The bright star $\pi$ Men was chosen as the first target for a radial velocity follow-up to test the performance of ESPRESSO, the new high-resolution spectrograph at the ESO's Very-Large Telescope (VLT). The star hosts a multi-planet system (a transiting 4 M$_\oplus$ planet at $\sim$0.07 au, and a sub-stellar companion on a $\sim$2100-day eccentric orbit) which is particularly appealing for a precise multi-technique characterization. With the new ESPRESSO observations, that cover a time span of 200 days, we aim to improve the precision and accuracy of the planet parameters and search for additional low-mass companions. We also take advantage of new photometric transits of $\pi$ Men c observed by TESS over a time span that overlaps with that of the ESPRESSO follow-up campaign. We analyse the enlarged spectroscopic and photometric datasets and compare the results to those in the literature. We further characterize the system by means of absolute astrometry with Hipparcos and Gaia. We used the spectra of ESPRESSO for an independent determination of the stellar fundamental parameters. We present a precise characterization of the planetary system around $\pi$ Men. The ESPRESSO radial velocities alone (with typical uncertainty of 10 cm/s) allow for a precise retrieval of the Doppler signal induced by $\pi$ Men c. The residuals show an RMS of 1.2 m/s, and we can exclude companions with a minimum mass less than $\sim$2 M$_\oplus$ within the orbit of $\pi$ Men c). We improve the ephemeris of $\pi$ Men c using 18 additional TESS transits, and in combination with the astrometric measurements, we determine the inclination of the orbital plane of $\pi$ Men b with high precision ($i_{b}=45.8^{+1.4}_{-1.1}$ deg). This leads to the precise measurement of its absolute mass $m_{b}=14.1^{+0.5}_{-0.4}$ M$_{Jup}$, and shows that the planetary orbital planes are highly misaligned.

Aims. Comparing theoretical models of exoplanet formation with observations allows one to make key step forward towards an understanding of planetary systems. It however requires a model able to (i) predict all the necessary observable quantities (not only masses and orbits, but also radii, luminosities, magnitudes, or evaporation rates) and (ii) address the large range in relevant planetary masses (from Mars mass to super-Jupiters) and distances (from stellar-grazing to wide orbits). Methods. We have developed a combined global planetary formation and evolution model that solves as directly as possible the underlying differential equations for the structure and evolution of the gas disc, the dynamical state of the planetesimals, the internal structure of the planets yielding their gas accretion rate and internal structure, the accretion rate of planetesimals, disc-driven orbital migration, and the gravitational interaction of concurrently forming planets via a full N-body calculation. Importantly, the model now also follows the long-term evolution of the planets on Gigayear timescales after formation including the effects of cooling and contraction, atmospheric escape, bloating, and stellar tides. Results. To test the model, we compared it with classical scenarios of Solar System formation. For the terrestrial planets, we find that we obtain a giant impact phase provided enough embryos (~100) are initially emplaced in the disc. For the giant planets, we find that Jupiter-mass planets must accrete their core shortly before the dispersal of the gas disc to prevent strong inward migration that would bring them to the inner edge of the disc. Conclusions. he model can form planetary systems with a wide range of properties. We find that giant-planet bearing systems are more diverse than the ones with only terrestrial planets.

Recent observational findings have suggested a positive correlation between the occurrence rates of inner super-Earths and outer giant planets. These results raise the question if the trend can be reproduced and explained by planet formation theory. Here, we investigate the properties of inner super-Earths and outer giant planets that form according to the core accretion picture. The aim of this research was to study mutual relations between these planet species in synthetic planet populations and to compare them to the observed exoplanet population. We invoke the Generation 3 Bern model of planet formation and evolution to simulate 1000 multi-planet systems. We then confront these synthetic systems with the observed sample, taking into account the detection bias that distorts the observed demographics. The formation of warm super-Earths and cold Jupiters in the same system is enhanced compared to the individual appearances, albeit weaker than proposed by observations. We attribute the discrepancy to dynamically active giant planets, which frequently disrupt inner super-Earth systems in the synthetic population. This result could be interpreted as an overestimation of the migration rates predicted by giant planet migration theory. We further find differences in the volatile content of planets in different system architectures and predict that high-density super-Earths are more likely to host an outer giant. This correlation can be tested observationally. Finally, super-Earth occurrence shows a negative correlation with metallicity in giant-hosting systems. The reason for this is that giant planets around high-metallicity stars are frequently dynamically active, which poses a threat to inner planetary systems.

We want to understand the global observable consequences of different physical processes and the initial system properties on the demographics of the planetary population. We select distributions of initial conditions that are representative of known protoplanetary discs and we use the Bern model to synthesise five planetary populations around 1 Sun-mass stars. Each population has a different initial number of Moon-mass embryos per disc to test for convergence: 1, 10, 20, 50, and 100. The last one is our nominal planetary population. The properties of giant planets do not change much starting with 10 embryos per system. For terrestrial planets inside 1 au, only the 100-embryos population is able to attain the giant-impact stage. In that population, each system contains 8 planets larger than 1 $M_\oplus$ on average. The fraction of systems with giants planets at all orbital distances is 18%, but only 1.6% are at > 10 au. Systems with giants contain on average 1.6 such planets. Inside of 1 au, the planet type with the highest occurrence rate and multiplicity are super-Earths (2.4 and 3.7), followed by terrestrial planets (1.6 and 2.8). Their frequency peaks at a stellar [Fe/H] of 0.0 and -0.2 respectively. The frequency of more massive planet types (Neptunian, giants) increases monotonically with [Fe/H]. Low-mass planets in the habitable zone are found around 44% of the stars with a multiplicity of 1.3, with a mean [Fe/H] of -0.11. This is one of the most comprehensive simulations of planetary system formation and evolution to date. For observations, the syntheses provide a large data set to search for comparison synthetic systems that show how they formed. For theory, they provide the framework to observationally test the consequences of specific physical processes. This is a important ingredient towards the development of a standard model of planetary formation and evolution.

We characterized the transiting planetary system orbiting the G2V star K2-38 using the new-generation echelle spectrograph ESPRESSO. We carried out a photometric analysis of the available K2 photometric light curve of this star to measure the radius of its two known planets. Using 43 ESPRESSO high-precision radial velocity measurements taken over the course of 8 months along with the 14 previously published HIRES RV measurements, we modeled the orbits of the two planets through a MCMC analysis, significantly improving their mass measurements. Using ESPRESSO spectra, we derived the stellar parameters, $T_{\rm eff}$=5731$\pm$66, $\log g$=4.38$\pm$0.11~dex, and $[Fe/H]$=0.26$\pm$0.05~dex, and thus the mass and radius of K2-38, $M_{\star}$=1.03 $^{+0.04}_{-0.02}$~M$_{\oplus}$ and $R_{\star}$=1.06 $^{+0.09}_{-0.06}$~R$_{\oplus}$. We determine new values for the planetary properties of both planets. We characterize K2-38b as a super-Earth with $R_{\rm P}$=1.54$\pm$0.14~R$_{\rm \oplus}$ and $M_{\rm p}$=7.3$^{+1.1}_{-1.0}$~M$_{\oplus}$, and K2-38c as a sub-Neptune with $R_{\rm P}$=2.29$\pm$0.26~R$_{\rm \oplus}$ and $M_{\rm p}$=8.3$^{+1.3}_{-1.3}$~M$_{\oplus}$. We derived a mean density of $\rho_{\rm p}$=11.0$^{+4.1}_{-2.8}$~g cm$^{-3}$ for K2-38b and $\rho_{\rm p}$=3.8$^{+1.8}_{-1.1}$~g~cm$^{-3}$ for K2-38c, confirming K2-38b as one of the densest planets known to date. The best description for the composition of K2-38b comes from an iron-rich Mercury-like model, while K2-38c is better described by a rocky model with a H2 envelope. The maximum collision stripping boundary shows how giant impacts could be the cause for the high density of K2-38b. The irradiation received by each planet places them on opposite sides of the radius valley. We find evidence of a long-period signal in the radial velocity time-series whose origin could be linked to a 0.25-3~M$_{\rm J}$ planet or stellar activity.

Exoplanet characterization is one of the main foci of current exoplanetary science. For super-Earths and sub-Neptunes, we mostly rely on mass and radius measurements, which allow to derive the body's mean density and give a rough estimate of the planet's bulk composition. However, the determination of planetary interiors is a very challenging task. In addition to the uncertainty in the observed fundamental parameters, theoretical models are limited due to the degeneracy in determining the planetary composition. We aim to study several aspects that affect internal characterization of super-Earths and sub-Neptunes: observational uncertainties, location on the M-R diagram, impact of additional constraints as bulk abundances or irradiation, and model assumptions. We use a full probabilistic Bayesian inference analysis that accounts for observational and model uncertainties. We employ a Nested Sampling scheme to efficiently produce the posterior probability distributions for all the planetary structural parameter of interest. We include a structural model based on self-consistent thermodynamics of core, mantle, high-pressure ice, liquid water, and H-He envelope. Regarding the effect of mass and radius uncertainties on the determination of the internal structure, we find three different regimes: below the Earth-like composition line and above the pure-water composition line smaller observational uncertainties lead to better determination of the core and atmosphere mass respectively, and between them structure characterization only weakly depends on the observational uncertainties. We show that small variations in the temperature or entropy profiles lead to radius variations that are comparable to the observational uncertainty, suggesting that uncertainties linked to model assumptions can become more relevant to determine the internal structure than observational uncertainties.

Planet formation theory suggests that planet bulk compositions are likely to reflect the chemical abundance ratios of their host star's photosphere. Variations in the abundance of particular chemical species in stellar photospheres between different galactic stellar populations demonstrate that there are differences among the expected solid planet bulk compositions. We aim to present planetary mass-radius relations of solid planets for kinematically differentiated stellar populations, namely, the thin disc, thick disc, and halo. Using two separate internal structure models, we generated synthetic planets using bulk composition inputs derived from stellar abundances. We explored two scenarios, specifically iron-silicate planets at 0.1 AU and silicate-iron-water planets at 4 AU. We show that there is a persistent statistical difference in the expected mass-radius relations of solid planets among the different galactic stellar populations. At 0.1 AU for silicate-iron planets, there is a 1.51 to 2.04\% mean planetary radius difference between the thick and thin disc stellar populations, whilst for silicate-iron-water planets past the ice line at 4 AU, we calculate a 2.93 to 3.26\% difference depending on the models. Between the halo and thick disc, we retrieve at 0.1 AU a 0.53 to 0.69\% mean planetary radius difference, and at 4 AU we find a 1.24 to 1.49\% difference depending on the model. Future telescopes (such as PLATO) will be able to precisely characterize solid exoplanets and demonstrate the possible existence of planetary mass-radius relationship variability between galactic stellar populations.

In the core accretion scenario, a massive core forms first and then accretes an envelope. When discussing how this core forms some divergences appear. First scenarios of planet formation predict the accretion of km-sized bodies, called planetesimals, while more recent works suggest growth by accretion of pebbles, which are cm-sized objects. These two accretion models are often discussed separately and we aim here at comparing the outcomes of the two models with identical initial conditions. We use two distinct codes: one computing planetesimal accretion, the other pebble accretion. Using a population synthesis approach, we compare planet simulations and study the impact of the two solid accretion models, focussing on the formation of single planets. We find that the planetesimal model predicts the formation of more giant planets, while the pebble accretion model forms more super-Earth mass planets. This is due to the pebble isolation mass concept, which prevents planets formed by pebble accretion to accrete gas efficiently before reaching Miso. This translates into a population of planets that are not heavy enough to accrete a consequent envelope but that are in a mass range where type I migration is very efficient. We also find higher gas mass fractions for a given core mass for the pebble model compared to the planetesimal one caused by luminosity differences. This also implies planets with lower densities which could be confirmed observationally. Focusing on giant planets, we conclude that the sensitivity of their formation differs: for the pebble accretion model, the time at which the embryos are formed, as well as the period over which solids are accreted strongly impact the results, while for the planetesimal model it depends on the planetesimal size and on the splitting in the amount of solids available to form planetesimals.

We aim to confirm the presence of Proxima b using independent measurements obtained with the new ESPRESSO spectrograph, and refine the planetary parameters taking advantage of its improved precision. We analysed 63 spectroscopic ESPRESSO observations of Proxima taken during 2019. We obtained radial velocity measurements with a typical radial velocity photon noise of 26 cm/s. We ran a joint MCMC analysis on the time series of the radial velocity and full-width half maximum of the cross-correlation function to model the planetary and stellar signals present in the data, applying Gaussian process regression to deal with stellar activity. We confirm the presence of Proxima b independently in the ESPRESSO data. The ESPRESSO data on its own shows Proxima b at a period of 11.218 $\pm$ 0.029 days, with a minimum mass of 1.29 $\pm$ 0.13 Me. In the combined dataset we measure a period of 11.18427 $\pm$ 0.00070 days with a minimum mass of 1.173 $\pm$ 0.086 Me. We find no evidence of stellar activity as a potential cause for the 11.2 days signal. We find some evidence for the presence of a second short-period signal, at 5.15 days with a semi-amplitude of merely 40 cm/s. If caused by a planetary companion, it would correspond to a minimum mass of 0.29 $\pm$ 0.08 Me. We find that the FWHM of the CCF can be used as a proxy for the brightness changes and that its gradient with time can be used to successfully detrend the radial velocity data from part of the influence of stellar activity. The activity-induced radial velocity signal in the ESPRESSO data shows a trend in amplitude towards redder wavelengths. Velocities measured using the red end of the spectrograph are less affected by activity, suggesting that the stellar activity is spot-dominated. The data collected excludes the presence of extra companions with masses above 0.6 Me at periods shorter than 50 days.

