compute cluster counts and the non-linear power spectrum for non-Gaussian models. Assuming scale invariance, the upper-limits on non-Gaussianity from the WMAP CMB experiment correspond to roughly a 4% shift in sigma_8 as measured from cluster counts and about 2% shift through weak lensing. This is not enough to account for the current internal and mutual discrepancies between the different methods, unless non-Gaussianity is strongly scale dependent. A comparison between future X-ray surveys with a two fold improvement in cluster mass calibration and future cosmic shear surveys with 400 deg^2 will be required to constrain non-Gaussianity on small scales with a precision matching that of the current CMB constraints on larger scales. Our results argue for the presence of systematics in the current cluster and cosmic shear surveys, or to non-standard physics other than non-Gaussianity.