Laue lenses constitute a promising option for concentrating soft gamma rays with a large collection area and reasonable focal lengths. In astronomy they could lead to increased telescope sensitivity by one to two orders of magnitude, in particular for faint nuclear gamma-ray lines, but also for continua like hard X-ray tails from a variety of compact objects. Other fields like Homeland security and nuclear medicine share the same need for more sensitive gamma-ray detection systems and could find applications for gamma-ray focusing optics. There are two primary challenges for developing Laue lenses: the search for high-reflectivity and reproducible crystals, and the development of a method to accurately orient and fix the thousands of crystals constituting a lens. In this paper we focus on the second topic. We used our dedicated X-ray beamline and Laue lens assembly station to build a breadboard lens made of 15 crystals. This allowed us to test our tools and methods, as well as our simulation code and calibration procedure. Although some critical points were identified, the results are very encouraging, with a crystal orientation distribution lower than $10''$, as required to build a Laue lens telescope dedicated to the study of Type Ia supernovae (30-m focal length). This breadboard lens represents an important step towards raising the technology readiness level of Laue lenses.

Laue lenses are an emerging technology based on diffraction in crystals that allows the concentration of soft gamma rays. This kind of optics that works in the 100 keV - 1.5 MeV band can be used to realize an high-sensitivity and high-angular resolution telescope (in a narrow field of view). This paper reviews the recent progresses that have been done in the development of efficient crystals, in the design study and in the modelisation of the answer of Laue lenses. Through the example of a new concept of 20 m focal length lens focusing in the 100 keV - 600 keV band, the performance of a telescope based on a Laue lens is presented. This lens uses the most efficient mosaic crystals in each sub-energy range in order to yield the maximum reflectivity. Imaging capabilities are investigated and shows promising results.

Crystals are the elementary constituents of Laue lenses, an emerging technology which could allow the realization of a space borne telescope 10 to 100 times more sensitive than existing ones in the 100 keV - 1.5 MeV energy range. This study addresses the current endeavor to the development of efficient crystals for the realization of a Laue lens. In the theoretical part 35 candidate-crystals both pure and two-components are considered. Their peak reflectivity at 100 keV, 500 keV and 1 MeV is calculated assuming they are mosaic crystals. It results that a careful selection of crystals can allow a reflectivity above 30% over the whole energy range, and even reaching 40% in its lower part. Experimentally, we concentrated on three different materials (Si_{1-x}Ge_x with gradient of composition, mosaic Cu and Au) that have been measured both at ESRF and ILL using highly-monochromatic beams ranging from 300 keV up to 816 keV. The aim was to check their homogeneity, quality and angular spread (mosaicity). These crystals have shown outstanding performance such as reflectivity up to 31% at ~600 keV (Au) or 60% at 300 keV (SiGe) and angular spread as low as 15 arcsec for Cu, fulfilling very well the requirements for a Laue lens application. Unexpectedly, we also noticed important discrepancies with Darwin's model when a crystal is measured using various energies.

The concept of a gamma-ray telescope based on a Laue lens offers the possibility to increase the sensitivity by more than an order of magnitude with respect to existing instruments. Laue lenses have been developed by our collaboration for several years : the main achievement of this R&D program was the CLAIRE lens prototype. Since then, the endeavour has been oriented towards the development of efficient diffracting elements (crystal slabs), the aim being to step from a technological Laue lens to a scientifically exploitable lens. The latest mission concept featuring a gamma-ray lens is the European Gamma-Ray Imager (GRI) which intends to make use of the Laue lens to cover energies from 200 keV to 1300 keV. Investigations of two promising materials, low mosaicity copper and gradient concentration silicon-germanium are presented in this paper. The measurements have been performed during three runs on beamline ID15A of the European Synchrotron Radiation Facility, and on the GAMS 4 instrument of the Institute Laue-Langevin (both in Grenoble, France) using highly monochromatic beam of energy close to 500 keV. Despite it was not perfectly homogeneous, the presented copper crystal exhibits peak reflectivity of 25% in accordance with theoretical predictions, and a mosaicity around 26 arcsec, the ideal range for the realization of a Laue lens such as GRI. Silicon-germanium featuring a constant gradient have been measured for the very first time at 500 keV. Two samples showed a quite homogeneous reflectivity reaching 26%, which is far from the 48% already observed in experimental crystals but a very encouraging beginning. This results have been used to estimate the performance of the GRI Laue lens design.