Among the four known transneptunian dwarf planets, Haumea is an exotic, very elongated, and fast rotating body. In contrast to the other dwarf planets, its size, shape, albedo, and density are not well constrained. Here we report results of a multi-chord stellar occultation, observed on 2017 January 21. Secondary events observed around the main body are consistent with the presence of a ring of opacity 0.5, width 70 km, and radius 2,287$_{-45}^{+75}$ km. The Centaur Chariklo was the first body other than a giant planet to show a ring system and the Centaur Chiron was later found to possess something similar to Chariklo's rings. Haumea is the first body outside the Centaur population with a ring. The ring is coplanar with both Haumea's equator and the orbit of its satellite Hi'iaka. Its radius places close to the 3:1 mean motion resonance with Haumea's spin period. The occultation by the main body provides an instantaneous elliptical limb with axes 1,704 $\pm$ 4 km x 1,138 $\pm$ 26 km. Combined with rotational light-curves, it constrains Haumea's 3D orientation and its triaxial shape, which is inconsistent with a homogeneous body in hydrostatic equilibrium. Haumea's largest axis is at least 2,322 $\pm$ 60 km, larger than thought before. This implies an upper limit of 1,885 $\pm$ 80 kg m$^{-3}$ for Haumea's density, smaller and less puzzling than previous estimations, and a geometric albedo of 0.51 $\pm$ 0.02, also smaller than previous estimations. No global N$_2$ or CH$_4$ atmosphere with pressures larger than 15 and 50 nbar (3-$\sigma$ limits), respectively, is detected.

On 28th January 2018, the large Trans-Neptunian Object (TNO) 2002TC302 occulted a m$_v= $15.3 star with ID 130957813463146112 in the Gaia DR2 stellar catalog. 12 positive occultation chords were obtained from Italy, France, Slovenia and Switzerland. Also, 4 negative detections were obtained near the north and south limbs. This represents the best observed stellar occultation by a TNO other than Pluto, in terms of the number of chords published thus far. From the 12 chords, an accurate elliptical fit to the instantaneous projection of the body, compatible with the near misses, can be obtained. The resulting ellipse has major and minor axes of 543 $\pm$ 18 km and 460 $\pm$ 11 km, respectively, with a position angle of 3 $\pm$ 1 degrees for the minor axis. This information, combined with rotational light curves obtained with the 1.5m telescope at Sierra Nevada Observatory and the 1.23m telescope at Calar Alto observatory, allows us to derive possible 3D shapes and density estimations for the body, based on hydrostatic equilibrium assumptions. The effective area equivalent diameter is $\sim$ 84 km smaller than the radiometrically derived diameter using thermal data from Herschel and Spitzer Space Telescopes. This might indicate the existence of an unresolved satellite of up to $\sim$ 300 km in diameter, to account for all the thermal flux, although the occultation and thermal diameters are compatible within their error bars given the considerable uncertainty of the thermal results. The existence of a potential satellite also appears to be consistent with other ground-based data presented here. From the effective occultation diameter combined with H$_V$ measurements we derive a geometric albedo of 0.147 $\pm$ 0.005, which would be somewhat smaller if 2002TC302 has a satellite. The best occultation light curves do not show any signs of ring features or any signatures of a global atmosphere.

Non-resolved thermal infrared observations enable studies of thermal and physical properties of asteroid surfaces provided the shape and rotational properties of the target are well determined via thermo-physical models. We used calibration-programme Herschel PACS data (70, 100, 160 $\mu$m) and state-of-the-art shape models derived from adaptive-optics observations and/or optical light curves to constrain for the first time the thermal inertia of twelve large main-belt asteroids. We also modelled previously well-characterised targets such as (1) Ceres or (4) Vesta as they constitute important benchmarks. Using the scale as a free parameter, most targets required a re-scaling $\sim$5\% consistent with what would be expected given the absolute calibration error bars. This constitutes a good cross-validation of the scaled shape models, although some targets required larger re-scaling to reproduce the IR data. We obtained low thermal inertias typical of large main belt asteroids studied before, which continues to give support to the notion that these surfaces are covered by fine-grained insulating regolith. Although the wavelengths at which PACS observed are longwards of the emission peak for main-belt asteroids, they proved to be extremely valuable to constrain size and thermal inertia and not too sensitive to surface roughness. Finally, we also propose a graphical approach to help examine how different values of the exponent used for scaling the thermal inertia as a function of heliocentric distance (i.e. temperature) affect our interpretation of the results.