Ultra-hot giant exoplanets receive thousands of times Earth's insolation. Their high-temperature atmospheres (>2,000 K) are ideal laboratories for studying extreme planetary climates and chemistry. Daysides are predicted to be cloud-free, dominated by atomic species and substantially hotter than nightsides. Atoms are expected to recombine into molecules over the nightside, resulting in different day-night chemistry. While metallic elements and a large temperature contrast have been observed, no chemical gradient has been measured across the surface of such an exoplanet. Different atmospheric chemistry between the day-to-night ("evening") and night-to-day ("morning") terminators could, however, be revealed as an asymmetric absorption signature during transit. Here, we report the detection of an asymmetric atmospheric signature in the ultra-hot exoplanet WASP-76b. We spectrally and temporally resolve this signature thanks to the combination of high-dispersion spectroscopy with a large photon-collecting area. The absorption signal, attributed to neutral iron, is blueshifted by -11+/-0.7 km s-1 on the trailing limb, which can be explained by a combination of planetary rotation and wind blowing from the hot dayside. In contrast, no signal arises from the nightside close to the morning terminator, showing that atomic iron is not absorbing starlight there. Iron must thus condense during its journey across the nightside.

One of the main scientific drivers for ESPRESSO,\'Echelle SPectrograph, is the detection and characterization of Earth-class exoplanets. With this goal in mind, the ESPRESSO Guaranteed Time Observations (GTO) Catalog identifies the best target stars for a blind search for the radial velocity (RV) signals caused by Earth-class exoplanets. Using the most complete stellar catalogs available, we screened for the most suitable G, K, and M dwarf stars for the detection of Earth-class exoplanets with ESPRESSO. For most of the stars, we then gathered high-resolution spectra from new observations or from archival data. We used these spectra to spectroscopically investigate the existence of any stellar binaries, both bound or background stars. We derived the activity level using chromospheric activity indexes using $log(R'_{HK})$, as well as the projected rotational velocity $\textit{v sin i}$. For the cases where planet companions are already known, we also looked at the possibility that additional planets may exist in the host's habitable zone using dynamical arguments. We estimated the spectroscopic contamination level, $\textit{v sin i}$, activity, stellar parameters and chemical abundances for 249 of the most promising targets. Using these data, we selected 45 stars that match our criteria for detectability of a planet like Earth. The stars presented and discussed in this paper constitute the ESPRESSO GTO catalog for the RV blind search for Earth-class planets. They can also be used for any other work requiring a detailed spectroscopic characterization of stars in the solar neighborhood.

We present a study on the formation of planetary systems around low mass stars similar to Trappist-1, through the accretion of either planetesimals or pebbles. The aim is to determine if the currently observed systems around low mass stars favour one scenario over the other. We ran numerous N-body simulations, coupled to a thermally evolving viscous disc model, including prescriptions for planet migration and photoevaporation. We examine the differences between the pebble and planetesimal accretion scenarios, but also look at the influences of disc mass, planetesimal size, and the percentage of solids locked up within pebbles. When comparing the resulting planetary systems to Trappist-1, we find that a wide range of initial conditions for both accretion scenarios can form planetary systems similar to Trappist-1, in terms of planet mass, periods, and resonant configurations. Typically these planets formed exterior to the water iceline and migrated in resonant convoys to close to the central star. When comparing the planetary systems formed from pebbles to those formed from planetesimals, we find a large number of similarities, including average planet masses, eccentricities, inclinations and period ratios. One major difference was that of the water content of the planets. When including the effects of ablation and full recycling of the planets envelope with the disc, planets formed from pebbles were extremely dry, whilst those formed from planetesimals were extremely wet. If the water content is not fully recycled and instead falls to the planets core, or if ablation of the water is neglected, then the planets formed from pebbles are extremely wet, similar to those formed from planetesimals. Should the water content of the Trappist-1 planets be determined accurately, this could point to a preferred formation pathway for planetary systems, or to specific physics that may be at play.

Context. The composition of a protoplanetary disk at a given location does not only depend on temperature and pressure but also on the time dependent transport of matter, such as radial drift of solid bodies, which could release water and other volatile species before disintegration or accretion onto a larger body with potentially considerable implications for the composition of planets. Aims. We perform a parameter study focused on the water depletion of different sized bodies able to cross the water snowline by gas induced radial drift. Methods. Either the analytical Hertz-Knudsen-Langmuir sublimation formula assuming equilibrium temperature within the body or a more involved, numerical model for the internal thermal evolution is coupled with an alpha-disk model. Different properties of the disk and the embedded body are explored. Results. Bodies with radii up to 100 meter drift faster towards the central star than the water snowline, hence, cross it. The region that can be reached before complete disintegration - and is therefore polluted with H2O ice - extends to 10 percent closer to the star than the snowline location. The extent of this polluted region could be multiple times larger in the presence of a dust mantle, which is, however, unlikely to form due to frequent collisions with smaller-than centimeter sized objects. Conclusions. Given a significant abundance of meter sized boulders in protoplanetary disks, the transport of water by radial drift of these bodies towards regions closer to the star than the snowline is not negligible and this flux of volatiles can be estimated for a given distribution of solid body sizes and compositions. A simple expression for surface sublimation is applicable for a homogeneous body consisting of only dust and water ice without a dust mantle.

The Kepler, K2 and TESS transit surveys are revolutionizing our understanding of planets orbiting close to their host stars and our understanding of exoplanet systems in general, but there remains a gap in our understanding of wide-orbit planets. This gap in our understanding must be filled if we are to understand planet formation and how it affects exoplanet habitability. We summarize current and planned exoplanet detection programs using a variety of methods: microlensing (including WFIRST), radial velocities, Gaia astrometry, and direct imaging. Finally, we discuss the prospects for joint analyses using results from multiple methods and obstacles that could hinder such analyses. We endorse the findings and recommendations published in the 2018 National Academy report on Exoplanet Science Strategy. This white paper extends and complements the material presented therein.

Computing the mass of planetary envelopes and the critical mass beyond which planets accrete gas in a runaway fashion is important when studying planet formation, in particular for planets up to the Neptune mass range. This computation requires in principle solving a set of differential equations, the internal structure equations, for some boundary conditions (pressure, temperature in the protoplanetary disk where a planet forms, core mass and accretion rate of solids by the planet). Solving these equations in turn proves being time consuming and sometimes numerically unstable. We developed a method to approximate the result of integrating the internal structure equations for a variety of boundary conditions. We compute a set of planet internal structures for a very large number (millions) of boundary conditions, considering two opacities,(ISM and reduced). This database is then used to train Deep Neural Networks in order to predict the critical core mass as well as the mass of planetary envelopes as a function of the boundary conditions. We show that our neural networks provide a very good approximation (at the level of percents) of the result obtained by solving interior structure equations, but with a much smaller required computer time. The difference with the real solution is much smaller than the one obtained using some analytical formulas available in the literature which at best only provide the correct order of magnitude. We compare the results of the DNN with other popular machine learning methods (Random Forest, Gradient Boost, Support Vector Regression) and show that the DNN outperforms these methods by a factor of at least two. We show that some analytical formulas that can be found in various papers can severely overestimate the mass of planets, therefore predicting the formation of planets in the Jupiter-mass regime instead of the Neptune-mass regime.

In contrast to the water-poor inner solar system planets, stochasticity during planetary formation and order of magnitude deviations in exoplanet volatile contents suggest that rocky worlds engulfed in thick volatile ice layers are the dominant family of terrestrial analogues among the extrasolar planet population. However, the distribution of compositionally Earth-like planets remains insufficiently constrained, and it is not clear whether the solar system is a statistical outlier or can be explained by more general planetary formation processes. Here we employ numerical models of planet formation, evolution, and interior structure, to show that a planet's bulk water fraction and radius are anti-correlated with initial $^{26}$Al levels in the planetesimal-based accretion framework. The heat generated by this short-lived radionuclide rapidly dehydrates planetesimals prior to accretion onto larger protoplanets and yields a system-wide correlation of planet bulk abundances, which, for instance, can explain the lack of a clear orbital trend in the water budgets of the TRAPPIST-1 planets. Qualitatively, our models suggest two main scenarios of planetary systems' formation: high-$^{26}$Al systems, like our solar system, form small, water-depleted planets, whereas those devoid of $^{26}$Al predominantly form ocean worlds, where the mean planet radii between both scenarios deviate by up to about 10%.

Planet formation models are now often considering the formation of planetary systems, with more than one planet per system. This raises the question of how to represent planetary systems in a convenient way, (e.g. for visualisation purpose) and how to define the similarity between two planetary systems, for example to compare models and observations. We define a new metric to infer the similarity between two planetary systems, based on the properties of planets that belong to these systems. We then compare the similarity of planetary systems with the similarity of protoplanetary discs in which they form. We first define a new metric based on mixture of gaussians, and then use this metric to apply a dimensionality reduction technique, in order to represent planetary systems (which should be represented in a high dimension space) in a 2 dimension space. This allows us study the structure of a population of planetary systems and its relation with the characteristics of protoplanetary discs in which planetary systems form. We show that the new metric can help finding the underlying structure of populations of planetary systems. In addition, the similarity between planetary systems as we define in this paper is correlated with the similarity between the protoplanetary discs in which these systems form. We finally compare the distribution of inter-system distances for a set of observed exoplanets, with the distributions obtained from two models: a population synthesis model, and a model where planetary systems are constructed by randomly picking synthetic planets. The observed distribution is shown to be closer to the one derived from the population synthesis model than from the random systems.

We compare the planet-to-star mass-ratio distribution measured by gravitational microlensing to core accretion theory predictions from population synthesis models. The core accretion theory's runaway gas accretion process predicts a dearth of intermediate-mass giant planets that is not seen in the microlensing results. In particular, the models predict $\sim10\,\times$ fewer planets at mass ratios of $10^{-4} \leq q \leq 4 \times 10^{-4}$ than inferred from microlensing observations. This tension implies that gas giant formation may involve processes that have hitherto been overlooked by existing core accretion models or that the planet-forming environment varies considerably as a function of host-star mass. Variation from the usual assumptions for the protoplanetary disk viscosity and thickness could reduce this discrepancy, but such changes might conflict with microlensing results at larger or smaller mass ratios, or with other observations. The resolution of this discrepancy may have important implications for planetary habitability because it has been suggested that the runaway gas accretion process may have triggered the delivery of water to our inner solar system. So, an understanding of giant planet formation may help us to determine the occurrence rate of habitable planets.

The standard model for giant planet formation is based on the accretion of solids by a growing planetary embryo, followed by rapid gas accretion once the planet exceeds a so-called critical mass. The dominant size of the accreted solids (cm-size particles named pebbles or km to hundred km-size bodies named planetesimals) is, however, unknown. Recently, high-precision measurements of isotopes in meteorites provided evidence for the existence of two reservoirs in the early Solar System. These reservoirs remained separated from ~1 until ~ 3 Myr after the beginning of the Solar System's formation. This separation is interpreted as resulting from Jupiter growing and becoming a barrier for material transport. In this framework, Jupiter reached ~20 Earth masses within ~1 Myr and slowly grew to ~50 Earth masses in the subsequent 2 Myr before reaching its present-day mass. The evidence that Jupiter slowed down its growth after reaching 20 Earth masses for at least 2 Myr is puzzling because a planet of this mass is expected to trigger fast runaway gas accretion. Here, we use theoretical models to describe the conditions allowing for such a slow accretion and show that Jupiter grew in three distinct phases. First, rapid pebble accretion brought the major part of Jupiter's core mass. Second, slow planetesimal accretion provided the energy required to hinder runaway gas accretion during 2 Myr. Third, runaway gas accretion proceeded. Both pebbles and planetesimals therefore have an important role in Jupiter's formation.

