The mass of a star is the most fundamental parameter for its structure, evolution, and final fate. It is particularly important for any kind of stellar archaeology and characterization of exoplanets. There exists a variety of methods in astronomy to estimate or determine it. In this review we present a significant number of such methods, beginning with the most direct and model-independent approach using detached eclipsing binaries. We then move to more indirect and model-dependent methods, such as the quite commonly used isochrone or stellar track fitting. The arrival of quantitative asteroseismology has opened a completely new approach to determine stellar masses and to complement and improve the accuracy of other methods. We include methods for different evolutionary stages, from the pre-main sequence to evolved (super)giants and final remnants. For all methods uncertainties and restrictions will be discussed. We provide lists of altogether more than 200 benchmark stars with relative mass accuracies between $[0.3,2]\%$ for the covered mass range of $M\in [0.1,16]\,M_\odot$, $75\%$ of which are stars burning hydrogen in their core and the other $25\%$ covering all other evolved stages. We close with a recommendation how to combine various methods to arrive at a "mass-ladder" for stars.

HARPS spectra with signal-to-noise ratios S/N > 600 at 6000 A were analysed with MARCS model atmospheres to obtain 1D LTE abundances of C, O, Na, Mg, Al, Si, Ca, Ti, Cr, Fe, Ni, Sr, and Y for 72 nearby solar-type stars with metallicities in the range -0.3 < [Fe/H] < +0.3 and ASTEC stellar models were used to determine stellar ages from effective temperatures, luminosities obtained via Gaia DR2 parallaxes, and heavy element abundances. The resulting age-metallicity distribution appears to consist of two distinct populations: a sequence of old stars with a steep rise of [Fe/H] to about +0.3 dex at an age of ~7 Gyr and a younger sequence with [Fe/H] increasing from -0.3 dex to about +0.2 dex over the last six Gyr. Furthermore, the trends of several abundance ratios, [O/Fe], [Na/Fe], [Ca/Fe], and [Ni/Fe], as a function of stellar age split into two corresponding sequences. The [Y/Mg]-age relation, on the other hand, shows no offset between the two age sequences and has no significant dependence on [Fe/H], but the components of a visual binary star, zeta Reticuli, have a large and puzzling deviation. The split of the age-metallicity distribution into two sequences may be interpreted as evidence of two episodes of accretion of gas onto the Galactic disk with a quenching of star formation in between. Some of the [X/Fe]-age relations support this scenario but other relations are not so easy to explain, which calls for a deeper study of systematic errors in the derived abundances as a function of [Fe/H], in particular 3D non-LTE effects.

This paper documents the sixteenth data release (DR16) from the Sloan Digital Sky Surveys; the fourth and penultimate from the fourth phase (SDSS-IV). This is the first release of data from the southern hemisphere survey of the Apache Point Observatory Galactic Evolution Experiment 2 (APOGEE-2); new data from APOGEE-2 North are also included. DR16 is also notable as the final data release for the main cosmological program of the Extended Baryon Oscillation Spectroscopic Survey (eBOSS), and all raw and reduced spectra from that project are released here. DR16 also includes all the data from the Time Domain Spectroscopic Survey (TDSS) and new data from the SPectroscopic IDentification of ERosita Survey (SPIDERS) programs, both of which were co-observed on eBOSS plates. DR16 has no new data from the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey (or the MaNGA Stellar Library "MaStar"). We also preview future SDSS-V operations (due to start in 2020), and summarize plans for the final SDSS-IV data release (DR17).

In their evolution, star-forming galaxies are known to follow scaling relations between some fundamental physical quantities, such as the mass-metallicity and the main sequence relations. We aim at studying the evolution of galaxies that, at a given redshift, lie simultaneously on the mass-metallicity (MZ) and main sequence (MS) relations. To this aim, we use the analytical, 'leaky-box' chemical evolution model of Spitoni et al. (2017), in which galaxy evolution is described by an infall timescale $\tau$ and a wind efficiency $\lambda$. We provide a detailed analysis of the temporal evolution of galactic metallicity, stellar mass, mass-weighted age and gas fraction. The evolution of the galaxies lying on the MZ and MS at $z\sim0.1$ suggests that the average infall time-scale in two different bins of stellar masses ($M_{\star}<10^{10} M_{\odot}$ and $M_{\star}>10^{10} M_{\odot}$) decreases with decreasing redshift. This means that at each redshift, only the youngest galaxies can be assembled on the shortest timescales and still belong to the MS. In the lowest mass bin, a decrease of the median $\tau$ is accompanied by an increase of the median $\lambda$ value. This implies that systems which have formed at more recent times will need to eject a larger amount of mass to keep their metallicity at low values. Another important result is that galactic downsizing, as traced by the age-mass relation, is naturally recovered by imposing that local galaxies lie on both the MZ and MS. Finally, we study the evolution of the hosts of C IV-selected AGN, which at $z\sim 2$ follow a flat MZ, as found by Mignoli et al. (2019). If we impose that these systems lie on the MS, at lower redshifts we find an 'inverted' MZ, meaning that some additional processes must be at play in their evolution.

Context. The large quantity of high-quality asteroseismic data that obtained from space-based photometric missions and the accuracy of the resulting frequencies motivate a careful consideration of the accuracy of computed oscillation frequencies of stellar models, when applied as diagnostics of the model properties. Aims. Based on models of red-giant stars that have been independently calculated using different stellar evolution codes, we investigate the extent to which the differences in the model calculation affect the model oscillation frequencies. Methods. For each of the models, which cover four different masses and different evolution stages on the red-giant branch, we computed full sets of low-degree oscillation frequencies using a single pulsation code and, from these frequencies, typical asteroseismic diagnostics. In addition, we carried out preliminary analyses to relate differences in the oscillation properties to the corresponding model differences. Results. In general, the differences in asteroseismic properties between the different models greatly exceed the observational precision of these properties, in particular for the nonradial modes whose mixed acoustic and gravity-wave character makes them sensitive to the structure of the deep stellar interior. In some cases, identifying these differences led to improvements in the final models presented here and in Paper I; here we illustrate particular examples of this. Conclusions. Further improvements in stellar modelling are required in order fully to utilise the observational accuracy to probe intrinsic limitations in the modelling. However, our analysis of the frequency differences and their relation to stellar internal properties provides a striking illustration of the potential of the mixed modes of red-giant stars for the diagnostics of stellar interiors.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data

With the wealth of information from large surveys and observational campaigns in the contemporary era, it is critical to properly exploit the data to constrain the parameters of Galactic chemical evolution models and quantify the associated uncertainties. We aim at constraining the two-infall chemical evolution models for the solar annulus using the measured chemical abundance ratios and seismically inferred age of stars in the APOKASC sample. In the revised two-infall chemical evolution models by Spitoni et al. (2019), a significant delay of $\sim 4.3$ Gyr has been invoked between the two episodes of gas accretion. In this work, we wish to test its robustness and statistically confirm/quantify the delay. For the first time, a Bayesian framework based on Markov Chain Monte Carlo methods has been used for fitting the two-infall chemical evolution models to the data. In addition to fitting the data for stars in the APOKASC sample, our best fit models also reproduce other important observational constraints of the chemical evolution of the disk: i) present day stellar surface density; ii) present day supernova and star formation rates; iii) the metallicity distribution function; and iv) solar abundance values. We found a significant delay between the two gas accretion episodes for various models explored with different values for the star formation efficiencies. The values for the delay lie in the range $4.5-5.5$ Gyr. The results suggest that the APOKASC sample carries the signature of delayed gas-rich merger, with the dilution as main process determining the shape of low-$\alpha$ stars in the abundance ratios space.

We report the discovery of a warm sub-Saturn, TOI-257b (HD 19916b), based on data from NASA's Transiting Exoplanet Survey Satellite (TESS). The transit signal was detected by TESS and confirmed to be of planetary origin based on radial-velocity observations with the Minerva-Australis telescope array. An analysis of the TESS photometry, the Minerva-Australis, FEROS, and HARPS radial velocities, and the asteroseismic data of the stellar oscillations reveals that TOI-257b has a mass of $M_P=0.134^{+0.023}_{-0.022}$$\rm{M_J}$ ($42.6^{+7.3}_{-7.0}$$\rm{M_{\oplus}}$), a radius of $R_P=0.626^{+0.013}_{-0.012}$$\rm{R_J}$ ($7.02^{+0.15}_{-0.13}$$\rm{R_{\oplus}}$), and an orbit with eccentricity $0.242^{+0.040}_{-0.065}$ and period $18.38827\pm0.00072$$\rm{days}$. TOI-257b orbits a bright ($\mathrm{V}=7.570$mag) somewhat evolved late F-type star with $M_*=1.390\pm0.046$$\rm{M_{\odot}}$, $R_*=1.888\pm0.033$$\rm{R_{\odot}}$, $T_{\rm eff}=6075\pm90$$\rm{K}$, and $v\sin{i}=11.3\pm0.5$km/s. Additionally, we statistically validate a second non-transiting sub-Saturn mass planet on a $\sim71$day orbit using the radial velocity data. This system joins the ranks of a small number of exoplanet host stars that have been characterized with asteroseismology. Warm sub-Saturns are rare in the known sample of exoplanets, and thus the discovery of TOI-257b is important in the context of future work studying the formation and migration history of similar planetary systems.

Over the course of its history, the Milky Way has ingested multiple smaller satellite galaxies. While these accreted stellar populations can be forensically identified as kinematically distinct structures within the Galaxy, it is difficult in general to precisely date the age at which any one merger occurred. Recent results have revealed a population of stars that were accreted via the collision of a dwarf galaxy, called \textit{Gaia}-Enceladus, leading to a substantial pollution of the chemical and dynamical properties of the Milky Way. Here, we identify the very bright, naked-eye star $\nu$\,Indi as a probe of the age of the early in situ population of the Galaxy. We combine asteroseismic, spectroscopic, astrometric, and kinematic observations to show that this metal-poor, alpha-element-rich star was an indigenous member of the halo, and we measure its age to be $11.0 \pm 0.7$ (stat) $\pm 0.8$ (sys)$\,\rm Gyr$. The star bears hallmarks consistent with it having been kinematically heated by the \textit{Gaia}-Enceladus collision. Its age implies that the earliest the merger could have begun was 11.6 and 13.2 Gyr ago at 68 and 95% confidence, respectively. Input from computations based on hierarchical cosmological models tightens (i.e. reduces) slightly the above limits.

(Abridged). We introduce the Aarhus Red Giants Challenge, a series of detailed comparisons between widely used stellar evolution and oscillation codes aiming at establishing the minimum level of uncertainties in properties of red giants arising solely from numerical implementations. Using 9 state-of-the-art stellar evolution codes, we defined a set of input physics and physical constants for our calculations and calibrated the convective efficiency to a specific point on the main sequence. We produced evolutionary tracks and stellar structure models at fixed radius along the red-giant branch for masses of 1.0 M$_\odot$, 1.5 M$_\odot$, 2.0 M$_\odot$, and 2.5 M$_\odot$, and compared the predicted stellar properties. Once models have been calibrated on the main sequence we find a residual spread in the predicted effective temperatures across all codes of ~20 K at solar radius and ~30-40 K in the RGB regardless of the considered stellar mass. The predicted ages show variations of 2-5% (increasing with stellar mass) which we track down to differences in the numerical implementation of energy generation. The luminosity of the RGB-bump shows a spread of about 10% for the considered codes, which translates into magnitude differences of ~0.1 mag in the optical V-band. We also compare the predicted [C/N] abundance ratio and found a spread of 0.1 dex or more for all considered masses. Our comparisons show that differences at the level of a few percent still remain in evolutionary calculations of red giants branch stars despite the use of the same input physics. These are mostly due to differences in the energy generation routines and interpolation across opacities, and call for further investigations on these matters in the context of using properties of red giants as benchmarks for astrophysical studies.

We revisit the analysis of the bright multiplanet system K2-93, discovered with data taken by the K2 mission. This system contains five identified planets ranging in size from sub-Neptune to Jupiter size. The K2 data available at the discovery of the system only showed single transits for the three outer planets, which allowed weak constraints to be put on their periods. As these planets are interesting candidates for future atmospheric studies, a better characterization of the host star and tighter constraints on their orbital periods are essential. Using new data from the K2 mission taken after the discovery of the system, we perform an asteroseismic characterization of the host star. We are able to place strong constraints on the stellar parameters and obtain a value for the stellar mass of $1.22^{+0.03}_{-0.02}\, \rm M_{\odot}$, a stellar radius of $1.30\pm 0.01\, \rm R_{\odot}$, and an age of $2.07^{+0.36}_{-0.27}$ Gyr. Put together with the additional transits identified for two of the three outer planets, we constrain the orbital periods of the outer planets and provide updated estimates for the stellar reflex velocities induced by the planets.

Stellar magnetic activity decays over the main-sequence life of cool stars due to the stellar spin-down driven by magnetic braking. The evolution of chromospheric emission is well-studied for younger stars, but difficulties in determining the ages of older cool stars on the main sequence have complicated such studies for older stars in the past. Here we report on chromospheric Ca II H and K line measurements for 26 main-sequence cool stars with asteroseismic ages older than a gigayear and spectral types F and G. We find that for the G stars and the cooler F-type stars which still have convective envelopes the magnetic activity continues to decrease at stellar ages above one gigayear. Our magnetic activity measurements do not show evidence for a stalling of the magnetic braking mechanism, which has been reported for stellar rotation versus age for G and F type stars. We also find that the measured R'HK indicator value for the cool F stars in our sample is lower than predicted by common age-activity relations that are mainly calibrated on data from young stellar clusters. We conclude that, within individual spectral type bins, chromospheric magnetic activity correlates well with stellar age even for old stars.

Models of stellar structure and evolution are an indispensable tool in astrophysics, yet they are known to incorrectly reproduce the outer convective layers of stars. In the first paper of this series, we presented a novel procedure to include the mean structure of 3D hydrodynamical simulations on-the-fly in stellar models, and found it to significantly improve the outer stratification and oscillation frequencies of a standard solar model. In the present work, we extend the analysis of the method; specifically how the transition point between envelope and interior affects the models. We confirm the versatility of our method by successfully repeating the entire procedure for a different grid of 3D hydro-simulations. Furthermore, the applicability of the procedure was investigated across the HR diagram and an accuracy comparable to the solar case was found. Moreover, we explored the implications on stellar evolution and find that the red-giant branch is shifted about 40 K to higher effective temperatures. Finally, we present for the first time an asteroseismic analysis based on stellar models fully utilising the stratification of 3D simulations on-the-fly. These new models significantly reduce the asteroseismic surface term for the two selected stars in the Kepler field. We extend the analysis to red giants and characterise the shape of the surface effect in this regime. Lastly, we stress that the interpolation required by our method would benefit from new 3D simulations, resulting in a finer sampling of the grid.

The Transiting Exoplanet Survey Satellite (TESS) is performing a near all-sky survey for planets that transit bright stars. In addition, its excellent photometric precision enables asteroseismology of solar-type and red-giant stars, which exhibit convection-driven, solar-like oscillations. Simulations predict that TESS will detect solar-like oscillations in nearly 100 stars already known to host planets. In this paper, we present an asteroseismic analysis of the known red-giant host stars HD 212771 and HD 203949, both systems having a long-period planet detected through radial velocities. These are the first detections of oscillations in previously known exoplanet-host stars by TESS, further showcasing the mission's potential to conduct asteroseismology of red-giant stars. We estimate the fundamental properties of both stars through a grid-based modeling approach that uses global asteroseismic parameters as input. We discuss the evolutionary state of HD 203949 in depth and note the large discrepancy between its asteroseismic mass ($M_\ast = 1.23 \pm 0.15\,{\rm M}_\odot$ if on the red-giant branch or $M_\ast = 1.00 \pm 0.16\,{\rm M}_\odot$ if in the clump) and the mass quoted in the discovery paper ($M_\ast = 2.1 \pm 0.1\,{\rm M}_\odot$), implying a change $>30\,\%$ in the planet's mass. Assuming HD 203949 to be in the clump, we investigate the planet's past orbital evolution and discuss how it could have avoided engulfment at the tip of the red-giant branch. Finally, HD 212771 was observed by K2 during its Campaign 3, thus allowing for a preliminary comparison of the asteroseismic performances of TESS and K2. We estimate the ratio of the observed oscillation amplitudes for this star to be $A_{\rm max}^{\rm TESS}/A_{\rm max}^{\rm K2} = 0.75 \pm 0.14$, consistent with the expected ratio of $\sim0.85$ due to the redder bandpass of TESS.

Recent developments in asteroseismology -- thanks to space-based missions such as {\it CoRoT} and {\it Kepler} -- provide handles on those properties of stars that were either completely inaccessible in the past or only poorly measured. Among several such properties is the surface helium abundance of F and G stars. We used the oscillatory signature introduced by the ionization of helium in the observed oscillation frequencies to constrain the amount of helium settling in F stars. For this purpose, we identified three promising F stars for which the standard models of atomic diffusion predict large settling (or complete depletion) of surface helium. Assuming turbulence at the base of envelope convection zone slows down settling of the helium and heavy elements, we found an envelope mixed mass of approximately $5 \times 10^{-4}$M$_\odot$ necessary to reproduce the observed amplitude of helium signature for all the three stars. This is much larger than the mixed mass of the order of $10^{-6}$M$_\odot$ found in the previous studies performed using the measurements of the heavy element abundances. This demonstrates the potential of using the helium signature together with measurements of the heavy element abundances to identify the most important physical processes competing against atomic diffusion, allowing eventually to correctly interpret the observed surface abundances of hot stars, consistent use of atomic diffusion in modelling both hot and cool stars, and shed some light on the long-standing cosmological lithium problem.

We present an in-depth analysis of the bright subgiant HR 7322 (KIC 10005473) using Kepler short-cadence photometry, optical interferometry from CHARA, high-resolution spectra from SONG, and stellar modelling using GARSTEC grids and the Bayesian grid-fitting algorithm BASTA. HR 7322 is only the second subgiant with high-quality Kepler asteroseismology for which we also have interferometric data. We find a limb-darkened angular diameter of $0.443 \pm 0.007$ mas, which, combined with a distance derived using the parallax from Gaia DR2 and a bolometric flux, yields a linear radius of $2.00 \pm 0.03$ R$_{\odot}$ and an effective temperature of $6350 \pm 90$ K. HR 7322 exhibits solar-like oscillations, and using the asteroseismic scaling relations and revisions thereof, we find good agreement between asteroseismic and interferometric stellar radius. The level of precision reached by the careful modelling is to a great extent due to the presence of an avoided crossing in the dipole oscillation mode pattern of HR 7322. We find that the standard models predict radius systematically smaller than the observed interferometric one and that a sub-solar mixing length parameter is needed to achieve a good fit to individual oscillation frequencies, interferometric temperature, and spectroscopic metallicity.

In the Sun, the properties of acoustic modes are sensitive to changes in the magnetic activity. In particular, mode frequencies are observed to increase with increasing activity level. Thanks to CoRoT and Kepler, such variations have been found in other solar-type stars and encode information on the activity-related changes in their interiors. Thus, the unprecedented long-term Kepler photometric observations provide a unique opportunity to study stellar activity through asteroseismology. The goal of this work is to investigate the dependencies of the observed mode frequency variations on the stellar parameters and whether those are consistent with an activity-related origin. We select the solar-type oscillators with highest signal-to-noise ratio, in total 75 targets. Using the temporal frequency variations determined in Santos et al. (2018), we study the relation between those variations and the fundamental stellar properties. We also compare the observed frequency shifts with chromospheric and photometric activity indexes, which are only available for a subset of the sample. We find that frequency shifts increase with increasing chromospheric activity, which is consistent with an activity-related origin of the observed frequency shifts. Frequency shifts are also found to increase with effective temperature, which is in agreement with the theoretical predictions for the activity-related frequency shifts by Metcalfe et al. (2007). Frequency shifts are largest for fast rotating and young stars, which is consistent with those being more active than slower rotators and older stars. Finally, we find evidence for frequency shifts increasing with stellar metallicity.