Here we present the results of visible range light curve observations of ten Centaurs using the Kepler Space Telescope in the framework of the K2 mission. Well defined periodic light curves are obtained in six cases allowing us to derive rotational periods, a notable increase in the number of Centaurs with known rotational properties. The low amplitude light curves of (471931) 2013 PH44 and (250112) 2002 KY14 can be explained either by albedo variegations, binarity or elongated shape. (353222) 2009 YD7 and (514312) 2016 AE193 could be rotating elongated objects, while 2017 CX33 and 2012 VU85 are the most promising binary candidates due to their slow rotations and higher light curve amplitudes. (463368) 2012 VU85 has the longest rotation period, P=56.2h observed among Centaurs. The P>20h rotation periods obtained for the two potential binaries underlines the importance of long, uninterrupted time series photometry of solar system targets that can suitably be performed only from spacecraft, like the Kepler in the K2 mission, and the currently running TESS mission.

In this paper we present the "Small Bodies: Near and Far" Infrared Database, an easy-to-use tool intended to facilitate the modeling of thermal emission of small Solar System bodies. Our database collects thermal emission measurements of small Solar Systems targets that are otherwise available in scattered sources and gives a complete description of the data, with all information necessary to perform direct scientific analyses and without the need to access additional, external resources. This public database contains representative data of asteroid observations of large surveys (e.g. AKARI, IRAS and WISE) as well as a collection of small body observations of infrared space telescopes (e.g. the Herschel Space Observatory) and provides a web interface to access this data (https://ird.konkoly.hu). We also provide an example for the direct application of the database and show how it can be used to estimate the thermal inertia of specific populations, e.g. asteroids within a given size range. We show how different scalings of thermal inertia with heliocentric distance (i.e. temperature) may affect our interpretation of the data and discuss why the widely-used radiative conductivity exponent ($\alpha$=-3/4) might not be adequate in general, as hinted by previous studies.

Thanks to the Gaia mission, it will be possible to determine the masses of approximately hundreds of large main belt asteroids with very good precision. We currently have diameter estimates for all of them that can be used to compute their volume and hence their density. However, some of those diameters are still based on simple thermal models, which can occasionally lead to volume uncertainties as high as 20-30%. The aim of this paper is to determine the 3D shape models and compute the volumes for 13 main belt asteroids that were selected from those targets for which Gaia will provide the mass with an accuracy of better than 10%. We used the genetic Shaping Asteroids with Genetic Evolution (SAGE) algorithm to fit disk-integrated, dense photometric lightcurves and obtain detailed asteroid shape models. These models were scaled by fitting them to available stellar occultation and/or thermal infrared observations. We determine the spin and shape models for 13 main belt asteroids using the SAGE algorithm. Occultation fitting enables us to confirm main shape features and the spin state, while thermophysical modeling leads to more precise diameters as well as estimates of thermal inertia values. We calculated the volume of our sample of main-belt asteroids for which the Gaia satellite will provide precise mass determinations. From our volumes, it will then be possible to more accurately compute the bulk density, which is a fundamental physical property needed to understand the formation and evolution processes of small solar system bodies.