One of the main scenarios of planet formation is the core accretion model where a massive core forms first and then accretes a gaseous envelope. This core forms by accreting solids, either planetesimals, or pebbles. A key constraint in this model is that the accretion of gas must proceed before the dissipation of the gas disc. Classical planetesimal accretion scenario predicts that the time needed to form a giant planets core is much longer than the time needed to dissipate the disc. This difficulty led to the development of another accretion scenario, in which cores grow by accretion of pebbles, which are much smaller and thus more easily accreted, leading to a more rapid formation. The aim of this paper is to compare our updated pebble-based planet formation model with observations, in particular the well studied metallicity effect. We adopt the Bitsch et al. 2015a disc model and the Bitsch et al. 2015b pebble model and use a population synthesis approach to compare the formed planets with observations. We find that keeping the same parameters as in Bitsch et al. 2015b leads to no planet growth due to a computation mistake in the pebble flux (Bitsch et al. 2017). Indeed a large fraction of the heavy elements should be put into pebbles (Zpeb/Ztot = 0.9) in order to form massive planets using this approach. The resulting mass functions show a huge amount of giants and a lack of Neptune mass planets, which are abundant according to observations. To overcome this issue we include the computation of the internal structure for the planetary atmosphere to our model. This leads to the formation of Neptune mass planets but no observable giants. Reducing the opacity of the planetary envelope finally matches observations better. We conclude that modeling the internal structure for the planetary atmosphere is necessary to reproduce observations.

Interior characterization traditionally relies on individual planetary properties, ignoring correlations between different planets of the same system. For multi-planetary systems, planetary data are generally correlated. This is because, the differential masses and radii are better constrained than absolute planetary masses and radii. We explore such correlations and data specific to the multiplanetary-system of TRAPPIST-1 and study their value for our understanding of planet interiors. Furthermore, we demonstrate that the rocky interior of planets in a multi-planetary system can be preferentially probed by studying the most dense planet representing a rocky interior analogue. Our methodology includes a Bayesian inference analysis that uses a Markov chain Monte Carlo scheme. Our interior estimates account for the anticipated variability in the compositions and layer thicknesses of core, mantle, water oceans and ice layers, and a gas envelope. Our results show that (1) interior estimates significantly depend on available abundance proxies and (2) that the importance of inter-dependent planetary data for interior characterization is comparable to changes in data precision by 30 %. For the interiors of TRAPPIST-1 planets, we find that possible water mass fractions generally range from 0-25 %. The lack of a clear trend of water budgets with orbital period or planet mass challenges possible formation scenarios. While our estimates change relatively little with data precision, they critically depend on data accuracy. If planetary masses varied within ~24 %, interiors would be consistent with uniform (~7 %) or an increasing water mass fractions with orbital period (~2-12 %).

When a planet becomes massive enough, it gradually carves a partial gap around its orbit in the protoplanetary disk. A pressure maximum can be formed outside the gap where solids that are loosely coupled to the gas, typically in the pebble size range, can be trapped. The minimum planet mass for building such a trap, which is called the pebble isolation mass (PIM), is important for two reasons: it marks the end of planetary growth by pebble accretion, and the trapped dust forms a ring that may be observed with millimetre observations. We study the effect of disk turbulence on the pebble isolation mass and find its dependence on the gas turbulent viscosity, aspect ratio, and particles Stokes number. By means of 2D gas hydrodynamical simulations, we found the minimum planet mass to form a radial pressure maximum beyond the orbit of the planet, which is the necessary condition to trap pebbles. We then carried out 2D gas plus dust hydrodynamical simulations to examine how dust turbulent diffusion impacts particles trapping at the pressure maximum. We finally provide a semi-analytical calculation of the PIM based on comparing the radial drift velocity of solids and the root mean square turbulent velocity fluctuations around the pressure maximum. From our results of gas simulations, we provide an expression for the PIM versus disk aspect ratio and turbulent viscosity. Our gas plus dust simulations show that the effective PIM can be nearly an order of magnitude larger in high-viscosity disks because turbulence diffuse particles out of the pressure maximum. This is quantified by our semi-analytical calculation, which gives an explicit dependence of the PIM with Stokes number of particles. We conclude than disk turbulence can significantly alter the PIM, depending on the level of turbulence in regions of planet formation.

Planetesimal formation stage represents a major gap in our understanding of the planet formation process. The late-stage planet accretion models typically make arbitrary assumptions about planetesimals and pebbles distribution while the dust evolution models predict that planetesimal formation is only possible at some orbital distances. We want to test the importance of water snow line for triggering formation of the first planetesimals during the gas-rich phase of protoplanetary disk, when cores of giant planets have to form. We connect prescriptions for gas disk evolution, dust growth and fragmentation, water ice evaporation and recondensation, as well as transport of both solids and water vapor, and planetesimal formation via streaming instability into a single, one-dimensional model for protoplanetary disk evolution. We find that processes taking place around the snow line facilitate planetesimal formation in two ways. First, due to the change of sticking properties between wet and dry aggregates, there is a "traffic jam" inside of the snow line that slows down the fall of solids onto the star. Second, ice evaporation and outward diffusion of water followed by its recondensation increases the abundance of icy pebbles that trigger planetesimal formation via streaming instability just outside of the snow line. Planetesimal formation is hindered by growth barriers and radial drift and thus requires particular conditions to take place. Snow line is a favorable location where planetesimal formation is possible for a wide range of conditions, but still not in every protoplanetary disk model. This process is particularly promoted in large, cool disks with low intrinsic turbulence and increased initial dust-to-gas ratio.

We analyze the emission spectrum of the hot Jupiter WASP-12b using our HELIOS-R retrieval code and HELIOS-K opacity calculator. When interpreting Hubble and Spitzer data, the retrieval outcomes are found to be prior-dominated. When the prior distributions of the molecular abundances are assumed to be log-uniform, the volume mixing ratio of HCN is found to be implausibly high. A VULCAN chemical kinetics model of WASP-12b suggests that chemical equilibrium is a reasonable assumption even when atmospheric mixing is implausibly rigorous. Guided by (exo)planet formation theory, we set Gaussian priors on the elemental abundances of carbon, oxygen and nitrogen with the Gaussian peaks being centered on the measured C/H, O/H and N/H values of the star. By enforcing chemical equilibrium, we find substellar O/H and stellar to slightly superstellar C/H for the dayside atmosphere of WASP-12b. The superstellar carbon-to-oxygen ratio is just above unity, regardless of whether clouds are included in the retrieval analysis, consistent with Madhusudhan et al. (2011). Furthermore, whether a temperature inversion exists in the atmosphere depends on one's assumption for the Gaussian width of the priors. Our retrieved posterior distributions are consistent with the formation of WASP-12b in a solar-composition protoplanetary disk, beyond the water iceline, via gravitational instability or pebble accretion (without core erosion) and migration inwards to its present orbital location via a disk-free mechanism, and are inconsistent with both in-situ formation and core accretion with disk migration, as predicted by Madhusudhan et al. (2017). We predict that the interpretation of James Webb Space Telescope WASP-12b data will not be prior-dominated.

The surface rotations of some red giants are so fast that they must have been spun up by tidal interaction with a close companion, either another star, a brown dwarf, or a planet. We focus here on the case of red giants that are spun up by tidal interaction with a planet. When the distance between the planet and the star decreases, the spin period of the star decreases, the orbital period of the planet decreases, and the reflex motion of the star increases. We study the change rate of these three quantities when the circular orbit of a planet of 15 M$_{J}$ that initially orbits a 2 M$_\odot$ star at 1 au shrinks under the action of tidal forces during the red giant phase. We use stellar evolution models coupled with computations of the orbital evolution of the planet, which allows us to follow the exchanges of angular momentum between the star and the orbit in a consistent way. We obtain that the reflex motion of the red giant star increases by more than 1 m s$^{-1}$ per year in the last $\sim$40 years before the planet engulfment. During this phase, the reflex motion of the star is between 660 and 710 m s$^{-1}$. The spin period of the star increases by more than about 10 minutes per year in the last 3000 y before engulfment. During this period, the spin period of the star is shorter than 0.7 year. During this same period, the variation in orbital period, which is shorter than 0.18 year, is on the same order of magnitude. Changes in reflex-motion and spin velocities are very small and thus most likely out of reach of being observed. The most promising way of detecting this effect is through observations of transiting planets, that is, through{\it } changes of the beginning or end of the transit. A space mission like PLATO might be of great interest for detecting planets that are on the verge of being engulfed by red giants.

Observations of hot Jupiter type exoplanets suggest that their orbital period distribution depends on the metallicity of their host star. We investigate here whether the impact of the stellar metallicity on the evolution of the tidal dissipation inside the convective envelope of rotating stars and its resulting effect on the planetary migration might be a possible explanation for this observed statistical trend. We use a frequency-averaged tidal dissipation formalism coupled to an orbital evolution code and to rotating stellar evolution models to estimate the effect of a change of stellar metallicity on the evolution of close-in planets. We consider here two different stellar masses: 0.4 and 1.0 $M_{\odot}$ evolving from the early pre-main sequence phase up to the red giant branch. We show that the metallicity of a star has a strong effect on the stellar parameters which in turn strongly influence the tidal dissipation in the convective region. While on the pre-main sequence the dissipation of a metal poor Sun-like star is higher than the dissipation of a metal rich Sun-like star, on the main sequence it is the opposite. However, for the $0.4~M_{\odot}$ star, the dependence of the dissipation with metallicity is much less visible. Using an orbital evolution model, we show that changing the metallicity leads to different orbital evolutions (e.g., planets migrate farther out from an initially fast rotating metal rich star). By using this model, we qualitatively reproduced the observational trends of the population of hot Jupiters with the metallicity of their host stars. However, more steps are needed to improve our model to try to quantitatively fit our results to the observations. Namely, we need to improve the treatment of the rotation evolution in the orbital evolution model and ultimately we need to consistently couple of the orbital model to the stellar evolution model.

We compute the maximum mass a growing planetary embryo can reach depending on the size of accreted planetesimals or pebbles, to infer the possibility of growing the cores of giant planets, and giant planets themselves. We compute the internal structure of the gas envelope of planetary embryos, to determine the core mass that is necessary to bind an envelope large enough to destroy planetesimals or pebbles while they are gravitationally captured. We also consider the effect of the advection wind originating from the protoplanetary disk, following the results of Ormel et al. (2015). We show that for low mass pebbles, once the planetary embryo is larger than ~1 Mearth, the envelope is large enough to destroy and vaporize pebbles completely before they can reach the core. The material constituting pebbles is therefore released in the planetary envelope, and later on dispersed in the protoplanetary disk, if the advection wind is strong enough. As a consequence the growth of the planetary embryo is stopped at a mass that is so small that Kelvin-Helmholtz accretion cannot lead to the accretion of significant amounts of gas. For larger planetesimals, a similar process occurs but at much larger mass, of the order of ten Earth masses, and is followed by rapid accretion of gas. If the effect of the advection is as efficient as described in Ormel al. (2015), the combined effect of the vaporization of accreted solids in the envelope of forming planetary embryos, and of this advection wind, prevents the growth of the planets at masses smaller or similar to the Earth mass in the case of formation by pebble accretion, up to a distance of the order of 10 AU. In the case of formation by accretion of large mass planetesimals, the growth of the planetary core is limited at masses ~10 Mearth but further growth of the planet can proceed by gas accretion.

We aim to present a generalized Bayesian inference method for constraining interiors of super Earths and sub-Neptunes. Our methodology succeeds in quantifying the degeneracy and correlation of structural parameters for high dimensional parameter spaces. Specifically, we identify what constraints can be placed on composition and thickness of core, mantle, ice, ocean, and atmospheric layers given observations of mass, radius, and bulk refractory abundance constraints (Fe, Mg, Si) from observations of the host star's photospheric composition. We employed a full probabilistic Bayesian inference analysis that formally accounts for observational and model uncertainties. Using a Markov chain Monte Carlo technique, we computed joint and marginal posterior probability distributions for all structural parameters of interest. We included state-of-the-art structural models based on self-consistent thermodynamics of core, mantle, high-pressure ice, and liquid water. Furthermore, we tested and compared two different atmospheric models that are tailored for modeling thick and thin atmospheres, respectively. First, we validate our method against Neptune. Second, we apply it to synthetic exoplanets of fixed mass and determine the effect on interior structure and composition when (1) radius, (2) atmospheric model, (3) data uncertainties, (4) semi-major axes, (5) atmospheric composition (i.e., a priori assumption of enriched envelopes versus pure H/He envelopes), and (6) prior distributions are varied. Our main conclusions are: [...]

The recent detection of planets around very low mass stars raises the question of the formation, composition and potential habitability of these objects. We use planetary system formation models to infer the properties, in particular their radius distribution and water content, of planets that may form around stars ten times less massive than the Sun. Our planetary system formation and composition models take into account the structure and evolution of the protoplanetary disk, the planetary mass growth by accretion of solids and gas, as well as planet-planet, planet-star and planet-disk interactions. We show that planets can form at small orbital period in orbit about low mass stars. We show that the radius of the planets is peaked at about 1 rearth and that they are, in general, volatile rich especially if proto-planetary discs orbiting this type of stars are long-lived. Close-in planets orbiting low-mass stars similar in terms of mass and radius to the ones recently detected can be formed within the framework of the core accretion paradigm as modeled here. The properties of protoplanetary disks, and their correlation with the stellar type, are key to understand their composition.