The next decade affords tremendous opportunity to achieve the goals of Galactic archaeology. That is, to reconstruct the evolutionary narrative of the Milky Way, based on the empirical data that describes its current morphological, dynamical, temporal and chemical structures. Here, we describe a path to achieving this goal. The critical observational objective is a Galaxy-scale, contiguous, comprehensive mapping of the disk's phase space, tracing where the majority of the stellar mass resides. An ensemble of recent, ongoing, and imminent surveys are working to deliver such a transformative stellar map. Once this empirical description of the dust-obscured disk is assembled, we will no longer be operationally limited by the observational data. The primary and significant challenge within stellar astronomy and Galactic archaeology will then be in fully utilizing these data. We outline the next-decade framework for obtaining and then realizing the potential of the data to chart the Galactic disk via its stars. One way to support the investment in the massive data assemblage will be to establish a Galactic Archaeology Consortium across the ensemble of stellar missions. This would reflect a long-term commitment to build and support a network of personnel in a dedicated effort to aggregate, engineer, and transform stellar measurements into a comprehensive perspective of our Galaxy.

The problem of the origin of the elements is a fundamental one in astronomy and one that has many open questions. Prominent examples include (1) the nature of Type Ia supernovae and the timescale of their contributions; (2) the observational identification of elements such as titanium and potassium with the $\alpha$-elements in conflict with core-collapse supernova predictions; (3) the number and relative importance of r-process sites; (4) the origin of carbon and nitrogen and the influence of mixing and mass loss in winds; and (5) the origin of the intermediate elements, such as Cu, Ge, As, and Se, that bridge the region between charged-particle and neutron-capture reactions. The next decade will bring to maturity many of the new tools that have recently made their mark, such as large-scale chemical cartography of the Milky Way and its satellites, the addition of astrometric and asteroseismic information, the detection and characterization of gravitational wave events, 3-D simulations of convection and model atmospheres, and improved laboratory measurements for transition probabilities and nuclear masses. All of these areas are key for continued improvement, and such improvement will benefit many areas of astrophysics.

Galactic disc chemical evolution models generally ignore azimuthal surface density variation that can introduce chemical abundance azimuthal gradients. Recent observations, however, have revealed chemical abundance changes with azimuth in the gas and stellar components of both the Milky Way and external galaxies. To quantify the effects of spiral arm density fluctuations on the azimuthal variations of the oxygen and iron abundances in disc galaxies. We develop a new 2D galactic disc chemical evolution model, capable of following not just radial but also azimuthal inhomogeneities. The density fluctuations resulting from a Milky Way-like N-body disc formation simulation produce azimuthal variations in the oxygen abundance gradients of the order of 0.1 dex. Moreover, in agreement with the most recent observations in external galaxies, the azimuthal variations are more evident in the outer galactic regions. Using a simple analytical model, we show that the largest fluctuations with azimuth result near the spiral structure corotation resonance, where the relative speed between spiral and gaseous disc is the slowest. In conclusion we provided a new 2D chemical evolution model capable of following azimuthal density variations. Density fluctuations extracted from a Milky Way-like dynamical model lead to a scatter in the azimuthal variations of the oxygen abundance gradient in agreement with observations in external galaxies. We interpret the presence of azimuthal scatter at all radii by the presence of multiple spiral modes moving at different pattern speeds, as found in both observations and numerical simulations.

The kinematics of the Milky Way disc as a function of age are well measured at the solar radius, but have not been studied over a wider range of Galactocentric radii. Here, we measure the kinematics of mono-age, mono-$\mathrm{[Fe/H]}$ populations in the low and high $\mathrm{[\alpha/Fe]}$ discs between $4 \lesssim R \lesssim 13$ kpc and $|z| \lesssim 2$ kpc using 65,719 stars in common between APOGEE DR14 and $\it{Gaia}$ DR2 for which we estimate ages using a Bayesian neural network model trained on asteroseismic ages. We determine the vertical and radial velocity dispersions, finding that the low and high $\mathrm{[\alpha/Fe]}$ discs display markedly different age--velocity-dispersion relations (AVRs) and shapes $\sigma_z/\sigma_R$. The high $\mathrm{[\alpha/Fe]}$ disc has roughly flat AVRs and constant $\sigma_z/\sigma_R = 0.64\pm 0.04$, whereas the low $\mathrm{[\alpha/Fe]}$ disc has large variations in this ratio which positively correlate with the mean orbital radius of the population at fixed age. The high $\mathrm{[\alpha/Fe]}$ disc component's flat AVRs and constant $\sigma_z/\sigma_R$ clearly indicates an entirely different heating history. Outer disc populations also have flatter radial AVRs than those in the inner disc, likely due to the waning effect of spiral arms. Our detailed measurements of AVRs and $\sigma_z/\sigma_R$ across the disc indicate that low $\mathrm{[\alpha/Fe]}$, inner disc ($R \lesssim 10\,\mathrm{kpc}$) stellar populations are likely dynamically heated by both giant molecular clouds and spiral arms, while the observed trends for outer disc populations require a significant contribution from another heating mechanism such as satellite perturbations. We also find that outer disc populations have slightly positive mean vertical and radial velocities, likely because they are part of the warped disc.

We present the first data release of the Kepler Smear Campaign, using collateral 'smear' data obtained in the Kepler four-year mission to reconstruct light curves of 102 stars too bright to have been otherwise targeted. We describe the pipeline developed to extract and calibrate these light curves, and show that we attain photometric precision comparable to stars analyzed by the standard pipeline in the nominal Kepler mission. In this paper, aside from publishing the light curves of these stars, we focus on 66 red giants for which we detect solar-like oscillations, characterizing 33 of these in detail with spectroscopic chemical abundances and asteroseismic masses as benchmark stars. We also classify the whole sample, finding nearly all to be variable, with classical pulsations and binary effects. All source code, light curves, TRES spectra, and asteroseismic and stellar parameters are publicly available as a Kepler legacy sample.

We present the first chemical evolution model for Enceladus, alias the Gaia Sausage, to investigate the star formation history of one of the most massive satellites accreted by the Milky Way during a major merger event. Our best chemical evolution model for Enceladus nicely fits the observed stellar [$\alpha$/Fe]-[Fe/H] chemical abundance trends, and reproduces the observed stellar metallicity distribution function, by assuming low star formation efficiency, fast infall time scale, and mild outflow intensity. We predict a median age for Enceladus stars $12.33^{+0.92}_{-1.36}$ Gyr, and - at the time of the merger with our Galaxy ($\approx10$ Gyr ago from Helmi et al.) - we predict for Enceladus a total stellar mass $M_{\star} \approx 5 \times 10^{9}\,\text{M}_{\odot}$. By looking at the predictions of our best model, we discuss that merger events between the Galaxy and systems like Enceladus may have inhibited the gas accretion onto the Galaxy disc at high redshifts, heating up the gas in the halo. This scenario could explain the extended period of quenching in the star formation activity of our Galaxy about 10 Gyr ago, which is predicted by Milky Way chemical evolution models, in order to reproduce the observed bimodality in [$\alpha$/Fe]-[Fe/H] between thick- and thin-disc stars.

(Abridged) The Maunakea Spectroscopic Explorer (MSE) is an end-to-end science platform for the design, execution and scientific exploitation of spectroscopic surveys. It will unveil the composition and dynamics of the faint Universe and impact nearly every field of astrophysics across all spatial scales, from individual stars to the largest scale structures in the Universe. Major pillars in the science program for MSE include (i) the ultimate Gaia follow-up facility for understanding the chemistry and dynamics of the distant Milky Way, including the outer disk and faint stellar halo at high spectral resolution (ii) galaxy formation and evolution at cosmic noon, via the type of revolutionary surveys that have occurred in the nearby Universe, but now conducted at the peak of the star formation history of the Universe (iii) derivation of the mass of the neutrino and insights into inflationary physics through a cosmological redshift survey that probes a large volume of the Universe with a high galaxy density. MSE is positioned to become a critical hub in the emerging international network of front-line astronomical facilities, with scientific capabilities that naturally complement and extend the scientific power of Gaia, the Large Synoptic Survey Telescope, the Square Kilometer Array, Euclid, WFIRST, the 30m telescopes and many more.

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology.

Asteroseismology is the only observational tool in astronomy that can probe the interiors of stars, and is a benchmark method for deriving fundamental properties of stars and exoplanets. Over the coming decade, space-based and ground-based observations will provide a several order of magnitude increase of solar-like oscillators, as well as a dramatic increase in the number and quality of classical pulsator observations, providing unprecedented possibilities to study stellar physics and galactic stellar populations. In this white paper, we describe key science questions and necessary facilities to continue the asteroseismology revolution into the 2020's.

Galactic interstellar dust has a profound impact not only on our observations of objects throughout the Universe, but also on the morphology, star formation, and chemical evolution of the Galaxy. The advent of massive imaging and spectroscopic surveys (particularly in the infrared) places us on the threshold of being able to map the properties and dynamics of dust and the interstellar medium (ISM) in three dimensions throughout the Milky Way disk and bulge. These developments will enable a fundamentally new understanding of dust properties, including how grains respond to their local environment and how those environments affect dust attenuation of background objects of interest. Distance-resolved maps of dust motion also hold great promise for tracing the flow of interstellar material throughout the Galaxy on a variety of scales, from bar-streaming motions to the collapse and dissolution of individual molecular clouds. These advances require optical and infrared imaging of stars throughout the Galactic midplane, stretching many kiloparsecs from the Sun, matched with very dense spectroscopic coverage to probe the ISM's fine-grained structure.

The Maunakea Spectroscopic Explorer (MSE) is a planned 11.25-m aperture facility with a 1.5 square degree field of view that will be fully dedicated to multi-object spectroscopy. A rebirth of the 3.6m Canada-France-Hawaii Telescope on Maunakea, MSE will use 4332 fibers operating at three different resolving powers (R ~ 2500, 6000, 40000) across a wavelength range of 0.36-1.8mum, with dynamical fiber positioning that allows fibers to match the exposure times of individual objects. MSE will enable spectroscopic surveys with unprecedented scale and sensitivity by collecting millions of spectra per year down to limiting magnitudes of g ~ 20-24 mag, with a nominal velocity precision of ~100 m/s in high-resolution mode. This white paper describes science cases for stellar astrophysics and exoplanet science using MSE, including the discovery and atmospheric characterization of exoplanets and substellar objects, stellar physics with star clusters, asteroseismology of solar-like oscillators and opacity-driven pulsators, studies of stellar rotation, activity, and multiplicity, as well as the chemical characterization of AGB and extremely metal-poor stars.

Asteroseismic analysis of solar-like stars allows us to determine physical parameters such as stellar mass, with a higher precision compared to most other methods. Even in a well-studied cluster such as the Hyades, the masses of the red giant stars are not well known, and previous mass estimates are based on model calculations (isochrones). The four known red giants in the Hyades are assumed to be clump (core-helium-burning) stars based on their positions in colour-magnitude diagrams, however asteroseismology offers an opportunity to test this assumption. Using asteroseismic techniques combined with other methods, we aim to derive physical parameters and the evolutionary stage for the planet hosting star epsilon Tau, which is one of the four red giants located in the Hyades. We analysed time-series data from both ground and space to perform the asteroseismic analysis. By combining high signal-to-noise (S/N) radial-velocity data from the ground-based SONG network with continuous space-based data from the revised Kepler mission K2, we derive and characterize 27 individual oscillation modes for epsilon Tau, along with global oscillation parameters such as the large frequency separation and the ratio between the amplitude of the oscillations measured in radial velocity and intensity as a function of frequency. The latter has been measured previously for only two stars, the Sun and Procyon. Combining the seismic analysis with interferometric and spectroscopic measurements, we derive physical parameters for epsilon Tau, and discuss its evolutionary status.

1D stellar evolution codes employ rudimentary treatments of turbulent convection. For stars with convective envelopes, this leads to systematic errors in the predicted oscillation frequencies needed for asteroseismology. One way of mending these structural inadequacies is through patching, whereby the outermost layers of 1D models are replaced by the mean stratifications from 3D simulations. In order to viably implement this approach in asteroseismic analysis, interpolation throughout precomputed 3D envelopes is required. We present a method that interpolates throughout precomputed 3D envelopes as a function of effective temperature, surface gravity, and metallicity. We conduct a series of validation tests that demonstrate that the scheme reliably and accurately reproduces the structures of stellar envelopes and apply our method to the Sun as well as two stars observed by Kepler. We parameterize the frequency shift that results from patching and show that the functional forms are evolutionary dependent. In addition we find that neglecting modal effects, such as non-adiabatic energetics, introduces systematic errors in asteroseimically obtained stellar parameters. Both these results suggest that a cautious approach is necessary when utilizing empirical surface corrections in lieu of patching models. Our results have important implications, particularly for characterizing exoplanet systems, where accuracy is of utmost concern.

Measures of exoplanet bulk densities indicate that small exoplanets with radius less than 3 Earth radii ($R_\oplus$) range from low-density sub-Neptunes containing volatile elements to higher density rocky planets with Earth-like or iron-rich (Mercury-like) compositions. Such astonishing diversity in observed small exoplanet compositions may be the product of different initial conditions of the planet-formation process and/or different evolutionary paths that altered the planetary properties after formation. Planet evolution may be especially affected by either photoevaporative mass loss induced by high stellar X-ray and extreme ultraviolet (XUV) flux or giant impacts. Although there is some evidence for the former, there are no unambiguous findings so far about the occurrence of giant impacts in an exoplanet system. Here, we characterize the two innermost planets of the compact and near-resonant system Kepler-107. We show that they have nearly identical radii (about $1.5-1.6~R_\oplus$), but the outer planet Kepler-107c is more than twice as dense (about $12.6~\rm g\,cm^{-3}$) as the innermost Kepler-107b (about $5.3~\rm g\,cm^{-3}$). In consequence, Kepler-107c must have a larger iron core fraction than Kepler-107b. This imbalance cannot be explained by the stellar XUV irradiation, which would conversely make the more-irradiated and less-massive planet Kepler-107b denser than Kepler-107c. Instead, the dissimilar densities are consistent with a giant impact event on Kepler-107c that would have stripped off part of its silicate mantle. This hypothesis is supported by theoretical predictions from collisional mantle stripping, which match the mass and radius of Kepler-107c.

We present the target list of solar-type stars to be observed in short-cadence (2-min) for asteroseismology by the NASA Transiting Exoplanet Survey Satellite (TESS) during its 2-year nominal survey mission. The solar-like Asteroseismic Target List (ATL) is comprised of bright, cool main-sequence and subgiant stars and forms part of the larger target list of the TESS Asteroseismic Science Consortium (TASC). The ATL uses Gaia DR2 and the Extended Hipparcos Compilation (XHIP) to derive fundamental stellar properties, calculate detection probabilities and produce a rank-ordered target list. We provide a detailed description of how the ATL was produced and calculate expected yields for solar-like oscillators based on the nominal photometric performance by TESS. We also provide publicly available source code which can be used to reproduce the ATL, thereby enabling comparisons of asteroseismic results from TESS with predictions from synthetic stellar populations.

Precise stellar ages from asteroseismology have become available and can help setting stronger constraints on the evolution of the Galactic disc components. Recently, asteroseismology has confirmed a clear age difference in the solar annulus between two distinct sequences in the [$\alpha$/Fe] versus [Fe/H] abundance ratios relation: the high-$\alpha$ and low-$\alpha$ stellar populations. We aim at reproducing these new data with chemical evolution models including different assumptions for the history and number of accretion events. We tested two different approaches: a revised version of the `two-infall' model where the high-$\alpha$ phase forms by a fast gas accretion episode and the low-$\alpha$ sequence follows later from a slower gas infall rate, and the parallel formation scenario where the two disc sequences form coevally and independently. The revised `two-infall' model including uncertainties in age and metallicity is capable of reproducing: i) the [$\alpha$/Fe] vs. [Fe/H] abundance relation at different Galactic epochs, ii) the age$-$metallicity relation and the time evolution [$\alpha$/Fe]; iii) the age distribution of the high-$\alpha$ and low-$\alpha$ stellar populations, iv) the metallicity distribution function. The parallel approach is not capable of properly reproduce the stellar age distribution, in particular at old ages. In conclusion, the best chemical evolution model is the revised `two-infall' one, where a consistent delay of $\sim$4.3 Gyr in the beginning of the second gas accretion episode is a crucial assumption to reproduce stellar abundances and ages.

A spectroscopic analysis of stellar spectra can be carried out using different approaches; different methods, line lists, atomic parameters, solar abundances etc. The resulting atmospheric parameters from these choices can vary beyond quoted uncertainties in the literature. Here we characterize these differences by systematically comparing some of the commonly adopted ingredients; line lists, equivalent width measurements and atomic parameters. High resolution and high signal-to-noise spectroscopic data of one helium-core-burning red giant star in each of the three open clusters, NGC6819, M67 and NGC188 have been obtained with the FIES spectrograph at the Nordic Optical Telescope. The M67 target has been used to benchmark the analysis, as it is a well studied cluster with asteroseismic data from the K2 mission. For the other two clusters we have obtained higher quality data than previously analyzed, which allows us to establish their chemical composition more securely. Using a line by line analysis, we tested several different combinations of line lists and programs to measure equivalent widths of absorption lines to characterize systematic differences within the same spectroscopic method. The obtained parameters for the benchmark star in M67 vary up to ~170 K in T_eff, ~0.4 dex in log g and ~0.25 dex in [Fe/H] between the tested setups. Using the combination of equivalent width measurement program and line list that best reproduce the inferred log g from asteroseismology, we determined the atmospheric parameters for the three stars and securely established the chemical composition of NGC6819 to be ~solar, [Fe/H]=-0.02+-0.01 dex. We have highlighted the significantly different results obtained with different combinations of line lists, programs and atomic parameters, which emphasize the importance of benchmark stars studied with several different methods to anchor spectroscopic analyses.

The structural stratification of a solar-type main sequence star primarily depends on its mass and chemical composition. The surface heavy element abundances of the solar-type stars are reasonably well determined using conventional spectroscopy, however the second most abundant element helium is not. This is due to the fact that the envelope temperature of such stars is not high enough to excite helium. Since the helium abundance of a star affects its structure and subsequent evolution, the uncertainty in the helium abundance of a star makes estimates of its global properties (mass, radius, age etc.) uncertain as well. The detections of the signatures of the acoustic glitches from the precisely measured stellar oscillation frequencies provide an indirect way to estimate the envelope helium content. We use the glitch signature caused by the ionization of helium to determine the envelope helium abundance of 38 stars in the {\it Kepler} seismic LEGACY sample. Our results confirm that atomic diffusion does indeed take place in solar-type stars. We use the measured surface abundances in combination with the settling predicted by the stellar models to determine the initial abundances. The initial helium and metal mass fractions have subsequently been used to get the preliminary estimates of the primordial helium abundance, $Y_p = 0.244\pm0.019$, and the galactic enrichment ratio, $\Delta Y / \Delta Z = 1.226\pm0.849$. Although the current estimates have large errorbars due to the limited sample size, this method holds great promises to determine these parameters precisely in the era of upcoming space missions.