Context. Earlier work suggests that slowly rotating asteroids should have higher thermal inertias than faster rotators because the heat wave penetrates deeper into the sub-surface. However, thermal inertias have been determined mainly for fast rotators due to selection effects in the available photometry used to obtain shape models required for thermophysical modelling (TPM). Aims. Our aims are to mitigate these selection effects by producing shape models of slow rotators, to scale them and compute their thermal inertia with TPM, and to verify whether thermal inertia increases with the rotation period. Methods. To decrease the bias against slow rotators, we conducted a photometric observing campaign of main-belt asteroids with periods longer than 12 hours, from multiple stations worldwide, adding in some cases data from WISE and Kepler space telescopes. For spin and shape reconstruction we used the lightcurve inversion method, and to derive thermal inertias we applied a thermophysical model to fit available infrared data from IRAS, AKARI, and WISE. Results. We present new models of 11 slow rotators that provide a good fit to the thermal data. In two cases, the TPM analysis showed a clear preference for one of the two possible mirror solutions. We derived the diameters and albedos of our targets in addition to their thermal inertias, which ranged between 3$^{+33}_{-3}$ and 45$^{+60}_{-30}$ Jm$^{-2}$s$^{-1/2}$K$^{-1}$. Conclusions. Together with our previous work, we have analysed 16 slow rotators from our dense survey with sizes between 30 and 150 km. The current sample thermal inertias vary widely, which does not confirm the earlier suggestion that slower rotators have higher thermal inertias.

NASA's OSIRIS-REx and JAXA's Hayabusa2 sample-return missions are currently on their way to encounter primitive near-Earth asteroids (101955) Bennu and (162173) Ryugu, respectively. Spectral and dynamical evidence indicates that these near-Earth asteroids originated in the inner part of the main belt. There are several primitive collisional families in this region, and both these asteroids are most likely to have originated in the Polana-Eulalia family complex. We present the expected spectral characteristics of both targets based on our studies of our primitive collisional families in the inner belt: Polana-Eulalia, Erigone, Sulamitis, and Clarissa. Observations were obtained in the framework of our PRIMitive Asteroids Spectroscopic Survey (PRIMASS). Our results are especially relevant to the planning and interpretation of in-situ images and spectra to be obtained by the two spacecraft during the encounters with their targets.

The AKARI IRC All-sky survey provided more than twenty thousand thermal infrared observations of over five thousand asteroids. Diameters and albedos were obtained by fitting an empirically calibrated version of the standard thermal model to these data. After the publication of the flux catalogue in October 2016, our aim here is to present the AKARI IRC all-sky survey data and discuss valuable scientific applications in the field of small-body physical properties studies. As an example, we update the catalogue of asteroid diameters and albedos based on AKARI using the near-Earth asteroid thermal model (NEATM). We fit the NEATM to derive asteroid diameters and, whenever possible, infrared beaming parameters. We obtained a total of 8097 diameters and albedos for 5170 asteroids, and we fitted the beaming parameter for almost two thousand of them. When it was not possible to fit the beaming parameter, we used a straight line fit to our sample's beaming parameter-versus-phase angle plot to set the default value for each fit individually instead of using a single average value. Our diameters agree with stellar-occultation-based diameters well within the accuracy expected for the model. They also match the previous AKARI-based catalogue at phase angles lower than 50 degrees, but we find a systematic deviation at higher phase angles, at which near-Earth and Mars-crossing asteroids were observed. The AKARI IRC All-sky survey provides observations at different observation geometries, rotational coverages and aspect angles. For example, by comparing in more detail a few asteroids for which dimensions were derived from occultations, we discuss how the multiple observations per object may already provide three-dimensional information about elongated objects even based on an idealised model like the NEATM.