The consistency of planet formation models suffers from the disconnection between the regime of small and large bodies. This is primarily caused by so-called growth barriers: the direct growth of larger bodies is halted at centimetre-sized objects and particular conditions are required for the formation of larger, gravitationally bound planetesimals. We aim to connect models of dust evolution and planetesimal formation to identify regions of protoplanetary discs that are favourable for the formation of kilometre-sized bodies and the first planetary embryos. We combine semi-analytical models of viscous protoplanetary disc evolution, dust growth and drift including backreaction of the dust particles on the gas, and planetesimal formation via the streaming instability into one numerical code. We investigate how planetesimal formation is affected by the mass of the protoplanetary disc, its initial dust content, and the stickiness of dust aggregates. We find that the dust growth and drift leads to a global redistribution of solids. The pile-up of pebbles in the inner disc provides local conditions where the streaming instability is effective. Planetesimals form in an annulus with its inner edge lying between 0.3 AU and 1 AU and its width ranging from 0.3 AU to 3 AU. The resulting surface density of planetesimals follows a radial profile that is much steeper than the initial disc profile. These results support formation of terrestrial planets in the solar system from a narrow annulus of planetesimals, which reproduces their peculiar mass ratios.

We compute, for the first time, self-consistent models of planet growth including the effect of envelope enrichment. The change of envelope metallicity is assumed to be the result of planetesimal disruption or icy pebble sublimation. We solve internal structure equations taking into account global energy conservation for the envelope to compute in-situ planetary growth. We consider different opacities and equations of state suited for a wide range of metallicities. We find that envelope enrichment speeds up the formation of gas giants. It also explains naturally the formation of low and intermediate mass objects with large fractions of H-He (~ 20 - 30 % in mass). High opacity models explain well the metallicity of the giant planets of the solar system, whereas low opacity models are suited for forming small mass objects with thick H-He envelopes and gas giants with sub-solar envelope metallicities. We find good agreement between our models and the estimated water abundance for WASP-43b. For HD 189733b, HD 209458b and WASP-12b we predict fractions of water larger than what is estimated from observations, by at least a factor ~ 2. Envelope enrichment by icy planetesimals is the natural scenario to explain the formation of a large variety of objects, ranging from mini-Neptunes, to gas giants. We predict that the total and envelope metallicity decrease with planetary mass.

The search for small planets orbiting late M dwarfs holds the promise of detecting Earth-size planets for which their atmospheres could be characterised within the next decade. The recent discovery of TRAPPIST-1 entertains hope that these systems are common around hosts located at the bottom of the main sequence. In this Letter, we investigate the ability of the repurposed Kepler mission (K2) to probe planetary systems similar to TRAPPIST-1. We perform a consistent data analysis of 189 spectroscopically confirmed M5.5 to M9 late M dwarfs from campaigns 1-6 to search for planet candidates and inject transit signals with properties matching TRAPPIST-1b and c. We find no transiting planet candidates across our K2 sample. Our injection tests show that K2 is able to recover both TRAPPIST-1 planets for 10% of the sample only, mainly because of the inefficient throughput at red wavelengths resulting in Poisson-limited performance for these targets. Increasing injected planetary radii to match GJ1214b's size yields a recovery rate of 70%. The strength of K2 is its ability to probe a large number of cool hosts across the different campaigns, out of which the recovery rate of 10% may turn into bona-fide detections of TRAPPIST-1 like systems within the next two years.

The determination of the abundance of volatiles in extrasolar planets is very important as it can provide constraints on transport in protoplanetary disks and on the formation location of planets. However, constraining the internal structure of low-mass planets from transit measurements is known to be a degenerate problem. Using planetary structure and evolution models, we show how observations of transiting planets can be used to constrain their internal composition, in particular the amount of volatiles in the planetary interior, and consequently the amount of gas (defined in this paper to be only H and He) that the planet harbors. We show for low-mass gas-poor planets that are located close to their central star that assuming evaporation has efficiently removed the entire gas envelope, it is possible to constrain the volatile fraction of close-in transiting planets. We illustrate this method on the example of 55 Cnc e and show that under the assumption of the absence of gas, the measured mass and radius imply at least 20 % of volatiles in the interior. For planets at larger distances, we show that the observation of transiting planets at different evolutionary ages can be used to set statistical constraints on the volatile content of planets. These results can be used in the context of future missions like PLATO to better understand the internal composition of planets.

Ocean planets are volatile rich planets, not present in our Solar System, which are thought to be dominated by deep, global oceans. This results in the formation of high-pressure water ice, separating the planetary crust from the liquid ocean and, thus, also from the atmosphere. Therefore, instead of a carbonate-silicate cycle like on the Earth, the atmospheric carbon dioxide concentration is governed by the capability of the ocean to dissolve carbon dioxide (CO2). In our study, we focus on the CO2 cycle between the atmosphere and the ocean which determines the atmospheric CO2 content. The atmospheric amount of CO2 is a fundamental quantity for assessing the potential habitability of the planet's surface because of its strong greenhouse effect, which determines the planetary surface temperature to a large degree. In contrast to the stabilising carbonate-silicate cycle regulating the long-term CO2 inventory of the Earth atmosphere, we find that the CO2 cycle feedback on ocean planets is negative and has strong destabilising effects on the planetary climate. By using a chemistry model for oceanic CO2 dissolution and an atmospheric model for exoplanets, we show that the CO2 feedback cycle can severely limit the extension of the habitable zone for ocean planets.

Context. The chemical composition of planets is an important constraint for planet formation and subsequent differentiation. While theoretical studies try to derive the compositions of planets from planet formation models in order to link the composition and formation process of planets, other studies assume that the elemental ratios in the formed planet and in the host star are the same. Aims. Using a chemical model combined with a planet formation model, we aim to link the composition of stars with solar mass and luminosity with the composition of the hosted planets. For this purpose, we study the three most important elemental ratios that control the internal structure of a planet: Fe/Si, Mg/Si, and C/O. Methods. A set of 18 different observed stellar compositions was used to cover a wide range of these elemental ratios. The Gibbs energy minimization assumption was used to derive the composition of planets, taking stellar abundances as proxies for nebular abundances, and to generate planets in a self-consistent planet formation model. We computed the elemental ratios Fe/Si, Mg/Si and C/O in three types of planets (rocky, icy, and giant planets) formed in different protoplanetary discs, and compared them to stellar abundances. Results. We show that the elemental ratios Mg/Si and Fe/Si in planets are essentially identical to those in the star. Some deviations are shown for planets that formed in specific regions of the disc, but the relationship remains valid within the ranges encompassed in our study. The C/O ratio shows only a very weak dependence on the stellar value.

We present an inversion method based on Bayesian analysis to constrain the interior structure of terrestrial exoplanets, in the form of chemical composition of the mantle and core size. Specifically, we identify what parts of the interior structure of terrestrial exoplanets can be determined from observations of mass, radius, and stellar elemental abundances. We perform a full probabilistic inverse analysis to formally account for observational and model uncertainties and obtain confidence regions of interior structure models. This enables us to characterize how model variability depends on data and associated uncertainties. We test our method on terrestrial solar system planets and find that our model predictions are consistent with independent estimates. Furthermore, we apply our method to synthetic exoplanets up to 10 Earth masses and up to 1.7 Earth radii as well as to exoplanet Kepler-36b. Importantly, the inversion strategy proposed here provides a framework for understanding the level of precision required to characterize the interior of exoplanets. Our main conclusions are: (1) observations of mass and radius are sufficient to constrain core size; (2) stellar elemental abundances (Fe, Si, Mg) are key constraints to reduce degeneracy in interior structure models and to constrain mantle composition; (3) the inherent degeneracy in determining interior structure from mass and radius observations does not only depend on measurement accuracies but also on the actual size and density of the exoplanet. We argue that precise observations of stellar elemental abundances are central in order to place constraints on planetary bulk composition and to reduce model degeneracy. [...]

Exoplanet science is now in its full expansion, particularly after the CoRoT and Kepler space missions that led us to the discovery of thousands of extra-solar planets. The last decade has taught us that UV observations play a major role in advancing our understanding of planets and of their host stars, but the necessary UV observations can be carried out only by HST, and this is going to be the case for many years to come. It is therefore crucial to build a treasury data archive of UV exoplanet observations formed by a dozen "golden systems" for which observations will be available from the UV to the infrared. Only in this way we will be able to fully exploit JWST observations for exoplanet science, one of the key JWST science case.

Models of planet formation are mainly focused on the accretion and dynamical processes of the planets, neglecting their chemical composition. In this work, we calculate the condensation sequence of the different chemical elements for a low-mass protoplanetary disk around a solar-type star. We incorporate this sequence of chemical elements (refractory and volatile elements) in our semi-analytical model of planet formation which calculates the formation of a planetary system during its gaseous phase. The results of the semi-analytical model (final distributions of embryos and planetesimals) are used as initial conditions to develope N-body simulations that compute the post-oligarchic formation of terrestrial-type planets. The results of our simulations show that the chemical composition of the planets that remain in the habitable zone has similar characteristics to the chemical composition of the Earth. However, exist differences that can be associated to the dynamical environment in which they were formed.

We extend the results of planetary formation synthesis by computing the long-term evolution of synthetic systems from the clearing of the gas disk into the dynamical evolution phase. We use the symplectic integrator SyMBA to numerically integrate the orbits of planets for 100 Ma, using populations from previous studies as initial conditions.We show that within the populations studied, mass and semi-major axis distributions experience only minor changes from post-formation evolution. We also show that, depending upon their initial distribution, planetary eccentricities can statistically increase or decrease as a result of gravitational interactions. We find that planetary masses and orbital spacings provided by planet formation models do not result in eccentricity distributions comparable to observed exoplanet eccentricities, requiring other phenomena such as e.g. stellar fly-bys to account for observed eccentricities.

Context. Within the core accretion scenario of planetary formation, most simulations performed so far always assume the accreting envelope to have a solar composition. From the study of meteorite showers on Earth and numerical simulations, we know that planetesimals must undergo thermal ablation and disruption when crossing a protoplanetary envelope. Once the protoplanet has acquired an atmosphere, the primordial envelope gets enriched in volatiles and silicates from the planetesimals. This change of envelope composition during the formation can have a significant effect in the final atmospheric composition and on the formation timescale of giant planets. Aims. To investigate the physical implications of considering the envelope enrichment of protoplanets due to the disruption of icy planetesimals during their way to the core. Particular focus is placed on the effect on the critical core mass for envelopes where condensation of water can occur. Methods. Internal structure models are numerically solved with the implementation of updated opacities for all ranges of metallicities and the software CEA to compute the equation of state. CEA computes the chemical equilibrium for an arbitrary mixture of gases and allows the condensation of some species, including water. This means that the latent heat of phase transitions is consistently incorporated in the total energy budget. Results. The critical core mass is found to decrease significantly when an enriched envelope composition is considered in the internal structure equations. A particular strong reduction of the critical core mass is obtained for planets whose envelope metallicity is larger than Z=0.45 when the outer boundary conditions are suitable for condensation of water to occur in the top layers of the atmosphere. We show that this effect is qualitatively preserved when the atmosphere is out of chemical equilibrium.

In the standard model of core accretion, the cores of the giant planets form by the accretion of planetesimals. In this scenario, the evolution of the planetesimal population plays an important role in the formation of massive cores. Recently, we studied the role of planetesimal fragmentation in the in situ formation of a giant planet. However, the exchange of angular momentum between the planet and the gaseous disk causes the migration of the planet in the disk. In this new work, we incorporate the migration of the planet and globally study the role of planet migration in the formation of a massive core when the population of planetesimals evolves by planet accretion, migration due to the nebular drag, and fragmentation due to planetesimal collisions.

Solar and extrasolar planets are the subject of numerous studies aiming to determine their chemical composition and internal structure. In the case of extrasolar planets, the composition is important as it partly governs their potential habitability. Moreover, observational determination of chemical composition of planetary atmospheres are becoming available, especially for transiting planets. The present works aims at determining the chemical composition of planets formed in stellar systems of solar chemical composition. The main objective of this work is to provide valuable theoretical data for models of planet formation and evolution, and future interpretation of chemical composition of solar and extrasolar planets. We have developed a model that computes the composition of ices in planets in different stellar systems with the use of models of ice and planetary formation. We provide the chemical composition, ice/rock mass ratio and C:O molar ratio for planets in stellar systems of solar chemical composition. From an initial homogeneous composition of the nebula, we produce a wide variety of planetary chemical compositions as a function of the mass of the disk and distance to the star. The volatile species incorporated in planets are mainly composed of H2O, CO, CO2, CH3OH, and NH3. Icy or ocean planets have systematically higher values of molecular abundances compared to giant and rocky planets. Gas giant planets are depleted in highly volatile molecules such as CH4, CO, and N2 compared to icy or ocean planets. The ice/rock mass ratio in icy or ocean and gas giant planets is, respectively, equal at maximum to 1.01+-0.33 and 0.8+-0.5, and is different from the usual assumptions made in planet formation models, which suggested this ratio to be 2-3. The C:O molar ratio in the atmosphere of gas giant planets is depleted by at least 30% compared to solar value.