We determine the orbital eccentricities of individual small Kepler planets, through a combination of asteroseismology and transit light-curve analysis. We are able to constrain the eccentricities of 51 systems with a single transiting planet, which supplement our previous measurements of 66 planets in multi-planet systems. Through a Bayesian hierarchical analysis, we find evidence that systems with only one detected transiting planet have a different eccentricity distribution than systems with multiple detected transiting planets. The eccentricity distribution of the single-transiting systems is well described by the positive half of a zero-mean Gaussian distribution with a dispersion $\sigma_e = 0.32 \pm 0.06$, while the multiple-transit systems are consistent with $\sigma_e = 0.083^{+0.015}_{-0.020}$. A mixture model suggests a fraction of $0.76^{+0.21}_{-0.12}$ of single-transiting systems have a moderate eccentricity, represented by a Rayleigh distribution that peaks at $0.26^{+0.04}_{-0.06}$. This finding may reflect differences in the formation pathways of systems with different numbers of transiting planets. We investigate the possibility that eccentricities are "self-excited" in closely packed planetary systems, as well as the influence of long-period giant companion planets. We find that both mechanisms can qualitatively explain the observations. We do not find any evidence for a correlation between eccentricity and stellar metallicity, as has been seen for giant planets. Neither do we find any evidence that orbital eccentricity is linked to the detection of a companion star. Along with this paper we make available all of the parameters and uncertainties in the eccentricity distributions, as well as the properties of individual systems, for use in future studies.

Precise stellar masses and radii can be determined using asteroseismology, but their accuracy must be tested against independent estimates. Using radii derived from Gaia DR2 parallaxes, we test the accuracy of asteroseismic radii for a sample of 93 dwarfs based on both individual frequency fitting and the seismic scaling relations. Radii from frequency fitting are about 1 per cent smaller than Gaia radii on average; however, this difference may be explained by a negative bias of 30 $\mu$as in the Gaia parallaxes. This indicates that the radii derived from frequency fitting are accurate to within 1 per cent. The scaling relations are found to overestimate radii by more than 5 per cent, compared to the Gaia radii, at the highest temperatures. We demonstrate that this offset is reduced to 3 per cent after applying corrections based on model frequencies to the scaling relation for $\Delta\nu$, but only when the model frequencies are corrected for the surface effect. With corrections to $\Delta\nu$, the scaling relation gives radii accurate to about 2--3 per cent for dwarfs in the temperature range $5400$--$6700$ K. The remaining offset at the highest temperatures may indicate the need for a correction to the scaling relation for $\nu_{\mathrm{max}}$.

Standard 1D stellar evolution models do not correctly reproduce the structure of the outermost layers of stars with convective envelopes. This has been a long-standing problem in stellar modelling affecting both the predicted evolutionary paths and the attributed oscillation frequencies, and indirectly biasing numerous quantities derived from stellar evolution calculations. We present a novel method that mostly eliminates these structural defects by appending mean 3D simulations of stellar envelopes. In contrast to previous attempts we impose the complete structure derived from 3D simulations at each time step during the entire evolution. For this purpose, we interpolate in grids of pre-computed 3D simulations and use the resulting structure as boundary conditions, in order to solve the stellar structure equations for the 1D interior at each time step. Our method provides a continuous transition in many quantities from the interior to the imposed interpolated 3D surface layers. We present a solar calibration model and show that the obtained structure of the surface layers reliably mimics that of the underlying 3D simulations for the present Sun. Moreover, we perform a helioseismic analysis, showing that our method mostly eliminates the structural contribution to the discrepancy between model frequencies and observed p-mode frequencies.

Stellar evolution codes play a major role in present-day astrophysics, yet they share common simplifications related to the outer layers of stars. We seek to improve on this by the use of results from realistic and highly detailed 3D hydrodynamics simulations of stellar convection. We implement a temperature stratification extracted directly from the 3D simulations into two stellar evolution codes to replace the simplified atmosphere normally used. Our implementation also contains a non-constant mixing-length parameter, which varies as a function of the stellar surface gravity and temperature -- also derived from the 3D simulations. We give a detailed account of our fully consistent implementation and compare to earlier works, and also provide a freely available MESA-module. The evolution of low-mass stars with different masses is investigated, and we present for the first time an asteroseismic analysis of a standard solar model utilising calibrated convection and temperature stratification from 3D simulations. We show that the inclusion of 3D results have an almost insignificant impact on the evolution and structure of stellar models -- the largest effect are changes in effective temperature of order 30 K seen in the pre-main sequence and in the red-giant branch. However, this work provides the first step for producing self-consistent evolutionary calculations using fully incorporated 3D atmospheres from on-the-fly interpolation in grids of simulations.

It has been demonstrated that the time variability of a star's brightness at different frequencies can be used to infer its surface gravity, radius, mass, and age. With large samples of light curves now available from Kepler and K2, and upcoming surveys like TESS, we wish to quantify the overall information content of this data and identify where the information resides. As a first look into this question we ask which stellar parameters we can predict from the brightness variations in red-giant stars data and to what precision, using a data-driven model. We demonstrate that the long-cadence (30-minute) Kepler light curves for 2000 red-giant stars can be used to predict their $T_{\rm eff}$ and $\log g$. Our inference makes use of a data-driven model of a part of the autocorrelation function (ACF) of the light curve, where we posit a polynomial relationship between stellar parameters and the ACF pixel values. We find that this model, trained using 1000 stars, can be used to recover the temperature $T_{\rm eff}$ to $<$100 K, the surface gravity to $<$ 0.1 dex, and the asteroseismic power-spectrum parameters $\rm \nu_{max}$ and $\rm \Delta{\nu}$ to $<11$ $\mu$Hz and $<0.9$ $\mu$Hz ($\lesssim$ 15\%). We recover $T_{\rm eff}$ from range of time-lags 0.045 $<$ $T_{\rm lag}$ $<$ 370 days and the $\log g$, $\rm \nu_{max}$ and $\rm \Delta{\nu}$ from the range 0.045 $<$ $T_{\rm lag}$ $<$ 35 days. We do not discover any information about stellar metallicity. The information content of the data about each parameter is empirically quantified using this method, enabling comparisons to theoretical expectations about convective granulation.

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since July 2014. This paper describes the second data release from this phase, and the fourteenth from SDSS overall (making this, Data Release Fourteen or DR14). This release makes public data taken by SDSS-IV in its first two years of operation (July 2014-2016). Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey (eBOSS); the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data driven machine learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS website (www.sdss.org) has been updated for this release, and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020, and will be followed by SDSS-V.

We report the discovery and characterization of HD 89345b (K2-234b; EPIC 248777106b), a Saturn-sized planet orbiting a slightly evolved star. HD 89345 is a bright star ($V = 9.3$ mag) observed by the K2 mission with one-minute time sampling. It exhibits solar-like oscillations. We conducted asteroseismology to determine the parameters of the star, finding the mass and radius to be $1.12^{+0.04}_{-0.01}~M_\odot$ and $1.657^{+0.020}_{-0.004}~R_\odot$, respectively. The star appears to have recently left the main sequence, based on the inferred age, $9.4^{+0.4}_{-1.3}~\mathrm{Gyr}$, and the non-detection of mixed modes. The star hosts a "warm Saturn" ($P = 11.8$~days, $R_p = 6.86 \pm 0.14~R_\oplus$). Radial-velocity follow-up observations performed with the FIES, HARPS, and HARPS-N spectrographs show that the planet has a mass of $35.7 \pm 3.3~M_\oplus$. The data also show that the planet's orbit is eccentric ($e\approx 0.2$). An investigation of the rotational splitting of the oscillation frequencies of the star yields no conclusive evidence on the stellar inclination angle. We further obtained Rossiter-McLaughlin observations, which result in a broad posterior of the stellar obliquity. The planet seems to conform to the same patterns that have been observed for other sub-Saturns regarding planet mass and multiplicity, orbital eccentricity, and stellar metallicity.

We present a catalog of stellar properties for a large sample of 6676 evolved stars with APOGEE spectroscopic parameters and \textit{Kepler} asteroseismic data analyzed using five independent techniques. Our data includes evolutionary state, surface gravity, mean density, mass, radius, age, and the spectroscopic and asteroseismic measurements used to derive them. We employ a new empirical approach for combining asteroseismic measurements from different methods, calibrating the inferred stellar parameters, and estimating uncertainties. With high statistical significance, we find that asteroseismic parameters inferred from the different pipelines have systematic offsets that are not removed by accounting for differences in their solar reference values. We include theoretically motivated corrections to the large frequency spacing ($\Delta \nu$) scaling relation, and we calibrate the zero point of the frequency of maximum power ($\nu_{\rm max}$) relation to be consistent with masses and radii for members of star clusters. For most targets, the parameters returned by different pipelines are in much better agreement than would be expected from the pipeline-predicted random errors, but 22\% of them had at least one method not return a result and a much larger measurement dispersion. This supports the usage of multiple analysis techniques for asteroseismic stellar population studies. The measured dispersion in mass estimates for fundamental calibrators is consistent with our error model, which yields median random and systematic mass uncertainties for RGB stars of order 4\%. Median random and systematic mass uncertainties are at the 9\% and 8\% level respectively for RC stars.

Debate over the planet occurrence rates around intermediate-mass stars has hinged on the accurate determination of masses of evolved stars, and has been exacerbated by a paucity of reliable, directly-measured fundamental properties for these stars. We present long-baseline optical interferometry of five evolved intermediate-mass ($\sim\,1.5\,\mathrm{M}_\odot$) planet-hosting stars using the PAVO beam combiner at the CHARA Array, which we combine with bolometric flux measurements and parallaxes to determine their radii and effective temperatures. We measured the radii and effective temperatures of 6 Lyncis ($5.12\pm0.16\,\mathrm{R}_\odot$, $4949\pm58\,\mathrm{K}$), 24 Sextantis ($5.49\pm0.18\,\mathrm{R}_\odot$, $4908\pm65\,\mathrm{K}$), $\kappa$ Coronae Borealis ($4.77\pm0.07\,\mathrm{R}_\odot$, $4870\pm47\,\mathrm{K}$), HR 6817 ($4.45\pm0.08\,\mathrm{R}_\odot$, $5013\pm59\,\mathrm{K}$), and HR 8641 ($4.91\pm0.12\,\mathrm{R}_\odot$, $4950\pm68\,\mathrm{K}$). We find disagreements of typically 15 per cent in angular diameter and $\sim$200 K in temperature compared to interferometric measurements in the literature, yet good agreement with spectroscopic and photometric temperatures, concluding that the previous interferometric measurements may have been affected by systematic errors exceeding their formal uncertainties. Modelling based on BaSTI isochrones using various sets of asteroseismic, spectroscopic, and interferometric constraints tends to favour slightly ($\sim$15 per cent) lower masses than generally reported in the literature.

The last decade has seen a revolution in the field of asteroseismology - the study of stellar pulsations. It has become a powerful method to precisely characterise exoplanet host stars, and as a consequence also the exoplanets themselves. This synergy between asteroseismology and exoplanet science has flourished in large part due to space missions such as $\textit{Kepler}$, which have provided high-quality data that can be used for both types of studies. Perhaps the primary contribution from asteroseismology to the research on transiting exoplanets is the determination of very precise stellar radii that translate into precise planetary radii, but asteroseismology has also proven useful in constraining eccentricities of exoplanets as well as the dynamical architecture of planetary systems. In this contribution, we introduce some basic principles of asteroseismology and review current synergies between the two fields.

Age is an important characteristic of a planetary system, but also one that is difficult to determine. Assuming that the host star and the planets are formed at the same time, the challenge is to determine the stellar age. Asteroseismology provides precise age determination, but in many cases the required detailed pulsation observations are not available. Here we concentrate on other techniques, which may have broader applicability but also serious limitations. Further development of this area requires improvements in our understanding of the evolution of stars and their age-dependent characteristics, combined with observations that allow reliable calibration of the various techniques.

We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching four years of Kepler time series photometry (Data Release 25, Q1-Q17). The catalog contains 8054 KOIs of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new and include two in multi-planet systems (KOI-82.06 and KOI-2926.05), and ten high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter which automatically vets the DR25 Threshold Crossing Events (TCEs, Twicken et al. 2016). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discusses the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive.

We present an updated release of the BaSTI (a Bag of Stellar Tracks and Isochrones) stellar model and isochrone library for a solar scaled heavy element distribution. The main input physics changed from the previous BaSTI release include the solar metal mixture, electron conduction opacities, a few nuclear reaction rates, bolometric corrections, and the treatment of the overshooting efficiency for shrinking convective cores. The new model calculations cover a mass range between 0.1 and 15 Msun, 22 initial chemical compositions between [Fe/H]=-3.20 and +0.45, with helium to metal enrichment ratio dY /dZ=1.31. The isochrones cover an age range between 20 Myr and 14.5 Gyr, take consistently into account the pre-main sequence phase, and have been translated to a large number of popular photometric systems. Asteroseismic properties of the theoretical models have also been calculated. We compare our isochrones with results from independent databases and with several sets of observations, to test the accuracy of the calculations. All stellar evolution tracks, asteroseismic properties and isochrones are made available through a dedicated Web site.

We test asteroseismic radii of Kepler main-sequence and subgiant stars by deriving their parallaxes which are compared with those of the first Gaia data release. We compute radii based on the asteroseismic scaling relations as well as by fitting observed oscillation frequencies to stellar models for a subset of the sample, and test the impact of using effective temperatures from either spectroscopy or the infrared flux method. An offset of 3%, showing no dependency on any stellar parameters, is found between seismic parallaxes derived from frequency modelling and those from Gaia. For parallaxes based on radii from the scaling relations, a smaller offset is found on average; however, the offset becomes temperature dependent which we interpret as problems with the scaling relations at high stellar temperatures. Using the hotter infrared flux method temperature scale, there is no indication that radii from the scaling relations are inaccurate by more than about 5%. Taking the radii and masses from the modelling of individual frequencies as reference values, we seek to correct the scaling relations for the observed temperature trend. This analysis indicates that the scaling relations systematically overestimate radii and masses at high temperatures, and that they are accurate to within 5% in radius and 13% in mass for main-sequence stars with temperatures below 6400 K. However, further analysis is required to test the validity of the corrections on a star-by-star basis and for more evolved stars.

We present the discovery of KELT-21b, a hot Jupiter transiting the $V=10.5$ A8V star HD 332124. The planet has an orbital period of $P=3.6127647\pm0.0000033$ days and a radius of $1.586_{-0.040}^{+0.039}$ $R_J$. We set an upper limit on the planetary mass of $M_P<3.91$ $M_J$ at $3\sigma$ confidence. We confirmed the planetary nature of the transiting companion using this mass limit and Doppler tomographic observations to verify that the companion transits HD 332124. These data also demonstrate that the planetary orbit is well-aligned with the stellar spin, with a sky-projected spin-orbit misalignment of $\lambda=-5.6_{-1.9}^{+1.7 \circ}$. The star has $T_{\mathrm{eff}}=7598_{-84}^{+81}$ K, $M_*=1.458_{-0.028}^{+0.029}$ $M_{\odot}$, $R_*=1.638\pm0.034$ $R_{\odot}$, and $v\sin I_*=146$ km s$^{-1}$, the highest projected rotation velocity of any star known to host a transiting hot Jupiter. The star also appears to be somewhat metal-poor and $\alpha$-enhanced, with [Fe/H]$=-0.405_{-0.033}^{+0.032}$ and [$\alpha$/Fe]$=0.145 \pm 0.053$; these abundances are unusual, but not extraordinary, for a young star with thin-disk kinematics like KELT-21. High-resolution imaging observations revealed the presence of a pair of stellar companions to KELT-21, located at a separation of 1.2" and with a combined contrast of $\Delta K_S=6.39 \pm 0.06$ with respect to the primary. Although these companions are most likely physically associated with KELT-21, we cannot confirm this with our current data. If associated, the candidate companions KELT-21 B and C would each have masses of $\sim0.12$ $M_{\odot}$, a projected mutual separation of $\sim20$ AU, and a projected separation of $\sim500$ AU from KELT-21. KELT-21b may be one of only a handful of known transiting planets in hierarchical triple stellar systems.

Investigations of the origin and evolution of the Milky Way disk have long relied on chemical and kinematic identification of its components to reconstruct our Galactic past. Difficulties in determining precise stellar ages have restricted most studies to small samples, normally confined to the solar neighbourhood. Here we break this impasse with the help of asteroseismic inference and perform a chronology of the evolution of the disk throughout the age of the Galaxy. We chemically dissect the Milky Way disk population using a sample of red giant stars spanning out to 2~kpc in the solar annulus observed by the {\it Kepler} satellite, with the added dimension of asteroseismic ages. Our results reveal a clear difference in age between the low- and high-$\alpha$ populations, which also show distinct velocity dispersions in the $V$ and $W$ components. We find no tight correlation between age and metallicity nor [$\alpha$/Fe] for the high-$\alpha$ disk stars. Our results indicate that this component formed over a period of more than 2~Gyr with a wide range of [M/H] and [$\alpha$/Fe] independent of time. Our findings show that the kinematic properties of young $\alpha$-rich stars are consistent with the rest of the high-$\alpha$ population and different from the low-$\alpha$ stars of similar age, rendering support to their origin being old stars that went through a mass transfer or stellar merger event, making them appear younger, instead of migration of truly young stars formed close to the Galactic bar.

In this chapter I give an overall description of the structure and evolution of stars of different masses, and review the main ingredients included in state-of-the-art calculations aiming at reproducing observational features. I give particular emphasis to processes where large uncertainties still exist as they have strong impact on stellar properties derived from large compilations of tracks and isochrones, and are therefore of fundamental importance in many fields of astrophysics.

(Abridged) We present the first APOKASC catalog of spectroscopic and asteroseismic data for 415 dwarfs and subgiants. Asteroseismic data have been obtained by Kepler in short cadence. The spectroscopic parameters are based on spectra taken as part of APOGEE and correspond to DR13 of SDSS. We analyze our data using two Teff scales, the spectroscopic values from DR13 and those derived from SDSS griz photometry. We use the differences in our results arising from these choices as a test of systematic Teff, and find that they can lead to significant differences in the derived stellar properties. Determinations of surface gravity ($\log{g}$), mean density ($\rho$), radius ($R$), mass ($M$), and age ($\tau$) for the whole sample have been carried out with stellar grid-based modeling. We have assessed random and systematic error sources in the spectroscopic and seismic data, as well as in the grid-based modeling determination of the stellar quantities in the catalog. We provide stellar properties for both Teff scales. The median combined (random and systematic) uncertainties are 2% (0.01 dex; $\log{g}$), 3.4% ($\rho$), 2.6% ($R$), 5.1% ($M$), and 19% ($\tau$) for the photometric Teff scale and 2% ($\log{g}$), 3.5% ($\rho$), 2.7% ($R$), 6.3% ($M$), and 23% ($\tau$) for the spectroscopic scale. Comparisons with stellar quantities in the catalog by Chaplin et al.(2014) highlight the importance of metallicity measurements for determining stellar parameters accurately. We compare our results with those from other sources, including stellar radii determined from TGAS parallaxes and asteroseismic analyses based on individual frequencies. We find a very good agreement in all cases. Comparisons give strong support to the determination of stellar quantities based on global seismology, a relevant result for future missions such as TESS and PLATO. Table 5 corrected (wrongly listed SDSS Teff before).