The Cybele and Hilda dynamical groups delimit the outer edge of the asteroid belt. Their compositional distribution is a key element to constrain evolutionary models of the Solar System. In this paper, we present a compositional analysis of these populations using spectroscopic observations, SDSS and NEOWISE data. As part of the PRIMASS (Primitive Asteroids Spectroscopic Survey), we acquired visible spectra of 18 objects in Hilda or Cybele groups with the Goodman High Throughput Spectrometer at the 4.1m SOAR telescope and 20 near-IR spectra of Hilda objects with Near Infrared Camera Spectrograph at the 3.56m TNG. The sample is enlarged with spectra taken from the literature in order to increase our statistical analysis. The spectra were inspected for aqueous alteration bands and other spectral features that can be linked to compositional constraints. The analysis shows a continuous distribution of compositions from the main-belt to the Cybele, Hilda and Trojan regions. We also identify a population in the Trojans group not present in Hilda or Cybele objects.

The available set of spin and shape modelled asteroids is strongly biased against slowly rotating targets and those with low lightcurve amplitudes. As a consequence of these selection effects, the current picture of asteroid spin axis distribution, rotation rates, or radiometric properties, might be affected too. To counteract these selection effects, we are running a photometric campaign of a large sample of main belt asteroids omitted in most previous studies. We determined synodic rotation periods and verified previous determinations. When a dataset for a given target was sufficiently large and varied, we performed spin and shape modelling with two different methods. We used the convex inversion method and the non-convex SAGE algorithm, applied on the same datasets of dense lightcurves. Unlike convex inversion, the SAGE method allows for the existence of valleys and indentations on the shapes based only on lightcurves. We obtained detailed spin and shape models for the first five targets of our sample: (159) Aemilia, (227) Philosophia, (329) Svea, (478) Tergeste, and (487) Venetia. When compared to stellar occultation chords, our models obtained an absolute size scale and major topographic features of the shape models were also confirmed. When applied to thermophysical modelling, they provided a very good fit to the infrared data and allowed their size, albedo, and thermal inertia to be determined. Convex and non-convex shape models provide comparable fits to lightcurves. However, some non-convex models fit notably better to stellar occultation chords and to infrared data in sophisticated thermophysical modelling (TPM). In some cases TPM showed strong preference for one of the spin and shape solutions. Also, we confirmed that slowly rotating asteroids tend to have higher-than-average values of thermal inertia.

The combination of visible and thermal data from the ground and astrophysics space missions is key to improving the scientific understanding of near-Earth, main-belt, trojans, centaurs, and trans-Neptunian objects. To get full information on a small sample of selected bodies we combine different methods and techniques: lightcurve inversion, stellar occultations, thermophysical modeling, radiometric methods, radar ranging and adaptive optics imaging. The SBNAF project will derive size, spin and shape, thermal inertia, surface roughness, and in some cases bulk densities and even internal structure and composition, for objects out to the most distant regions in the Solar System. The applications to objects with ground-truth information allows us to advance the techniques beyond the current state-of-the-art and to assess the limitations of each method. We present results from our project's first phase: the analysis of combined Herschel-KeplerK2 data and Herschel-occultation data for TNOs; synergy studies on large MBAs from combined high-quality visual and thermal data; establishment of well-known asteroids as celestial calibrators for far-infrared, sub-millimetre, and millimetre projects; first results on near-Earth asteroids properties from combined lightcurve, radar and thermal measurements, as well as the Hayabusa-2 mission target characterisation. We also introduce public web-services and tools for studies of small bodies in general.

Eos family was created during a catastrophic impact about 1.3 Gyr ago. Rotation states of individual family members contain information about the history of the whole population. We aim to increase the number of asteroid shape models and rotation states within the Eos collision family, as well as to revise previously published shape models from the literature. Such results can be used to constrain theoretical collisional and evolution models of the family, or to estimate other physical parameters by a thermophysical modeling of the thermal infrared data. We use all available disk-integrated optical data (i.e., classical dense-in-time photometry obtained from public databases and through a large collaboration network as well as sparse-in-time individual measurements from a few sky surveys) as input for the convex inversion method, and derive 3D shape models of asteroids together with their rotation periods and orientations of rotation axes. We present updated shape models for 15 asteroids and new shape model determinations for 16 asteroids. Together with the already published models from the publicly available DAMIT database, we compiled a sample of 56 Eos family members with known shape models that we used in our analysis of physical properties within the family. Rotation states of asteroids smaller than ~20 km are heavily influenced by the YORP effect, whilst the large objects more or less retained their rotation state properties since the family creation. Moreover, we also present a shape model and bulk density of asteroid (423) Diotima, an interloper in the Eos family, based on the disk-resolved data obtained by the Near InfraRed Camera (Nirc2) mounted on the W.M. Keck II telescope.

