We describe Rabacus, a Python package for calculating the transfer of hydrogen ionizing radiation in simplified geometries relevant to astronomy and cosmology. We present example solutions for three specific cases: 1) a semi-infinite slab gas distribution in a homogeneous isotropic background, 2) a spherically symmetric gas distribution with a point source at the center, and 3) a spherically symmetric gas distribution in a homogeneous isotropic background. All problems can accommodate arbitrary spectra and density profiles as input. The solutions include a treatment of both hydrogen and helium, a self-consistent calculation of equilibrium temperatures, and the transfer of recombination radiation. The core routines are written in Fortran 90 and then wrapped in Python leading to execution speeds thousands of times faster than equivalent routines written in pure Python. In addition, all variables have associated units for ease of analysis. The software is part of the Python Package Index and the source code is available on Bitbucket at https://bitbucket.org/galtay/rabacus . In addition, installation instructions and a detailed users guide are available at http://pythonhosted.org//rabacus .

We compute the z = 3 neutral hydrogen column density distribution function f(NHI) for 19 simulations drawn from the OWLS project using a post-processing correction for self-shielding calculated with full radiative transfer of the ionising background radiation. We investigate how different physical processes and parameters affect the abundance of Lyman-limit systems (LLSs) and damped Lyman-alpha absorbers (DLAs) including: i) metal-line cooling; ii) the efficiency of feedback from SNe and AGN; iii) the effective equation of state for the ISM; iv) cosmological parameters; v) the assumed star formation law and; vi) the timing of hydrogen reionization . We find that the normalisation and slope, D = d log10 f /d log10 NHI, of f(NHI) in the LLS regime are robust to changes in these physical processes. Among physically plausible models, f(NHI) varies by less than 0.2 dex and D varies by less than 0.18 for LLSs. This is primarily due to the fact that these uncertain physical processes mostly affect star-forming gas which contributes less than 10% to f(NHI) in the the LLS column density range. At higher column densities, variations in f(NHI) become larger (approximately 0.5 dex at NHI = 10^22 cm^-2 and 1.0 dex at NHI = 10^23 cm^-2) and molecular hydrogen formation also becomes important. Many of these changes can be explained in the context of self-regulated star formation in which the amount of star forming gas in a galaxy will adjust such that outflows driven by feedback balance inflows due to accretion. Data and code to reproduce all figures can be found at the following url: https://bitbucket.org/galtay/hi-cddf-owls-1

We present a new optical spectroscopic survey of 1777 'star-forming' ('SF') and 366 'non-star-forming' ('non-SF') galaxies at redshifts z < 1 (2143 in total), 22 AGN and 423 stars, observed by instruments such as DEIMOS, VIMOS and GMOS, in 3 fields containing 5 quasi-stellar objects (QSOs) with HST UV spectroscopy. We also present a new spectroscopic survey of 165 'strong' (10^14 < NHI < 10^17 cm^-2), and 489 'weak' (10^13 < NHI < 10^14 cm^-2) intervening HI absorption line systems at z < 1 (654 in total), observed in the spectra of 8 QSOs by COS and FOS on the HST. Combining these new data with previously published galaxy catalogs such as VVDS and GDDS, we have gathered a sample of 654 HI absorption systems and 17509 galaxies at transverse scales < 50 Mpc. We present observational results on the HI-galaxy and galaxy-galaxy correlations at transverse scales r < 10 Mpc, and the HI-HI auto-correlation at transverse scales r < 2 Mpc. The two-point correlation functions are measured both along and transverse to the line-of-sight. We constrain the HI-galaxy statistical connection, as a function of both HI column density and galaxy star-forming activity. Our results are consistent with the following conclusions: (1) the bulk of HI systems on Mpc scales have little velocity dispersion (<120 km/s) with respect to the bulk of galaxies; (2) the vast majority of strong HI systems and SF galaxies are distributed in the same locations, together with 75+-15% of non-SF galaxies, all of which typically reside in dark matter haloes of similar masses; (3) 25+-15% of non-SF galaxies reside in galaxy clusters and are not correlated with strong HI systems at scales < 2 Mpc; and (4) 50% of weak HI systems reside within galaxy voids (hence not correlated with galaxies), and are confined in dark matter haloes of masses smaller than those hosting... [abridged]