Solar and extrasolar comets and extrasolar planets are the subject of numerous studies in order to determine their chemical composition and internal structure. In the case of planetesimals, their compositions are important as they govern in part the composition of future planets. The present works aims at determining the chemical composition of icy planetesimals, believed to be similar to present day comets, formed in stellar systems of solar chemical composition. The main objective of this work is to provide valuable theoretical data on chemical composition for models of planetesimals and comets, and models of planet formation and evolution. We have developed a model that calculates the composition of ices formed during the cooling of the stellar nebula. Coupled with a model of refractory element formation, it allows us to determine the chemical composition and mass ratio of ices to rocks in icy planetesimals throughout in the protoplanetary disc. We provide relationships for ice line positions (for different volatile species) in the disc, and chemical compositions and mass ratios of ice relative to rock for icy planetesimals in stellar systems of solar chemical composition. From an initial homogeneous composition of the nebula, a wide variety of chemical compositions of planetesimals were produced as a function of the mass of the disc and distance to the star. Ices incorporated in planetesimals are mainly composed of H2O, CO, CO2, CH3OH, and NH3. The ice/rock mass ratio is equal to 1+-0.5 in icy planetesimals following assumptions. This last value is in good agreement with observations of solar system comets, but remains lower than usual assumptions made in planet formation models, taking this ratio to be of 2-3.

Despite the increase in observational data on exoplanets, the processes that lead to the formation of planets are still not well understood. But thanks to the high number of known exoplanets, it is now possible to look at them as a population that puts statistical constraints on theoretical models. A method that uses these constraints is planetary population synthesis. Its key element is a global model of planet formation and evolution that directly predicts observable planetary properties based on properties of the natal protoplanetary disk. To do so, global models build on many specialized models that address one specific physical process. We thoroughly review the physics of the sub-models included in global formation models. The sub-models can be classified as models describing the protoplanetary disk (gas and solids), the (proto)planet (solid core, gaseous envelope, and atmosphere), and finally the interactions (migration and N-body interaction). We compare the approaches in different global models and identify physical processes that require improved descriptions in future. We then address important results of population synthesis like the planetary mass function or the mass-radius relation. In these results, the global effects of physical mechanisms occurring during planet formation and evolution become apparent, and specialized models describing them can be put to the observational test. Due to their nature as meta models, global models depend on the development of the field of planet formation theory as a whole. Because there are important uncertainties in this theory, it is likely that global models will in future undergo significant modifications. Despite this, they can already now yield many testable predictions. With future global models addressing the geophysical characteristics, it should eventually become possible to make predictions about the habitability of planets.

The opacity due to grains in the envelope of a protoplanet regulates the accretion rate of gas during formation, thus the final bulk composition of planets with primordial H/He is a function of it. Observationally, for exoplanets with known mass and radius it is possible to estimate the bulk composition via internal structure models. We first determine the reduction factor of the ISM grain opacity f_opa that leads to gas accretion rates consistent with grain evolution models. We then compare the bulk composition of synthetic low-mass and giant planets at different f_opa with observations. For f_opa=1 (full ISM opacity) the synthetic low-mass planets have too small radii, i.e., too low envelope masses compared to observations. At f_opa=0.003, the value calibrated with the grain evolution models, synthetic and actual planets occupy similar mass-radius loci. The mean enrichment of giant planets relative to the host star as a function of planet mass M can be approximated as Z_p/Z_star = beta*(M/M_Jup)^alpha. We find alpha=-0.7 independent of f_opa in synthetic populations in agreement with the observational result (-0.71+-0.10). The absolute enrichment level decreases from beta=8.5 at f_opa=1 to 3.5 at f_opa=0. At f_opa=0.003 one finds beta=7.2 which is similar to the observational result (6.3+-1.0). We thus find observational hints that the opacity in protoplanetary atmospheres is much smaller than in the ISM even if the specific value of the grain opacity cannot be constrained here. The result for the enrichment of giant planets helps to distinguish core accretion and gravitational instability. In the simplest picture of core accretion where first a critical core forms and afterwards only gas is added, alpha=-1. If a core accretes all planetesimals inside the feeding zone, alpha=-2/3. The observational result lies between these values, pointing to core accretion as the formation mechanism.

With the increasing number of exoplanets discovered, statistical properties of the population as a whole become unique constraints on planet formation models provided a link between the description of the detailed processes playing a role in this formation and the observed population can be established. Planet population synthesis provides such a link. The approach allows to study how different physical models of individual processes (e.g., proto-planetary disc structure and evolution, planetesimal formation, gas accretion, migration, etc.) affect the overall properties of the population of emerging planets. By necessity, planet population synthesis relies on simplified descriptions of complex processes. These descriptions can be obtained from more detailed specialised simulations of these processes. The objective of this chapter is twofold: 1) provide an overview of the physics entering in the two main approaches to planet population synthesis and 2) present some of the results achieved as well as illustrate how it can be used to extract constraints on the models and to help interpret observations.

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

Context: Several recent studies have found that planet migration in adiabatic discs differs significantly from migration in isothermal discs. Depending on the thermodynamic conditions, i.e., the effectiveness of radiative cooling, and the radial surface density profile, planets migrate inward or outward. Clearly, this will influence the semimajor axis - mass distribution of planets as predicted by population synthesis simulations. Aims: Our goal is to study the global effects of radiative cooling, viscous torque desaturation and gap opening as well as stellar irradiation on the tidal migration of a synthetic planet population. Methods: We combine results from several analytical studies and 3D hydrodynamic simulations in a new semi-analytical migration model for the application in our planet population synthesis calculations. Results: We find a good agreement of our model with torques obtained in a 3D radiative hydrodynamic simulations. We find three convergence zones in a typical disc, towards which planets migrate from the in- and outside, affecting strongly the migration behavior of low-mass planets. Interestingly, this leads to slow type II like migration behavior for low-mass planets captured in those zones even without an ad hoc migration rate reduction factor or a yet to be defined halting mechanism. This means that the new prescription of migration including non-isothermal effects makes the preciously widely used artificial migration rate reduction factor obsolete. Conclusions: Outward migration in parts of a disc makes some planets survive long enough to become massive. The convergence zones lead to a potentially observable accumulations of low-mass planets at certain semimajor axes. Our results indicate that further studies of the mass where the corotation torque saturates will be needed since its value has a major impact on the properties of planet populations.

We computed the abundance of refractory elements in planetary bodies formed in stellar systems with solar chemical composition by combining models for chemical composition and planet formation. We also consider the formation of refractory organic compounds, which have been ignored in previous studies on this topic. We used the commercial software package HSC Chemistry in order to compute the condensation sequence and chemical composition of refractory minerals incorporated into planets. The problem of refractory organic material is approached with two distinct model calculations: the first considers that the fraction of atoms used in the formation of organic compounds is removed from the system (i.e. organic compounds are formed in the gas phase and are nonreactive); and the second assumes that organic compounds are formed by the reaction between different compounds that had previously condensed from the gas phase. Results show that refractory material represents more than 50 wt % of the mass of solids accreted by the simulated planets, with up to 30 wt % of the total mass composed of refractory organic compounds. Carbide and silicate abundances are consistent with C/O and Mg/Si elemental ratios of 0.5 and 1.02 for the Sun. Less than 1 wt % of carbides; pyroxene and olivine in similar quantities are formed. The model predicts planets that are similar in composition to those of the Solar system. It also shows that, starting from a common initial nebula composition, a wide variety of chemically different planets can form, which means that the differences in planetary compositions are due to differences in the planetary formation process. We show that a model in which refractory organic material is absent from the system is more compatible with observations. The use of a planet formation model is essential to form a wide diversity of planets in a consistent way.

The conditions that a planet must fulfill to be habitable are not precisely known. However, it is comparatively easier to define conditions under which a planet is very likely not habitable. Finding such conditions is important as it can help select, in an ensemble of potentially observable planets, which ones should be observed in greater detail for characterization studies. Assuming, as in the Earth, that the presence of a C-cycle is a necessary condition for long-term habitability, we derive, as a function of the planetary mass, a radius above which a planet is likely not habitable. We compute the maximum radius a planet can have to fulfill two constraints: surface conditions compatible with the existence of liquid water, and no ice layer at the bottom of a putative global ocean. We demonstrate that, above a given radius, these two constraints cannot be met. We compute internal structure models of planets, using a five-layer model (core, inner mantle, outer mantle, ocean, and atmosphere), for different masses and composition of the planets (in particular, the Fe/Si ratio of the planet). Our results show that for planets in the Super-Earth mass range (1-12 Mearth), the maximum that a planet, with a composition similar to that of the Earth, can have varies between 1.7 and 2.2 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios and taking radiation into account when computing the gas envelope structure. These results can be used to infer, from radius and mass determinations using high-precision transit observations like those that will soon be performed by the CHaracterizing ExOPlanet Satellite (CHEOPS), which planets are very likely not habitable, and therefore which ones should be considered as best targets for further habitability studies.}

The large number of detected giant exoplanets offers the opportunity to improve our understanding of the formation mechanism, evolution, and interior structure of gas giant planets. The two main models for giant planet formation are core accretion and disk instability. There are substantial differences between these formation models, including formation timescale, favorable formation location, ideal disk properties for planetary formation, early evolution, planetary composition, etc. First, we summarize the two models including their substantial differences, advantages, and disadvantages, and suggest how theoretical models should be connected to available (and future) data. We next summarize current knowledge of the internal structures of solar- and extrasolar- giant planets. Finally, we suggest the next steps to be taken in giant planet exploration.

Building on the experience of the high-resolution community with the suite of VLT high-resolution spectrographs, which has been tremendously successful, we outline here the (science) case for a high-fidelity, high-resolution spectrograph with wide wavelength coverage at the E-ELT. Flagship science drivers include: the study of exo-planetary atmospheres with the prospect of the detection of signatures of life on rocky planets; the chemical composition of planetary debris on the surface of white dwarfs; the spectroscopic study of protoplanetary and proto-stellar disks; the extension of Galactic archaeology to the Local Group and beyond; spectroscopic studies of the evolution of galaxies with samples that, unlike now, are no longer restricted to strongly star forming and/or very massive galaxies; the unraveling of the complex roles of stellar and AGN feedback; the study of the chemical signatures imprinted by population III stars on the IGM during the epoch of reionization; the exciting possibility of paradigm-changing contributions to fundamental physics. The requirements of these science cases can be met by a stable instrument with a spectral resolution of R~100,000 and broad, simultaneous spectral coverage extending from 370nm to 2500nm. Most science cases do not require spatially resolved information, and can be pursued in seeing-limited mode, although some of them would benefit by the E-ELT diffraction limited resolution. Some multiplexing would also be beneficial for some of the science cases. (Abridged)

Planet formation models have been developed during the last years in order to try to reproduce the observations of both the solar system, and the extrasolar planets. Some of these models have partially succeeded, focussing however on massive planets, and for the sake of simplicity excluding planets belonging to planetary systems. However, more and more planets are now found in planetary systems. This tendency, which is a result of both radial velocity, transit and direct imaging surveys, seems to be even more pronounced for low mass planets. These new observations require the improvement of planet formation models, including new physics, and considering the formation of systems. In a recent series of papers, we have presented some improvements in the physics of our models, focussing in particular on the internal structure of forming planets, and on the computation of the excitation state of planetesimals, and their resulting accretion rate. In this paper, we focus on the concurrent effect of the formation of more than one planet in the same protoplanetary disc, and show the effect, in terms of global architecture and composition of this multiplicity. We use a N-body calculation including collision detection to compute the orbital evolution of a planetary system. Moreover, we describe the effect of competition for accretion of gas and solids, as well as the effect of gravitational interactions between planets. We show that the masses and semi-major axis of planets are modified by both the effect of competition and gravitational interactions. We also present the effect of the assumed number of forming planets in the same system (a free parameter of the model), as well as the effect of the inclination and eccentricity damping.

Ground based radial velocity (RV) searches continue to discover exoplanets below Neptune mass down to Earth mass. Furthermore, ground based transit searches now reach milli-mag photometric precision and can discover Neptune size planets around bright stars. These searches will find exoplanets around bright stars anywhere on the sky, their discoveries representing prime science targets for further study due to the proximity and brightness of their host stars. A mission for transit follow-up measurements of these prime targets is currently lacking. The first ESA S-class mission CHEOPS (CHaracterizing ExoPlanet Satellite) will fill this gap. It will perform ultra-high precision photometric monitoring of selected bright target stars almost anywhere on the sky with sufficient precision to detect Earth sized transits. It will be able to detect transits of RV-planets by photometric monitoring if the geometric configuration results in a transit. For Hot Neptunes discovered from the ground, CHEOPS will be able to improve the transit light curve so that the radius can be determined precisely. Because of the host stars' brightness, high precision RV measurements will be possible for all targets. All planets observed in transit by CHEOPS will be validated and their masses will be known. This will provide valuable data for constraining the mass-radius relation of exoplanets, especially in the Neptune-mass regime. During the planned 3.5 year mission, about 500 targets will be observed. There will be 20% of open time available for the community to develop new science programmes.