Context. Mars-crossing asteroids (MCs) are a dynamically unstable group between the main belt and the near-Earth populations. Characterising the physical properties of a large sample of MCs can help to understand the original sources of many near-Earth asteroids, some of which may produce meteorites on Earth. Aims. Our aim is to provide diameters and albedos of MCs with available WISE/NEOWISE data. Methods. We used the near-Earth asteroid thermal model to find the best-fitting values of equivalent diameter and, whenever possible, the infrared beaming parameter. With the diameter and tabulated asteroid absolute magnitudes we also computed the visible geometric albedos. Results. We determined the diameters and beaming parameters of 404 objects observed during the fully cryogenic phase of the WISE mission, most of which have not been published elsewhere. We also obtained 1572 diameters from data from the 3-Band and posterior non-cryogenic phases using a default value of beaming parameter. The average beaming parameter is 1.2 +/- 0.2 for objects smaller than 10 km, which constitute most of our sample. This is higher than the typical value of 1.0 found for the whole main belt and is possibly related to the fact that WISE is able to observe many more small objects at shorter heliocentric distances, i.e. at higher phase angles. We argue that this is a better default value for modelling Mars-crossing asteroids from the WISE/NEOWISE catalogue and discuss the effects of this choice on the diameter and albedo distributions. We find a double-peaked distribution for the visible geometric albedos, which is expected since this population is compositionally diverse and includes objects in the major spectral complexes. However, the distribution of beaming parameters is homogeneous for both low- and high-albedo objects.

Two primitive near Earth asteroids, (101955) Bennu and (162173) Ryugu, will be visited by a spacecraft with the aim of returning samples back to Earth. Since these objects are believed to originate in the inner main belt primitive collisional families (Erigone, Polana, Clarissa, and Sulamitis) or in the background of asteroids outside these families, the characterization of these primitive populations will enhance the scientific return of the missions. The main goal of this work is to shed light on the composition of the Erigone collisional family by means of visible spectroscopy. Asteroid (163) Erigone has been classified as a primitive object, and we expect the members of this family to be consistent with the spectral type of the parent body. We have obtained visible spectra (0.5 to 0.9 microns) for 101 members of the Erigone family, using the OSIRIS instrument at the 10.4 m Gran Telescopio Canarias. We found that 87 percent of the objects have typically primitive visible spectra consistent with that of (163) Erigone. In addition, we found that a significant fraction of these objects (approximately 50 percent) present evidence of aqueous alteration.

The potentially hazardous asteroid (PHA) (99942) Apophis is one of the most remarkable near-Earth asteroids (NEA) in terms of impact hazard. A good determination of its surface thermal inertia is very important in order to evaluate the Yarkovsky effect on its orbital evolution. We present thermal infrared observations obtained on January 29, 2013, with CanariCam mid-infrared camera/spectrograph attached to the Gran Telescopio CANARIAS (GTC, Roque de los Muchachos Observatory, La Palma, Spain) using the Si2-8.7, Si6-12.5, and Q1-17.65 filters with the aim of deriving Apophis' diameter ($D$), geometric albedo ($p_V$), and thermal inertia ($\Gamma$). We performed a detailed thermophysical model analysis of the GTC data combined with previously published thermal data obtained using Herschel Space Observatory PACS instrument at 70, 100, and 160 $\mu$m.The thermophysical model fit of the data favors low surface roughness solutions (within a range of roughness slope angles $rms$ between 0.1 and 0.5), and constrains the effective diameter, visible geometric albedo, and thermal inertia of Apophis to be $D_{eff} =$~380 -- 393 m, $p_V = $~0.24--0.33 (assuming absolute magnitude $H = 19.09 \pm 0.19$) and $\Gamma =$~50 -- 500 Jm$^{-2}$ s$^{-0.5}$ K$^{-1}$, respectively.