We calculate the distribution of HI within 750 proper kpc/h of a quasar, Lbol = 1.62e13 Lsun, powered by an SMBH, Mbh = 4.47e8 Msun, at z = 3. Our numerical model includes a cosmological hydrodynamic simulation that tracks the self consistent growth and thermal feedback of black holes calculated using GADGET-3 as well as a detailed post-processing ray tracing treatment of the non-uniform ionizing radiation field calculated using SPHRAY, which naturally accounts for the self shielding of optically thick systems. We show that the correct treatment of self shielding introduces a flattening feature into the neutral column density distribution around Log NHI = 20 and that regions with the lowest neutral fractions are not those with the highest density gas. For comparison, we solve a Ricatti equation which determines the equilibrium Hydrogen ionization fractions in the presence of a radiation field that falls off as 1/r^2 with regions above a given gas density threshold completely shielded from ionizing radiation. We demonstrate that these semi analytic models cannot reproduce the HI field calculated using SPHRAY. We conclude by comparing our models of this single proximity zone to observations by Hennawi and Prochaska of the absorption spectra of background quasars which are coincident on the sky with foreground quasars in their Quasars Probing Quasars (QPQ) series of papers. Compared to the QPQ sample, we find a factor of 3 fewer optically thick (Log NHI > 17.2) systems around our quasar, however the dark matter halo that hosts our simulated quasar, Mhalo = 5.25e12 Msun, is less massive than the typical QPQ host halo by a factor of four. Allowing for a linear scaling between halo mass, baryonic overdensity and number of absorbers, we estimate the typical host halo mass in the QPQ sample as 1.92e13 Msun.

We describe URCHIN, a reverse ray tracing radiative transfer scheme optimised to model self-shielding from the post-reionisation ultraviolet (UV) background in cosmological simulations. The reverse ray tracing strategy provides several benefits over forward ray tracing codes including: (1) the preservation of adaptive density field resolution (2) completely uniform sampling of gas elements by rays; (3) the preservation of galilean invariance; (4) the ability to sample the UV background spectrum with hundreds of frequency bins; and (5) exact preservation of the input UV background spectrum and amplitude in optically thin gas. The implementation described here focuses on Smoothed Particle Hydrodynamics (SPH). However, the method can be applied to any density field representation in which resolution elements admit ray intersection tests and can be associated with optical depths. We characterise the errors in our implementation in stages beginning with comparison to known analytic solutions and ending with a realistic model of the z = 3 cosmological UV background incident onto a suite of spherically symmetric models of gaseous galactic halos.

We investigate the properties of the HI Ly-a absorption systems (Ly-a forest) within and around galaxy voids at z<0.1. We find a significant excess (>99% c.l.) of Ly-a systems at the edges of galaxy voids with respect to a random distribution, on ~5 h^{-1} Mpc scales. We find no significant difference in the number of systems inside voids with respect to the random expectation. We report differences between both column density (N_{HI}) and Doppler parameter (b_{HI}) distributions of Ly-a systems found inside and at the edge of galaxy voids at the >98% and >90% c.l. respectively. Low density environments (voids) have smaller values for both N_{HI} and b_{HI} than higher density ones (edges of voids). These trends are theoretically expected and also found in GIMIC, a state-of-the-art hydrodynamical simulation. Our findings are consistent with a scenario of at least three types of Ly-alpha: (1) containing embedded galaxies and so directly correlated with galaxies (referred as `halo-like'), (2) correlated with galaxies only because they lie in the same over-dense LSS, and (3) associated with under-dense LSS with a very low auto-correlation amplitude (~ random) that are not correlated with luminous galaxies. We argue the latter arise in structures still growing linearly from the primordial density fluctuations inside galaxy voids that have not formed galaxies because of their low densities. We estimate that these under-dense LSS absorbers account for 25-30% +- 6% of the current Ly-a population (N_{HI} > 10^{12.5} cm^{-2}) while the other two types account for the remaining 70-75% +- 12%. Assuming that only N_{HI} > 10^{14} cm^{-2} systems have embedded galaxies nearby, we have estimated the contribution of the `halo-like' Ly-a to be ~12-15% +- 4% and consequently ~55-60% +- 13% of the Ly-a systems to be associated with the over-dense LSS.