HARPS-N spectra with S/N > 250 and MARCS model atmospheres were used to derive abundances of C, O, Na, Mg, Al, Si, Ca, Ti, Cr, Fe, Ni, Zn, and Y in ten stars from the Kepler LEGACY sample (including the binary pair 16 Cyg A and B) selected to have metallicities in the range -0.15 < [Fe/H] < +0.15 and ages between 1 and 7 Gyr. Stellar gravities were obtained from seismic data and effective temperatures were determined by comparing non-LTE iron abundances derived from FeI and FeII lines. Available non-LTE corrections were also applied when deriving abundances of the other elements. The results support the [X/Fe]-age relations previously found for solar twins. [Mg/Fe], [Al/Fe], and [Zn/Fe] decrease by ~0.1 dex over the lifetime of the Galactic thin disk due to delayed contribution of iron from Type Ia supernovae relative to prompt production of Mg, Al, and Zn in Type II supernovae. [Y/Mg] and [Y/Al], on the other hand, increase by ~0.3 dex, which can be explained by an increasing contribution of s-process elements from low-mass AGB stars as time goes on. The trends of [C/Fe] and [O/Fe] are more complicated due to variations of the ratio between refractory and volatile elements among stars of similar age. Two stars with about the same age as the Sun show very different trends of [X/H] as a function of elemental condensation temperature Tc and for 16 Cyg, the two components have an abundance difference, which increases with Tc. These anomalies may be connected to planet-star interactions.

The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) began observations in July 2014. It pursues three core programs: APOGEE-2, MaNGA, and eBOSS. In addition, eBOSS contains two major subprograms: TDSS and SPIDERS. This paper describes the first data release from SDSS-IV, Data Release 13 (DR13), which contains new data, reanalysis of existing data sets and, like all SDSS data releases, is inclusive of previously released data. DR13 makes publicly available 1390 spatially resolved integral field unit observations of nearby galaxies from MaNGA, the first data released from this survey. It includes new observations from eBOSS, completing SEQUELS. In addition to targeting galaxies and quasars, SEQUELS also targeted variability-selected objects from TDSS and X-ray selected objects from SPIDERS. DR13 includes new reductions of the SDSS-III BOSS data, improving the spectrophotometric calibration and redshift classification. DR13 releases new reductions of the APOGEE-1 data from SDSS-III, with abundances of elements not previously included and improved stellar parameters for dwarf stars and cooler stars. For the SDSS imaging data, DR13 provides new, more robust and precise photometric calibrations. Several value-added catalogs are being released in tandem with DR13, in particular target catalogs relevant for eBOSS, TDSS, and SPIDERS, and an updated red-clump catalog for APOGEE. This paper describes the location and format of the data now publicly available, as well as providing references to the important technical papers that describe the targeting, observing, and data reduction. The SDSS website, http://www.sdss.org, provides links to the data, tutorials and examples of data access, and extensive documentation of the reduction and analysis procedures. DR13 is the first of a scheduled set that will contain new data and analyses from the planned ~6-year operations of SDSS-IV.

We present a new method for replacing the outermost layers of stellar models with interpolated atmospheres based on results from 3D simulations, in order to correct for structural inadequacies of these layers. This replacement is known as patching. Tests, based on 3D atmospheres from three different codes and interior models with different input physics, are performed. Using solar models, we investigate how different patching criteria affect the eigenfrequencies. These criteria include the depth, at which the replacement is performed, the quantity, on which the replacement is based, and the mismatch in $T_\mathrm{eff}$ and $\log g$ between the un-patched model and patched 3D atmosphere. We find the eigenfrequencies to be unaltered by the patching depth deep within the adiabatic region, while changing the patching quantity or the employed atmosphere grid leads to frequency shifts that may exceed $1\,\mu\mathrm{Hz}$. Likewise, the eigenfrequencies are sensitive to mismatches in $T_\mathrm{eff}$ or $\log g$. A thorough investigation of the accuracy of a new scheme, for interpolating mean 3D stratifications within the atmosphere grids, is furthermore performed. Throughout large parts of the atmosphere grids, our interpolation scheme yields sufficiently accurate results for the purpose of asteroseismology. We apply our procedure in asteroseismic analyses of four \textit{Kepler} stars and draw the same conclusions as in the solar case: Correcting for structural deficiencies lowers the eigenfrequencies, this correction is slightly sensitive to the patching criteria, and the remaining frequency discrepancy between models and observations is less frequency-dependent. Our work shows the applicability and relevance of patching in asteroseismology.

The most powerful tests of stellar models come from the brightest stars in the sky, for which complementary techniques, such as astrometry, asteroseismology, spectroscopy, and interferometry can be combined. The K2 Mission is providing a unique opportunity to obtain high-precision photometric time series for bright stars along the ecliptic. However, bright targets require a large number of pixels to capture the entirety of the stellar flux, and bandwidth restrictions limit the number and brightness of stars that can be observed. To overcome this, we have developed a new photometric technique, that we call halo photometry, to observe very bright stars using a limited number of pixels. Halo photometry is simple, fast and does not require extensive pixel allocation, and will allow us to use K2 and other photometric missions, such as TESS, to observe very bright stars for asteroseismology and to search for transiting exoplanets. We apply this method to the seven brightest stars in the Pleiades open cluster. Each star exhibits variability; six of the stars show what are most-likely slowly pulsating B-star (SPB) pulsations, with amplitudes ranging from 20 to 2000 ppm. For the star Maia, we demonstrate the utility of combining K2 photometry with spectroscopy and interferometry to show that it is not a 'Maia variable', and to establish that its variability is caused by rotational modulation of a large chemical spot on a 10 d time scale.

Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science.

Stars with convective envelopes display magnetic activity, which decreases over time due to the magnetic braking of the star. This age-dependence of magnetic activity is well-studied for younger stars, but the nature of this dependence for older stars is not well understood. This is mainly because absolute stellar ages for older stars are hard to measure. However, relatively accurate stellar ages have recently come into reach through asteroseismology. In this work we present X-ray luminosities, which are a measure for magnetic activity displayed by the stellar coronae, for 24 stars with well-determined ages older than a gigayear. We find 14 stars with detectable X-ray luminosities and use these to calibrate the age-activity relationship. We find a relationship between stellar X-ray luminosity, normalized by stellar surface area, and age that is steeper than the relationships found for younger stars, with an exponent of $-2.80 \pm 0.72$. Previous studies have found values for the exponent of the age-activity relationship ranging between -1.09 to -1.40, dependent on spectral type, for younger stars. Given that there are recent reports of a flattening relationship between age and rotational period for old cool stars, one possible explanation is that we witness a strong steepening of the relationship between activity and rotation.

We present a comparison of parallaxes and radii from asteroseismology and Gaia DR1 (TGAS) for 2200 Kepler stars spanning from the main sequence to the red giant branch. We show that previously identified offsets between TGAS parallaxes and distances derived from asteroseismology and eclipsing binaries have likely been overestimated for parallaxes <~ 5-10 mas (~ 90-98% of the TGAS sample). The observed differences in our sample can furthermore be partially compensated by adopting a hotter Teff scale (such as the infrared flux method) instead of spectroscopic temperatures for dwarfs and subgiants. Residual systematic differences are at the ~ 2% level in parallax across three orders of magnitude. We use TGAS parallaxes to empirically demonstrate that asteroseismic radii are accurate to ~ 5% or better for stars between ~ 0.8-8 Rsun. We find no significant offset for main-sequence (<~ 1.5 Rsun) and low-luminosity RGB stars (~ 3-8 Rsun), but seismic radii appear to be systematically underestimated by ~5% for subgiants (~ 1.5-3 Rsun). We find no systematic errors as a function of metallicity between [Fe/H] ~ -0.8 to +0.4 dex, and show tentative evidence that corrections to the scaling relation for the large frequency separation (Dnu) improve the agreement with TGAS for RGB stars. Finally, we demonstrate that beyond ~ 3 kpc asteroseismology will provide more precise distances than end-of-mission Gaia data, highlighting the synergy and complementary nature of Gaia and asteroseismology for studying galactic stellar populations.

Red clump stars are fundamental distance indicators in astrophysics, although theoretical stellar models predict a dependence of absolute magnitudes with ages. This effect is particularly strong below 2 Gyr, but even above this limit a mild age dependence is still expected. We use seismically identified red clump stars in the Kepler field for which we have reliable distances, masses and ages from the SAGA survey to first explore this effect. By excluding red clump stars with masses larger than 1.6 Msun (corresponding to ages younger than 2 Gyr), we derive robust calibrations linking intrinsic colors to absolute magnitudes in the following photometric systems: Str\"omgren $by$, Johnson $BV$, Sloan $griz$, 2MASS $JHK_s$ and WISE $W1W2W3$. With the precision achieved we also detect a slope of absolute magnitudes 0.020(0.003) mag per Gyrin the infrared, implying that distance calibrations of clump stars can be off by up to 0.2 mag in the infrared (over the range from 2 Gyr to 12 Gyr) if their ages are unknown. Even larger uncertainties affect optical bands, because of the stronger interdependency of absolute magnitudes on colors and age. Our distance calibrations are ultimately based on asteroseismology, and we show how the distance scale can be used to test the accuracy of seismic scaling relations. Within the uncertainties our calibrations are in agreement with those built upon local red clump with Hipparcos} parallaxes, although we find a tension which if confirmed would imply that scaling relations overestimate radii of red clump stars by 2(+-20%. Data-releases post Gaia DR1 will provide an important testbed for our results.

In the updated APOGEE-Kepler catalog, we have asteroseismic and spectroscopic data for over 3000 first ascent red giants. Given the size and accuracy of this sample, these data offer an unprecedented test of the accuracy of stellar models on the post-main-sequence. When we compare these data to theoretical predictions, we find a metallicity dependent temperature offset with a slope of around 100 K per dex in metallicity. We find that this effect is present in all model grids tested and that theoretical uncertainties in the models, correlated spectroscopic errors, and shifts in the asteroseismic mass scale are insufficient to explain this effect. Stellar models can be brought into agreement with the data if a metallicity dependent convective mixing length is used, with $ \Delta\alpha_{\rm ML, YREC} \sim 0.2$ per dex in metallicity, a trend inconsistent with the predictions of three dimensional stellar convection simulations. If this effect is not taken into account, isochrone ages for red giants from the Gaia data will be off by as much as a factor of 2 even at modest deviations from solar metallicity ([Fe/H]=$-$0.5).

Using data from the NASA spacecraft Kepler, we study solar-like oscillations in red-giant stars in the open cluster NGC6811. We determine oscillation frequencies, frequency separations, period spacings of mixed modes and mode visibilities for eight cluster giants. The oscillation parameters show that these stars are helium-core-burning red giants. The eight stars form two groups with very different oscillation power spectra; the four stars with lowest Delta_nu-values display rich sets of mixed l=1 modes, while this is not the case for the four stars with higher Delta_nu. For the four stars with lowest Delta_nu, we determine the asymptotic period spacing of the mixed modes, DeltaP, which together with the masses we derive for all eight stars suggest that they belong to the so-called secondary clump. Based on the global oscillation parameters, we present initial theoretical stellar modeling which indicate that we can constrain convective-core overshoot on the main sequence and in the helium-burning phase for these ~2M_sun stars. Finally, our results indicate less mode suppression than predicted by recent theories for magnetic suppression of certain oscillation modes in red giants.

We report here on our search for excess power in photometry of Neptune collected by the K2 mission that may be due to intrinsic global oscillations of the planet Neptune. To conduct this search, we developed new methods to correct for instrumental effects such as intrapixel variability and gain variations. We then extracted and analyzed the time-series photometry of Neptune from 49 days of nearly continuous broadband photometry of the planet. We find no evidence of global oscillations and place an upper limit of $\sim$5 ppm at 1000 \uhz\ for the detection of a coherent signal. With an observed cadence of 1-minute and point-to-point scatter less than 0.01\%, the photometric signal is dominated by reflected light from the Sun, which is in turn modulated by atmospheric variability of Neptune at the 2\% level. A change in flux is also observed due to the increasing distance between Neptune and the K2 spacecraft, and solar variability with convection-driven solar p modes present.

Acoustic glitches are regions inside a star where the sound speed or its derivatives change abruptly. These leave a small characteristic oscillatory signature in the stellar oscillation frequencies. With the precision achieved by {\it Kepler} seismic data, it is now possible to extract these small amplitude oscillatory signatures, and infer the locations of the glitches. We perform glitch analysis for all the 66 stars in the {\it Kepler} seismic LEGACY sample to derive the locations of the base of the envelope convection zone and the helium ionization zone. The signature from helium ionization zone is found to be robust for all stars in the sample, whereas the convection zone signature is found to be weak and problematic, particularly for relatively massive stars with large errorbars on the oscillation frequencies. We demonstrate that the helium glitch signature can be used to constrain the properties of the helium ionization layers and the helium abundance.

We report the first asteroseismic results obtained with the Hertzsprung SONG Telescope from an extensive high-precision radial-velocity observing campaign of the subgiant muHerculis. The data set was collected during 215 nights in 2014 and 2015. We detected a total of 49 oscillation modes with l values from 0 to 3, including some l = 1 mixed modes. Based on the rotational splitting observed in l = 1 modes, we determine a rotational period of 52 days and a stellar inclination angle of 63 degrees. The parameters obtained through modeling of the observed oscillation frequencies agree very well with independent observations and imply a stellar mass between 1.11 and 1.15M_sun and an age of 7.8+/-0.4 Gyr. Furthermore, the high-quality data allowed us to determine the acoustic depths of the He II ionization layer and the base of the convection zone.

Starting in December 2014, Kepler K2 observed Neptune continuously for 49 days at a 1-minute cadence. The goals consisted of studying its atmospheric dynamics (Simon et al. 2016), detecting its global acoustic oscillations (Rowe et al., submitted), and those of the Sun, which we report on here. We present the first indirect detection of solar oscillations in intensity measurements. Beyond the remarkable technical performance, it indicates how Kepler would see a star like the Sun. The result from the global asteroseismic approach, which consists of measuring the oscillation frequency at maximum amplitude "nu_max" and the mean frequency separation between mode overtones "Delta nu", is surprising as the nu_max measured from Neptune photometry is larger than the accepted value. Compared to the usual reference nu_max_sun = 3100 muHz, the asteroseismic scaling relations therefore make the solar mass and radius appear larger by 13.8 +/- 5.8 % and 4.3 +/- 1.9 % respectively. The higher nu_max is caused by a combination of the value of nu_max_sun, being larger at the time of observations than the usual reference from SOHO/VIRGO/SPM data (3160 +/- 10 muHz), and the noise level of the K2 time series, being ten times larger than VIRGO's. The peak-bagging method provides more consistent results: despite a low signal-to-noise ratio (SNR), we model ten overtones for degrees l=0,1,2. We compare the K2 data with simultaneous SOHO/VIRGO/SPM photometry and BiSON velocity measurements. The individual frequencies, widths, and amplitudes mostly match those from VIRGO and BiSON within 1 sigma, except for the few peaks with lowest SNR.

We use asteroseismic data from the Kepler satellite to determine fundamental stellar properties of the 66 main-sequence targets observed for at least one full year by the mission. We distributed tens of individual oscillation frequencies extracted from the time series of each star among seven modelling teams who applied different methods to determine radii, masses, and ages for all stars in the sample. Comparisons among the different results reveal a good level of agreement in all stellar properties, which is remarkable considering the variety of codes, input physics and analysis methods employed by the different teams. Average uncertainties are of the order of $\sim$2\% in radius, $\sim$4\% in mass, and $\sim$10\% in age, making this the best-characterised sample of main-sequence stars available to date. Our predicted initial abundances and mixing-length parameters are checked against inferences from chemical enrichment laws $\Delta Y / \Delta Z$ and predictions from 3D atmospheric simulations. We test the accuracy of the determined stellar properties by comparing them to the Sun, angular diameter measurements, Gaia parallaxes, and binary evolution, finding excellent agreement in all cases and further confirming the robustness of asteroseismically-determined physical parameters of stars when individual frequencies of oscillation are available. Baptised as the Kepler dwarfs LEGACY sample, these stars are the solar-like oscillators with the best asteroseismic properties available for at least another decade. All data used in this analysis and the resulting stellar parameters are made publicly available for the community.

The advent of space-based missions like $Kepler$ has revolutionized the study of solar-type stars, particularly through the measurement and modeling of their resonant modes of oscillation. Here we analyze a sample of 66 $Kepler$ main-sequence stars showing solar-like oscillations as part of the $Kepler$ seismic LEGACY project. We use $Kepler$ short-cadence data, of which each star has at least 12 months, to create frequency power spectra optimized for asteroseismology. For each star we identify its modes of oscillation and extract parameters such as frequency, amplitude, and line width using a Bayesian Markov chain Monte Carlo `peak-bagging' approach. We report the extracted mode parameters for all 66 stars, as well as derived quantities such as frequency difference ratios, the large and small separations $\Delta\nu$ and $\delta\nu_{02}$; the behavior of line widths with frequency and line widths at $\nu_{\rm max}$ with $T_{\rm eff}$, for which we derive parametrizations; and behavior of mode visibilities. These average properties can be applied in future peak-bagging exercises to better constrain the parameters of the stellar oscillation spectra. The frequencies and frequency ratios can tightly constrain the fundamental parameters of these solar-type stars, and mode line widths and amplitudes can test models of mode damping and excitation.

NASA's K2 mission is observing tens of thousands of stars along the ecliptic, providing data suitable for large scale asteroseismic analyses to inform galactic archaeology studies. Its first campaign covered a field near the north galactic cap, a region never covered before by large asteroseismic-ensemble investigations, and was therefore of particular interest for exploring this part of our Galaxy. Here we report the asteroseismic analysis of all stars selected by the K2 Galactic Archaeology Program during the mission's "North Galactic Cap" campaign 1. Our consolidated analysis uses six independent methods to measure the global seismic properties, in particular the large frequency separation, and the frequency of maximum power. From the full target sample of 8630 stars we find about 1200 oscillating red giants, a number comparable with estimates from galactic synthesis modeling. Thus, as a valuable by-product we find roughly 7500 stars to be dwarfs, which provide a sample well suited for galactic exoplanet occurrence studies because they originate from our simple and easily reproducible selection function. In addition, to facilitate the full potential of the data set for galactic archaeology we assess the detection completeness of our sample of oscillating red giants. We find the sample is at least near complete for stars with 40 < numax/microHz < 270, and numax_detec < 2.6*1e6 * 2e-Kp microHz. There is a detection bias against helium core burning stars with numax ~ 30 microHz, affecting the number of measurements of DeltaNu and possibly also numax. Although we can detect oscillations down to Kp = 15, our campaign 1 sample lacks enough faint giants to assess the detection completeness for stars fainter than Kp ~ 14.5.

Strongly irradiated giant planets are observed to have radii larger than thermal evolution models predict. Although these inflated planets have been known for over fifteen years, it is unclear whether their inflation is caused by deposition of energy from the host star, or inhibited cooling of the planet. These processes can be distinguished if the planet becomes highly irradiated only when the host star evolves onto the red giant branch. We report the discovery of K2-97b, a 1.31 $\pm$ 0.11 R$_\mathrm{J}$, 1.10 $\pm$ 0.11 M$_\mathrm{J}$ planet orbiting a 4.20 $\pm$ 0.14 R$_\odot$, 1.16 $\pm$ 0.12 M$_\odot$ red giant star with an orbital period of 8.4 days. We precisely constrained stellar and planetary parameters by combining asteroseismology, spectroscopy, and granulation noise modeling along with transit and radial velocity measurements. The uncertainty in planet radius is dominated by systematic differences in transit depth, which we measure to be up to 30% between different lightcurve reduction methods. Our calculations indicate the incident flux on this planet was 170$^{+140}_{-60}$ times the incident flux on Earth while the star was on the main sequence. Previous studies suggest that this incident flux is insufficient to delay planetary cooling enough to explain the present planet radius. This system thus provides the first evidence that planets may be inflated directly by incident stellar radiation rather than by delayed loss of heat from formation. Further studies of planets around red giant branch stars will confirm or contradict this hypothesis, and may reveal a new class of re-inflated planets.

