sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Ali, K.

Normalized to: Ali, K.

6 article(s) in total. 22 co-authors, from 1 to 4 common article(s). Median position in authors list is 2,5.

[1]  oai:arXiv.org:1805.10178  [pdf] - 1896926
Probing redshift-space distortions with phase correlations
Comments: 17 pages, 8 figures
Submitted: 2018-05-25, last modified: 2019-06-10
Redshift-space distortions are a sensitive probe of the growth of large-scale structure. In the linear regime, redshift-space distortions are fully described by the multipoles of the two-point correlation function. In the nonlinear regime, however, higher-order statistics are needed to capture the full information of the galaxy density field. In this paper, we show that the redshift-space line correlation function--which is a measure of Fourier phase correlations--is sensitive to the nonlinear growth of the density and velocity fields and to the nonlinear mapping between real and redshift space. We expand the line correlation function in multipoles, and we show that almost all of the information is encoded in the monopole, quadrupole, and hexadecapole. We argue that these multipoles are highly complementary to the multipoles of the two-point correlation function: first, because they are directly sensitive to the difference between the density and the velocity coupling kernels, which is a purely nonlinear quantity; and second, because the multipoles are proportional to different combinations of $f$ and $\sigma_8$. Measured in conjunction with the two-point correlation function and the bispectrum, the multipoles of the line correlation function could therefore allow us to disentangle efficiently these two quantities and to test modified theories of gravity.
[2]  oai:arXiv.org:1902.11034  [pdf] - 1864009
Size-scaling of clump instabilities in turbulent, feedback regulated disks
Comments: Accepted by ApJ, no changes made. 11 pages, 4 figures
Submitted: 2019-02-28
We explore the scaling between the size of star-forming clumps and rotational support in massively star-forming galactic disks. The analysis relies on simulations of a clumpy galaxy at $z=2$ and the observed DYNAMO sample of rare clumpy analogs at $z\approx0.1$ to test a predictive clump size scaling proposed by \citet{Fisher2017ApJ...839L...5F} in the context of the Violent Disk Instability (VDI) theory. We here determine the clump sizes using a recently presented 2-point estimator, which is robust against resolution/noise effects, hierarchical clump substructure, clump-clump overlap and other galactic substructure. After verifying Fisher's clump scaling relation for the DYNAMO observations, we explore whether this relation remains characteristic of the VDI theory, even if realistic physical processes, such as local asymetries and stellar feedback, are included in the model. To this end, we rely on hydrodynamic zoom-simulations of a Milky Way-mass galaxy with four different feedback prescriptions. We find that, during its marginally stable epoch at $z=2$, this mock galaxy falls on the clump scaling relation, although its position on this relation depends on the feedback model. This finding implies that Toomre-like stability considerations approximately apply to large ($\sim\rm kpc$) instabilities in marginally stable turbulent disks, irrespective of the feedback model, but also emphasizes that the global clump distribution of a turbulent disk depends strongly on feedback.
[3]  oai:arXiv.org:1806.10276  [pdf] - 1713045
Cosmological Constraints from Fourier Phase Statistics
Comments: Accepted for Publication in MNRAS. 12 pages, 7 figures
Submitted: 2018-06-26
Most statistical inference from cosmic large-scale structure relies on two-point statistics, i.e.\ on the galaxy-galaxy correlation function (2PCF) or the power spectrum. These statistics capture the full information encoded in the Fourier amplitudes of the galaxy density field but do not describe the Fourier phases of the field. Here, we quantify the information contained in the line correlation function (LCF), a three-point Fourier phase correlation function. Using cosmological simulations, we estimate the Fisher information (at redshift $z=0$) of the 2PCF, LCF and their combination, regarding the cosmological parameters of the standard $\Lambda$CDM model, as well as a Warm Dark Matter (WDM) model and the $f(R)$ and Symmetron modified gravity models. The galaxy bias is accounted for at the level of a linear bias. The relative information of the 2PCF and the LCF depends on the survey volume, sampling density (shot noise) and the bias uncertainty. For a volume of $1h^{-3}\rm Gpc^3$, sampled with points of mean density $\bar{n} = 2\times10^{-3} h^{3}\ \rm Mpc^{-3}$ and a bias uncertainty of 13\%, the LCF improves the parameter constraints by about 20\% in the $\Lambda$CDM cosmology and potentially even more in alternative models. Finally, since a linear bias only affects the Fourier amplitudes (2PCF), but not the phases (LCF), the combination of the 2PCF and the LCF can be used to break the degeneracy between the linear bias and $\sigma_8$, present in 2-point statistics.