Simulations predict that galaxies grow primarily through the accretion of gas that has not gone through an accretion shock near the virial radius and that this cold gas flows towards the central galaxy along dense filaments and streams. There is, however, little observational evidence for the existence of these cold flows. We use a large, cosmological, hydrodynamical simulation that has been post-processed with radiative transfer to study the contribution of cold flows to the observed z=3 column density distribution of neutral hydrogen, which our simulation reproduces. We find that nearly all of the HI absorption arises in gas that has remained colder than 10^5.5 K, at least while it was extragalactic. In addition, the majority of the HI is rapidly falling towards a nearby galaxy, with non-negligible contributions from outflowing and static gas. Above a column density of N_HI = 10^17 cm^-2, most of the absorbers reside inside haloes, but the interstellar medium only dominates for N_HI > 10^21 cm^-2. Haloes with total mass below 10^10 Msun dominate the absorption for 10^17<N_HI < 10^21 cm^-2, but the average halo mass increases sharply for higher column densities. Although very little of the HI in absorbers with N_HI <~ 10^20 cm^-2 resides inside galaxies, systems with N_HI > 10^17 cm^-2 are closely related to star formation: most of their HI either will become part of the interstellar medium before z=2 or has been ejected from a galaxy at z>3. Cold accretion flows are critical for the success of our simulation in reproducing the observed rate of incidence of damped Lyman-alpha and particularly that of Lyman limit systems. We therefore conclude that cold accretion flows exist and have already been detected in the form of high column density HI absorbers.

We investigate the column density distribution function of neutral hydrogen at redshift z = 3 using a cosmological simulation of galaxy formation from the OverWhelmingly Large Simulations (OWLS) project. The base simulation includes gravity, hydrodynamics, star formation, supernovae feedback, stellar winds, chemodynamics, and element-by-element cooling in the presence of a uniform UV background. Self-shielding and formation of molecular hydrogen are treated in post-processing, without introducing any free parameters, using an accurate reverse ray-tracing algorithm and an empirical relation between gas pressure and molecular mass fraction. The simulation reproduces the observed z = 3 abundance of Ly-A forest, Lyman Limit and Damped Ly-A HI absorption systems probed by quasar sight lines over ten orders of magnitude in column density. Self-shielding flattens the column density distribution for NHI > 10^18 cm-2, while the conversion to fully neutral gas and conversion of HI to H2 steepen it around column densities of NHI = 10^20.3 cm-2 and NHI = 10^21.5 cm-2, respectively.

The UV escape fraction from high-redshift galaxies plays a key role in models of cosmic reionisation. Because it is currently not possible to deduce the escape fractions during the epoch of reionisation from observations, we have to rely on numerical simulations. Our aim is to better constrain the escape fraction from high-redshift dwarf galaxies, as these are the most likely sources responsible for reionising the Universe. We employ a N-body/SPH method that includes realistic prescriptions for the physical processes that are important for the evolution of dwarf galaxies. These models are post-processed with radiative transfer to determine the escape fraction of ionising radiation. We perform a parameter study to assess the influence of the spin parameter, gas fraction and formation redshift of the galaxy and study the importance of numerical parameters as resolution, source distribution and local gas clearing. We find that the UV escape fraction from high-redshift dwarf galaxies that have formed a rotationally supported disc lie between 1e-5 and 0.1. The mass and angular momentum of the galaxy are the most important parameters that determine the escape fraction. We compare our results to previous work and discuss the uncertainties of our models. The low escape fraction we find for high-redshift dwarf galaxies is balanced by their high stellar content, resulting in an efficiency parameter for stars that is only marginally lower than the values found by semi-analytic models of reionisation. We therefore conclude that dwarf galaxies play an important role in cosmic reionisation also after the initial starburst phase, when the gas has settled into a disc.