According to the sequential accretion model, giant planet formation is based first on the formation of a solid core which, when massive enough, can gravitationally bind gas from the nebula to form the envelope. In order to trigger the accretion of gas, the core has to grow up to several Earth masses before the gas component of the protoplanetary disc dissipates. We compute the formation of planets, considering the oligarchic regime for the growth of the solid core. Embryos growing in the disc stir their neighbour planetesimals, exciting their relative velocities, which makes accretion more difficult. We compute the excitation state of planetesimals, as a result of stirring by forming planets, and gas-solid interactions. We find that the formation of giant planets is favoured by the accretion of small planetesimals, as their random velocities are more easily damped by the gas drag of the nebula. Moreover, the capture radius of a protoplanet with a (tiny) envelope is also larger for small planetesimals. However, planets migrate as a result of disc-planet angular momentum exchange, with important consequences for their survival: due to the slow growth of a protoplanet in the oligarchic regime, rapid inward type I migration has important implications on intermediate mass planets that have not started yet their runaway accretion phase of gas. Most of these planets are lost in the central star. Surviving planets have either masses below 10 ME or above several Jupiter masses. To form giant planets before the dissipation of the disc, small planetesimals (~ 0.1 km) have to be the major contributors of the solid accretion process. However, the combination of oligarchic growth and fast inward migration leads to the absence of intermediate mass planets. Other processes must therefore be at work in order to explain the population of extrasolar planets presently known.

The research of exoplanets has entered an era in which we characterize extrasolar planets. This has become possible with measurements of radii and luminosities. Meanwhile, radial velocity surveys discover also very low-mass planets. Uniting all this observational data into one coherent picture to better understand planet formation is an important, but difficult undertaking. Our approach is to develop a model which can make testable predictions for all these observational methods. We continue to describe how we have extended our formation model into a self-consistently coupled formation and evolution model. We show how we calculate the internal structure of the solid core and radiogenic heating. We also improve the protoplanetary disk model. Finally, we conduct population synthesis calculations. We present how the planetary mass-radius relationship of planets with primordial H/He envelopes forms and evolves in time. The basic shape of the M-R relation can be understood from the core accretion model. Low-mass planets cannot bind massive envelopes, while super-critical cores necessarily trigger runway gas accretion, leading to "forbidden" zones in the M-R plane. For a given mass, there is a considerable diversity of radii. We compare the synthetic M-R relation with the observed one, finding good agreement for a>0.1 AU. The synthetic radius distribution is characterized by a strong increase towards small R, and a second, lower local maximum at ~1 Jovian radius. The increase towards small radii reflects the increase of the mass function towards low M. The second local maximum is due to the fact that radii are nearly independent of mass for giant planets. A comparison of the synthetic radius distribution with Kepler data shows agreement for R>2 Earth radii, but divergence for smaller radii. We predict that in the next few years, Kepler should find the second, local maximum at ~1 Jovian radius.

A first characterization of many exoplanets has recently been achieved by the observational determination of their radius. For some planets, a measurement of the luminosity has also been possible, with many more directly imaged planets expected in the future. The statistical characterization of exoplanets through their mass-radius and mass-luminosity diagram is thus becoming possible. This is for planet formation and evolution theory of similar importance as the mass-distance diagram. Our aim in this and a companion paper is to extend our formation model into a coupled formation and evolution model. We want to calculate in a self-consistent way all basic characteristics (M,a,R,L) of a planet and use the model for population synthesis calculations. Here we show how we solve the structure equations describing the gaseous envelope not only during the early formation phase, but also during gas runaway accretion, and during the evolutionary phase at constant mass on Gyr timescales. We then study the in situ formation and evolution of Jupiter, the mass-radius relationship of giants, the influence of the core mass on the radius and the luminosity both in the "hot start" and the "cold start" scenario. We put special emphasis on the comparison with other models. We find that our results agree very well with those of more complex models, despite a number of simplifications. The upgraded model yields the most important characteristics of a planet from its beginning as a seed embryo to a Gyr old planet. This is the case for all planets in a synthetic planetary population. Therefore, we can now use self-consistently the statistical constraints coming from all major observational techniques. This is important in a time where different techniques yield constraints on very diverse sub-populations of planets, and where its is challenging to put all these constraints together in one coherent picture.

Context. This is the fourth paper in a series showing the results of planet population synthesis calculations. Aims. Our goal in this paper is to systematically study the effects of important disk properties, namely disk metallicity, mass and lifetime on fundamental planetary properties. Methods. For a large number of protoplanetary disks we calculate a population of planets with our core accretion formation model including planet migration and disk evolution. Results. We find a large number of correlations: Regarding the planetary initial mass function, metallicity, disk mass and disk lifetime have different roles: For high [Fe/H], giant planets are more frequent. For high disk masses, giant planets are more massive. For long disk lifetimes, giant planets are both more frequent and massive. At low metallicities, very massive giant planets cannot form, but otherwise giant planet mass and metallicity are uncorrelated. In contrast, planet masses and disk gas masses are correlated. The sweet spot for giant planet formation is at 5 AU. In- and outside this distance, higher planetesimals surface densities are necessary. Low metallicities can be compensated by high disk masses, and vice versa, but not ad infinitum. At low metallicities, giant planets only form outside the ice line, while at high metallicities, giant planet formation occurs throughout the disk. The extent of migration increases with disk mass and lifetime and usually decreases with metallicity. No clear correlation of metallicity and the semimajor axis of giant planets exists because in low [Fe/H] disks, planets start further out, but migrate more, whereas for high [Fe/H] they start further in, but migrate less. Close-in low mass planets have a lower mean metallicity than Hot Jupiters. Conclusions. The properties of protoplanetary disks are decisive for the properties of planets, and leave many imprints.

(abridged) A complete census of planetary systems around a volume-limited sample of solar-type stars (FGK dwarfs) in the Solar neighborhood with uniform sensitivity down to Earth-mass planets within their Habitable Zones out to several AUs would be a major milestone in extrasolar planets astrophysics. This fundamental goal can be achieved with a mission concept such as NEAT - the Nearby Earth Astrometric Telescope. NEAT is designed to carry out space-borne extremely-high-precision astrometric measurements sufficient to detect dynamical effects due to orbiting planets of mass even lower than Earth's around the nearest stars. Such a survey mission would provide the actual planetary masses and the full orbital geometry for all the components of the detected planetary systems down to the Earth-mass limit. The NEAT performance limits can be achieved by carrying out differential astrometry between the targets and a set of suitable reference stars in the field. The NEAT instrument design consists of an off-axis parabola single-mirror telescope, a detector with a large field of view made of small movable CCDs located around a fixed central CCD, and an interferometric calibration system originating from metrology fibers located at the primary mirror. The proposed mission architecture relies on the use of two satellites operating at L2 for 5 years, flying in formation and offering a capability of more than 20,000 reconfigurations (alternative option uses deployable boom). The NEAT primary science program will encompass an astrometric survey of our 200 closest F-, G- and K-type stellar neighbors, with an average of 50 visits. The remaining time might be allocated to improve the characterization of the architecture of selected planetary systems around nearby targets of specific interest (low-mass stars, young stars, etc.) discovered by Gaia, ground-based high-precision radial-velocity surveys.

The planetary mass-radius diagram is an observational result of central importance to understand planet formation. We present an updated version of our planet formation model based on the core accretion paradigm which allows to calculate planetary radii and luminosities during the entire formation and evolution of the planets. We first study with it the formation of Jupiter, and compare with previous works. Then we conduct planetary population synthesis calculations to obtain a synthetic mass-radius diagram which we compare with the observed one. Except for bloated Hot Jupiters which can be explained only with additional mechanisms related to their proximity to the star, we find a good agreement of the general shape of the observed and the synthetic mass-radius diagram. This shape can be understood with basic concepts of the core accretion model.

Previous models of the combined growth and migration of protoplanets needed large ad hoc reduction factors for the type I migration rate as found in the isothermal approximation. In order to eliminate these factors, a simple semi-analytical model is presented that incorporates recent results on the migration of low mass planets in non-isothermal disks. It allows for outward migration. The model is used to conduct planetary populations synthesis calculations. Two points with zero torque are found in the disks. Planets migrate both in- and outward towards these convergence zones. They could be important for accelerating planetary growth by concentrating matter in one point. We also find that the updated type I migration models allow the formation of both close-in low mass planets, but also of giant planets at large semimajor axes. The problem of too rapid migration is significantly mitigated.

We extend the models presented in Mordasini et al. (2009) to the formation of planets orbiting stars of different masses. We discuss the properties of the resulting synthetic planet population in terms of mass, orbit, and metallicity distributions. The population synthesis calculations we use are based on the planet formation model developed in Alibert et al. (2005a), which self-consistently takes into account planetary growth and migration in an evolving proto-planetary disk. Using this model, we generate synthetic populations of planets by following their growth in a large number of proto-planetary disks, whose properties (mass and lifetime) are selected in a Monte Carlo fashion using probability distributions derived from observations. We show that the scaling of the proto-planetary disk mass with the mass of the central star has a direct and large influence on the properties of the resulting planet population. In particular, the observed paucity of large mass planets orbiting 0.5 Msun stars can directly be explained as resulting from a only slightly steeper than linear scaling. The observed lack of short period planet orbiting 2.0 Msun stars can also be attributed to this scaling but only if associated with a decrease of the mean disk lifetime for stars more massive than 1.5 Msun. Finally, we show that the distribution of minimum mass and semi-major axis of our synthetic planets are statistically comparable with observations.

We review the current theoretical understanding how growth from micro-meter sized dust to massive giant planets occurs in disks around young stars. After introducing a number of observational constraints from the solar system, from observed protoplanetary disks, and from the extrasolar planets, we simplify the problem by dividing it into a number of discrete stages which are assumed to occur in a sequential way. In the first stage - the growth from dust to kilometer sized planetesimals - the aerodynamics of the bodies are of central importance. We discuss both a purely coagulative growth mode, as well as a gravoturbulent mode involving a gravitational instability of the dust. In the next stage, planetesimals grow to protoplanets of roughly 1000 km in size. Gravity is now the dominant force. The mass accretion can be strongly non-linear, leading to the detachment of a few big bodies from the remaining planetesimals. In the outer planetary system (outside a few AU), some of these bodies can become so massive that they eventually accrete a large gaseous envelope. This is the stage of giant planet formation, as understood within the core accretion-gas capture paradigm. We also discuss the direct gravitational collapse model where giant planets are thought to form directly via a gravitational fragmentation of the gas disk. In the inner system, protoplanets collide in the last stage - probably after the dispersal of the gaseous disk - in giant impacts until the separations between the remaining terrestrial planets become large enough to allow long term stability. We finish the review with some selected questions.

Oxygen (O) and carbon (C) have been inferred recently to be subsolar in abundance from spectra of the atmosphere of the transiting hot Jupiter HD 189733b. Yet, the mass and radius of the planet coupled with structure models indicate a strongly supersolar abundance of heavy elements in the interior of this object. Here we explore the discrepancy between the large amount of heavy elements suspected in the planet's interior and the paucity of volatiles measured in its atmosphere. We describe the formation sequence of the icy planetesimals formed beyond the snow line of the protoplanetary disk and calculate the composition of ices ultimately accreted in the envelope of HD 189733b on its migration pathway. This allows us to reproduce the observed volatile abundances by adjusting the mass of ices vaporized in the envelope. The predicted elemental mixing ratios should be 0.15--0.3 times solar in the envelope of HD 189733b if they are fitted to the recent O and C determinations. However, our fit to the minimum mass of heavy elements predicted by internal structure models gives elemental abundances that are 1.2--2.4 times oversolar in the envelope of HD189733b. We propose that the most likely cause of this discrepancy is irradiation from the central star leading to development of a radiative zone in the planet's outer envelope which would induce gravitational settling of elements. Hence, all strongly irradiated extrasolar planets should present subsolar abundances of volatiles. We finally predict that the abundances of nitrogen (N), sulfur (S) and phosphorus (P) are of $\sim$ $2.8 \times 10^{-5}$, $5.3 \times 10^{-6}$ and $1.8 \times 10^{-7}$ relative to H$_2$, respectively in the atmosphere of HD 189733b.

The hot Neptune orbiting around GJ 436 is a unique example of an intermediate mass planet. Its close-in orbit suggests that the planet has undergone migration and its study is fundamental to understanding planet formation and evolution. As it transits its parent star, it is the only Neptune-mass extrasolar planet of known mass and radius, being slightly larger and more massive than Neptune (M=22.6 M_Earth, R=4.19R_Earth). In this regime, several bulk compositions are possible: from an Earth-like core with a thick hydrogen envelope to a water-rich planet with a thin hydrogen envelope comprising a Neptune-like structure. We combine planet-structure modeling with an advanced planet-formation model to assess the likelihood of the different possible bulk compositions of GJ 436 b. We find that both an envelope-free water planet ("Ocean planet") as well as a diminute version of a gaseous giant planet are excluded. Consisting of a rocky core with a thick hydrogen/helium envelope, a "dry" composition produces not only too small a radius but is also a very unlikely outcome of planet formation around such a low-mass star. We conclude that GJ 436 b is probably of much higher rock content than Neptune (more than 45% in mass), with a small H-He envelope (10 - 20% in mass). This is the expected outcome of the gathering of materials during the migration process in the inner disk, creating a population of which the hot Neptune is representative.