The so-called "early activity" of comet 67P/Churyumov-Gerasimenko has been observed to originate mostly in parts of the concave region or "neck" between its two lobes. Since activity is driven by the sublimation of volatiles, this is a puzzling result because this area is less exposed to the Sun and is therefore expected to be cooler on average (Sierks et al. 2015). We used a thermophysical model that takes into account thermal inertia, global self-heating, and shadowing, to compute surface temperatures of the comet. We found that, for every rotation in the August--December 2014 period, some parts of the neck region undergo the fastest temperature variations of the comet's surface precisely because they are shadowed by their surrounding terrains. Our work suggests that these fast temperature changes are correlated to the early activity of the comet, and we put forward the hypothesis that erosion related to thermal cracking is operating at a high rate on the neck region due to these rapid temperature variations. This may explain why the neck contains some ice --as opposed to most other parts of the surface (Capaccioni et al. 2015)-- and why it is the main source of the comet's early activity (Sierks et al. 2015). In a broader context, these results indicate that thermal cracking can operate faster on atmosphereless bodies with significant concavities than implied by currently available estimates (Delbo' et al. 2014).

We present THERMAP, a mid-infrared (8-16 {\mu}m) spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it is both a thermal camera with full 2D imaging capabilities and a slit spectrometer. THERMAP takes advantage of the recent technological developments of uncooled microbolometers detectors, sensitive in the mid-infrared spectral range. THERMAP can acquire thermal images (8-18 {\mu}m) of the surface and perform absolute temperature measurements with a precision better than 3.5 K above 200 K. THERMAP can acquire mid-infrared spectra (8-16 {\mu}m) of the surface with a spectral resolution {\Delta}{\lambda} of 0.3 {\mu}m. For surface temperatures above 350 K, spectra have a signal-to-noise ratio >60 in the spectral range 9-13 {\mu}m where most emission features occur.

In the analysis of thermal infrared data of asteroids by means of thermophysical models (TPMs) it is a common practice to neglect the uncertainty of the shape model and the rotational state, which are taken as an input for the model. Here, we present a novel method of investigating the importance of the shape model and the pole orientation uncertainties in the thermophysical modeling - the varied shape TPM (VS-TPM). Our method uses optical photometric data to generate various shape models that map the uncertainty in the shape and the rotational state. The TPM procedure is then run for all these shape models. We apply the implementation of the classical TPM as well as our VS-TPM to the convex shape models of several asteroids together with their thermal infrared data acquired by the NASA's Wide-field Infrared Survey Explorer (WISE) and compare the results. These show that the uncertainties of the shape model and the pole orientation can be very important (e.g., for the determination of the thermal inertia) and should be considered in the thermophysical analyses. We present thermophysical properties for six asteroids - (624) Hektor, (771) Libera, (1036) Ganymed, (1472) Muonio, (1627) Ivar, and (2606) Odessa.