[4]  oai:arXiv.org:1801.02776  [pdf] - 1615038
Robust Cross-correlation-based Measurement of Clump Sizes in Galaxies
Comments: Published in ApJ on 2017 August 9. 13 pages, 8 figures
Submitted: 2018-01-08
Stars form in molecular complexes that are visible as giant clouds ($\sim 10^{5-6} \mathrm{M}_\odot$) in nearby galaxies and as giant clumps ($\sim 10^{8-9}\mathrm{M}_\odot$) in galaxies at redshifts $z\approx1$$-$$3$. Theoretical inferences on the origin and evolution of these complexes often require robust measurements of their characteristic size, which is hard to measure at limited resolution and often ill-defined due to overlap and quasi-fractal substructure. We show that maximum and luminosity-weighted sizes of clumps seen in star formation maps (e.g.\ H$\alpha$) can be recovered statistically using the two-point correlation function (2PCF), if an approximate stellar surface density map is taken as the normalizing random field. After clarifying the link between Gaussian clumps and the 2PCF analytically, we design a method for measuring the diameters of Gaussian clumps with realistic quasi-fractal substructure. This method is tested using mock images of clumpy disk galaxies at different spatial resolutions and perturbed by Gaussian white noise. We find that the 2PCF can recover the input clump scale at $\sim20\%$ accuracy, as long as this scale is larger than the spatial resolution. We apply this method to the local spiral galaxy NGC 5194, as well as to three clumpy turbulent galaxies from the DYNAMO-HST sample. In both cases, our statistical H$\alpha$-clump size measurements agree with previous measurements and with the estimated Jeans lengths. However, the new measurements are free from subjective choices when fitting individual clumps.
[5]  oai:arXiv.org:1703.06656  [pdf] - 1571056
A precise deuterium abundance: Re-measurement of the z=3.572 absorption system towards the quasar PKS1937-101
Comments: 13 pages, 5 figures, 6 tables, accepted by MNRAS
Submitted: 2017-03-20
The primordial deuterium abundance probes fundamental physics during the Big Bang Nucleosynthesis and can be used to infer cosmological parameters. Observationally, the abundance can be measured using absorbing clouds along the lines of sight to distant quasars. Observations of the quasar PKS1937--101 contain two absorbers for which the deuterium abundance has previously been determined. Here we focus on the higher redshift one at $z_{abs} = 3.572$. We present new observations with significantly increased signal-to-noise ratio which enable a far more precise and robust measurement of the deuterium to hydrogen column density ratio, resulting in D/H = $2.62\pm0.05\times10^{-5}$. This particular measurement is of interest because it is among the most precise assessments to date and it has been derived from the second lowest column-density absorber [N(HI) $=17.9\mathrm{cm}^{-2}$] that has so-far been utilised for deuterium abundance measurements. The majority of existing high-precision measurements were obtained from considerably higher column density systems [i.e. N(HI) $>19.4\mathrm{cm}^{-2}$]. This bodes well for future observations as low column density systems are more common.
[6]  oai:arXiv.org:1412.4043  [pdf] - 1223626
A robust deuterium abundance; Re-measurement of the z=3.256 absorption system towards the quasar PKS1937-1009
Comments: 13 pages, 5 figures, matches version accepted by MNRAS
Submitted: 2014-12-12
The primordial deuterium abundance is an important tracer of the fundamental physics taking place during Big Bang Nucleosynthesis. It can be determined from absorption features along the line of sight to distant quasars. The quasar PKS1937-1009 contains two absorptions systems that have been used to measure the primordial deuterium abundance, the lower redshift one being at z_abs = 3.256. New observations of this absorber are of a substantially higher signal-to-noise and thus permit a significantly more robust estimate of the primordial deuterium abundance, leading to a D/H ratio of 2.45+/-0.28 x10^-5. Whilst the precision of the new measurement presented here is below that obtained from the recent cosmological parameter measurements by Planck, our analysis illustrates how a statistical sample obtained using similarly high spectral signal-to-noise can make deuterium a competitive and complementary cosmological parameter estimator and provide an explanation for the scatter seen between some existing deuterium measurements.