With the high number of extrasolar planets discovered by now, it becomes possible to constrain theoretical formation models in a statistical sense. This paper is the first in a series in which we carry out a large number of planet population synthesis calculations. We begin the series with a paper mainly dedicated to the presentation of our approach, but also the discussion of a representative synthetic planetary population of solar like stars. Based as tightly as possible on observational data, we have derived probability distributions for the most important initial conditions for the planetary formation process. We then draw sets of initial conditions from these distributions and obtain the corresponding synthetic planets with our formation model. Although the main purpose of this paper is the description of our methods, we present some key results: We find that the variation of the initial conditions in the limits occurring in nature leads to the formation of planets of large diversity. This formation process is best visualized in planetary formation tracks, where different phases of concurrent growth and migration can be identified. These phases lead to the emergence of sub-populations of planets distinguishable in a mass-semimajor axis diagram. The most important ones are the "failed cores", a vast group of core-dominated low mass planets, the "horizontal branch", a sub-population of Neptune mass planets extending out to 6 AU, and the "main clump", a concentration of giant gaseous giants planets at around 0.3-2 AU.

This is the second paper in a series of papers showing the results of extrasolar planet population synthesis calculations. In the companion paper (Paper I), we have presented in detail our methods. By applying an observational detection bias for radial velocity surveys, we identify the potentially detectable synthetic planets. The properties of these planets are compared in quantitative statistical tests with the properties of a carefully selected sub-population of actual exoplanets. We use a two dimensional Kolmogorov-Smirnov test to compare the mass-distance distributions of synthetic and observed planets, as well as 1D KS tests to compare the mass, the semimajor axis and the [Fe/H] distributions. We find that some models can account to a reasonable degree of significance for the observed properties. We concurrently account for many other observed features, e.g. the "metallicity effect". This gives us confidence that our model captures several essential features of giant planet formation. Our simulations allow us also to extract the properties of the underlying exoplanet population that are not yet detectable. For example, we have derived the planetary initial mass function (PIMF) and have been led to conclude that the planets detected so far represent only the tip of the iceberg. The PIMF can also be used to predict how the detectable extrasolar planet population will change as the precision of radial velocity surveys improves to an extreme precision of 0.1 m/s.

We calculate the minimum mass of heavy elements required in the envelopes of Jupiter and Saturn to match the observed oversolar abundances of volatiles. Because the clathration efficiency remains unknown in the solar nebula, we have considered a set of sequences of ice formation in which the fraction of water available for clathration is varied between 0 and 100 %. In all the cases considered, we assume that the water abundance remains homogeneous whatever the heliocentric distance in the nebula and directly derives from a gas phase of solar composition. Planetesimals then form in the feeding zones of Jupiter and Saturn from the agglomeration of clathrates and pure condensates in proportions fixed by the clathration efficiency. A fraction of Kr and Xe may have been sequestrated by the H3+ ion in the form of stable XeH3+ and KrH3+ complexes in the solar nebula gas phase, thus implying the formation of at least partly Xe- and Kr-impoverished planetesimals in the feeding zones of Jupiter and Saturn. These planetesimals were subsequently accreted and vaporized into the hydrogen envelopes of Jupiter and Saturn, thus engendering volatiles enrichments in their atmospheres, with respect to hydrogen. Taking into account both refractory and volatile components, and assuming plausible molecular mixing ratios in the gas phase of the outer solar nebula, we show that it is possible to match the observed enrichments in Jupiter and Saturn, whatever the clathration efficiency. Our calculations predict that the O/H enrichment decreases from 6.7 to 5.6 times solar (O/H) in the envelope of Jupiter and from 18.1 to 15.4 times solar (O/H) in the envelope of Saturn with the growing clathration efficiency in the solar nebula.

We describe a scenario of Titan's formation matching the constraints imposed by its current atmospheric composition. Assuming that the abundances of all elements, including oxygen, are solar in the outer nebula, we show that the icy planetesimals were agglomerated in the feeding zone of Saturn from a mixture of clathrates with multiple guest species, so-called stochiometric hydrates such as ammonia hydrate, and pure condensates. We also use a statistical thermodynamic approach to constrain the composition of multiple guest clathrates formed in the solar nebula. We then infer that krypton and xenon, that are expected to condense in the 20-30 K temperature range in the solar nebula, are trapped in clathrates at higher temperatures than 50 K. Once formed, these ices either were accreted by Saturn or remained embedded in its surrounding subnebula until they found their way into the regular satellites growing around Saturn. In order to explain the carbon monoxide and primordial argon deficiencies of Titan's atmosphere, we suggest that the satellite was formed from icy planetesimals initially produced in the solar nebula and that were partially devolatilized at a temperature not exceeding 50 K during their migration within Saturn's subnebula. The observed deficiencies of Titan's atmosphere in krypton and xenon could result from other processes that may have occurred both prior or after the completion of Titan. Thus, krypton and xenon may have been sequestrated in the form of XH3+ complexes in the solar nebula gas phase, causing the formation of noble gas-poor planetesimals ultimately accreted by Titan. Alternatively, krypton and xenon may have also been trapped efficiently in clathrates located on the satellite's surface or in its atmospheric haze.

We consider the role of deuterium as a potential marker of location and ambient conditions during the formation of small bodies in our Solar system. We concentrate in particular on the formation of the regular icy satellites of Jupiter and the other giant planets, but include a discussion of the implications for the Trojan asteroids and the irregular satellites. We examine in detail the formation of regular planetary satellites within the paradigm of a circum-Jovian subnebula. Particular attention is paid to the two extreme potential subnebulae - "hot" and "cold". In particular, we show that, for the case of the "hot" subnebula model, the D:H ratio in water ice measured from the regular satellites would be expected to be near-Solar. In contrast, satellites which formed in a "cold" subnebula would be expected to display a D:H ratio that is distinctly over-Solar. We then compare the results obtained with the enrichment regimes which could be expected for other families of icy small bodies in the outer Solar system - the Trojan asteroids and the irregular satellites. In doing so, we demonstrate how measurements by Laplace, the James Webb Space Telescope, HERSCHEL and ALMA will play an important role in determining the true formation locations and mechanisms of these objects.

We study the formation conditions of icy planetesimals in protoplanetary disks in order to determine the composition of ices in small and cold extrasolar planets. Assuming that ices are formed from hydrates, clathrates, and pure condensates, we calculate their mass fractions with respect to the total quantity of ices included in planetesimals, for a grid of disk models. We find that the composition of ices weakly depends on the adopted disk thermodynamic conditions, and is rather influenced by the initial composition of the gas phase. The use of a plausible range of molecular abundance ratios and the variation of the relative elemental carbon over oxygen ratio in the gas phase of protoplanetary disks, allow us to apply our model to a wide range of planetary systems. Our results can thus be used to constrain the icy/volatile phase composition of cold planets evidenced by microlensing surveys, hypothetical ocean-planets and carbon planets, which could be detected by Corot or Kepler.

We present a review of the standard paradigm for giant planet formation, the core accretion theory. After an overview of the basic concepts of this model, results of the original implementation are discussed. Then, recent improvements and extensions, like the inclusion of planetary migration and the resulting effects are discussed. It is shown that these improvement solve the timescale problem. Finally, it is shown that by means of generating synthetic populations of (extrasolar) planets, core accretion models are able to reproduce in a statistically significant way the actually observed planetary population.

We propose a scenario for the formation of the Main Belt in which asteroids incorporated icy particles formed in the outer Solar Nebula. We calculate the composition of icy planetesimals formed beyond a heliocentric distance of 5 AU in the nebula by assuming that the abundances of all elements, in particular that of oxygen, are solar. As a result, we show that ices formed in the outer Solar Nebula are composed of a mix of clathrate hydrates, hydrates formed above 50 K and pure condensates produced at lower temperatures. We then consider the inward migration of solids initially produced in the outer Solar Nebula and show that a significant fraction may have drifted to the current position of the Main Belt without encountering temperature and pressure conditions high enough to vaporize the ices they contain. We propose that, through the detection and identification of initially buried ices revealed by recent impacts on the surfaces of asteroids, it could be possible to infer the thermodynamic conditions that were present within the Solar Nebula during the accretion of these bodies, and during the inward migration of icy planetesimals. We also investigate the potential influence that the incorporation of ices in asteroids may have on their porosities and densities. In particular, we show how the presence of ices reduces the value of the bulk density of a given body, and consequently modifies its macro-porosity from that which would be expected from a given taxonomic type.

Over the past two years, the search for low-mass extrasolar planets has led to the detection of seven so-called 'hot Neptunes' or 'super-Earths' around Sun-like stars. These planets have masses 5-20 times larger than the Earth and are mainly found on close-in orbits with periods of 2-15 days. Here we report a system of three Neptune-mass planets with periods of 8.67, 31.6 and 197 days, orbiting the nearby star HD 69830. This star was already known to show an infrared excess possibly caused by an asteroid belt within 1 AU (the Sun-Earth distance). Simulations show that the system is in a dynamically stable configuration. Theoretical calculations favour a mainly rocky composition for both inner planets, while the outer planet probably has a significant gaseous envelope surrounding its rocky/icy core; the outer planet orbits within the habitable zone of this star.

Protoplanetary disks start their lives with a dust free inner region where the temperatures are higher than the sublimation temperature of solids. As the star illuminates the innermost particles, which are immersed in gas at the sublimation edge, these particles are subject to a photophoretic force. We examine the motion of dust particles at the inner edge of protoplanetary disks due to photophoretic drag. We find that, in a laminar disk, photophoretic drag increases the size of the inner hole after accretion onto the central body has become subdued. This region within the hole becomes an optically transparent zone containing gas and large dusty particles (>>10 cm), but devoid of, or strongly depleted in, smaller dust aggregates. Photophoresis can clear the inner disk of dust out to 10 AU in less than 1 Myr. At late times, the edge reaches a stable equilibrium between inward drift and photophoretic outward drift, at a distance of some tens of AU. Eventually, the edge will move inwards again as the disk disperses, shifting the equilibrium position back from about 40 AU to below 30 AU in 1-2 Myr in the disk model. In a turbulent disk, diffusion can delay the clearing of a disk by photophoresis. Smaller and/or age-independent holes of radii of a few AU are also possible outcomes of turbulent diffusion counteracting photophoresis. This outward and then inward moving edge marks a region of high dust concentration. This density enhancement, and the efficient transport of particles from close to the star to large distances away, can explain features of comets such as high measured ratios of crystalline to amorphous silicates, and has a large number of other applications.

Since the discovery of the first giant planet outside the solar system in 1995 (Mayor & Queloz 1995), more than 180 extrasolar planets have been discovered. With improving detection capabilities, a new class of planets with masses 5-20 times larger than the Earth, at close distance from their parent star is rapidly emerging. Recently, the first system of three Neptune-mass planets has been discovered around the solar type star HD69830 (Lovis et al. 2006). Here, we present and discuss a possible formation scenario for this planetary system based on a consistent coupling between the extended core accretion model and evolutionary models (Alibert et al. 2005a, Baraffe et al. 2004,2006). We show that the innermost planet formed from an embryo having started inside the iceline is composed essentially of a rocky core surrounded by a tiny gaseous envelope. The two outermost planets started their formation beyond the iceline and, as a consequence, accrete a substantial amount of water ice during their formation. We calculate the present day thermodynamical conditions inside these two latter planets and show that they are made of a rocky core surrounded by a shell of fluid water and a gaseous envelope.

We review recent theoretical progress aimed at understanding the formation and the early stages of evolution of giant planets, low-mass stars and brown dwarfs. Calculations coupling giant planet formation, within a modern version of the core accretion model, and subsequent evolution yield consistent determinations of the planet structure and evolution. Because of the uncertainties in the initial conditions, however, it is not possible to say whether young planets are faint or bright compared with low-mass young brown dwarfs. We review the effects of irradiation and evaporation on the evolution of short period planets and argue that substantial mass loss may have occurred for these objects. Concerning star formation, geometrical effects in protostar core collapse are examined by comparing 1D and 3D calculations. Spherical collapse is shown to overestimate the core inner density and temperature and thus to yield incorrect initial conditions for PMS or young brown dwarf evolution. Accretion is also shown to occur over a very limited fraction of the protostar surface. Accretion affects the evolution of young brown dwarfs and yields more compact structures for a given mass and age, thus fainter luminosities. This can lead to severe misinterpretations of the mass and/or age of young accreting objects from their location in the HR diagram. We argue that newborn stars and brown dwarfs should appear rapidly over an extended area in the HR diagram, depending on their accretion history, rather than on a well defined birth line. Finally, we suggest that the distinction between planets and brown dwarfs be based on an observational diagnostic, reflecting the different formation mechanisms between these two distinct populations, rather than on an arbitrary, confusing definition.