Stellar evolution codes play a major role in present-day astrophysics, yet they share common issues. In this work we seek to remedy some of those by the use of results from realistic and highly detailed 3D hydrodynamical simulations of stellar atmospheres. We have implemented a new temperature stratification extracted directly from the 3D simulations into the Garching Stellar Evolution Code to replace the simplified atmosphere normally used. Secondly, we have implemented the use of a variable mixing-length parameter, which changes as a function of the stellar surface gravity and temperature -- also derived from the 3D simulations. Furthermore, to make our models consistent, we have calculated new opacity tables to match the atmospheric simulations. Here, we present the modified code and initial results on stellar evolution using it.

The physical parameters of the retired A star HD 185351 were analysed in great detail by Johnson et al. (2014) using interferometry, spectroscopy and asteroseismology. Results from all independent methods are consistent with HD 185351 having a mass in excess of $1.5\mathrm{M}_{\odot}$. However, the study also showed that not all observational constraints could be reconciled in stellar evolutionary models, leading to mass estimates ranging from $\sim 1.6-1.9\mathrm{M}_{\odot}$ and casting doubts on the accuracy of stellar properties determined from asteroseismology. Here we solve this discrepancy and construct a theoretical model in agreement with all observational constraints on the physical parameters of HD 185351. The effects of varying input physics are examined as well as considering the additional constraint of the observed g-mode period spacing. This quantity is found to be sensitive to the inclusion of additional mixing from the convective core during the main sequence, and can be used to calibrate the overshooting efficiency using low-luminosity red giant stars. A theoretical model with metallicity $\left[\mathrm{Fe/H}\right]=0.16$dex, mixing-length parameter $\alpha_{\mathrm{MLT}}=2.00$, and convective overshooting efficiency parameter $f=0.030$ is found to be in complete agreement with all observational constraints for a stellar mass of $M\simeq1.60\mathrm{M}_{\odot}$.

Observations of stellar clusters have had a tremendous impact in forming our understanding of stellar evolution. The open cluster M67 has a particularly important role as a calibration benchmark for stellar evolution theory due to its near solar composition and age. As a result, it has been observed extensively, including attempts to detect solar-like oscillations in its main sequence and red giant stars. However, any asteroseismic inference has so far remained elusive due to the difficulty in measuring these extremely low amplitude oscillations. Here we report the first unambiguous detection of solar-like oscillations in the red giants of M67. We use data from the Kepler ecliptic mission, K2, to measure the global asteroseismic properties. We find a model-independent seismic-informed distance of 816+/-11pc, or (m-M)o=9.57+/-0.03mag, an average red-giant mass of 1.36+/-0.01Msun, in agreement with the dynamical mass from an eclipsing binary near the cluster turn-off, and ages of individual stars compatible with isochrone fitting. We see no evidence of strong mass loss on the red giant branch. We also determine seismic log g of all the cluster giants with a typical precision of ~0.01dex. Our results generally show good agreement with independent methods and support the use of seismic scaling relations to determine global properties of red giant stars with near solar metallicity. We further illustrate that the data are of such high quality, that future work on individual mode frequencies should be possible, which would extend the scope of seismic analysis of this cluster.

Binary star systems are important for understanding stellar structure and evolution, and are especially useful when oscillations can be detected and analysed with asteroseismology. However, only four systems are known in which solar-like oscillations are detected in both components. Here, we analyse the fifth such system, HD 176465, which was observed by Kepler. We carefully analysed the system's power spectrum to measure individual mode frequencies, adapting our methods where necessary to accommodate the fact that both stars oscillate in a similar frequency range. We also modelled the two stars independently by fitting stellar models to the frequencies and complementary parameters. We are able to cleanly separate the oscillation modes in both systems. The stellar models produce compatible ages and initial compositions for the stars, as is expected from their common and contemporaneous origin. Combining the individual ages, the system is about 3.0$\pm$0.5 Gyr old. The two components of HD 176465 are young physically-similar oscillating solar analogues, the first such system to be found, and provide important constraints for stellar evolution and asteroseismology.

We present an asteroseismic analysis of 33 solar-type stars observed in short cadence during Campaigns (C) 1-3 of the NASA K2 mission. We were able to extract both average seismic parameters and individual mode frequencies for stars with dominant frequencies up to ~3300{\mu}Hz, and we find that data for some targets are good enough to allow for a measurement of the rotational splitting. Modelling of the extracted parameters is performed by using grid-based methods using average parameters and individual frequencies together with spectroscopic parameters. For the target selection in C3, stars were chosen as in C1 and C2 to cover a wide range in parameter space to better understand the performance and noise characteristics. For C3 we still detected oscillations in 73% of the observed stars that we proposed. Future K2 campaigns hold great promise for the study of nearby clusters and the chemical evolution and age-metallicity relation of nearby field stars in the solar neighbourhood. We expect oscillations to be detected in ~388 short-cadence targets if the K2 mission continues until C18, which will greatly complement the ~500 detections of solar-like oscillations made for short-cadence targets during the nominal Kepler mission. For ~30-40 of these, including several members of the Hyades open cluster, we furthermore expect that inference from interferometry should be possible.

The Hyades open cluster was targeted during Campaign 4 (C4) of the NASA K2 mission, and short-cadence data were collected on a number of cool main-sequence stars. Here, we report results on two F-type stars that show detectable oscillations of a quality that allows asteroseismic analyses to be performed. These are the first ever detections of solar-like oscillations in main-sequence stars in an open cluster.

The discovery of lithium-rich giants contradicts expectations from canonical stellar evolution. Here we report on the serendipitous discovery of 20 Li-rich giants observed during the Gaia-ESO Survey, which includes the first nine Li-rich giant stars known towards the CoRoT fields. Most of our Li-rich giants have near-solar metallicities, and stellar parameters consistent with being before the luminosity bump. This is difficult to reconcile with deep mixing models proposed to explain lithium enrichment, because these models can only operate at later evolutionary stages: at or past the luminosity bump. In an effort to shed light on the Li-rich phenomenon, we highlight recent evidence of the tidal destruction of close-in hot Jupiters at the sub-giant phase. We note that when coupled with models of planet accretion, the observed destruction of hot Jupiters actually predicts the existence of Li-rich giant stars, and suggests Li-rich stars should be found early on the giant branch and occur more frequently with increasing metallicity. A comprehensive review of all known Li-rich giant stars reveals that this scenario is consistent with the data. However more evolved or metal-poor stars are less likely to host close-in giant planets, implying that their Li-rich origin requires an alternative explanation, likely related to mixing scenarios rather than external phenomena.

Context: Detailed oscillation spectra comprising individual frequencies for numerous solar-type stars and red giants are or will become available. These data can lead to a precise characterisation of stars. Aims: Our goal is to test and compare different methods for obtaining stellar properties from oscillation frequencies and spectroscopic constraints, in order to evaluate their accuracy and the reliability of the error bars. Methods: In the context of the SpaceInn network, we carried out a hare-and-hounds exercise in which one group produced "observed" oscillation spectra for 10 artificial solar-type stars, and various groups characterised these stars using either forward modelling or acoustic glitch signatures. Results: Results based on the forward modelling approach were accurate to 1.5 % (radius), 3.9 % (mass), 23 % (age), 1.5 % (surface gravity), and 1.8 % (mean density). For the two 1 Msun stellar targets, the accuracy on the age is better than 10 % thereby satisfying PLATO 2.0 requirements. The average accuracies for the acoustic radii of the base of the convection zone, the He II ionisation, and the Gamma_1 peak were 17 %, 2.4 %, and 1.9 %, respectively. Glitch fitting analysis seemed to be affected by aliasing problems for some of the targets. Conclusions: Forward modelling is the most accurate approach, but needs to be complemented by model-independent results from, e.g., glitch analysis. Furthermore, global optimisation algorithms provide more robust error bars.

Simulations predict that hot super-Earth sized exoplanets can have their envelopes stripped by photo-evaporation, which would present itself as a lack of these exoplanets. However, this absence in the exoplanet population has escaped a firm detection. Here we demonstrate, using asteroseismology on a sample of exoplanets and exoplanet candidates observed during the Kepler mission that, while there is an abundance of super-Earth sized exoplanets with low incident fluxes, none are found with high incident fluxes. We do not find any exoplanets with radii between 2.2 and 3.8 Earth radii with incident flux above 650 times the incident flux on Earth. This gap in the population of exoplanets is explained by evaporation of volatile elements and thus supports the predictions. The confirmation of a hot-super-Earth desert caused by evaporation will add an important constraint on simulations of planetary systems, since they must be able to reproduce the dearth of close-in super-Earths.

Our poor understanding of the boundaries of convective cores generates large uncertainties on the extent of these cores and thus on stellar ages. Our aim is to use asteroseismology to consistently measure the extent of convective cores in a sample of main-sequence stars whose masses lie around the mass-limit for having a convective core. We first test and validate a seismic diagnostic that was proposed to probe in a model-dependent way the extent of convective cores using the so-called $r_{010}$ ratios, which are built with $l=0$ and $l=1$ modes. We apply this procedure to 24 low-mass stars chosen among Kepler targets to optimize the efficiency of this diagnostic. For this purpose, we compute grids of stellar models with both the CESAM2k and MESA evolution codes, where the extensions of convective cores are modeled either by an instantaneous mixing or as a diffusion process. Among the selected targets, we are able to unambiguously detect convective cores in eight stars and we obtain seismic measurements of the extent of the mixed core in these targets with a good agreement between the CESAM2k and MESA codes. By performing optimizations using the Levenberg-Marquardt algorithm, we then obtain estimates of the amount of extra-mixing beyond the core that is required in CESAM2k to reproduce seismic observations for these eight stars and we show that this can be used to propose a calibration of this quantity. This calibration depends on the prescription chosen for the extra-mixing, but we find that it should be valid also for the code MESA, provided the same prescription is used. This study constitutes a first step towards the calibration of the extension of convective cores in low-mass stars, which will help reduce the uncertainties on the ages of these stars.

Dipole mixed pulsation modes of consecutive radial order have been detected for thousands of low-mass red-giant stars with the NASA space telescope Kepler. Such modes have the potential to reveal information on the physics of the deep stellar interior. Different methods have been proposed to derive an observed value for the gravity-mode period spacing, the most prominent one relying on a relation derived from asymptotic pulsation theory applied to the gravity-mode character of the mixed modes. Our aim is to compare results based on this asymptotic relation with those derived from an empirical approach for three pulsating red-giant stars. We developed a data-driven method to perform frequency extraction and mode identification. Next, we used the identified dipole mixed modes to determine the gravity-mode period spacing by means of an empirical method and by means of the asymptotic relation. In our methodology, we consider the phase offset, $\epsilon_{\mathrm{g}}$, of the asymptotic relation as a free parameter. Using the frequencies of the identified dipole mixed modes for each star in the sample, we derived a value for the gravity-mode period spacing using the two different methods. These differ by less than 5%. The average precision we achieved for the period spacing derived from the asymptotic relation is better than 1%, while that of our data-driven approach is 3%. Good agreement is found between values for the period spacing derived from the asymptotic relation and from the empirical method. Full abstract in PDF file.

The angle $\psi$ between a planet's orbital axis and the spin axis of its parent star is an important diagnostic of planet formation, migration, and tidal evolution. We seek empirical constraints on $\psi$ by measuring the stellar inclination $i_{\rm s}$ via asteroseismology for an ensemble of 25 solar-type hosts observed with NASA's Kepler satellite. Our results for $i_{\rm s}$ are consistent with alignment at the 2-$\sigma$ level for all stars in the sample, meaning that the system surrounding the red-giant star Kepler-56 remains as the only unambiguous misaligned multiple-planet system detected to date. The availability of a measurement of the projected spin-orbit angle $\lambda$ for two of the systems allows us to estimate $\psi$. We find that the orbit of the hot-Jupiter HAT-P-7b is likely to be retrograde ($\psi=116.4^{+30.2}_{-14.7}\:{\rm deg}$), whereas that of Kepler-25c seems to be well aligned with the stellar spin axis ($\psi=12.6^{+6.7}_{-11.0}\:{\rm deg}$). While the latter result is in apparent contradiction with a statement made previously in the literature that the multi-transiting system Kepler-25 is misaligned, we show that the results are consistent, given the large associated uncertainties. Finally, we perform a hierarchical Bayesian analysis based on the asteroseismic sample in order to recover the underlying distribution of $\psi$. The ensemble analysis suggests that the directions of the stellar spin and planetary orbital axes are correlated, as conveyed by a tendency of the host stars to display large inclination values.

A knowledge of stellar ages is crucial for our understanding of many astrophysical phenomena, and yet ages can be difficult to determine. As they become older, stars lose mass and angular momentum, resulting in an observed slowdown in surface rotation. The technique of 'gyrochronology' uses the rotation period of a star to calculate its age. However, stars of known age must be used for calibration, and, until recently, the approach was untested for old stars (older than 1 gigayear, Gyr). Rotation periods are now known for stars in an open cluster of intermediate age (NGC 6819; 2.5 Gyr old), and for old field stars whose ages have been determined with asteroseismology. The data for the cluster agree with previous period-age relations, but these relations fail to describe the asteroseismic sample. Here we report stellar evolutionary modelling, and confirm the presence of unexpectedly rapid rotation in stars that are more evolved than the Sun. We demonstrate that models that incorporate dramatically weakened magnetic braking for old stars can---unlike existing models---reproduce both the asteroseismic and the cluster data. Our findings might suggest a fundamental change in the nature of ageing stellar dynamos, with the Sun being close to the critical transition to much weaker magnetized winds. This weakened braking limits the diagnostic power of gyrochronology for those stars that are more than halfway through their main-sequence lifetimes.

Magnetic fields play a role in almost all stages of stellar evolution. Most low-mass stars, including the Sun, show surface fields that are generated by dynamo processes in their convective envelopes. Intermediate-mass stars do not have deep convective envelopes, although 10% exhibit strong surface fields that are presumed to be residuals from the stellar formation process. These stars do have convective cores that might produce internal magnetic fields, and these might even survive into later stages of stellar evolution, but information has been limited by our inability to measure the fields below the stellar surface. Here we use asteroseismology to study the occurrence of strong magnetic fields in the cores of low- and intermediate-mass stars. We have measured the strength of dipolar oscillation modes, which can be suppressed by a strong magnetic field in the core, in over 3600 red giant stars observed by Kepler. About 20% of our sample show mode suppression but this fraction is a strong function of mass. Strong core fields only occur in red giants above 1.1 solar masses (1.1Msun), and the occurrence rate is at least 60% for intermediate-mass stars (1.6--2.0Msun), indicating that powerful dynamos were very common in the convective cores of these stars.

Asteroseismology can make a substantial contribution to our understanding of the formation history and evolution of our Galaxy by providing precisely determined stellar properties for thousands of stars in different regions of the Milky Way. We present here the different sets of observables used in determining asteroseismic stellar properties, the typical level of precision obtained, the current status of results for ages of dwarfs and giants and the improvements than can be expected in the near future in the context of Galactic archaeology.

Kepler-454 (KOI-273) is a relatively bright (V = 11.69 mag), Sun-like starthat hosts a transiting planet candidate in a 10.6 d orbit. From spectroscopy, we estimate the stellar temperature to be 5687 +/- 50 K, its metallicity to be [m/H] = 0.32 +/- 0.08, and the projected rotational velocity to be v sin i <2.4 km s-1. We combine these values with a study of the asteroseismic frequencies from short cadence Kepler data to estimate the stellar mass to be 1.028+0:04-0:03 M_Sun, the radius to be 1.066 +/- 0.012 R_Sun and the age to be 5.25+1:41-1:39 Gyr. We estimate the radius of the 10.6 d planet as 2.37 +/- 0.13 R_Earth. Using 63 radial velocity observations obtained with the HARPS-N spectrograph on the Telescopio Nazionale Galileo and 36 observations made with the HIRES spectrograph at Keck Observatory, we measure the mass of this planet to be 6.8 +/- 1.4M_Earth. We also detect two additional non-transiting companions, a planet with a minimum mass of 4.46 +/- 0.12 M_J in a nearly circular 524 d orbit and a massive companion with a period >10 years and mass >12.1M_J . The twelve exoplanets with radii <2.7 R_Earth and precise mass measurements appear to fall into two populations, with those <1.6 R_Earth following an Earth-like composition curve and larger planets requiring a significant fraction of volatiles. With a density of 2.76 +/- 0.73 g cm-3, Kepler-454b lies near the mass transition between these two populations and requires the presence of volatiles and/or H/He gas.

We show that the masses of red giant stars can be well predicted from their photospheric carbon and nitrogen abundances, in conjunction with their spectroscopic stellar labels log g, Teff, and [Fe/H]. This is qualitatively expected from mass-dependent post main sequence evolution. We here establish an empirical relation between these quantities by drawing on 1,475 red giants with asteroseismic mass estimates from Kepler that also have spectroscopic labels from APOGEE DR12. We assess the accuracy of our model, and find that it predicts stellar masses with fractional r.m.s. errors of about 14% (typically 0.2 Msun). From these masses, we derive ages with r.m.s errors of 40%. This empirical model allows us for the first time to make age determinations (in the range 1-13 Gyr) for vast numbers of giant stars across the Galaxy. We apply our model to 52,000 stars in APOGEE DR12, for which no direct mass and age information was previously available. We find that these estimates highlight the vertical age structure of the Milky Way disk, and that the relation of age with [alpha/M] and metallicity is broadly consistent with established expectations based on detailed studies of the solar neighbourhood.

\Kepler has revolutionised our understanding of both exoplanets and their host stars. Asteroseismology is a valuable tool in the characterisation of stars and \Kepler is an excellent observing facility to perform asteroseismology. Here we select a sample of 35 \Kepler solar-type stars which host transiting exoplanets (or planet candidates) with detected solar-like oscillations. Using available \Kepler short cadence data up to Quarter 16 we create power spectra optimised for asteroseismology of solar-type stars. We identify modes of oscillation and estimate mode frequencies by ``peak bagging'' using a Bayesian MCMC framework. In addition, we expand the methodology of quality assurance using a Bayesian unsupervised machine learning approach. We report the measured frequencies of the modes of oscillation for all 35 stars and frequency ratios commonly used in detailed asteroseismic modelling. Due to the high correlations associated with frequency ratios we report the covariance matrix of all frequencies measured and frequency ratios calculated. These frequencies, frequency ratios, and covariance matrices can be used to obtain tight constraint on the fundamental parameters of these planet-hosting stars.

The existence of a vertical age gradient in the Milky Way disc has been indirectly known for long. Here, we measure it directly for the first time with seismic ages, using red giants observed by Kepler. We use Stroemgren photometry to gauge the selection function of asteroseismic targets, and derive colour and magnitude limits where giants with measured oscillations are representative of the underlying population in the field. Limits in the 2MASS system are also derived. We lay out a method to assess and correct for target selection effects independent of Galaxy models. We find that low mass, i.e. old red giants dominate at increasing Galactic heights, whereas closer to the Galactic plane they exhibit a wide range of ages and metallicities. Parametrizing this as a vertical gradient returns approximately 4 Gyr/kpc for the disc we probe, although with a large dispersion of ages at all heights. The ages of stars show a smooth distribution over the last 10 Gyr, consistent with a mostly quiescent evolution for the Milky Way disc since a redshift of about 2. We also find a flat age-metallicity relation for disc stars. Finally, we show how to use secondary clump stars to estimate the present-day intrinsic metallicity spread, and suggest using their number count as a new proxy for tracing the ageing of the disc. This work highlights the power of asteroseismology for Galactic studies; however, we also emphasize the need for better constraints on stellar mass-loss, which is a major source of systematic age uncertainties in red giant stars.