Using our photometric observations taken between 1996 and 2013 and other published data, we derived properties of the binary near-Earth asteroid (175706) 1996 FG3 including new measurements constraining evolution of the mutual orbit with potential consequences for the entire binary asteroid population. We also refined previously determined values of parameters of both components, making 1996 FG3 one of the most well understood binary asteroid systems. We determined the orbital vector with a substantially greater accuracy than before and we also placed constraints on a stability of the orbit. Specifically, the ecliptic longitude and latitude of the orbital pole are 266{\deg} and -83{\deg}, respectively, with the mean radius of the uncertainty area of 4{\deg}, and the orbital period is 16.1508 +/- 0.0002 h (all quoted uncertainties correspond to 3sigma). We looked for a quadratic drift of the mean anomaly of the satellite and obtained a value of 0.04 +/- 0.20 deg/yr^2, i.e., consistent with zero. The drift is substantially lower than predicted by the pure binary YORP (BYORP) theory of McMahon and Scheeres (McMahon, J., Scheeres, D. [2010]. Icarus 209, 494-509) and it is consistent with the theory of an equilibrium between BYORP and tidal torques for synchronous binary asteroids as proposed by Jacobson and Scheeres (Jacobson, S.A., Scheeres, D. [2011]. ApJ Letters, 736, L19). Based on the assumption of equilibrium, we derived a ratio of the quality factor and tidal Love number of Q/k = 2.4 x 10^5 uncertain by a factor of five. We also derived a product of the rigidity and quality factor of mu Q = 1.3 x 10^7 Pa using the theory that assumes an elastic response of the asteroid material to the tidal forces. This very low value indicates that the primary of 1996 FG3 is a 'rubble pile', and it also calls for a re-thinking of the tidal energy dissipation in close asteroid binary systems.

Aims. To derive the thermal inertia of 2008 EV$_5$, the baseline target for the Marco Polo-R mission proposal, and infer information about the size of the particles on its surface. Methods. Values of thermal inertia are obtained by fitting an asteroid thermophysical model to NASA's Wide-field Infrared Survey Explorer (WISE) infrared data. From the constrained thermal inertia and a model of heat conductivity that accounts for different values of the packing fraction (a measure of the degree of compaction of the regolith particles), grain size is derived. Results. We obtain an effective diameter $D = 370 \pm 6\,\mathrm{m}$, geometric visible albedo $p_V = 0.13 \pm 0.05$ (assuming $H=20.0 \pm 0.4$), and thermal inertia $\Gamma = 450 \pm 60$ J/m2/s(1/2)/K at the 1-$\sigma$ level of significance for its retrograde spin pole solution. The regolith particles radius is $r = 6.6^{+1.3}_{-1.3}$ mm for low degrees of compaction, and $r = 12.5^{+2.7}_{-2.6}$ mm for the highest packing densities.

Aims: Our aim is to obtain more information about the physical nature of B-type asteroids and extend on the previous work by studying their physical properties derived from fitting an asteroid thermal model to their NASA's Wide-field Infrared Survey Explorer (WISE) data. We also examine the Pallas collisional family, a B-type family with a moderately high albedo in contrast to the large majority of B-types. Methods: We apply a combination of the NEATM and a model of the reflected sunlight to WISE asteroid data in order to derive effective diameter (D), the so-called infrared beaming parameter (\eta), ratio of infrared to visible albedo (R_p = p_{IR}/p_V) and visible geometric albedo (p_V). Results: We obtained parameter values for $\ga$ 100 B-types asteroids and plotted the value distributions of p_V, R_p and \eta (p_V = 0.07 +- 0.03$, R_p = 1.0 +- 0.2, and \eta = 1.0 +- 0.1). By combining the IR and visible albedos with 2.5-micron reflectances from the literature we obtained the ratio of reflectances at 3.4 and 2.5 micron, from which we found statistically significant indications that the presence of a 3-micron absorption band related to water may be commonplace among the B-types. Finally, the Pallas collisional family members studied ($\sim$ 50 objects) present moderately high values of p_V (p_V = 0.14 +- 0.05), significantly higher than the average albedo of B-types. In addition, this family presents the lowest and most homogeneously distributed R_p-values of our whole sample, which shows that this group is clearly different from the rest, likely because its members are pieces probably originating from the same region of (2) Pallas, a particularly high-albedo B-type asteroid.