We introduce SPHRAY, a Smoothed Particle Hydrodynamics (SPH) ray tracer designed to solve the 3D, time dependent, radiative transfer (RT) equations for arbitrary density fields. The SPH nature of SPHRAY makes the incorporation of separate hydrodynamics and gravity solvers very natural. SPHRAY relies on a Monte Carlo (MC) ray tracing scheme that does not interpolate the SPH particles onto a grid but instead integrates directly through the SPH kernels. Given initial conditions and a description of the sources of ionizing radiation, the code will calculate the non-equilibrium ionization state (HI, HII, HeI, HeII, HeIII, e) and temperature (internal energy/entropy) of each SPH particle. The sources of radiation can include point like objects, diffuse recombination radiation, and a background field from outside the computational volume. The MC ray tracing implementation allows for the quick introduction of new physics and is parallelization friendly. A quick Axis Aligned Bounding Box (AABB) test taken from computer graphics applications allows for the acceleration of the raytracing component. We present the algorithms used in SPHRAY and verify the code by performing all the test problems detailed in the recent Radiative Transfer Comparison Project of Iliev et. al. The Fortran 90 source code for SPHRAY and example SPH density fields are made available on a companion website (www.sphray.org).

The structures produced during the epoch of reionization by the action of radiation on neutral hydrogen are in principle different to those that arise through gravitational growth of initially small perturbations. We explore the difference between the two mechanisms using high resolution cosmological radiative transfer. Our computations use a Monte Carlo code which raytraces directly through SPH kernels without a grid, preserving the high spatial resolution of the underlying hydrodynamic simulation. Because the properties of the first sources of radiation are uncertain, we simulate a range of models with different source properties and recombination physics. We examine the morphology of the neutral hydrogren distribution and the reionization history in these models. We find that at fixed mean neutral fraction, structures are visually most affected by the existence of a lower limit in source luminosity, then by galaxy mass to light ratio, and are minimally affected by changes in the recombination rate and amplitude of mass fluctuations. We concentrate on the autocorrelation function of the neutral hydrogen, xi_HI(r) as a basic quantitive measure of Radiation Induced Structure (RIS.) All the models we test exhibit a characteristic behaviour, with xi_HI(r) becoming initially linearly antibiased with respect to the matter correlation function, reaching a minimum bias factor b~0.5 when the universe is ~10-20% ionized. After this xi_HI(r) increases rapidly in amplitude, overtaking the matter correlation function. It keeps a power law shape, but flattens considerably, reaching an asymptotic logarithmic slope of gamma ~-0.5. The growth rate of HI fluctuations is exponentially more rapid than gravitational growth over a brief interval of redshift Deltaz ~ 2-3.

Alignments of galaxy clusters (the Binggeli effect), as well as of galaxies themselves have long been studied both observationally and theoretically. Here we test the influence of large-scales structures and tidal fields on the shapes and alignments of cluster-size and galaxy-size dark matter halos. We use a high-resolution N-body simulation of a $\Lambda$CDM universe, together with the results of Colberg et al. (2005), who identified filaments connecting pairs of clusters. We find that cluster pairs connected by a filament are strongly aligned with the cluster-cluster axis, whereas unconnected ones are not. For smaller, galaxy-size halos, there also is an alignment signal, but its strength is independent of whether the halo is part of an obvious large-scale structure. Additionally, we find no measureable dependence of galaxy halo shape on membership of a filament. We also quantify the influence of tidal fields and find that these do correlate strongly with alignments of halos. The alignments of most halos are thus caused by tidal fields, with cluster-size halos being strongly aligned through the added mechanism of infall of matter from filaments.