The Apache Point Observatory Galactic Evolution Experiment (APOGEE), one of the programs in the Sloan Digital Sky Survey III (SDSS-III), has now completed its systematic, homogeneous spectroscopic survey sampling all major populations of the Milky Way. After a three year observing campaign on the Sloan 2.5-m Telescope, APOGEE has collected a half million high resolution (R~22,500), high S/N (>100), infrared (1.51-1.70 microns) spectra for 146,000 stars, with time series information via repeat visits to most of these stars. This paper describes the motivations for the survey and its overall design---hardware, field placement, target selection, operations---and gives an overview of these aspects as well as the data reduction, analysis and products. An index is also given to the complement of technical papers that describe various critical survey components in detail. Finally, we discuss the achieved survey performance and illustrate the variety of potential uses of the data products by way of a number of science demonstrations, which span from time series analysis of stellar spectral variations and radial velocity variations from stellar companions, to spatial maps of kinematics, metallicity and abundance patterns across the Galaxy and as a function of age, to new views of the interstellar medium, the chemistry of star clusters, and the discovery of rare stellar species. As part of SDSS-III Data Release 12, all of the APOGEE data products are now publicly available.

The nearly continuous light curves with micromagnitude precision provided by the space mission Kepler are revolutionising our view of pulsating stars. They have revealed a vast sea of low-amplitude pulsation modes that were undetectable from Earth. The long time base of Kepler light curves allows an accurate determination of frequencies and amplitudes of pulsation modes needed for in-depth asteroseismic modeling. However, for an asteroseismic study to be successful, the first estimates of stellar parameters need to be known and they can not be derived from the Kepler photometry itself. The Kepler Input Catalog (KIC) provides values for the effective temperature, the surface gravity and the metallicity, but not always with a sufficient accuracy. Moreover, information on the chemical composition and rotation rate is lacking. We are collecting low-resolution spectra for objects in the Kepler field of view with the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, Xinglong observatory, China). All of the requested fields have now been observed at least once. In this paper we describe those observations and provide a database of use to the whole astronomical community.

NASA's re-purposed Kepler mission -- dubbed K2 -- has brought new scientific opportunities that were not anticipated for the original Kepler mission. One science goal that makes optimal use of K2's capabilities, in particular its 360-degree ecliptic field of view, is galactic archaeology -- the study of the evolution of the Galaxy from the fossil stellar record. The thrust of this research is to exploit high-precision, time-resolved photometry from K2 in order to detect oscillations in red giant stars. This asteroseismic information can provide estimates of stellar radius (hence distance), mass and age of vast numbers of stars across the Galaxy. Here we present the initial analysis of a subset of red giants, observed towards the North Galactic Gap, during the mission's first full science campaign. We investigate the feasibility of using K2 data for detecting oscillations in red giants that span a range in apparent magnitude and evolutionary state (hence intrinsic luminosity). We demonstrate that oscillations are detectable for essentially all cool giants within the $\log g$ range $\sim 1.9-3.2$. Our detection is complete down to $\mathit{Kp}\sim 14.5$, which results in a seismic sample with little or no detection bias. This sample is ideally suited to stellar population studies that seek to investigate potential shortcomings of contemporary Galaxy models.

We present the first detections by the NASA K2 Mission of oscillations in solar-type stars, using short-cadence data collected during K2 Campaign\,1 (C1). We understand the asteroseismic detection thresholds for C1-like levels of photometric performance, and we can detect oscillations in subgiants having dominant oscillation frequencies around $1000\,\rm \mu Hz$. Changes to the operation of the fine-guidance sensors are expected to give significant improvements in the high-frequency performance from C3 onwards. A reduction in the excess high-frequency noise by a factor of two-and-a-half in amplitude would bring main-sequence stars with dominant oscillation frequencies as high as ${\simeq 2500}\,\rm \mu Hz$ into play as potential asteroseismic targets for K2.

We present a study of 33 {\it Kepler} planet-candidate host stars for which asteroseismic observations have sufficiently high signal-to-noise ratio to allow extraction of individual pulsation frequencies. We implement a new Bayesian scheme that is flexible in its input to process individual oscillation frequencies, combinations of them, and average asteroseismic parameters, and derive robust fundamental properties for these targets. Applying this scheme to grids of evolutionary models yields stellar properties with median statistical uncertainties of 1.2\% (radius), 1.7\% (density), 3.3\% (mass), 4.4\% (distance), and 14\% (age), making this the exoplanet host-star sample with the most precise and uniformly determined fundamental parameters to date. We assess the systematics from changes in the solar abundances and mixing-length parameter, showing that they are smaller than the statistical errors. We also determine the stellar properties with three other fitting algorithms and explore the systematics arising from using different evolution and pulsation codes, resulting in 1\% in density and radius, and 2\% and 7\% in mass and age, respectively. We confirm previous findings of the initial helium abundance being a source of systematics comparable to our statistical uncertainties, and discuss future prospects for constraining this parameter by combining asteroseismology and data from space missions. Finally we compare our derived properties with those obtained using the global average asteroseismic observables along with effective temperature and metallicity, finding an excellent level of agreement. Owing to selection effects, our results show that the majority of the high signal-to-noise ratio asteroseismic {\it Kepler} host stars are older than the Sun.

We derive age constraints for 1639 red giants in the APOKASC sample for which seismic parameters from Kepler, as well as effective temperatures, metallicities and [alpha/Fe] values from APOGEE DR12 are available. We investigate the relation between age and chemical abundances for these stars, using a simple and robust approach to obtain ages. We first derive stellar masses using standard seismic scaling relations, then determine the maximum possible age for each star as function of its mass and metallicity, independently of its evolutionary stage. While the overall trend between maximum age and chemical abundances is a declining fraction of young stars with increasing [alpha/Fe], at least 14 out of 241 stars with [alpha/Fe]>0.13 are younger than 6 Gyr. Five stars with [alpha/Fe]>0.2 have ages below 4 Gyr. We examine the effect of modifications in the standard seismic scaling relations, as well as the effect of very low helium fractions, but these changes are not enough to make these stars as old as usually expected for alpha-rich stars (i.e., ages greater than 8-9 Gyr). Such unusual alpha-rich young stars have also been detected by other surveys, but defy simple explanations in a galaxy evolution context.

We describe three useful applications of asteroseismology in the context of exoplanet science: (1) the detailed characterisation of exoplanet host stars; (2) the measurement of stellar inclinations; and (3) the determination of orbital eccentricity from transit duration making use of asteroseismic stellar densities. We do so using the example system Kepler-410 (Van Eylen et al. 2014). This is one of the brightest (V = 9.4) Kepler exoplanet host stars, containing a small (2.8 Rearth) transiting planet in a long orbit (17.8 days), and one or more additional non-transiting planets as indicated by transit timing variations. The validation of Kepler-410 (KOI-42) was complicated due to the presence of a companion star, and the planetary nature of the system was confirmed after analyzing a Spitzer transit observation as well as ground-based follow-up observations.

We report the discovery of Kepler-432b, a giant planet ($M_b = 5.41^{+0.32}_{-0.18} M_{\rm Jup}, R_b = 1.145^{+0.036}_{-0.039} R_{\rm Jup}$) transiting an evolved star $(M_\star = 1.32^{+0.10}_{-0.07} M_\odot, R_\star = 4.06^{+0.12}_{-0.08} R_\odot)$ with an orbital period of $P_b = 52.501129^{+0.000067}_{-0.000053}$ days. Radial velocities (RVs) reveal that Kepler-432b orbits its parent star with an eccentricity of $e = 0.5134^{+0.0098}_{-0.0089}$, which we also measure independently with asterodensity profiling (AP; $e=0.507^{+0.039}_{-0.114}$), thereby confirming the validity of AP on this particular evolved star. The well-determined planetary properties and unusually large mass also make this planet an important benchmark for theoretical models of super-Jupiter formation. Long-term RV monitoring detected the presence of a non-transiting outer planet (Kepler-432c; $M_c \sin{i_c} = 2.43^{+0.22}_{-0.24} M_{\rm Jup}, P_c = 406.2^{+3.9}_{-2.5}$ days), and adaptive optics imaging revealed a nearby (0\farcs87), faint companion (Kepler-432B) that is a physically bound M dwarf. The host star exhibits high signal-to-noise asteroseismic oscillations, which enable precise measurements of the stellar mass, radius and age. Analysis of the rotational splitting of the oscillation modes additionally reveals the stellar spin axis to be nearly edge-on, which suggests that the stellar spin is likely well-aligned with the orbit of the transiting planet. Despite its long period, the obliquity of the 52.5-day orbit may have been shaped by star-planet interaction in a manner similar to hot Jupiter systems, and we present observational and theoretical evidence to support this scenario. Finally, as a short-period outlier among giant planets orbiting giant stars, study of Kepler-432b may help explain the distribution of massive planets orbiting giant stars interior to 1 AU.

\We present the sixth catalog of Kepler candidate planets based on nearly 4 years of high precision photometry. This catalog builds on the legacy of previous catalogs released by the Kepler project and includes 1493 new Kepler Objects of Interest (KOIs) of which 554 are planet candidates, and 131 of these candidates have best fit radii <1.5 R_earth. This brings the total number of KOIs and planet candidates to 7305 and 4173 respectively. We suspect that many of these new candidates at the low signal-to-noise limit may be false alarms created by instrumental noise, and discuss our efforts to identify such objects. We re-evaluate all previously published KOIs with orbital periods of >50 days to provide a consistently vetted sample that can be used to improve planet occurrence rate calculations. We discuss the performance of our planet detection algorithms, and the consistency of our vetting products. The full catalog is publicly available at the NASA Exoplanet Archive.

The first discoveries of exoplanets around Sun-like stars have fueled efforts to find ever smaller worlds evocative of Earth and other terrestrial planets in the Solar System. While gas-giant planets appear to form preferentially around metal-rich stars, small planets (with radii less than four Earth radii) can form under a wide range of metallicities. This implies that small, including Earth-size, planets may have readily formed at earlier epochs in the Universe's history when metals were far less abundant. We report Kepler spacecraft observations of KOI-3158, a metal-poor Sun-like star from the old population of the Galactic thick disk, which hosts five planets with sizes between Mercury and Venus. We used asteroseismology to directly measure a precise age of 11.2+/-1.0 Gyr for the host star, indicating that KOI-3158 formed when the Universe was less than 20% of its current age and making it the oldest known system of terrestrial-size planets. We thus show that Earth-size planets have formed throughout most of the Universe's 13.8-billion-year history, providing scope for the existence of ancient life in the Galaxy.

The chemical composition of stars hosting small exoplanets (with radii less than four Earth radii) appears to be more diverse than that of gas-giant hosts, which tend to be metal-rich. This implies that small, including Earth-size, planets may have readily formed at earlier epochs in the Universe's history when metals were more scarce. We report Kepler spacecraft observations of Kepler-444, a metal-poor Sun-like star from the old population of the Galactic thick disk and the host to a compact system of five transiting planets with sizes between those of Mercury and Venus. We validate this system as a true five-planet system orbiting the target star and provide a detailed characterization of its planetary and orbital parameters based on an analysis of the transit photometry. Kepler-444 is the densest star with detected solar-like oscillations. We use asteroseismology to directly measure a precise age of 11.2+/-1.0 Gyr for the host star, indicating that Kepler-444 formed when the Universe was less than 20% of its current age and making it the oldest known system of terrestrial-size planets. We thus show that Earth-size planets have formed throughout most of the Universe's 13.8-billion-year history, leaving open the possibility for the existence of ancient life in the Galaxy. The age of Kepler-444 not only suggests that thick-disk stars were among the hosts to the first Galactic planets, but may also help to pinpoint the beginning of the era of planet formation.

Asteroseismology has the capability of delivering stellar properties which would otherwise be inaccessible, such as radii, masses and thus ages of stars. When this information is coupled with classical determinations of stellar parameters, such as metallicities, effective temperatures and angular diameters, powerful new diagnostics for stellar and Galactic studies can be obtained. The ongoing Stroemgren survey for Asteroseismology and Galactic Archaeology (SAGA) is pursuing such a goal, by determining photometric stellar parameters for stars with seismic oscillations measured by the Kepler satellite. As the survey continues and expands in sample size, SAGA will provide an unprecedented opportunity to constrain theories of the evolution of the Milky Way disc.

We present the first APOKASC catalog of spectroscopic and asteroseismic properties of 1916 red giants observed in the Kepler fields. The spectroscopic parameters provided from the Apache Point Observatory Galactic Evolution Experiment project are complemented with asteroseismic surface gravities, masses, radii, and mean densities determined by members of the Kepler Asteroseismology Science Consortium. We assess both random and systematic sources of error and include a discussion of sample selection for giants in the Kepler fields. Total uncertainties in the main catalog properties are of order 80 K in Teff , 0.06 dex in [M/H], 0.014 dex in log g, and 12% and 5% in mass and radius, respectively; these reflect a combination of systematic and random errors. Asteroseismic surface gravities are substantially more precise and accurate than spectroscopic ones, and we find good agreement between their mean values and the calibrated spectroscopic surface gravities. There are, however, systematic underlying trends with Teff and log g. Our effective temperature scale is between 0-200 K cooler than that expected from the Infrared Flux Method, depending on the adopted extinction map, which provides evidence for a lower value on average than that inferred for the Kepler Input Catalog (KIC). We find a reasonable correspondence between the photometric KIC and spectroscopic APOKASC metallicity scales, with increased dispersion in KIC metallicities as the absolute metal abundance decreases, and offsets in Teff and log g consistent with those derived in the literature. We present mean fitting relations between APOKASC and KIC observables and discuss future prospects, strengths, and limitations of the catalog data.

Asteroseismic investigations based on the wealth of data now available,in particular from the CoRoT and Kepler missions, require a good understanding of the relation between the observed quantities and the properties of the underlying stellar structure. Kallinger et al. 2012 found a relation between their determination of the asymptotic phase of radial oscillations in evolved stars and the evolutionary state, separating ascending-branch red giants from helium-burning stars in the `red clump'. Here we provide a detailed analysis of this relation, which is found to derive from differences between these two classes of stars in the thermodynamic state of the convective envelope. There is potential for distinguishing red giants and clump stars based on the phase determined from observations that are too short to allow distinction based on determination of the period spacing for mixed modes. The analysis of the phase may also point to a better understanding of the potential for using the helium-ionization-induced acoustic glitch to determine the helium abundance in the envelopes of these stars.

The Sloan Digital Sky Survey III's Apache Point Observatory Galactic Evolution Experiment (APOGEE) is a high-resolution near-infrared spectroscopic survey covering all of the major components of the Galaxy, including the dust-obscured regions of the inner Milky Way disk and bulge. Here we present a sample of 10,341 likely red-clump stars (RC) from the first two years of APOGEE operations, selected based on their position in color-metallicity-surface-gravity-effective-temperature space using a new method calibrated using stellar-evolution models and high-quality asteroseismology data. The narrowness of the RC locus in color-metallicity-luminosity space allows us to assign distances to the stars with an accuracy of 5 to 10%. The sample extends to typical distances of about 3 kpc from the Sun, with some stars out to 8 kpc, and spans a volume of approximately 100 kpc^3 over 5 kpc <~ R <~ 14 kpc, |Z| <~ 2 kpc, and -15 deg <~ Galactocentric azimuth <~ 30 deg. The APOGEE red-clump (APOGEE-RC) catalog contains photometry from 2MASS, reddening estimates, distances, line-of-sight velocities, stellar parameters and elemental abundances determined from the high-resolution APOGEE spectra, and matches to major proper motion catalogs. We determine the survey selection function for this data set and discuss how the RC selection samples the underlying stellar populations. We use this sample to limit any azimuthal variations in the median metallicity within the ~45 degree-wide azimuthal region covered by the current sample to be <= 0.02 dex, which is more than an order of magnitude smaller than the radial metallicity gradient. This result constrains coherent non-axisymmetric flows within a few kpc from the Sun.

The measurement of obliquities in star-planet systems is of great importance for the understanding of planet system formation and evolution. The bright and well studied HAT-P-7 system is intriguing as several Rossiter-McLaughlin (RM) measurements found a large projected obliquity in this system, but it was so far not possible to determine if the orbit is polar and/or retrograde. The goal of this study is to measure the stellar inclination and hereby the full 3D obliquity of the HAT-P-7 system instead of only the 2D projection as measured by the RM effect. In addition we provide an updated set of stellar parameters for the star. We use the full set of available observations from Kepler spanning Q0-Q17 to produce the power spectrum of HAT-P-7. We extract oscillation mode frequencies via an MCMC peak-bagging routine, and use the results from this to estimate the stellar inclination angle. Combining this with the projected obliquity from RM and the inclination of the orbital plane allows us to determine the stellar obliquity. We use asteroseismology to model the star from the extracted frequencies using two different approaches to the modelling where either the MESA or the GARSTEC stellar evolution codes are adopted. Using our updated asteroseismic modelling we find, i.a., the following stellar parameters for HAT-P-7: M=1.51{+0.04}{-0.05}Msun, $R=2.00{+0.01}{-0.02}Rsun, and age = 2.07{+0.28}{-0.23} Gyr. Our asteroseismic modelling offers a high precision on the stellar parameters, for instance is the uncertainty on age of the order ~11%. For the stellar inclination we estimate i_star<36.5 deg., which translates to an obliquity between 83 and 111 deg. We find that the planet HAT-P-7b is likely retrograde in its orbit, and that the orbit is close to being polar. The new parameters for the star gives an updated planetary density of 0.65+-0.03 g cm^{-3}, which is lower than previous estimates.

We present the characterization of the Kepler-93 exoplanetary system, based on three years of photometry gathered by the Kepler spacecraft. The duration and cadence of the Kepler observations, in tandem with the brightness of the star, enable unusually precise constraints on both the planet and its host. We conduct an asteroseismic analysis of the Kepler photometry and conclude that the star has an average density of 1.652+/-0.006 g/cm^3. Its mass of 0.911+/-0.033 M_Sun renders it one of the lowest-mass subjects of asteroseismic study. An analysis of the transit signature produced by the planet Kepler-93b, which appears with a period of 4.72673978+/-9.7x10^-7 days, returns a consistent but less precise measurement of the stellar density, 1.72+0.02-0.28 g/cm^3. The agreement of these two values lends credence to the planetary interpretation of the transit signal. The achromatic transit depth, as compared between Kepler and the Spitzer Space Telescope, supports the same conclusion. We observed seven transits of Kepler-93b with Spitzer, three of which we conducted in a new observing mode. The pointing strategy we employed to gather this subset of observations halved our uncertainty on the transit radius ratio R_p/R_star. We find, after folding together the stellar radius measurement of 0.919+/-0.011 R_Sun with the transit depth, a best-fit value for the planetary radius of 1.481+/-0.019 R_Earth. The uncertainty of 120 km on our measurement of the planet's size currently renders it one of the most precisely measured planetary radii outside of the Solar System. Together with the radius, the planetary mass of 3.8+/-1.5 M_Earth corresponds to a rocky density of 6.3+/-2.6 g/cm^3. After applying a prior on the plausible maximum densities of similarly-sized worlds between 1--1.5 R_Earth, we find that Kepler-93b possesses an average density within this group.