This paper presents a consistent description of the formation and the subsequent evolution of gaseous planets, with special attention to short-period, low-mass hot-Neptune planets characteristic of $\mu$ Ara-like systems. We show that core accretion including migration and disk evolution and subsequent evolution taking into account irradiation and evaporation provide a viable formation mechanism for this type of strongly irradiated light planets. At an orbital distance $a \simeq$ 0.1 AU, this revised core accretion model leads to the formation of planets with total masses ranging from $\sim$ 14 $\mearth$ (0.044 $\mjup$) to $\sim$ 400 $\mearth$ (1.25 $\mjup$). The newly born planets have a dense core of $\sim$ 6 $\mearth$, independent of the total mass, and heavy element enrichments in the envelope, $M_{\rm Z,env}/M_{\rm env} $, varying from 10% to 80% from the largest to the smallest planets. We examine the dependence of the evolution of the born planet on the evaporation rate due to the incident XUV stellar flux. In order to reach a $\mu$ Ara-like mass ($\sim$ 14 $\mearth$) after $\sim $ 1 Gyr, the initial planet mass must range from 166 $\mearth$ ($\sim$ 0.52 $\mjup$) to about 20 $\mearth$, for evaporation rates varying by 2 orders of magnitude, corresponding to 90% to 20% mass loss during evolution. The presence of a core and heavy elements in the envelope affects appreciably the structure and the evolution of the planet and yields $\sim 8%-9%$ difference in radius compared to coreless objects of solar composition for Saturn-mass planets. These combinations of evaporation rates and internal compositions translate into different detection probabilities, and thus different statistical distributions for hot-Neptunes and hot-Jupiters.

We use the clathrate hydrate trapping theory to calculate the enrichments in O, N, S, Xe, Ar and Kr compared to solar in Saturn's atmosphere. For this, we calibrate our calculations using two different carbon abundance determinations that cover the domain of measurements published in the last decades: one derived from the NASA $Kuiper$ Airborne Observatory measurements and the other obtained from the Cassini spacecraft observations. We show that these two different carbon abundances imply quite a different minimum heavy element content for Saturn. Using the Kuiper Airborne Observatory measurement for calibration, the amount of ices accreted by Saturn is found to be consistent with current interior models of this planet. On the other hand, using the Cassini measurement for calibration leads to an ice content in the planet's envelope which is higher than the one derived from the interior models. In this latter case, reconciling the interior models with the amount of C measured by the Cassini spacecraft requires that significant differential sedimentation of water and volatile species have taken place in Saturn's interior during its lifetime.

We use the evolutionary turbulent model of Jupiter's subnebula described by Alibert et al. (2005a) to constrain the composition of ices incorporated in its regular icy satellites. We consider CO2, CO, CH4, N2, NH3, H2S, Ar, Kr, and Xe as the major volatile species existing in the gas-phase of the solar nebula. All these volatile species, except CO2 which crystallized as a pure condensate, are assumed to be trapped by H2O to form hydrates or clathrate hydrates in the solar nebula. Once condensed, these ices were incorporated into the growing planetesimals produced in the feeding zone of proto-Jupiter. Some of these solids then flowed from the solar nebula to the subnebula, and may have been accreted by the forming Jovian regular satellites. We show that ices embedded in solids entering at early epochs into the Jovian subdisk were all vaporized. This leads us to consider two different scenarios of regular icy satellites formation in order to estimate the composition of the ices they contain. In the first scenario, icy satellites were accreted from planetesimals that have been produced in Jupiter's feeding zone without further vaporization, whereas, in the second scenario, icy satellites were accreted from planetesimals produced in the Jovian subnebula. In this latter case, we study the evolution of carbon and nitrogen gas-phase chemistries in the Jovian subnebula and we show that the conversions of N2 to NH3, of CO to CO2, and of CO to CH4 were all inhibited in the major part of the subdisk. Finally, we assess the mass abundances of the major volatile species with respect to H2O in the interiors of the Jovian regular icy satellites. Our results are then compatible with the detection of CO2 on the surfaces of Callisto and Ganymede and with the presence of NH3 envisaged in subsurface oceans within Ganymede and Callisto.

Source blending in microlensing experiments is known to modify the Einstein time of the observed events. In this paper, we have conducted Monte-Carlo calculations, using the analytical relationships derived by Han (1999) to quantify the effect of blending on the observed event time distribution and optical depth. We show that short-time events are affected significantly by source blending and that, for moderately blended sources, the optical depth $\tau$ is globally overestimated, because of an underestimation of the exposure. For high blending situations, on the opposite, blending leads to an {\it under}estimation of the optical depth. Our results are in agreement with the most recent optical depth determinations toward the Galactic Center of the MACHO collaboration (Popowski et al. 2004) and the OGLE-II collaboration (Sumi et al. 2005) that use clump giants (less affected by the blending effect) as sources. The blending-corrected, lower optical depth toward the Galactic Bulge is now in good agreement with the value inferred from galactic models, reconciling theoretical and observational determinations.

We have developed an evolutionary turbulent model of the Jovian subnebula consistent with the extended core accretion formation models of Jupiter described by Alibert et al. (2005b) and derived from Alibert et al. (2004,2005a). This model takes into account the vertical structure of the subnebula, as well as the evolution of the surface density as given by an $\alpha$-disk model and is used to calculate the thermodynamical conditions in the subdisk, for different values of the viscosity parameter. We show that the Jovian subnebula evolves in two different phases during its lifetime. In the first phase, the subnebula is fed through its outer edge by the solar nebula as long as it has not been dissipated. In the second phase, the solar nebula has disappeared and the Jovian subdisk expands and gradually clears with time as Jupiter accretes the remaining material. We also demonstrate that early generations of satellites formed during the beginning of the first phase of the subnebula cannot survive in this environment and fall onto the proto-Jupiter. As a result, these bodies may contribute to the enrichment of Jupiter in heavy elements. Moreover, migration calculations in the Jovian subnebula allow us to follow the evolution of the ices/rocks ratios in the proto-satellites as a function of their migration pathways. By a tempting to reproduce the distance distribution of the Galilean satellites, as well as their ices/rocks ratios, we obtain some constraints on the viscosity parameter of the Jovian subnebula.

The wealth of observational data about Jupiter and Saturn provides strong constraints to guide our understanding of the formation of giant planets. The size of the core and the total amount of heavy elements in the envelope have been derived from internal structure studies by Saumon & Guillot (2004). The atmospheric abundance of some volatile elements has been measured {\it in situ} by the {\it Galileo} probe (Mahaffy et al. 2000, Wong et al. 2004) or by remote sensing (Briggs & Sackett 1989, Kerola et al. 1997). In this Letter, we show that, by extending the standard core accretion formation scenario of giant planets by Pollack et al. (1996) to include migration and protoplanetary disk evolution, it is possible to account for all of these constraints in a self-consistent manner.

Using the clathrate hydrates trapping theory, we discuss the enrichments in volatiles in the atmosphere of Jupiter measured by the \textit{Galileo} probe in the framework of new extended core-accretion planet formation models including migration and disk evolution. We construct a self-consistent model in which the volatile content of planetesimals accreted during the formation of Jupiter is calculated from the thermodynamical evolution of the disk. Assuming CO2:CO:CH4 = 30:10:1 (ratios compatible with ISM measurements), we show that we can explain the enrichments in volatiles in a way compatible with the recent constraints set from internal structure modeling on the total amount of heavy elements present in the planet.

We use the clathrate hydrate trapping theory (Lunine & Stevenson 1985) and the gas drag formalism of Weidenschilling (1977) to calculate the composition of ices incorporated in the interior of Ceres. In the spirit of the work of Cyr et al. (1998), and using a time dependent solar nebula model, we show that icy solids can drift from beyond 5 AU to the present location of the asteroid and be preserved from vaporization. We argue that volatiles were trapped in the outer solar nebula under the forms of clathrate hydrates, hydrates and pure condensates prior to having been incorporated in icy solids and subsequently in Ceres. Under the assumption that most of volatiles were not vaporized during the accretion phase and the thermal evolution of Ceres, we determine the per mass abundances with respect to H2O of CO2, CO, CH4, N2, NH3, Ar, Xe, and Kr in the interior of the asteroid. The Dawn space mission, scheduled to explore Ceres in August 2014 (Russel et al. 2004), may have the capacity to test some predictions. We also show that an in situ measurement of the D/H ratio in H2O in Ceres could constrain the distance range in the solar nebula where its icy planetesimals were produced.

We present a new model of giant planet formation that extends the core-accretion model of Pollack etal (1996) to include migration, disc evolution and gap formation. We show that taking into account these effects can lead to a much more rapid formation of giant planets, making it compatible with the typical disc lifetimes inferred from observations of young circumstellar discs. This speed up is due to the fact that migration prevents the severe depletion of the feeding zone as observed in in situ calculations. Hence, the growing planet is never isolated and it can reach cross-over mass on a much shorter timescale. To illustrate the range of planets that can form in our model, we describe a set of simulations in which we have varied some of the initial parameters and compare the final masses and semi-major axes with those inferred from observed extra-solar planets.

We extend the core-accretion model of giant gaseous planets by Pollack et al. (\cite{P96}) to include migration, disc evolution and gap formation. Starting with a core of a fraction of an Earth's mass located at 8 AU, we end our simulation with the onset of runaway gas accretion when the planet is at 5.5 AU 1 Myr later. This timescale is about a factor ten shorter than the one found by Pollack et al. (\cite{P96}) even though the disc was less massive initially and viscously evolving. Other initial conditions can lead to even shorter timescales. The reason for this speed-up is found to result from the fact that a moving planet does not deplete its feeding zone to the extend of a static planet. Thus, the uncomfortably long formation timescale associated with the core-accretion scenario can be considerably reduced and brought in much better agreement with the typical disc lifetimes inferred from observations of young circumstellar discs.

We present theoretical period - magnitude relationships for Cepheids in different filters for fundamental and first overtone pulsators, completing the work by Alibert et al. (1999). The results are provided for different metallicities characteristic of the Magellanic Clouds and the Milky Way. In contrast to the fundamental mode, we find a small metallicity effect on the period - luminosity relationship for the first overtone, due to the sensitivity of the period ratio $P_1$/$P_0$ with metallicity. Comparison is made with observations from OGLE and EROS in the Small and Large Magellanic Clouds. We emphasize the constraint on theoretical predictions provided by the combination of both fundamental and first overtone observed sequences. We obtain excellent agreement between models and data in a $\log P$ - $\wi$ (Wesenheit index) diagram for a distance modulus for the LMC $\mu_0$ = 18.60 - 18.70. We analyse the uncertainties of the fundamental period - magnitude relationships and the consequences on distance determination. We show that an arbitrary shift of the instability strip by 350 K in $\te$ yields up to 0.45 mag effect on $\mv$ at a given period, whereas the effect is less than 0.1 mag in the $K$-band. Using recent near-IR observations in the Large Magellanic Cloud and our $P$ - $\mk$ relationship, we derive a distance modulus for the LMC in agreement with the value based on $\wi$ data.

Based on consistent evolutionary and pulsation calculations, we analyse the effect of metallicity and of different convection treatments in the stellar models on period - magnitude, - color and - radius relationships. In order to perform an accurate comparison with observations, we have computed grids of atmosphere models and synthetic spectra for different metallicities, covering the range of effective temperatures and gravities relevant for Cepheids. The models are compared to recent observations of galactic and Magellanic Clouds Cepheids. Unprecedented level of agreement is found between models and observations. We show that within the range of metallicity for the Galaxy and the Magellanic Clouds, a change of slope in the period - luminosity (PL) relationship is predicted at low periods, due to the reduction of the blue loop during core He burning. The minimum mass undergoing a blue loop and consequently the critical period at which this change of slope occurs depend on the metallicity Z and on the convection treatment in the stellar models. However, besides this change of slope, we do not find any significant effect of metallicity on period - magnitude relationships from V to K bands, and on period - color relationships in IR colors. We only find a detectable effect of $Z$ on $(B-V)$ colors. These results are not affected by uncertainties inherent to current stellar models, mainly due to convection treatment.

We have computed stellar evolutionary models for stars in a mass range characteristic of Cepheid variables ($3<m/\Msol<12$) for different metallicities representative of the Galaxy and the Magellanic Clouds populations. The stellar evolution calculations are coupled to a linear non adiabatic stability analysis to get self-consistent mass-period-luminosity relations. The period - luminosity relation as a function of metallicity is analysed and compared to the recent EROS observations in the Magellanic Clouds. The models reproduce the observed width of the instability strips for the SMC and LMC. We determine a statistical P-L relationship, taking into account the evolutionary timescales and a mass distribution given by a Salpeter mass function. Excellent agreement is found with the SMC PL relationship determined by Sasselov et al. (1997). The models reproduce the change of slope in the P-L relationship near $P\sim 2.5$ days discovered recently by the EROS collaboration (Bauer 1997; Bauer et al. 1998) and thus explain this feature in term of stellar evolution. Some discrepancy, however, remains for the LMC Cepheids. The models are also in good agreement with Beat Cepheids observed by the MACHO and EROS collaborations. We show that most of the 1H/2H Beat Cepheids have not yet ignited central helium burning; they are just evolving off the Main Sequence toward the red giant branch.