We present a new method to obtain stellar properties for stars exhibiting solar-like oscillations in an easy, fast, and transparent way. The method, called Asteroseismology Made Easy (AME), can determine stellar masses, mean-densities, radii, and surface gravities, as well as estimate ages. In this writing we present AME as a visual and powerful tool which could be useful; in particular in the light of the large number of exoplanets being found. AME consists of a set of figures from which the stellar parameters are deduced. These figures are made from a grid of stellar evolutionary models that cover masses ranging from 0.7 Msun to 1.6 Msun in steps of 0.1 Msun and metallicities in the interval -0.3 dex <= [Fe/H] <= +0.3 dex in increments of 0.1 dex. The stellar evolutionary models are computed using the Modules for Experiments in Stellar Astrophysics (MESA) code with simple input physics. We have compared the results from AME with results for three groups of stars; stars with radii determined from interferometry (and measured parallaxes), stars with radii determined from measurements of their parallaxes (and calculated angular diameters), and stars with results based on the modelling of their individual oscillation frequencies. We find that a comparison of the radii from interferometry to those from AME yield a weighted mean of the fractional differences of just 2%. This is also the level of deviation that we find when we compare the parallax-based radii to the radii determined from AME. The comparison between independently determined stellar parameters and those found using AME show that our method can provide reliable stellar masses, radii, and ages, with median uncertainties in the order of 4%, 2%, and 25% respectively.

Asteroseismology has the capability of precisely determining stellar properties which would otherwise be inaccessible, such as radii, masses and thus ages of stars. When coupling this information with classical determinations of stellar parameters, such as metallicities, effective temperatures and angular diameters, powerful new diagnostics for Galactic studies can be obtained. The ongoing Stroemgren survey for Asteroseismology and Galactic Archaeology (SAGA) has the goal of transforming the Kepler field into a new benchmark for Galactic studies, similarly to the solar neighborhood. Here we present first results from a stripe centred at Galactic longitude 74deg and covering latitude from about 8 to 20deg, which includes almost 1000 K-giants with seismic information and the benchmark open cluster NGC 6819. We describe the coupling of classical and seismic parameters, the accuracy as well as the caveats of the derived effective temperatures, metallicities, distances, surface gravities, masses, and radii. Confidence in the achieved precision is corroborated by the detection of the first and secondary clump in a population of field stars with a ratio of 2 to 1, and by the negligible scatter in the seismic distances among NGC 6819 member stars. An assessment of the reliability of stellar parameters in the Kepler Input Catalogue is also performed, and the impact of our results for population studies in the Milky Way is discussed, along with the importance of an all-sky Stroemgren survey.

Fundamental stellar properties, such as mass, radius, and age, can be inferred using asteroseismology. Cool stars with convective envelopes have turbulent motions that can stochastically drive and damp pulsations. The properties of the oscillation frequency power spectrum can be tied to mass and radius through solar-scaled asteroseismic relations. Stellar properties derived using these scaling relations need verification over a range of metallicities. Because the age and mass of halo stars are well-constrained by astrophysical priors, they provide an independent, empirical check on asteroseismic mass estimates in the low-metallicity regime. We identify nine metal-poor red giants (including six stars that are kinematically associated with the halo) from a sample observed by both the Kepler space telescope and the Sloan Digital Sky Survey-III APOGEE spectroscopic survey. We compare masses inferred using asteroseismology to those expected for halo and thick-disk stars. Although our sample is small, standard scaling relations, combined with asteroseismic parameters from the APOKASC Catalog, produce masses that are systematically higher (<{\Delta}M>=0.17+/-0.05 Msun) than astrophysical expectations. The magnitude of the mass discrepancy is reduced by known theoretical corrections to the measured large frequency separation scaling relationship. Using alternative methods for measuring asteroseismic parameters induces systematic shifts at the 0.04 Msun level. We also compare published asteroseismic analyses with scaling relationship masses to examine the impact of using the frequency of maximum power as a constraint. Upcoming APOKASC observations will provide a larger sample of ~100 metal-poor stars, important for detailed asteroseismic characterization of Galactic stellar populations.

About 1% of giant stars have been shown to have large surface Li abundances, which is unexpected according to standard stellar evolution models. Several scenarios for lithium production have been proposed, but it is still unclear why these Li-rich giants exist. A missing piece in this puzzle is the knowledge of the exact stage of evolution of these stars. Using low-and-high-resolution spectroscopic observations, we have undertaken a survey of lithium-rich giants in the Kepler field. In this letter, we report the finding of the first confirmed Li-rich core-helium-burning giant, as revealed by asteroseismic analysis. The evolutionary timescales constrained by its mass suggest that Li-production most likely took place through non-canonical mixing at the RGB-tip, possibly during the helium flash.

The apparent size of stars is a crucial benchmark for fundamental stellar properties such as effective temperatures, radii and surface gravities. While interferometric measurements of stellar angular diameters are the most direct method to gauge these, they are still limited to relatively nearby and bright stars, which are saturated in most of the modern photometric surveys. This dichotomy prevents us from safely extending well calibrated relations to the faint stars targeted in large spectroscopic and photometric surveys. Here, we alleviate this obstacle by presenting SAAO near-infrared JHK observations of 55 stars: 16 of them have interferometric angular diameters, and the rest are in common with the 2MASS (unsaturated) dataset, allowing us to tie the effective temperatures and angular diameters derived via the Infrared Flux Method to the interferometric scale. We extend the test to recent interferometric measurements of unsaturated 2MASS stars, including giants, and the metal-poor benchmark target HD122563. With a critical evaluation of the systematics involved, we conclude that a 1% accuracy in fundamental stellar parameters is usually within reach. Caution, however, must be used when indirectly testing a temperature scale via colour relations, as well as when assessing the reliability of interferometric measurements, especially at sub-milliarcsec level. As a result, rather different effective temperature scales can be compatible with a given subset of interferometric data. We highlight some caveats to be aware of in such a quest, and suggest a simple method to check against systematics in fundamental measurements. A new diagnostic combination seismic radii with astrometric distances is also presented.

We present revised properties for 196,468 stars observed by the NASA Kepler Mission and used in the analysis of Quarter 1-16 (Q1-Q16) data to detect and characterize transiting exoplanets. The catalog is based on a compilation of literature values for atmospheric properties (temperature, surface gravity, and metallicity) derived from different observational techniques (photometry, spectroscopy, asteroseismology, and exoplanet transits), which were then homogeneously fitted to a grid of Dartmouth stellar isochrones. We use broadband photometry and asteroseismology to characterize 11,532 Kepler targets which were previously unclassified in the Kepler Input Catalog (KIC). We report the detection of oscillations in 2,762 of these targets, classifying them as giant stars and increasing the number of known oscillating giant stars observed by Kepler by ~20% to a total of ~15,500 stars. Typical uncertainties in derived radii and masses are ~40% and ~20%, respectively, for stars with photometric constraints only, and 5-15% and ~10% for stars based on spectroscopy and/or asteroseismology, although these uncertainties vary strongly with spectral type and luminosity class. A comparison with the Q1-Q12 catalog shows a systematic decrease in radii for M dwarfs, while radii for K dwarfs decrease or increase depending on the Q1-Q12 provenance (KIC or Yonsei-Yale isochrones). Radii of F-G dwarfs are on average unchanged, with the exception of newly identified giants. The Q1-Q16 star properties catalog is a first step towards an improved characterization of all Kepler targets to support planet occurrence studies.

We present the detection of l=4 and l=5 modes in power spectra of the Sun, constructed from 12 yr full-disk VIRGO-SPM data sets. A method for enhancing the detectability of these modes in asteroseismic targets is presented and applied to Kepler data of the two solar analogues 16 Cyg A and B. For these targets we see indications of a signal from l=4 modes, while nothing is yet seen for l=5 modes. We further simulate the power spectra of these stars and from this we estimate that it should indeed be possible to see such indications of l=4 modes at the present length of the data sets. In the simulation process we briefly look into the apparent misfit between observed and calculated mode visibilities. We predict that firm detections of at least l=4 should be possible in any case at the end of the Kepler mission. For l=5 we do not predict any firm detections from Kepler data.

We present a novel method for estimating lower-limit surface gravities log g of Kepler targets whose data do not allow the detection of solar-like oscillations. The method is tested using an ensemble of solar-type stars observed in the context of the Kepler Asteroseismic Science Consortium. We then proceed to estimate lower-limit log g for a cohort of Kepler solar-type planet-candidate host stars with no detected oscillations. Limits on fundamental stellar properties, as provided by this work, are likely to be useful in the characterization of the corresponding candidate planetary systems. Furthermore, an important byproduct of the current work is the confirmation that amplitudes of solar-like oscillations are suppressed in stars with increased levels of surface magnetic activity.

We report on the masses, sizes, and orbits of the planets orbiting 22 Kepler stars. There are 49 planet candidates around these stars, including 42 detected through transits and 7 revealed by precise Doppler measurements of the host stars. Based on an analysis of the Kepler brightness measurements, along with high-resolution imaging and spectroscopy, Doppler spectroscopy, and (for 11 stars) asteroseismology, we establish low false-positive probabilities for all of the transiting planets (41 of 42 have a false-positive probability under 1%), and we constrain their sizes and masses. Most of the transiting planets are smaller than 3X the size of Earth. For 16 planets, the Doppler signal was securely detected, providing a direct measurement of the planet's mass. For the other 26 planets we provide either marginal mass measurements or upper limits to their masses and densities; in many cases we can rule out a rocky composition. We identify 6 planets with densities above 5 g/cc, suggesting a mostly rocky interior for them. Indeed, the only planets that are compatible with a purely rocky composition are smaller than ~2 R_earth. Larger planets evidently contain a larger fraction of low-density material (H, He, and H2O).

We confirm the Kepler planet candidate Kepler-410b (KOI-42b) as a Neptune sized exoplanet on a 17.8 day, eccentric orbit around the bright (Kp = 9.4) star Kepler-410A. This is the third brightest confirmed planet host star in the Kepler field and one of the brightest hosts of all currently known transiting exoplanets. Kepler-410 consists of a blend between the fast rotating planet host star (Kepler-410A) and a fainter star (Kepler-410B), which has complicated the confirmation of the planetary candidate. Employing asteroseismology, using constraints from the transit light curve, adaptive optics and speckle images, and Spitzer transit observations, we demonstrate that the candidate can only be an exoplanet orbiting Kepler-410A. Via asteroseismology we determine the following stellar and planetary parameters with high precision; M$_\star = 1.214 \pm 0.033$ M$_\odot$, R$_\star = 1.352 \pm 0.010$ R$_\odot$, Age = $2.76 \pm 0.54$ Gyr, planetary radius ($2.838 \pm 0.054$ R$_\oplus$), and orbital eccentricity ($0.17^{+0.07}_{-0.06}$). In addition, rotational splitting of the pulsation modes allows for a measurement of Kepler-410A's inclination and rotation rate. Our measurement of an inclination of $82.5^{+7.5}_{-2.5}$ [$^\circ$] indicates a low obliquity in this system. Transit timing variations indicate the presence of at least one additional (non-transiting) planet in the system.

For the very best and brightest asteroseismic solar-type targets observed by Kepler, the frequency precision is sufficient to determine the acoustic depths of the surface convective layer and the helium ionization zone. Such sharp features inside the acoustic cavity of the star, which we call acoustic glitches, create small oscillatory deviations from the uniform spacing of frequencies in a sequence of oscillation modes with the same spherical harmonic degree. We use these oscillatory signals to determine the acoustic locations of such features in 19 solar-type stars observed by the Kepler mission. Four independent groups of researchers utilized the oscillation frequencies themselves, the second differences of the frequencies and the ratio of the small and large separation to locate the base of the convection zone and the second helium ionization zone. Despite the significantly different methods of analysis, good agreement was found between the results of these four groups, barring a few cases. These results also agree reasonably well with the locations of these layers in representative models of the stars. These results firmly establish the presence of the oscillatory signals in the asteroseismic data and the viability of several techniques to determine the location of acoustic glitches inside stars.

Since the discovery of Kepler-10, the system has received considerable interest because it contains a small, rocky planet which orbits the star in less than a day. The system's parameters, announced by the Kepler team and subsequently used in further research, were based on only 5 months of data. We have reanalyzed this system using the full span of 29 months of Kepler photometric data, and obtained improved information about its star and the planets. A detailed asteroseismic analysis of the extended time series provides a significant improvement on the stellar parameters: Not only can we state that Kepler-10 is the oldest known rocky-planet-harboring system at 10.41 +/- 1.36 Gyr, but these parameters combined with improved planetary parameters from new transit fits gives us the radius of Kepler-10b to within just 125 km. A new analysis of the full planetary phase curve leads to new estimates on the planetary temperature and albedo, which remain degenerate in the Kepler band. Our modeling suggests that the flux level during the occultation is slightly lower than at the transit wings, which would imply that the nightside of this planet has a non-negligible temperature.

The continuous high-precision photometric observations provided by the CoRoT and Kepler space missions have allowed us to better understand the structure and dynamics of red giants using asteroseismic techniques. A small fraction of these stars shows dipole modes with unexpectedly low amplitudes. The reduction in amplitude is more pronounced for stars with higher frequency of maximum power. In this work we want to characterize KIC 8561221 in order to confirm that it is currently the least evolved star among this peculiar subset and to discuss several hypotheses that could help explain the reduction of the dipole mode amplitudes. We used Kepler short- and long-cadence data combined with spectroscopic observations to infer the stellar structure and dynamics of KIC 8561221. We then discussed different scenarios that could contribute to the reduction of the dipole amplitudes such as a fast rotating interior or the effect of a magnetic field on the properties of the modes. We also performed a detailed study of the inertia and damping of the modes. We have been able to characterize 37 oscillations modes, in particular, a few dipole modes above nu_max that exhibit nearly normal amplitudes. We have inferred a surface rotation period of around 91 days and uncovered the existence of a variation in the surface magnetic activity during the last 4 years. As expected, the internal regions of the star probed by the l = 2 and 3 modes spin 4 to 8 times faster than the surface. With our grid of standard models we are able to properly fit the observed frequencies. Our model calculation of mode inertia and damping give no explanation for the depressed dipole modes. A fast rotating core is also ruled out as a possible explanation. Finally, we do not have any observational evidence of the presence of a strong deep magnetic field inside the star.

Stars hosting hot Jupiters are often observed to have high obliquities, whereas stars with multiple co-planar planets have been seen to have low obliquities. This has been interpreted as evidence that hot-Jupiter formation is linked to dynamical disruption, as opposed to planet migration through a protoplanetary disk. We used asteroseismology to measure a large obliquity for Kepler-56, a red giant star hosting two transiting co-planar planets. These observations show that spin-orbit misalignments are not confined to hot-Jupiter systems. Misalignments in a broader class of systems had been predicted as a consequence of torques from wide-orbiting companions, and indeed radial-velocity measurements revealed a third companion in a wide orbit in the Kepler-56 system.

We use asteroseismic data obtained by the NASA Kepler Mission to estimate the fundamental properties of more than 500 main-sequence and sub-giant stars. Data obtained during the first 10 months of Kepler science operations were used for this work, when these solar-type targets were observed for one month each in a survey mode. Stellar properties have been estimated using two global asteroseismic parameters and complementary photometric and spectroscopic data. Homogeneous sets of effective temperatures were available for the entire ensemble from complementary photometry; spectroscopic estimates of T_eff and [Fe/H] were available from a homogeneous analysis of ground-based data on a subset of 87 stars. [Abbreviated version... see paper for full abstract.]

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimistic for observations in the ecliptic, provided that pointing resets of the spacecraft during regular desaturations of the two functioning reaction wheels are accurate at the < 1 arcsec level. This would make it possible to apply a post-hoc analysis that would recover most of the lost photometric precision. Without this post-hoc correction---and the accurate re-pointing it requires---the performance would probably be as poor as in the Kepler-field case. Critical to our conclusions for both fields is the assumed level of pointing noise (in the short-term jitter and the longer-term drift). We suggest that further tests will be needed to clarify our results once more detail and data on the expected pointing performance becomes available, and we offer our assistance in this work.

Accurate characterization of stellar populations is of prime importance to correctly understand the formation and evolution process of our Galaxy. The field of asteroseismology has been particularly successful in such an endeavor providing fundamental parameters for large samples of stars in different evolutionary phases. We present our results on determinations of masses, radii, and distances of stars in the CoRoT and Kepler fields, showing that we can map and date different regions of the galactic disk and distinguish gradients in the distribution of stellar properties at different heights. We further review how asteroseismic determinations can produce a unique set of constraints, including ages, outside the solar neighborhood for galactic chemical evolution models.

Asteroseismology, i.e. the study of the internal structures of stars via their global oscillations, is a valuable tool to obtain stellar parameters such as mass, radius, surface gravity and mean density. These parameters can be obtained using certain scaling relations which are based on an asymptotic approximation. Usually the observed oscillation parameters are assumed to follow these scaling relations. Recently, it has been questioned whether this is a valid approach, i.e., whether the order of the observed oscillation modes are high enough to be approximated with an asymptotic theory. In this work we use stellar models to investigate whether the differences between observable oscillation parameters and their asymptotic estimates are indeed significant. We compute the asymptotic values directly from the stellar models and derive the observable values from adiabatic pulsation calculations of the same models. We find that the extent to which the atmosphere is included in the models is a key parameter. Considering a larger extension of the atmosphere beyond the photosphere reduces the difference between the asymptotic and observable values of the large frequency separation. Therefore, we conclude that the currently suggested discrepancies in the scaling relations might have been overestimated. Hence, based on the results presented here we believe that the suggestions of Mosser et al. (2013) should not be followed without careful consideration.

Using asteroseismic data and stellar evolution models we make the first detection of a convective core in a Kepler field main-sequence star, putting a stringent constraint on the total size of the mixed zone and showing that extra mixing beyond the formal convective boundary exists. In a slightly less massive target the presence of a convective core cannot be conclusively discarded, and thus its remaining main-sequence life time is uncertain. Our results reveal that best-fit models found solely by matching individual frequencies of oscillations corrected for surface effects do not always properly reproduce frequency combinations. Moreover, slightly different criteria to define what the best-fit model is can lead to solutions with similar global properties but very different interior structures. We argue that the use of frequency ratios is a more reliable way to obtain accurate stellar parameters, and show that our analysis in field main-sequence stars can yield an overall precision of 1.5%, 4%, and 10% in radius, mass and age, respectively. We compare our results with those obtained from global oscillation properties, and discuss the possible sources of uncertainties in asteroseismic stellar modeling where further studies are still needed.

We have used asteroseismology to determine fundamental properties for 66 Kepler planet-candidate host stars, with typical uncertainties of 3% and 7% in radius and mass, respectively. The results include new asteroseismic solutions for four host stars with confirmed planets (Kepler-4, Kepler-14, Kepler-23 and Kepler-25) and increase the total number of Kepler host stars with asteroseismic solutions to 77. A comparison with stellar properties in the planet-candidate catalog by Batalha et al. shows that radii for subgiants and giants obtained from spectroscopic follow-up are systematically too low by up to a factor of 1.5, while the properties for unevolved stars are in good agreement. We furthermore apply asteroseismology to confirm that a large majority of cool main-sequence hosts are indeed dwarfs and not misclassified giants. Using the revised stellar properties, we recalculate the radii for 107 planet candidates in our sample, and comment on candidates for which the radii change from a previously giant-planet/brown-dwarf/stellar regime to a sub-Jupiter size, or vice versa. A comparison of stellar densities from asteroseismology with densities derived from transit models in Batalha et al. assuming circular orbits shows significant disagreement for more than half of the sample due to systematics in the modeled impact parameters, or due to planet candidates which may be in eccentric orbits. Finally, we investigate tentative correlations between host-star masses and planet candidate radii, orbital periods, and multiplicity, but caution that these results may be influenced by the small sample size and detection biases.

Solar-like oscillating giants observed by the space-borne satellites CoRoT and Kepler can be used as key tracers of stellar populations in the Milky Way. When combined with additional photometric/spectroscopic constraints, the pulsation spectra of solar-like oscillating giant stars not only reveal their radii, and hence distances, but also provide well-constrained estimates of their masses, which can be used as proxies for the ages of these evolved stars. In this contribution we provide supplementary material to the comparison we presented in Miglio et al. (2013) between populations of giants observed by CoRoT in the fields designated LRc01 and LRa01.

We present preliminary results on modelling KIC 7693833, the so far most metal-poor red-giant star observed by {\it Kepler}. From time series spanning several months, global oscillation parameters and individual frequencies were obtained and compared to theoretical calculations. Evolution models are calculated taking into account spectroscopic and asteroseismic constraints. The oscillation frequencies of the models were computed and compared to the {\it Kepler} data. In the range of mass computed, there is no preferred model, giving an uncertainty of about 30 K in $T_eff$, 0.02 dex in $\log g$, $0.7 \,R_\odot$ in radius and of about 2.5 Gyr in age.

Our understanding of how the Galaxy was formed and evolves is severely hampered by the lack of precise constraints on basic stellar properties such as distances, masses, and ages. Here, we show that solar-like pulsating red giants represent a well-populated class of accurate distance indicators, spanning a large age range, which can be used to map and date the Galactic disc in the regions probed by observations made by the CoRoT and Kepler space telescopes. When combined with photometric constraints, the pulsation spectra of such evolved stars not only reveal their radii, and hence distances, but also provide well-constrained estimates of their masses, which are reliable proxies for the ages of the stars. As a first application we consider red giants observed by CoRoT in two different parts of the Milky Way, and determine precise distances for ~2000 stars spread across nearly 15,000 pc of the Galactic disc, exploring regions which are a long way from the solar neighbourhood. We find significant differences in the mass distributions of these two samples which, by comparison with predictions of synthetic models of the Milky Way, we interpret as mainly due to the vertical gradient in the distribution of stellar masses (hence ages) in the disc. In the future, the availability of spectroscopic constraints for this sample of stars will not only improve the age determination, but also provide crucial constraints on age-velocity and age-metallicity relations at different Galactocentric radii and heights from the plane.

Asteroseismology has been extremely successful in determining the properties of stars in different evolutionary stages with a remarkable level of precision. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification of the results is needed. In this talk, I present a new technique developed to obtain stellar properties by coupling asteroseismic analysis with the InfraRed Flux Method. Using two global seismic observables and multi-band photometry, the technique determines masses, radii, effective temperatures, bolometric fluxes, and thus distances for field stars in a self-consistent manner. Applying our method to a sample of solar-like oscillators in the {\it Kepler} field that have accurate {\it Hipparcos} parallaxes, we find agreement in our distance determinations to better than 5%. Comparison with measurements of spectroscopic effective temperatures and interferometric radii also validate our results, and show that our technique can be applied to stars evolved beyond the main-sequence phase.

We present results of a long-baseline interferometry campaign using the PAVO beam combiner at the CHARA Array to measure the angular sizes of five main-sequence stars, one subgiant and four red giant stars for which solar-like oscillations have been detected by either Kepler or CoRoT. By combining interferometric angular diameters, Hipparcos parallaxes, asteroseismic densities, bolometric fluxes and high-resolution spectroscopy we derive a full set of near model-independent fundamental properties for the sample. We first use these properties to test asteroseismic scaling relations for the frequency of maximum power (nu_max) and the large frequency separation (Delta_nu). We find excellent agreement within the observational uncertainties, and empirically show that simple estimates of asteroseismic radii for main-sequence stars are accurate to <~4%. We furthermore find good agreement of our measured effective temperatures with spectroscopic and photometric estimates with mean deviations for stars between T_eff = 4600-6200 K of -22+/-32 K (with a scatter of 97K) and -58+/-31 K (with a scatter of 93 K), respectively. Finally we present a first comparison with evolutionary models, and find differences between observed and theoretical properties for the metal-rich main-sequence star HD173701. We conclude that the constraints presented in this study will have strong potential for testing stellar model physics, in particular when combined with detailed modelling of individual oscillation frequencies.

Accurately determining the properties of stars is of prime importance for characterizing stellar populations in our Galaxy. The field of asteroseismology has been thought to be particularly successful in such an endeavor for stars in different evolutionary stages. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification of the results is mandatory. With this purpose, we present a new technique to obtain stellar properties by coupling asteroseismic analysis with the InfraRed Flux Method. By using two global seismic observables and multi-band photometry, the technique allows us to obtain masses, radii, effective temperatures, bolometric fluxes, and hence distances for field stars in a self-consistent manner. We apply our method to 22 solar-like oscillators in the Kepler short-cadence sample, that have accurate Hipparcos parallaxes. Our distance determinations agree to better than 5%, while measurements of spectroscopic effective temperatures and interferometric radii also validate our results. We briefly discuss the potential of our technique for stellar population analysis and models of Galactic Chemical Evolution.

Solar-like oscillations have been observed by Kepler and CoRoT in several solar-type stars, thereby providing a way to probe the stars using asteroseismology. We provide the mode frequencies of the oscillations of various stars required to perform a comparison with those obtained from stellar modelling. We used a time series of nine months of data for each star. The 61 stars observed were categorised in three groups: simple, F-like and mixed-mode. The simple group includes stars for which the identification of the mode degree is obvious. The F-like group includes stars for which the identification of the degree is ambiguous. The mixed-mode group includes evolved stars for which the modes do not follow the asymptotic relation of low-degree frequencies. Following this categorisation, the power spectra of the 61 main sequence and subgiant stars were analysed using both maximum likelihood estimators and Bayesian estimators, providing individual mode characteristics such as frequencies, linewidths, and mode heights. We developed and describe a methodology for extracting a single set of mode frequencies from multiple sets derived by different methods and individual scientists. We report on how one can assess the quality of the fitted parameters using the likelihood ratio test and the posterior probabilities. We provide the mode frequencies of 61 stars (with their 1-sigma error bars), as well as their associated echelle diagrams.

Solar-like oscillations have been observed by {{\it Kepler}} and CoRoT in several solar-type stars. We study the variations of stellar p-mode linewidth as a function of effective temperature. Time series of 9 months of Kepler data have been used. The power spectra of 42 cool main-sequence stars and subgiants have been analysed using both Maximum Likelihood Estimators and Bayesian estimators, providing individual mode characteristics such as frequencies, linewidths and mode heights. Here we report on the mode linewidth at maximum power and at maximum mode height for these 42 stars as a function of effective temperature. We show that the mode linewidth at either maximum mode height or maximum amplitude follows a scaling relation with effective temperature, which is a combination of a power law plus a lower bound. The typical power law index is about 13 for the linewidth derived from the maximum mode height, and about 16 for the linewidth derived from the maximum amplitude while the lower bound is about 0.3 microHz and 0.7 microHz, respectively. We stress that this scaling relation is only valid for the cool main-sequence stars and subgiants, and does not have predictive power outside the temperature range of these stars.

Photometric observations made by the NASA Kepler Mission have led to a dramatic increase in the number of main-sequence and subgiant stars with detected solar-like oscillations. We present an ensemble asteroseismic analysis of 76 solar-type stars. Using frequencies determined from the Kepler time-series photometry, we have measured three asteroseismic parameters that characterize the oscillations: the large frequency separation (\Delta \nu), the small frequency separation between modes of l=0 and l=2 (\delta \nu_02), and the dimensionless offset (\epsilon). These measurements allow us to construct asteroseismic diagrams, namely the so-called C-D diagram of \delta \nu_02 versus \Delta \nu, and the recently re-introduced {\epsilon} diagram. We compare the Kepler results with previously observed solar-type stars and with theoretical models. The positions of stars in these diagrams places constraints on their masses and ages. Additionally, we confirm the observational relationship between {\epsilon} and T_eff that allows for the unambiguous determination of radial order and should help resolve the problem of mode identification in F stars.

The NASA Kepler mission is providing an unprecedented set of asteroseismic data. In particular, short-cadence lightcurves (~60s samplings), allow us to study solar-like stars covering a wide range of masses, spectral types and evolutionary stages. Oscillations have been observed in around 600 out of 2000 stars observed for one month during the survey phase of the Kepler mission. The measured light curves can present features related to the surface magnetic activity (starspots) and, thus we are able to obtain a good estimation of the surface (differential) rotation. In this work we establish the basis of such research and we show a potential method to find stars with fast surface rotations.

In addition to its search for extra-solar planets, the NASA Kepler Mission provides exquisite data on stellar oscillations. We report the detections of oscillations in 500 solartype stars in the Kepler field of view, an ensemble that is large enough to allow statistical studies of intrinsic stellar properties (such as mass, radius and age) and to test theories of stellar evolution. We find that the distribution of observed masses of these stars shows intriguing differences to predictions from models of synthetic stellar populations in the Galaxy.

We have analyzed solar-like oscillations in ~1700 stars observed by the Kepler Mission, spanning from the main-sequence to the red clump. Using evolutionary models, we test asteroseismic scaling relations for the frequency of maximum power (nu_max), the large frequency separation (Delta_nu) and oscillation amplitudes. We show that the difference of the Delta_nu-nu_max relation for unevolved and evolved stars can be explained by different distributions in effective temperature and stellar mass, in agreement with what is expected from scaling relations. For oscillation amplitudes, we show that neither (L/M)^s scaling nor the revised scaling relation by Kjeldsen & Bedding (2011) are accurate for red-giant stars, and demonstrate that a revised scaling relation with a separate luminosity-mass dependence can be used to calculate amplitudes from the main-sequence to red-giants to a precision of ~25%. The residuals show an offset particularly for unevolved stars, suggesting that an additional physical dependency is necessary to fully reproduce the observed amplitudes. We investigate correlations between amplitudes and stellar activity, and find evidence that the effect of amplitude suppression is most pronounced for subgiant stars. Finally, we test the location of the cool edge of the instability strip in the Hertzsprung-Russell diagram using solar-like oscillations and find the detections in the hottest stars compatible with a domain of hybrid stochastically excited and opacity driven pulsation.

Asteroseismology of solar-type stars has entered a new era of large surveys with the success of the NASA \textit{Kepler} mission, which is providing exquisite data on oscillations of stars across the Hertzprung-Russell (HR) diagram. From the time-series photometry, the two seismic parameters that can be most readily extracted are the large frequency separation ($\Delta\nu$) and the frequency of maximum oscillation power ($\nu_\mathrm{max}$). After the survey phase, these quantities are available for hundreds of solar-type stars. By scaling from solar values, we use these two asteroseismic observables to identify for the first time an evolutionary sequence of 1-M$_\odot$ field stars, without the need for further information from stellar models. Comparison of our determinations with the few available spectroscopic results shows an excellent level of agreement. We discuss the potential of the method for differential analysis throughout the main-sequence evolution, and the possibility of detecting twins of very well-known stars.

Red giants are evolved stars that have exhausted the supply of hydrogen in their cores and instead burn hydrogen in a surrounding shell. Once a red giant is sufficiently evolved, the helium in the core also undergoes fusion. Outstanding issues in our understanding of red giants include uncertainties in the amount of mass lost at the surface before helium ignition and the amount of internal mixing from rotation and other processes. Progress is hampered by our inability to distinguish between red giants burning helium in the core and those still only burning hydrogen in a shell. Asteroseismology offers a way forward, being a powerful tool for probing the internal structures of stars using their natural oscillation frequencies. Here we report observations of gravity-mode period spacings in red giants that permit a distinction between evolutionary stages to be made. We use high-precision photometry obtained with the Kepler spacecraft over more than a year to measure oscillations in several hundred red giants. We find many stars whose dipole modes show sequences with approximately regular period spacings. These stars fall into two clear groups, allowing us to distinguish unambiguously between hydrogen-shell-burning stars (period spacing mostly about 50 seconds) and those that are also burning helium (period spacing about 100 to 300 seconds).

The overall evolution of low-mass stars is heavily influenced by the processes occurring in the stellar interior. In particular, mixing processes in convectively unstable zones and overshooting regions affect the resulting observables and main sequence lifetime. We study the effects of different convective boundary definitions and mixing prescriptions in convective cores of low-mass stars, to discriminate the existence, size, and evolutionary stage of the central mixed zone by means of asteroseismology. We implemented the Ledoux criterion for convection in our stellar evolution code, together with a time-dependent diffusive approach for mixing of elements when semiconvective zones are present. We compared models with masses ranging from 1 M* to 2 M* computed with two different criteria for convective boundary definition and including different mixing prescriptions within and beyond the formal limits of the convective regions. Using calculations of adiabatic oscillations frequencies for a large set of models, we developed an asteroseismic diagnosis using only l=0 and l=1 modes based on the ratios of small to large separations r01 and r10 defined by Roxburgh & Vorontsov (2003). These variables are almost linear in the expected observable frequency range, and we show that their slope depends simultaneously on the central hydrogen content, the extent of the convective core, and the amplitude of the sound-speed discontinuity at the core boundary. By considering about 25 modes and an accuracy in the frequency determinations as expected from the CoRoT and Kepler missions, the technique we propose allows us to detect the presence of a convective core and to discriminate the different sizes of the homogeneously mixed central region without the need of a strong a priori for the stellar mass.

The primary science goal of the Kepler Mission is to provide a census of exoplanets in the solar neighborhood, including the identification and characterization of habitable Earth-like planets. The asteroseismic capabilities of the mission are being used to determine precise radii and ages for the target stars from their solar-like oscillations. Chaplin et al. (2010) published observations of three bright G-type stars, which were monitored during the first 33.5 days of science operations. One of these stars, the subgiant KIC 11026764, exhibits a characteristic pattern of oscillation frequencies suggesting that it has evolved significantly. We have derived asteroseismic estimates of the properties of KIC 11026764 from Kepler photometry combined with ground-based spectroscopic data. We present the results of detailed modeling for this star, employing a variety of independent codes and analyses that attempt to match the asteroseismic and spectroscopic constraints simultaneously. We determine both the radius and the age of KIC 11026764 with a precision near 1%, and an accuracy near 2% for the radius and 15% for the age. Continued observations of this star promise to reveal additional oscillation frequencies that will further improve the determination of its fundamental properties.

We present a brief overview of the history of attempts to obtain a clear detection of solar-like oscillations in cluster stars, and discuss the results on the first clear detection, which was made by the Kepler Asteroseismic Science Consortium (KASC) Working Group 2.

As it is long known, the presence of a convective region creates a discontinuity in the chemical profile of a star, which in turn translates into a sharp variation of the adiabatic sound speed. This variation produces an oscillatory behavior of the pulsation frequencies, to which low degree p-modes are sensitive. We investigate the possibility of detecting the signature related to the presence of a convective core in the frequency spectrum of low-mass stars by means of suitable frequency combinations (such as separations and ratios)

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

Mixing processes such as convection, overshooting and rotational mixing have long been known to affect the evolutionary properties of low-mass stars. While modeling a 1.2 Msun star, we encountered a semiconvective region outside the fully convective core, reminiscent of the well-known situation for massive stars. In this study we focus on low-mass stars presenting convective cores and, by applying different prescriptions for the determination of the convective boundaries and using different mixing descriptions for the dynamical processes in the core, we look for the effects of semiconvective mixing in the interior structure of the stars and its observable quantities. With this purpose, we have constructed different sets of evolutionary models using a stellar evolution code (GARSTEC), and analyzed the models looking for imprints of these processes.

Asteroseismology of stars in clusters has been a long-sought goal because the assumption of a common age, distance and initial chemical composition allows strong tests of the theory of stellar evolution. We report results from the first 34 days of science data from the Kepler Mission for the open cluster NGC 6819 -- one of four clusters in the field of view. We obtain the first clear detections of solar-like oscillations in the cluster red giants and are able to measure the large frequency separation and the frequency of maximum oscillation power. We find that the asteroseismic parameters allow us to test cluster-membership of the stars, and even with the limited seismic data in hand, we can already identify four possible non-members despite their having a better than 80% membership probability from radial velocity measurements. We are also able to determine the oscillation amplitudes for stars that span about two orders of magnitude in luminosity and find good agreement with the prediction that oscillation amplitudes scale as the luminosity to the power of 0.7. These early results demonstrate the unique potential of asteroseismology of the stellar clusters observed by Kepler.

One of the most dramatic events in the life of a low-mass star is the He flash, which takes place at the tip of the red giant branch (RGB) and is followed by a series of secondary flashes before the star settles into the zero-age horizontal branch (ZAHB). Yet, no stars have been positively identified in this key evolutionary phase, mainly for two reasons: first, this pre-ZAHB phase is very short compared to other major evolutionary phases in the life of a star; and second, these pre-ZAHB stars are expected to overlap the loci occupied by asymptotic giant branch (AGB), HB and RGB stars observed in the color-magnitude diagram (CMD). We investigate the possibility of detecting these stars through stellar pulsations, since some of them are expected to rapidly cross the Cepheid/RR Lyrae instability strip in their route from the RGB tip to the ZAHB, thus becoming pulsating stars along the way. As a consequence of their very high evolutionary speed, some of these stars may present anomalously large period change rates. We constructed an extensive grid of stellar models and produced pre-ZAHB Monte Carlo simulations appropriate for the case of the Galactic globular cluster M3 (NGC 5272), where a number of RR Lyrae stars with high period change rates are found. Our results suggest that some -- but certainly not all -- of the RR Lyrae stars in M3 with large period change rates are in fact pre-ZAHB pulsators.

One of the most dramatic events in the life of a low-mass star is the He flash, which takes place at the tip of the RGB and is followed by a series of secondary flashes before the star settles on the zero-age HB (ZAHB). Yet, no stars have ever been positively identified in this key phase in the life of a low-mass star (hereafter the "pre-ZAHB" phase). We investigate the possibility that some pre-ZAHB stars may cross the instability strip (IS), thus becoming variable. In particular, it has been suggested that some RR Lyrae stars (RRL) with high period change rates (P-dot) may in fact be pre-ZAHB stars. We present the first theoretical effort devoted to interpreting some of the high-P-dot stars as pre-ZAHB pulsators. We constructed a grid of evolutionary tracks using the Garching Stellar Evolution Code for a chemical composition appropriate to the case of the globular cluster M3, where a number of stars with high P-dot values are found. We follow each star's pre-ZAHB evolution in detail, compute periods and P-dot values for the stars lying inside the IS, and produce pre-ZAHB Monte Carlo simulations for the case of M3. Our results indicate that one should expect of order 1 pre-ZAHB star for every 60 or so bona-fide HB stars in M3. Among the pre-ZAHB stars, ~22% are expected to fall within the IS boundaries, presenting RRL-like pulsations. On average, the pre-ZAHB pulsators are expected to have longer periods than the bona-fide HB pulsators, and 76% of them are predicted to show negative P-dot values. The most likely P-dot value for the pre-ZAHB variables is ~-0.3 d/Myr, but more extreme P-dot values are also possible: 38% of the variables are predicted to have P-dot < -0.8 d/Myr. It appears likely, therefore, that some RRL stars in M3 with high (absolute) P-dot values are pre-ZAHB pulsators in disguise. (abridged)